Wait while the treatment - Javascript?

Similar Questions

• eRecovery wait while the file is loaded in the last 36 hours

  Hello

  I have an Aspire 5735-4774 I do a default erecovery because Windows Vista does not start after switching on. I did using the Alt F10 procedure and do not have the recovery disk. It has been in the Please wait while the file load in the last 36 hours. Is this normal? Thanks for your replies

  Windows Vista has been not loading so had to do a factory reset erecovery twice. I had to keep on hitting Alt F10
  So many times to work since I don't have any drive recovery.

• Cisco ASA - ASDM will not launch (Please wait while the certificate information to be retrieved)

  I have a problem with a Cisco ASA 5505. ASA 9.0 (3) / ASDM 7.4 (1).

  I did a factory reset, format flash, all copied from tftp.

  Config copied from another SAA. Subsequently changed the host name entries.

  connect host name

  Crypto ca trustpoint ASDM_TrustPoint0
  name of the object CN =connect
  Crypto ca trustpoint ASDM_TrustPoint1
  name of the object CN =connect

  ASA works very well and the home tabs & follow-up in the works of the ASDM, but I'm not able to work on the configuration using ASDM :(

  When I go to the Configuration tab, I get this message (which remains forever):

  Please wait while the certificate information to be retrieved

  I tried a 'webvpn all come back' and backup/reloading. Did not help.

  Error message and flash content - see photo attached.

  Suggestions are greatly appreciated.

  ARO

  Nils

  HI Nils,

  Please use the asdm 7.4.2 who has a lot of bugs.

  Thank you

  VR

• Please wait while the document is being prepared for reading

  I just upgraded to Acrobat Pro DC. I now get the following on some of my documents error message: "Please wait while the document is being prepared for reading". For a large document, it takes a desperately long time to read all the pages. And the message appears whenever I open it.

  I tried to get help from a support technique cat last night. I was told that I could go back to the latest version of Acrobat Pro. It is a sad reflection on the company.

  I really don't like something on the DC, but I know that most of the problems will be fixed within the time with updates.

  Thanks for any help,

  Todd Daniel

  Hi Todd,

  Please try the step mentioned in the KB: https://helpx.adobe.com/acrobat/kb/message-content-preparation-progress-opening.html

  Kind regards

  Rave

• Blank screen bed "Please wait while the connection is established. It is a virus and we can remove it? Help, please!

  When we turn on the computer, we get a white screen blank with the above message in English and German. Immediately shut us down because we fear that if we stay connected, we could leave in a virus taking information. We do not know what to do now! The same message appears when starting the computer is safe mode.

  Helen, do you have an original disk installation or upgrade from Microsoft for your operating system (or others with the same OS and bit-size, you can borrow from someone), or you have a recovery disc (not a system restore disk but a recovery disk) for this operating system?  You can either boot and access Recovery Options which includes the restoration of the system (after maybe change the BIOS boot sequence - it displays very briefly, just after you start the computer and is usually F2 or F12 - to begin first of all on the CD drive, if it is not already defined in this way).  In my view, that is in front of the white screen because it do not use the operating system on the boot hard disk.

  If you do not have a floppy disk, depending on your operating system, it would be possible to create one on another computer.  What is your operating system (for example, Vista Business SP2 - 32-bit and Yes, detailing a lot)?

  I hope this helps.

  Good luck!

  Kosh

• How can you get rid of "Please wait while the document is being prepared for reading" at the opening of a file on a mac?

  I read about the deletion of the file of the accessibility to the use of a pc.  Where are these files on a mac?

  And is there a better solution that can be reached in the preferences?

  Thank you

  Hi samc77346904,

  You can navigate to Edit > Preferences > select 'Read' in the categories and under "options" screen reader label select the drop down option "pages vs" menu and select "only read the currently visible pages" menu drop-down.

  Let us know if this solves your problem.

  Concerning

  Sarojini

• Display image of waiting during the updating of the international registration

  Hello
  
  I have an interactive report where the user can add dynamic filters run by selection lists.
  
  I have a custom image of waiting that appears in the middle of the screen when I apply these filters to IR.
  
  I want to show this picture to custom also wait while the user is working directly with the search bar of the IR.
  Loading the default IR image appears only at the end of my query. For example, if the report takes 5 seconds to be refreshed, I see the image only for 1 second at the end.
  
  I tried all of dynamic measurements to display my display custom without success...
  
  No idea how I can do?
  
  Thanks in advance,
  
  Uji

  Hello

  There is a known issue with display inconsistent loading GIF in SEIR and websheets in APEX 4.0, as shown here:

  http://www.Oracle.com/technology/products/database/application_express/HTML/4.0_known_issues.html

  (See bug 9893744 in "relative to the other 4.0 bugs").

  This was the cause for the delay in processing GIF, then may be related to how you feel by default.

  Kind regards
  Anthony.

• JavaScript/AJAX - Show image while the update is done and then hide it.

  I want to do an update with AJAX, but I want an image 'pending' to be displayed before the update and then hide later. In this way, if there is a delay in the update or a line lock, the screen freezes not just, it displays an icon of 'Please wait '.
  I use code like the following to record in the database when a field is not checked (does it facilitate the trial):
  

  <script type="text/javascript">
  function deselect_field(f) {
    f.disabled=true;
    f.className=f.className + " saving";
    
    var v=new htmldb_Get(null,&APP_ID.,'APPLICATION_PROCESS=SC_TEST',0);
    v.add(f.name,f.value);
    v.get()
  
    f.className=f.className.replace("saving"," ");
    f.disabled=false;
  }
  </script>

  The economy class defines the background. I tested without the parameter no and it works fine. I think the problem is ajax is called too quickly, that is to say until the screen has had the chance to update.
  
  SO-, my question is, how do I get the display of images (animated gif) while the AJAX call is the treatment and then hide it in the end?
  Rather not use JQuery if possible.
  
  Thank you

  Hello

  See this example made by Carl Backstrom
  http://HTMLDB.Oracle.com/pls/OTN/f?p=11933:62:2973815688498857:no:RP:

  Kind regards
  Jari

• Switch 10 - Please wait while we install an update of the system

  Hello

  Recently, I brought a switch 10. Whenever I turn on the camera, I see the Acer Logo and he said: "Please wait while we install an update of the system.

  I must have started the device about 40 times now, but it does every time.

  Windows updates are up-to-date and are therefore all updates from Acer.

  Any ideas on how to stop this happening?

  Thank you

  Cory,

  Sorry for the previous post - I just noticed, that last Wednesday, you published an update of the BIOS (1,16).

  Guys, I'm happy to admit that this update has fixed the problem for me. Although I had hurt a bit (I had to restart Windows in order to restart the upgrade process) and after you apply the fix on the first start, that I was also able to see the spam message, at the next start-up went well.

  Thank you for the support, now my switch behaves as expected.

  See you soon!

  Hubert

• When opening Legacy Family tree, I received a message "Please wait while windows configures DAO. Then "error 1706. No valid sources were found for the DAO product.

  "Error 1706.

  When opening Legacy Family tree, I received a message "Please wait while windows configures DAO.  Then the message "the feature you are trying to use is on a network resourse which is not available. Then "error 1706. No valid sources were found for DAO product. "  I uninstalled Legacy and reinstalled, but the problem persists.

  Heritage it's a windows problem.

  try to run a file system Checker

  Start-> Run-> cmd
  In the prompt, type: SFC/scannow
  The scanner

  Reinstall the product

• Please wait while Windows configures FAX"... this process stops and I get another message that says:"the component you are trying to use is on a CD-ROM or another removable disk that is not available. "

  Original title: widows installation problem

  I have Windows XP Professional running on a desktop older.  I cleaned the disk and I would use it only as a 'internet '.  It works well and response times are pretty fast, but when I connect I get a box that says "Please wait while Windows configures FAX"... this process stops and I get another message that says "the component you are trying to use is on a CD-ROM or another removable disk that is not available", "put the 'FAX' disk and click OK. , "" Use Source: '1' "»

  The first question is I do not use a fax application and never did, I have tried every disk I can think of to complete the process, but I get the same message with each one 'the path '1' is not found. "Make sure you have access to this place and try gain or find the installation 'FAX, MSI' package in a folder from which you can install the FAX product." .. then "error 1706 - FAX." Valid any source not found for the FAX product.  Windows Installer cannot continue. »

  This will take place two or three times at the beginning upward.  How can I prevent Windows Setup tries to install something that I do not use or do not seem to have?  I deleted any fax program, that I could find on the computer, and nothing seems to work.

  Hello

  1. have you done any change in software on the computer lately?
  2. are you able to install other applications and programs successfully?

  Check to see if the problem exists in Safe Mode, if the computer works as expected in mode without failure, then we can solve the problem in the clean boot state. There is an application which is set to start when you start the computer and which launches the installer of Windows.
  a. refer to the article below for the procedure safe mode in Windows XP
  A description of the options to start in Windows XP Mode
  http://support.Microsoft.com/kb/315222

  b. you need to perform a clean boot to find the program that is causing and then disable or remove.
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353/en-us
  Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Suddenly - whenever I right click on 'New' in 'my documents' or on the desktop or in a folder, in order to create a folder or file, windows says "Please wait while that corel suite 11 is installed.

  Suddenly - whenever I right click on 'New' in 'my documents' or on the desktop or in a folder, in order to create a folder or file, windows says "Please wait while that corel suite 11 is installed. I click on cancel, but it keeps coming back. I have not Corel. If I click on cancel about 13 times it finally stops! But I can't use right click on 'new' installation at all, it seems. Also I have problems with Outlook - I wonder if I need to re - install Windows XP or is there a simpler solution?

  Thanks for yr help.

  Yes, Outlook often think files 'have not been closed properly' and takes forever to 'check' the. I give him extra time to close before stopping computer...

  Aeoliansands,

  Welcome to the Microsoft Answers community.

  You can download and run the Installer Cleanup utility:

  http://download.Microsoft.com/download/E/9/D/E9D80355-7AB4-45B8-80E8-983A48D5E1BD/msicuu2.exe

  - or try reinstalling Corel.

  Your second question is related to Microsoft Outlook and would be better suited in the Groups of Discussion Outlook. Please visit this link to find a community that will provide the support you want.

  I hope this helps!

  Lisa
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Please wait while windows configures the microsoft broadband network

  Whenever I turn my laptop on a Microsoft Broadband Networking window appears saying "Please wait while windows configures microsoft broadband networking" and then the green status bar stops about 1/3 of the way and if I try to open any programs that everything freezes.  Can anyone help!

  (Moved from other/unknown)

  Please provide more information.

  1. what version of windows is installed on your laptop?

  2. is there an error message that you receive after the failure of the MSBBN Setup?

  I suggest to update the firmware of the Device MSBBN, follow the steps in this link.

  https://support.Microsoft.com/kb/814445?WA=wsignin1.0

• Receive message "Please wait while windows configures the status" and then "the component that you are trying to use is on a CD Rom, please insert". I don't have the CD. How can I stop this?

  Windows Setup status

  Whenever I start my computer, I get a series of pop-up boxes that talk about "Please wait while windows configures the State" and then the one that says "the component that you are trying to use is on a CD Rom, please insert".  I have no idea what it is, and I have no disc to put on this line?  If I hit the buttons cancel these boxes enough times to go, but it's annoying and there is notihing badly with the operation of the computer, after I get rid of the boxes.  No idea how to stop this from happening again?  I did all the steps that have been mentioned earlier and no results.  I even did a system recovery.  I don't know what to delete.  Please help thanks

  Hello

  These messages usually mean that you have a problem with the HP printing software

  Contact HP

  http://welcome.HP.com/country/us/en/contact_us.html

  Contact HP options at the link above.

  http://h30434.www3.HP.com/

  HP's Support Forums at the link above.

• Cannot print the usatoday crossword, a message appears saying wait while data and graphics are responsible for printing, but it prints ever

  Original title: usatoday crossword print

  Using Vista and an HP C7280 printer a message saying wait while data and graphics are responsible for printing, but it prints ever.

  Hello

  You are able to print all of the other files stored on the computer?

  See the bottom of the articles that might help you resolve this problem.

  Solve printer problems
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-printer-problems
  Printer in Windows problems
  http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows