WampServer: Your port 80 is actually used by Microsoft-HTTPAPI/2.0

Similar Questions

• Cannot open COM1. Please check your port settings, XP SP3

  Hello
  I have some XP SP3 workstations that are used in the factory.  The shell of charge is attached to COM1.  When I test the appliance to make sure that all devices work, the shell load test will not open COM1.  When I use HyperTerminal to test COM1, I get the message "cannot open COM1. Please check your port settings. "I checked the BIOS of a workstation and compare it to the non-working station.  Corresponding to all of the information correctly.  When I check property COM1 resources, the station problem looks identical to the right station and no conflicts.  IRQ 04 corresponds to the current setting.  To get the workstation resurfaced to open COM1, I open COM1 properties, resource tab, uncheck and then re-check "use automatic settings" with your status to uncheck.  After having double checked the "use automatic settings", I click OK.  I then go back to see what the parameters are.  He changed his IRQ 07.  This change works until the computer has been restarted , and then the following steps must be applied again.  Also, if I perform these same steps on a workstation, I get the same results with the change IRQ.  I don't have the problem with com except COM1 ports.  We use the software in a box.  Change to use another com port is not an option.

  Thank you
  MANISH

  Hello

  Note that your computer is under domain, you must contact the TechNet forum, where we are the support technicians who are well equipped with knowledge on the issues of domain, do please visit the link provided below.

  http://social.technet.Microsoft.com/forums/en-us/category/windowsxpitpro

• Cannot open COM1. Please check your port settings

  I have some XP SP2 workstations that are used in the factory.  I use Clonezilla to reimage the workstations (Yes, we have valid licenses for all units) where you have to replace a hard drive or have warranty work that requires a new installation.  We have put arrangements in place on the specified comm ports.  The printer is connected to COM1.  When I test the appliance to make sure that all devices work, the test of the printer will not open COM1.  When I use Hyperterminal to test COM1, I get the message "cannot open COM1. Please check your port settings. "I checked the BIOS of a workstation and compare it to the non-working station.  Corresponding to all of the information correctly.  When I check property COM1 resources, the station problem looks identical to the right station and no conflicts.  IRQ 04 corresponds to the current setting.  To get the desktop put open COM1, I open COM1 properties, resource tab, uncheck and then re - check the box "Use automatic settings" without applying the Statute to uncheck.  After having double checked the "use automatic settings", I click OK.  I then go back to see what the parameters are.  He changed his IRQ 07.  This modification works until the computer has been restarted so the following steps must be applied again.  Also, if I perform these same steps on a workstation, I get the same results with the change IRQ.  I don't have the problem with comm except COM1 ports.  We use the software in a box.  Change to use a different comm port is not an option.

  It seems that the cloning process is causing the problem.  Clonezilla is fast and reliable with the exception of what seems to be a problem of comm port.  I'm looking for someone who can tell me what settings can I change to make COM1 to work without having to go through additional steps after the workstation is restarted.

  Thank you
  Rick

  Hello

  The question you have posted is adapted in the TechNet forums. Post your questions here for a better response.

  Here is the link: http://social.technet.microsoft.com/Forums/en-us/category/windowsxpitpro

• Check the installed oracle components are actually used in the database

  I got a new database I have to optimize. So I think to delete some installed components that I think are not be used somehow in the database (IE procedures calls etc.). I see a whole bunch of components as "ODD", 'ORDIM', which I think are not used, but previous DBAs have installed them. So, is it possible to make sure that no part of the database are actually using these components so that I can remove these components. Also, what are your expert comments on it?

  Is it a production or a development environment? If an object is not used then this isn't necessarily a problem (performance wise) unless it is either cluttering up your dictionary or raising concerns regarding the consumption of unnecessary space. Personally, I would recommend that it is preferable to resolve what is to be used / taken of resources. It is maybe once a year report or a few old utility out once a year, the best monitoring, why those things are there.

  If you go down the road of a fall, rather than drop anything immediately block accounts for an agreed period to ensure that the scheme is not used & check all references other schemas of objects in the schema that you intend to drop, potentially of audit to check if they are being called by other patterns / verification dba_dependencies between schemas and objects using a hierarchical query to check the sub-levels.

  There are also quite a few standard Oracle components that are installed by default that have interdependencies and not necessarily be used in the dictionary (control dba_features_usage_statistics)

• Can I get a cafeteria plan? I don't actually use a number of applications that I pay for.

  Can I get a cafeteria plan? I don't actually use a number of applications that I pay for.

  There are your options, pricing and membership creative cloud plans | Adobe Creative Cloud

• want to connect Apple TV but HDMI port is already in use.  Y at - it a triangle connector I can buy or?

  want to connect Apple TV but HDMI port is already in use.  Y at - it a triangle connector I can buy or?

  Sorry but no.

  Apple TV requires an HDMI cable and a HDMI port.

• How to find out what the police are actually using Firefox?

  How to find out what the police are actually using Firefox?
  Inspect the element don't say what substitute fonts.

  Firefox 24 ESR has the tab fonts in the Inspector, which shouldn't be a problem.

  • https://developer.Mozilla.org/Tools/Page_Inspector

• Error - there might not be a sound device installed on your computer, it can be used by another program, or it may not work properly.

  Original title: How do I install the audio device for windos xp driver.

  Tengo una don't destop pero no works el sonido y me lo siguiente al try using el windos Media Player appears: it might not be a sound device installed on your computer, it can be used by another program, or it may not work properly.   AS PUEDO HACER PARA CORREGIR EL ERROR!

  Hello hernan.

  ·         Do you get the Windows default sound on your computer?

  ·         You did it of any hardware or software changes on the machine before the show?

  You can follow this link and check if the problem persists.

  No sound in Windows

  Hope the helps of information.

  Please post back and we do know.

• BlackBerry Smartphones running on Mobile Internet to connect your computer to the Internet using your device

  Hello

  How can we get the subject facilities?

  If someone is using internet through the computer using the BB device.

  Thank you

  This article will help you to connect your PC to the internet using the BlackBerry as a modem attached.

  KB24629 - how to use the mobile Internet for tethering a BlackBerry smartphone to a computer using BlackBerr...

• Headphone port Broken, seek to use the MIC for the sound port

  Hey,.

  I have a laptop of 640 m Ispiron with Windows xp.

  I'm sure that the helmet is broken, anyone know how to get the audio output for headphones microphone Port?

  Is it possible to pass the customs of the ports?

  I use the SigmaTel card, I don't know the model.

  I was looking through the forums and I found this:

  http://dellcommunity.com/supportforums/board/message?board.ID=insp_audio&message.ID=29912

  I gave it a try but it wasn't what I wanted, either he did not because I cannot hear anything through my mic port yet.

  Also I can not all the sounds down my laptop speakers, I'm sure its because audio is stuck on the helmet, I tried to push the helmet a few times it triggers to speakers, but this is a no go!

  I know the speakers work because I could hear the sound when I did the thing Dell Diagnostics.

  Message edited by Kablamtron on 05/22/2008 10:49
  
  

• Is it possible to load your phone with the Office using the cord with head phone the ends of both sides?

  Is it possible to load your phone with the Office using the cord with head phone the ends of both sides?

  No, only USB.

  Taken head phones don't have any power.

• Tried to put in place the disc exchange for cluster (reduce the data being replicated for SRM). How can I know if vms are actually using it?

  To try to reduce the volume of data that is being replicated through NetApp snapmirror, I configured the cluster to use a separate Exchange disc. Then I restarted one of the virtual machines. But I don't know how to tell if it actually uses the disc Exchange

  You will need to turn off and turn on virtual machines, a reboot of the guest operating system is not enough.

  JD

• How can you save your pictures on a disc using photoshop 13?

  How can you save your pictures on a disc using photoshop 13?

  It depends on your computer and the write speed of your disc burner.

  Try to bring in smaller batches; see if that helps.

• Win Server 2003 Sp2, "port 808 is in use"

  I tried to install Oracle XE 11.2 (after the abduction of Oracle XE 10.2) and I get this error "Port 808 is in use... ", but I get this error for any port I choose...
  
  How to solve this problem?
  
  concerning

  Also, make sure that there is no antivirus or anti-malware software.

• To open this workbook, your computer must have a version of Microsoft Excel is installed and your Web browser must support opening files directly from Excel in the

  Im trying to open an excel file from a shared Web site, I used to be able to open them in Excel, when I used Internet Explorer, now all I see is the spreadsheet on a Web page, when I try to open the file in Excel (there is a tab that asked do you want to open in excel) I get a message "to open this workbook, your computer must have a version of Microsoft Excel is installed and your Web browser. must support opening files directly from Excel in the browser. »

  You have Excel installed?
  
  If so, can you use Internet Explorer for the Web site?

  As far as I KNOW, Microsoft is not an add-on for Firefox can be opened from Excel in Firefox. It may or may not work properly depending on whether this Web site uses a MIME type for files it delivers.

  Another way to handle that would be via Open Office or free agency; both are open source (free) that allows to display files XLS (Excel) , and both programs have a Mozilla browser plugin to allow Firefox to open the 'Calc' of these programs.

  http://en.Wikipedia.org/wiki/LibreOffice
  
  http://en.Wikipedia.org/wiki/OpenOffice.org > http://en.wikipedia.org/wiki/Apache_OpenOffice