waiting for Sync failed

Similar Questions

• While trying to see Planner installation and operation, the test in local mode, the EXECUTION fails with message "Waiting for the number of virtual machines to register.

  While trying to see installation and operation Planner, the test in local mode with only 1 VM the EXECUTION fails with message "Waiting for the number of virtual machines to register.

  There may be a lot of problems in the desktop VM. Agent service see Planner is not running in VM Office. You can check in the event viewer to see what kind of error occurs. The most usual error missing file IP.txt c; drive or harness IP in the IP.txt produce if there is.

• Adobe Acrobat Reader DC - failed to access Acrobat Capture Web installation. Acrobat may be busy or waiting for input

  At Adobe Acrobat 9 Pro on Windows 7 Enterprise SP1 and used Internet Explorer 10 Version 10.0.9200.17414. In the upper RIGHT of IE, I had Adobe (plug-ins?) option to:

  Convert Web Page to PDF...

  Add Web Page in existing PDF...

  Print the Web Page...

  etc.

  I used the Web Page Add to... the daily option. I then installed, to fix a different problem, Adobe Acrobat Reader Version DC 2015.008.20082 (later from this post). Now, when I choose to add a Web Page in existing PDF... option, I get the error popup:

  Unable to access the installation of Acrobat Capture Web. Acrobat may be busy or waiting for input.

  I have searched the WWW of solutions but can't find one. Anyone has any potential ideas?

  The free software Adobe Reader doesn't have these features. They are part of Acrobat (not free) - as far as I know; only with the Pro version.

  There may be a PDF 'create' a web page associated with an Adobe online subscription services (perhaps PDF Pack).

  Be well...

• Status: Unexpected error has occurred. The timeout of waiting for an answer UVSC error internal

  Work with labview ARM and it was working fine this morning.  I went to run a program and the build failed with the following message.

  [13: 34:50] status: error
  An unexpected error has occurred.

  [Source: the timeout of waiting for an answer]

  Internal error UVSC

  Detail: [UVSC_PRJ_LOAD, MSG: 0x1000, STATUS:]
  [0x1] code: 1]

  Did normal things as restart the computer.  Plug and unplug the Board of Directors of the computer.

  I tried to reinstall the whole arm labview and it does not work.

  Even from labview so you go to tools > ARM > show keil does not work either.  I can open keil in itself, but it doesn't seem to be communicating with labview.

  Figured it out.  Somehow the projects I was working on has been corrupted somehow.  After another reinstalled, I opened a sample project, not one of the many that are mine, and it worked.  I had copy and past the code on the project and in a new, but it works.  Don't know how my projects I screwed up in the middle of work on them.

  Now, back to actually do the work.

• Start stuck on "Please wait for the Local Session Manager."

  I would say that this problem started a couple of days. Went to start my laptop (Toshiba) and he sat on the "Please wait" message forever.

  Had no problems to start in safe mode. Looked up various ways of addressing the problem.

  Was able to change the resume date and back a few weeks ago. Still no luck. Happened to read something on a printer Epson being perhaps the problem driver (it was installed a day before the date of restoration chosen). Uninstalled the drivers, computer still does not start.

  Tried restarting running. I do not have the CD it came with Vista, but it was an option when you hold F8 during startup (I think?) Couldn't find any problems.

  Ran check on memory. No problem either.

  Changed settings for a verbose startup and ran a Diagnostic startup - all good for this. Then tried selective startup load system services... This is when the error occurs. When starting, it hangs on "Please wait for the Local Session Manager" and does nothing more.

  I looked in the event viewer to see what came that time and a couple mistakes were:

  Event ID 6000: winlogon notification subscriber was unavailable to handle a notification event.

  Event ID 7026: the next (s) start or start failed to load system
  spldr
  Wanarpv6

  It would be very useful for me not having to run my computer in safe mode automatically all the time, although it is useful that I at least have that option. Any help is greatly appreciated.

  Hello

  1. by chance your computer is connected to a domain environment?

  2. as you mentioned in your article that you tried the selective startup, I want to confirm if you have disabled the services left 3rd after hide Microsoft services?

  If you did not disable these services make sure you disable and then check if it works.
  See the article below for more information.
  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
  http://support.Microsoft.com/kb/929135
  Note: When the diagnosis is complete, don't forget to reset your computer to normal startup. Follow step 7 in the above article.

  I hope this helps.

  Thank you, and in what concerns:
  Shekhar S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Turn off the power and wait for closing a connection

  Hello

  in a previous post, I ask for help with powerOff.

  I see my app to enter in this method, but I have a problem:

  I send a file to an FTP server using a class that I posted a few days ago.

  The problem is when the user stop device when the ftp stor command is not finished.

  I want to intercept and send abor command because without it, I find a file on the FTP server.

  PowerOff() I change a Boolean value to tell the ftp process I ask for demolition, when see ftp, it stop the command stor and sends an abor command

  The end of stor() method with a fake and I know the process to complete.

  The problem is how can I wait for this false in the main screen.

  I do something like

  while (isFtpSending())
      try { wait() } catch (InterruptedException e){}
  
  //isFtpSending is a synchronized method to change the value of boolean
  

  I set up a model of the observer, when the FTP class to end the process it send an update of class from the main screen and I do

  setFtpSending(false)
  notify()
  

  The problem is that when I do a wait(), it seems that off wire continues and stop the radio and all other process and stop device.

  Any idea?

  I think that what I need is a method to force the device to wait my thread.

  I hope someone understands something, sorry for the bad English.

  Thank you!

  p.d. I change the class FTP, because all the stor method has been synchronized, so I can't change the Boolean askForAbort until there finishes. Now sending bytes code is out of sync.

  Hello

  I find a work around the use of powerOffRequestd (int reason) of SystemListener2

  My end of thread before beginning the shutdown process.

  I see that the problem is that some link narrow wire of bb without asking or wait...

  I mark it as resolved

• Please wait for the customer to political group - stop questions

  Hello

  I have problems with the closing of a machine. When the machine is connected to the corporate network, everything works fine. However, if the computer is connected to the VPN (1 hour or more) it is always suspended when it stops. First step in the shutdown process is:

  Please wait for the system event Notification service.

  This change after 3 minutes exactly. Next step:

  Please wait for Group Policy client windows 7

  is never exceeded (even after a few hours). Machine never off.

  Under newspapers there are always these 4 events when the machine stops in vain:

  1. 6005: the winlogon notification subscriber takes a long time to handle the notification event (Logoff).
  2. 4627: the event COM + a system expired attempt to fire the method of logging on the event {D5978650-5B9F-11D1-8DD2-00AA004ABD5E} class for the Publisher and the Subscriber.  The Subscriber has not responded within 180 seconds. The full name of the subscription is "ISensLogon2". The HRESULT is 80010002
  3. 6006: the winlogon notification subscriber took 180 second (s) to handle the notification event (Logoff).
  4. 6005: the winlogon notification subscriber takes a long time to handle the notification event (Logoff).

  Sense has expired after 3 minutes while there is no event 6006 for GPClient and machine is stuck there for centuries (Please wait for the customer to group policy). I noticed in the system logs that before the machine hangs during the shutdown process there are these errors and warnings:

  • 5783: the session configuration for the Windows NT or Windows 2000 Domain Controller \\server for the domain X is not admissible.  The current CPP of Netlogon call on \\machine to \\server was canceled.
  • 1014: name resolution for the name of the server has expired after none of the configured DNS servers answered.
  • 131: NtpClient could not set a domain peer to use as a source of time due to the DNS resolution error on ". NtpClient will try again in 3473457 minutes and double the reattempt interval thereafter. The error was: the requested name is valid, but no data of the requested type was found. (0x80072AFC).

  There is more than 1014 events for different servers and some 131. 5783 is always alone.

  I did a group policy log, because I thought that I will be able to see where the machine stuck. Below you can see the part of the newspaper GPSVC when the machine stops in vain:

  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0xe58
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: cancellation pending appeals
  GPSVC (2d4.1cfc) 21:31:24:327 Client_CompleteNotificationCall: failed with 0x71a
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: cancelled waiting for calls
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0
  GPSVC (438.1a04) 21:31:24:327 waiting for user group wire political end.
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0xe10
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: cancellation pending appeals
  GPSVC (218.C88) 21:31:24:327 Client_CompleteNotificationCall: failed with 0 x 525
  GPSVC (2d4.1cfc) 21:31:24:327 Client_CompleteNotificationCall: failed with 0x71a
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: cancelled waiting for calls
  GPSVC (2d4.9C8) 21:31:24:327 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0xdcc
  GPSVC (218.1054) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0x20cc
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (2d4.9C8) 21:31:24:327 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::UnregisterNotification: incoming with the event 0xd90
  GPSVC (218.1054) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (2d4.1cfc) 21:31:24:327 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (2d4.1cfc) 21:31:24:342 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0
  GPSVC (218.D48) 21:31:24:342 Client_CompleteNotificationCall: failed with 0 x 525
  GPSVC (218.D48) 21:31:24:342 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
  GPSVC (218.1c04) 21:31:24:327 Client_CompleteNotificationCall: failed with 0 x 525
  GPSVC (218.1c04) 21:31:24:342 CGPNotify::OnNotificationTriggered: Completenotification failed with 1317
  GPSVC (218.1054) 21:31:24:342 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0
  GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: entering with the event 0 x 2100
  GPSVC (218.1054) 21:31:24:342 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0
  GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: entering with the event 0 x 1264
  GPSVC (218.1054) 21:31:24:342 CGPNotify::AbortAsyncRegistration: No asynchronous recording is in progress
  GPSVC (218.1054) 21:31:24:342 CGPNotify::UnregisterNotification: dating dwStatus = 0 x 0

  I excluded 1 GP machine and left on the VPN for a few hours, several times. He always stopped correctly.

  However I tried with the VPN disconnection before turning off the machine, I even turned off WiFi but machine still hanging. If I tried to get GP results it takes ages before stopping the machine and he's stuck in the step "to get the user name. Gpupdate/force will never update policy (it stops at policy update...). I tired with the installation of different patches that has not solved the problem.

  I think that there is that DNS issues while the machine is on VPN which led the GP cannot be applied. When the machine tries to close it is always somehow connected. There is no problem with the connection, no GP application script when the user disconnects, not roaming profiles.

  Does anyone have the same problems? All machines are Dell with Juniper NC (VPN).

  Thank you

  Hello

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the TechNet Forums.

  TechNet forum: For Windows 7 

  Hope this information helps.

• Bluetooth: Application does not wait for investigation

  Good afternoon

  For almost a week already had a problem, which already has a load of messages on the forum, after research and do the trial & error for three days, I hope someone can relate to no doubt tiny stupid error I have and I just can't.

  The goal is simple: Once loaded, begins to discover Bluetooth lights nearby.

  Problem: The tags are located and what is work decently, but he does not obey the synchronization (wait/notify).

  I tried several things, but I keep hitting the same problem. It does not take into account my lock and did the survey on the bottom, and only after main thread finished drawing.

  To facilitate the access to tests, I've isolated the problem section.

  // Does Not wait for Inquiry to end!
  

  The solutions tried so far:

  -Temporary "fix" sleep vs sync

  S ' object in static final or none and that any combination of the three options.

  -Develop a 9700 OS 6 SDK: 6.0.0.30 Plugin Java: 1.3.0

  import java.util.Vector;
  
  import javax.bluetooth.BluetoothStateException;
  import javax.bluetooth.DiscoveryAgent;
  import javax.bluetooth.LocalDevice;
  
  import net.rim.device.api.ui.component.AutoTextEditField;
  import net.rim.device.api.ui.component.Dialog;
  import net.rim.device.api.ui.container.MainScreen;
  
  public class MyScreen extends MainScreen
  {
      Vector tags = new Vector();
      private Object lock=new Object();
  
      public MyScreen() throws BluetoothStateException
      {
          super();
          setTitle("Bluetooth Discover");
          Listener myDiscoveryListener = new Listener();
          try
          {
             LocalDevice localDevice = LocalDevice.getLocalDevice();
  
             DiscoveryAgent discoveryAgent = localDevice.getDiscoveryAgent();
  
             discoveryAgent.startInquiry(DiscoveryAgent.GIAC, myDiscoveryListener);
          }
          catch(BluetoothStateException bse)
          {
              Dialog.alert("BluetoothStateException exception: "+bse.toString());
          }
          // Does Not wait for Inquiry to end!
          try
          {
              synchronized(lock)
              {
                  lock.wait();
              }
          } catch (Exception e) {}
          Vector tags = myDiscoveryListener.mac;
          String text="";
          for (int i=0; i
  
  import java.util.Vector;
  
  import javax.bluetooth.DeviceClass;
  import javax.bluetooth.DiscoveryListener;
  import javax.bluetooth.RemoteDevice;
  import javax.bluetooth.ServiceRecord;
  
  public class Listener extends Thread implements DiscoveryListener
  {
      Vector mac = new Vector();
      private Object lock=new Object();
  
      public Listener()
      {
      }
  
      public void deviceDiscovered(RemoteDevice remoteDevice, DeviceClass cod)
      {
          try
          {
              System.out.println("Device: " + remoteDevice.getBluetoothAddress());
          } catch(Exception e){ } finally{ mac.addElement(remoteDevice.getBluetoothAddress().toString()); }
      }
  
      public void inquiryCompleted(int discType)
      {
          if (mac.size() > 0)
          {
              try
              {
                  lock.notifyAll();
              } catch (Exception e){}
          }
      }
  
      public void servicesDiscovered(int transID, ServiceRecord[] servRecord)
      {
      }
  
      public void serviceSearchCompleted(int transID, int respCode)
      {
      }
  }
  
  Thanks in advance for all the help possible and yes I am services that support are not being implemented are not necessary for the current problem that prevents me to further develop my application.
  PF
  			 
  I have the same problem before and still can't fix. I don't know, but it seems that there is a problem in the 9700 OS.
  http://supportforums.BlackBerry.com/T5/Java-development/BB-Bluetooth-connection-cannot-act-as-client...
  In any case please inform me if there is good new ants on this issue.
  Thanks in advance.
  Best regards
  Albert Siu
  		   

• Waiting for redo log file missing when restore main database using RMAN backup that was taken on the database physical standby

  Here's my question after tons of research and test without have the right solutions.

  Target:

  (1) I have a 12.1.0.2 database unique main enterprise 'testdb' as database instance running on the server "node1".

  (2) I created physical standby database "stbydb" on the server "node2".

  (3) DataGuard running on the mode of MaxAvailability (SYNC) with roll forward in real time 12 default c apply.

  (4) primary database has 3 groups of one-man redo. (/oraredo/testdb/redo01.log redo02.log redo03.log)

  (5) I've created 4 standby redo logfiles (/oraredo/testdb/stby01.log stby02.log stby03.log stby04.log)

  (6) I do RMAN backup (database and archivelog) on the site of relief only.

  (7) I want to use this backup for full restore of the database on the primary database.

  He is a DR test to simulate the scenario that has lost every primary & Eve total servers.

  Here is how to save, on the database pending:

  (1) performance 'alter database recover managed standby database Cancel' to ensure that compatible data files

  (2) RMAN > backup database;

  (3) RMAN > backup archivelog all;

  I got elements of backup and copied to primary db Server something like:

  /Home/Oracle/backupset/o1_mf_nnndf_TAG20151002T133329_c0xq099p_.BKP (data files)

  /Home/Oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.BKP (spfile & controlfile)

  /Home/Oracle/backupset/o1_mf_annnn_TAG20151002T133357_c0xq15xf_.BKP (archivelogs)

  So here's how to restore, on the main site:

  I clean all the files (data files, controlfiles oder all gone).

  (1) restore spfile from pfile

  RMAN > startup nomount

  RMAN > restore spfile from pfile ' / home/oracle/pfile.txt' to ' / home/oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.bkp';

  (2) modify pfile to convert to db primary content. pFile shows below

  *.audit_file_dest='/opt/Oracle/DB/admin/testdb/adump '

  * .audit_trail = "db".

  * full = '12.1.0.2.0'

  *.control_files='/oradata/testdb/control01.ctl','/orafra/testdb/control02.ctl'

  * .db_block_size = 8192

  * .db_domain = "

  *.db_file_name_convert='/testdb/','/testdb /'

  * .db_name = "testdb".

  * .db_recovery_file_dest ='/ orafra'

  * .db_recovery_file_dest_size = 10737418240

  * .db_unique_name = "testdb".

  *.diagnostic_dest='/opt/Oracle/DB '

  * .fal_server = "stbydb".

  * .log_archive_config = 'dg_config = (testdb, stbydb)'

  * .log_archive_dest_2 = "service = stbydb SYNC valid_for = (ONLINE_LOGFILE, PRIMARY_ROLE) db_unique_name = stbydb'"

  * .log_archive_dest_state_2 = 'ENABLE '.

  *.log_file_name_convert='/testdb/','/testdb /'

  * .memory_target = 1800 m

  * .open_cursors = 300

  * runoff = 300

  * .remote_login_passwordfile = "EXCLUSIVE."

  * .standby_file_management = "AUTO".

  * .undo_tablespace = "UNDOTBS1.

  (3) restart db with updated file pfile

  SQLPLUS > create spfile from pfile='/home/oracle/pfile.txt'

  SQLPLUS > the judgment

  SQLPLUS > startup nomount

  (4) restore controlfile

  RMAN > restore primary controlfile to ' / home/oracle/backupset/o1_mf_ncsnf_TAG20151002T133329_c0xq0sgz_.bkp';

  RMAN > change the editing of the database

  (5) all elements of backup catalog

  RMAN > catalog starts by ' / home/oracle/backupset / '.

  (6) restore and recover the database

  RMAN > restore database;

  RMAN > recover database until the SNA XXXXXX; (this YVERT is the maximum in archivelog backups that extends beyond the scn of the backup of the data file)

  (7) open resetlogs

  RMAN > alter database open resetlogs;

  Everything seems perfect, except one of the file log roll forward pending is not generated

  SQL > select * from v$ standby_log;

  ERROR:

  ORA-00308: cannot open archived log ' / oraredo/testdb/stby01.log'

  ORA-27037: unable to get file status

  Linux-x86_64 error: 2: no such file or directory

  Additional information: 3

  no selected line

  I intended to use the same backup to restore primary basic & helps record traffic and the downtime between them in the world of real output.

  So I have exactly the same steps (except STANDBY restore CONTROLFILE and not recover after database restore) to restore the database pending.

  And I got the same missing log file.

  The problem is:

  (1) complete alert.log filled with this error, not the concern here

  (2) now repeat it in real time apply won't work since the Party shall LGWR shows always "WAITING_FOR_LOG."

  (3) I can't delete and re-create this log file

  Then I tried several and found:

  The missing standby logfile was still 'ACTIVE' at present RMAN backup was made.

  For example, on db standby, under Group #4 (stby01.log) would be lost after the restoration.

  SQL > select GROUP #, SEQUENCE #, USE (s), the STATUS from v$ standby_log;

  GROUP # SEQUENCE # USED STATUS

  ---------- ---------- ---------- ----------

  4 19 ACTIVE 133632

  5 0 0 UNASSIGNED

  6 0 0 not ASSIGNED

  7 0 0 UNASSIGNED

  So until I take the backup, I tried on the primary database:

  SQL > alter system set log_archive_dest_state_2 = delay;

  This was the Group of standby_log side Eve #4 was released:

  SQL > select GROUP #, SEQUENCE #, USE (s), the STATUS from v$ standby_log;

  GROUP # SEQUENCE # USED STATUS

  ---------- ---------- ---------- ----------

  4 0 0 UNASSIGNED

  5 0 0 UNASSIGNED

  6 0 0 not ASSIGNED

  7 0 0 UNASSIGNED

  Then, the backup has been restored correctly without missing standby logfile.

  However, to change this primary database means break DataGuard protection when you perform the backup. It's not accept on the production environment.

  Finally, my real questions come:

  (1) what I do may not do on parameter change?

  (2) I know I can re-create the control file to redo before delete and then recreate after. Is there any simple/fast to avoid the standby logfile lost or recreate the lost one?

  I understand that there are a number of ways to circumvent this. Something to keep a copy of the log file waiting restoration progress and copy up one missing, etc, etc...

  And yes I always have done no real-time applies "to the aid of archived logfile" but is also not accept mode of protection of production.

  I just want proof that the design (which is displayed in a few oracle doc Doc ID 602299.1 is one of those) that backs up data backup works effectively and can be used to restore the two site. And it may be without spending more time to resume backups or put the load on the primary database to create the database before.

  Your idea is very much appreciated.

  Thank you!

  Hello

  1--> when I take via RMAN backup, RMAN does not redo log (ORL or SRL) file, so we cannot expect ORLs or SRL would be restored.

  2nd--> when we opened the ORL database should be deleted and created

  3rd--> Expecting, SRL should not be an issue.we should be able to do away with the fall.

  DR sys@cdb01 SQL > select THREAD #, SEQUENCE #, GROUP #, STATUS from v$ standby_log;

  THREAD # SEQUENCE # GROUP # STATUS

  ---------- ---------- ---------- ----------

  1 233 4 ACTIVE

  1 238 5 ACTIVE

  DR sys@cdb01 SQL > select * from v$ logfile;

  GROUP # STATUS TYPE MEMBER IS_ CON_ID

  ---------- ------- ------- ------------------------------ --- ----------

  3 /u03/cdb01/cdb01/redo03.log no. 0 online

  /U03/cdb01/cdb01/redo02.log no. 0 2 online

  1 /u03/cdb01/cdb01/redo01.log no. 0 online

  4 /u03/cdb01/cdb01/stdredo01.log WATCH No. 0

  /U03/cdb01/cdb01/stdredo02.log EVE 5 No. 0

  DR sys@cdb01 SQL > ! ls - ltr /u03/cdb01/cdb01/stdredo01.log

  method: cannot access the /u03/cdb01/cdb01/stdredo01.log: no such file or directory

  DR sys@cdb01 SQL >! ls - ltr /u03/cdb01/cdb01/stdredo02.log

  -rw - r-. 1 oracle oinstall 52429312 17 Oct 15:32 /u03/cdb01/cdb01/stdredo02.log

  DR sys@cdb01 SQL > alter database force claire logfile 4;

  change the database group claire logfile 4

  *

  ERROR on line 1:

  ORA-01156: recovery or current flashback may need access to files

  DR sys@cdb01 SQL > alter database recover managed standby database cancel;

  Database altered.

  DR sys@cdb01 SQL > change the database group claire logfile 4;

  Database altered.

  DR sys@cdb01 SQL > ! ls - ltr /u03/cdb01/cdb01/stdredo01.log

  -rw - r-. 1 oracle oinstall 52429312 17 Oct 15:33 /u03/cdb01/cdb01/stdredo01.log

  DR sys@cdb01 SQL >

  If you do, you can recreate the controlfile without waiting for redo log entry...

  If you still think it's something is not acceptable, you must have SR with support to analyze why he does not abandon SRL when controlfile_type is "underway".

  Thank you

• Mobile Lightroom. Stuck with "Waiting for Connection".

  Mobile of Lightroom cannot synchronize because "waiting for connection" status. Was working fine before. Also cannot synchronize with LR Mobile in the Collections switches - they used to work very well.  What's Adobe up? Need a fix.

  Problem fixed (maybe).  I disconnected LR-Mobile on iPad, then logged on. Initially, it looked like LR - M in lost iPad. Then I closed the application and reopened. All the images previously synchronized and collections are back. Then I opened LR on my iMac and to my surprise, the "waiting for connection" had disappeared. It was replaced by "sync 22 photos. Of course, all seems good now. Don't know if this will work for everyone, but fingers crossed it stays fixed.

• waiting for redo log deleted

  Oracle 11 g 2 (11.2.0.3) Linux x86_64

  A silly mistake was made. While recreate redo standby logfiles, I managed to remove (rm command) waiting for redo log file in progress (before the end of the application) of the BONE. Now I see in the log of alerts:

  ORA-00313: open failed for members of log group 7 of thread 1
  ORA-00312: online log 7 thread 1: ..../standby_redo7.log'
  ORA-27037: unable to obtain file status
  Linux-x86_64 Error: 2: No such file or directory
  Additional information: 3
  

  What are my options at this point? I have to any cancelled transaction? The settlement seems to be moving right on the property. Where am I people?

  Thanks to you all.

  Hello

  1 ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CANCEL;

  2. ALTER LOGFILE GROUP 7 CLEAR DATABASE;

  3 ALTER DATABASE DROP STANDBY LOGFILE GROUP 7;

  4. ALTER DATABASE ADD STANDBY LOGFILE GROUP 7;  OR ALTER DATABASE ADD LOGFILE MEMBER '' HELPS GROUP 7;

  5. START AGAIN APPLY: ALTER DATABASE RECOVER MANAGED STANDBY DATABASE CURRENT LOGFILE USING DISCONNECT FROM THE SESSION;

  HTH

  Tobi

• What is the cause of the message "Waiting for Service ' Console CVD activity

  I have two related questions.

  basis, I just started centralizing 200 computers ish, all except 2 appears fine, 2 questions, one below and another with VSS errors.  This message is just for the question "in waiting for the Service.

  1. What is the cause of the message "Waiting for Service ' Console CVD activity and is there anywhere that documents these meanings of status.
  2. No idea where I should start troubleshooting the message "Waiting for Service ' I get to the computer below.

  I have a computer with this status which comes to have installed the client and will not be to centralize.  Other computers seem to work properly (centralized).

  The computer is to ping requests, but appears as disconnected in the console.

  I deleted the CVD and restarted the centralization CVD using a different policy on a different volume without change.

  Journal of the history of CVD below

  Description of the Type of weather

  31/01/2014-08:52:32 AUDIT_EVENT assign device, device: PC30866 (1995), cardiovascular disease: 11614, political CVD: don't Default - every 4hrs - no drive D (1.1)

  02/05/2014-13:53:58 politics AUDIT_EVENT assign CVD, CVD: PC30866 (11614), CVD policy: Migration Post-quotidien (1.0)

  31/01/2014 General Office EVENT 20:44:46 service error

  31/01/2014 General Office service EVENT 17:39:04 error

  31/01/2014 14:44:34 EVENT has not finished downloading, internal error, exception attached

  31/01/2014 General error from the EVENT 13:05:15 service office

  31/01/2014-12:30:37 TRANSACTION_START PC30866 - centralize endpoint

  the transaction log has an inscription mentioning a failure (not sure if it is the server or PC related) disc.

  Diseases cardiovascular diseases cardiovascular name Type State layer size (MB) data transferred (MB) branch reflector savings start time end time transfer (MB)

  Of the endpoint PC30866 centralize 11614 reading disc failed 169648 1531 0 31/01/2014 12:30:37 05 d 04:16:52

  The next event is in the application event log and the Mirage event log for the failed computer. (there were not all other errors in the paper since the deployment of mirage customer and there is no errors in the system event log)

  Event type: error
  Event source: VMware Horizon Mirage customer
  Event category: no
  Event ID: 0
  Date: 31/01/2014
  Time: 20:44:46
  User: n/a
  Computer: PC30866
  Description:
  Error general service office
  Unexpected exception taken (sender Name:Wanova.Desktop.Service.exe
  There is no policy context.
  , the object exception System.OutOfMemoryException: Exception of type 'System.OutOfMemoryException' was thrown.
  System.Collections.Generic.List to ' 1.set_Capacity (Int32 value)
  System.Collections.Generic.List to ' 1.EnsureCapacity (Int32 min)
  to System.Collections.Generic.List' 1. Add (T item)
  at Wanova.Net.DataTransfer.TransferStreams.SignatureResponseStream.ProcessChunk (ChunkInfo chunkInfo)
  at Wanova.Net.DataTransfer.TransferStreams.ChunkInfoDecodingStream.BeginWrite (Byte [] buffer, TransferStreamWriteCallback onWriteComplete)
  at Wanova.Net.DataTransfer.DataHandler.ExecuteDataStreamTask (DataHandlerExecutionTask task, MarkCompletionCallback markCompletionCallback)
  at Wanova.Net.DataTransfer.DataHandler.ExecuteTask (IExecutionTask task, MarkCompletionCallback markCompletionCallback)
  Wanova.Net.DataTransfer.ExecutionController.QueueListener (Group IExecutionTask)
  to Wanova.Common.ThreadUtils.ParamaterizedWorkItem'1.Run (object fakeParam)
  at System.Threading.QueueUserWorkItemCallback.WaitCallback_Context (Object state)
  at System.Threading.ExecutionContext.Run (ExecutionContext executionContext, ContextCallback callback, Object state, Boolean ignoreSyncCtx)
  at System.Threading.QueueUserWorkItemCallback.System.Threading.IThreadPoolWorkItem.ExecuteWorkItem)
  at System.Threading.ThreadPoolWorkQueue.Dispatch)
  at System.Threading._ThreadPoolWaitCallback.PerformWaitCallback (), ends at True)

  For more information, see Help and Support Center at http://go.microsoft.com/fwlink/events.asp.

  It turns out that this computer seems to have hard drive errors, so not a matter of mirage.

• Time-out error waiting for VMware Tools start in the prompt

  Hello people,

  I used PowerCLI 5.5 Release 1 connection to my 5.1.036098 vcenter (ESXi host 5.1.0 1065491 management).

  I'm connected (non secure warning) and be able to start the virtual machines.

  I try to run a task on the network of a VM VMware documentation example below interface.

  The first two commands work fine, but finally it fails with the error below.

  I upgraded VMware tools and hardware to the latest version.

  $vm1 = get-VM-name VM1

  $guest = get-VMGuest $vm1

  $interface = get-VMGuestNetworkInterface - VMGuest $guest - GuestUser password1 administrator - GuestPassword - ToolsWaitSecs 100

  Timeout error while you wait for VMware tools start in the comments.

  
  

  Someone at - it suggestions?

  Thank you

  romatlo

  The 3rd line to access the guest OS via VMware tools that must be installed in the virtual machine.

  There are a number of other prerequisites to be able to make that kind of call.

  See my work Will Invoke-VMScript? post.

• Script to wait for Clone task is completed

  Good day, as part of the post, I run a command that enables the NIC and sets the right Port-Group of cloning process. I put a sleep command in each environment is diferrent, so I find myself always change this duration of sleep because the cloning process does not end in the time of sleep and the rest of the script fails. So in order to get rid of the sleep control that I want to capture the CloneVM_Task and pass this parameter to wait-task that will force the completion of the ClonVM_Task. I could just make sure no other tasks are running but this task, but as we all know that alays can't be the case. So that's what I did.

  I begin a deployment of FVO to have an another long running task. Then I run the script.

  If ((Get - PSSnapin - name Vmware.VimAutomation.Core - ErrorAction SilentlyContinue) - eq $null) {Add-PSSnapin "Vmware.VimAutomation.Core"}

  # Virtual Center details
  $server_address = "MYvCenter name" or IP

  SE connect-VIServer-Server $server_Address - user username-pass password - WarningAction SilentlyContinue

  
  #Create Master VM Templates
  #
  # Here we import the CSV file with the account information and he piped in a Foreach-object
  # Creating a Variable that imports the csv file that contains all data of the virtual machine

  CD "e:\Scripts.
  $InputFile = import-Csv "E:\scripts\mycloneinput.csv".
  $InputFile | {ForEach-Object

  $ip = $_. VM_IPAddress
  $GName = $_. VM_Guestname
  $TName = $_. Template_name
  $HName = get-VMHost "myhostname" # 1 first Select
  $Desc = $_. Description
  $Dstore = $_. Datastore_Name
  $Spec = $_. Customization
  $Folder = $_. Folder
  $Sfolder = $_. Subfolder
  $NIC = $_. NIC
  $NIC_Lable = $_. NIC_Label
  $Gateway = $_. NIC_Gateway
  $SubnetMask = "255.255.255.0".
  $DNS1 = $_. DNS1
  $DNS2 = $_. DNS2
  
  Write-host "creation: ' $GName
  Write-host "template name is: ' $TName

  # This takes variables and creates the virtual machine
  Get-OSCustomizationSpec $Spec | Get-OSCustomizationNicMapping | »
  Game-OSCustomizationNicMapping - IpMode UseStaticIP - $ip - $SubnetMask subnet mask - DNS IpAddress $DNS1, $DNS2 - DefaultGateway $Gateway
  New-VM-name $GName - location $Folder - model $TName - host $HName - $Dstore - $Desc Description data store - OSCustomizationSpec $Spec - RunAsync-confirm: $false
  
  #######################################
  #Waiting for cloning process to finish.
  #######################################

  $$$ Under notes show a little history of how I got to this point.

  $$ Note1: the first attempt, I just captured running tasks and their past to the task pending. "Well, since the deploy OVF and ClonVM_Task where it runs would wait up to two when completed by the end."

  $$ Note2: so I added the If Else loop below that failed, because $RTask never equaled only CloneVM_Task, but was a table of two.

  $$ Note3: I tried to us below to separate the two tasks to help

  # $RTask = get-task-status running (who captured the two tasks running)

  # $Array = $Rtask.Split("") (Errored with the method call failed because [System.Object []] contains a method named 'Split'.)
  # So I tried to divide the table like this. ForEach ($Task in $Rtask.Name - Split("")) {Write-Host "my tasks are:" $Task}

  
  Get-task-status Running | Export-CSV "E:\scripts\Current_Tasks.csv".
  $InputFile2 = import-CSV "E:\scripts\mmca\mmca_Current_Tasks.csv".
  $InputFile2 | {ForEach-Object
  $RTask = $_. Name
  Write-Host "current task is: ' $RTask
  IF ($RTask - eq "CloneVM_Task") {}
  Write-Host "current task of Clonning is: ' $RTask
  Write-Host "in the meantime the cloning process finish.
  Waiting-task-task $MyTask
  }
  Else {}
  Write-Host "no cloning process is executed.
  }
  }
  
  # This allows the NIC and set the correct Port Group
  Get-VM-name $GName | Get-NetworkAdapter-name $NIC | Together-NetworkAdapter - NetworkName $NIC_Lable-confirm: $false - StartConnected $true
  
  }

  When I run the present, I get the following:

  # #This shows the task start Clonning #.

  erverId: /[email protected]:443 /
  Status: running
  IsCancelable: true
  PercentComplete: 5
  StartTime: 03/05/2013 00:52:13
  FinishTime:
  ObjectId: VirtualMachine-vm-382
  Result:
  Description: Clone virtual machine
  ExtensionData: VMware.Vim.Task
  ID: Work-task-2070
  Name: CloneVM_Task
  UID: /[email protected]:443 / task = work-work-2070 /

  #########################################################

  # #Runs through the tasks running.

  Current task: deploy the model to the FVO
  No cloning process is executed

  # Ignore deploy it task #.

  # #Matches the If statement and continues to process #.
  Current task is: CloneVM_Task
  Task current Clonning is: CloneVM_Task
  Wait for the cloning process to complete

  # #Error #.

  Waiting-Task: cannot bind parameter 'task '. Impossible to convert the value of 'CloneVM_Task' to type 'System.String' type 'VMware.VimAutomation.Sdk.Types.V1.Task '.
  E:\scripts\Working_Create_Master_Templates.ps1:71 tank: 24
  + Wait-task-task < < < < $RTask
  + CategoryInfo: InvalidArgument: (:)) [waiting-Task], ParameterBindingException)
  + FullyQualifiedErrorId: CannotConvertArgumentNoMessage, VMware.VimAutomation.ViCore.Cmdlets.Commands.WaitTask

  $$$ Under notes show a little history of how I got to this point.

  Note1: The first attempt, I have just captured tasks currently running and pending their past to the task. "Well, since the deploy OVF and ClonVM_Task where it runs would wait up to two when completed by the end."

  NOTE2: So I added the If Else loop below which failed because $RTask never equaled only CloneVM_Task, but was a picture of two tasks.

  Note3: I tried to use the following to divide the two tasks:

  $RTask = get-task-status running (who captured the two tasks running)

  foreach ($Task in $Rtask - Split(""))
  {
  {Write-Host "my tasks are:" $Task}
  IF ($Task - eq "CloneVM_Task") {}
  Write-Host "current task of Clonning is: ' $Task
  Write-Host "in the meantime the cloning process finish.
  Waiting-task-task $Task
  }
  Else {}
  Write-Host "no cloning process is executed.
  }

  
  }

  # #Output the little script above #.

  Current task: deploy OVF model CloneVM_Task
  My tasks are: deploy
  My tasks are: OVF
  My tasks are: model
  My tasks are: CloneVM_Task
  Task current Clonning is: CloneVM_Task
  Wait for the cloning process to complete
  Waiting-Task: cannot bind parameter 'task '. Impossible to convert the value of 'CloneVM_Task' to type 'System.String' type 'VMware.VimAutomation.Sdk.Types.V1.Task '.
  Online: 11 char: 24
  + Wait-task-task < < < < $Task
  + CategoryInfo: InvalidArgument: (:)) [waiting-Task], ParameterBindingException)
  + FullyQualifiedErrorId: CannotConvertArgumentNoMessage, VMware.VimAutomation.ViCore.Cmdlets.Commands.WaitTask

  I'm new to Powercli and I've scoured Google for a possible answer. I thought I might have a solution that has been published on the VMware PowerCLI Forum, but I couldn't get this to work. Any help would be greatly appreciated.

  #########################################

  I wasn't worried about how to tasks where splits, unless I was trying to follow the import fo the OVF, so that the script went into the loop If and as one of the names for CloneVM_Task then he Treaty. But I got the same error I did in the last version of the above script. That's why I have the version curent thinking that if I exported and then imported the tasks it might make a difference.

  I'm new to Powercli and would like a little help. I am either very close or by a mile off. :-)

  Thank you

  Mitch

  Why don't you store the the task object that is returned when you use the RunAsync switch?

  You can create a loop around the State and wait until the clone job is done.

  $task = New-VM -Name MyVM ... -RunAsync 
  
  while($task.ExtensionData.Info.State -eq "running"){
    sleep 1  $task.ExtensionData.UpdateViewData('Info.State')
  }
  

  The big difference with the Wait-job cmdlet, it is that this will allow you to perform additional work in the While loop.

  Waiting-task the cmdlet waits just until the task is finisned and you can not do anything else.

• FixIt DB for sync problems

  I bought the DB Fixit 'code' Thursday but did not receive the code to use yet.  When I do the "advanced use" I find 736 errors are in "SNLT calendar DB-SNLT".

  What's inside?  How can I find it and delte - or I need to wait for the DBFix this code?

  I hope that this will solve my problem of sync!

  OMG!  I think it's FINALLY fixed.  I synchronized with two computers, then adding information on both sides and synced again and everything is moving!  The only thing I lost was called MegaHolidays, a program which automatically public holidays on the calendar.  Can you recommend a different free program that perhaps does the same thing?  I'm a bit wary of download MegaHolidays once again, just in case something is wrong here and that caused all my troubles.