want to 5530: 5530 error b8156d40

Similar Questions

• want to 5530: error: is not installed driver for WSD print device

  I'm trying to install the software on the HP Envy 5530 contect to my Dell Windows 7 Home Enterprise laptop runing.  I have installed and uninstalled. use the web and the installation disk but when I check the printer it shows a warning triangle with an exclamation point (!), which tells me he needs in case of a problem.  I get the error "WSD print device driver is not installed.  Please help me.

  I think I tried your 3 bullets without result.  I tried to print wireless HP Center regions, but I'll start over and focus my efforts in this area by the top.

  Seems not a problem of the printer "not found".  The printer Hp Envy 5530 is listed. but shows an icon indicating the troubleshooting is required.  See this link from dropbox http://1drv.ms/1zODxEY

  Having said that, however, when I try to print your word document, I got a message "no printer installed": http://1drv.ms/1AgOqEE

  Bottom line, it is not resolved yet.  Dang it.

  Thanks for your help.  I persevere and hope to get it resolved.  I will answer when I do.

• Uninstalled McAfee Security, but I continue to the popup error report 'McAfee Security Center had to close"asking if I want to send an error report.

  Original title: error reports

  I uninstalled McAfee Security, but now I get the popup error report 'McAfee Security Center had to close"asking if I want to send an error report. When I click on 'do not send', another error report immediately appears. No idea how can I stop this? At the present time, I have 9 popups error report in my taskbar.

  Ed

  Hello

  This problem can be caused if McAfee Security is not completely uninstalled.

  1. Why did you uninstall McAfee Security?

  2 have you tried sending the error report?

  3. What are the content of the popup of 9 error report?

  I suggest you to uninstall McAfee completely the link security.

  How to uninstall or reinstall supported McAfee products using the tool of Consumer Products Removal (Development):

  http://service.McAfee.com/FAQDocument.aspx?ID=TS101331

  If the problem persists, then I suggest you to contact McAfee support:

  http://www.McAfee.com/us/support.aspx

  If you need further assistance on this topic, let know us and we will be happy to help you.

• HP Envy 5530: Error server connection HP Envy 5530 trying to send scan / /wi - fi WINDOWS 8.1

  Reader threads does not help me.  Go to the proposed link does not help me.  I have given limited because wi - if is so expensive and I have no other options.  I tried Windows 10 and worked my way through all the messages of error except one.  Did not want to face once again and got rid of him, to get my last backup.  Very well. All right, EXCEPT that I can not scan from my printer to my laptop (HP).  When it comes through, it is only a small part of the page.  It was a document, but I tried photo.  I can't scan to e-mail.  SERVER CONNECTION ERROR. I stopped and restarted everything.  The only way I can get a scan to my laptop is to initialize it ON my laptop.  I desperately need a 'real user' answer, not an answer computer-speak.  I can't browse any information written due to the use of the data.  The drivers are all up to date on the news on the computer.  After fighting Windows 10, I have no patience!

  Hey @GRAMMIEBUD,

  I see you are having a connection to the server error when you use the Email scanning on your desire 5530 e - all - in - one printer. I can help you with that.

  To clear the error:

  1. On the printer, click web services icon in the upper left corner of the screen.
  2. Click on the gear.
  3. Click on delete Web Services.
  4. Click the web services.
  5. Click on Setup and Yes.

  At this point, you should be able to activate and use the Email scanning on your printer. Please let me know the results of the rest of the foregoing. If you can use the scan to e-mail, click on accept solution. If you appreciate my help, please post it by clicking the thumbs up icon. The two icons are below this post.

• Want to 5530:5530 does not print black

  5530 printer worked very well. Black print cartridge ran out of ink. Replace the cartridge-no black printing, single color.  Thought that the replacement could be a dud. Put another in (both HP brand, out of the box). Still no black printing. Has made many attempts cleaning via the screen and computer connected with USB. Nothing. It prints a blackish color when I took out cartridge black - using composite of tri color cartridge.  Removed the cartridge, turn the printer power off, turned back, left overnight, unplugged, ran doctor Scan.  Still no black printing.

  Why this suddenly wouldn't work not afte replace this cartridge?

  Hi @Weaver1953

  Do you receive for example error messages missing cartridge? Try to clean the little electrical contact pads on the back of the ink cartridge and also take a look at where they are sitting in the printer to make sure that nothing has been damaged when you have replaced the cartridge empty. Sometimes if they are not aligned properly it can cause an error of rejection.

  However, if the printer accepts the cartridge and print, but the black ink is just absent, this suggests a problem with the cartridge and not the printer. If this is the case I suggest to get the cartridges to where you bought them or you could try calling the phone support, you can benefit from replacement cartridges. Theres a link below for phone in the world supported by the numbers:

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  I hope this helps!

• All-in-one HP Envy 5530: printing on all-in-one HP Envy 5530 error

  I got this special printer for less than a year and this is the first problem I've had with her.

  Recently, whenever I try to print something, I click Open Active printers and after a while the work in the print queue displays "Error-printing" and will not start the print job.

  He also said that it is properly connected to my network so I reinstalled the software and drivers and restarted my system trying to solve the problem but there was no change.

  Hello @BryanMiller, hope you are well!

  Thanks to their participation in Forums of HP! I see by your post that you are having problems printing using printer Envy 5530. I will definitely do my best to help you.

  First of all, we will try to solve this problem using print HP and Scan Doctor (PSDR). PSDR is an automated tool that allows you to diagnose and resolve problems printing and scanning. Visit http://hp.care/2bZ9w2q to download and run the HP PSDR. Once you open the program, click on "Printing problems" to diagnose and fix the problem automatically.

  Please let me know if it works for you.

  Good luck!

  Please click on 'acceptable' on the post that solves your problem to help others to find the solution. To show gratitude for my help, please click the 'Thumbs Up icon' below!

• want to 5530: cannot connect wireless

  I recently bought a HP 5530 want printer.  The printer connects to my WiFi, but the computer does not connect to the printer wireless - also, there was no included USB cord so I can't print.  Do you know how to solve this.

  Hello rebekah1,

  Welcome to the HP Forums.

  I see that you experience a problem when you try to connect the printer to your Mac with a wireless connection.

  I have some suggestions that we can try to solve this problem for you.

  First of all, please make sure that you have the printer power cable connected directly to a wall outlet and not a bar/power strip. Here is a document that uses a LaserJet printer for example, but it is intended for HP products in general. Please click the link which explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

  Please click on the following link for instructions on How to reset the printing system.

  The following link, I have for you gives instructions on how to repair disk permissions.

  Once the first two steps, please click on the last link to the HP ENVY 5530 e-all-in-One Printer series full feature software and drivers.

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thanks for your time.

• HP Envy 5530: Error Code C4EBA2D1

  Turned on my HP Envy 5530 print and the error on a blue screen Code C4EBA2D1 poster on the printer with all the flashing lights of the suggestions would be appreciated!

  Hello

  Please try:

  (a) to unplug the printer for 1 minute,
  (b) bilge while disconnected the power button for 20 seconds,
  (c) plug it in again.

  Kind regards.

• Want to 5530 failed to update 08/04/2014

  After update (?) the 5530 "2014-04-08" envy, Version32.2, 110.49 M many problems have arisen.

  #1-can't scan or from the computer (via USB or NET) - can scan to SD card.

  #2 when you are trying to solve this problem, the following error message appears:

  "The comprehensive software solution is not installed on this computer.

  Click - 'install software' - watch download - then "download failed".

  Other info: "print and scan the doctor 4.3" does not work.

  Several attempts to repair or uninstall and reinstall the software failed.

  Message: ' PROPSYS.dll is not designed to run Windows or.

  It contains an error"arose from time to time.

  FYI - the basic features of printer worked fine for months without incident.

  Instant access to the web ink still - works but not the computer.

  Computer system: WIN 7 (64)

  Help, please.

  28/09/2013

  This user has the same basic problem: "ENVY 5530 All in One not founf when you try to scan from Printer Wizard."

  -No solution listed in Blog.

  Thank you for this answer.

  Yes, it seems that you receive two error messages when you attempt to install the 5530 like software. I would like to start off the power using this tool called Microsoft Fix it, which will fix all the problems that programs cannot be installed or uninstalled: (this information is shown here.)

   

• want to 5530: printing from a memory card

  Still learning my new 5530 wanted.

  Now, I would like to know how to print from a memory card.

  I'm a little confused about how to insert the card.  Yes, I looked on the HP site, with illustrations, how to do this.

  I see that this map will turn.  Cards have printing on one side and points of contact brilliant (?) on the other.   I can't say which way to insert illustration.

  When I insert the card, will be the impression show on my left and connected to the right contact points?  I suppose that the end with the contact points would be first inserted in the printer.

  Again, hope this question makes sense to you.   I am an old-challenged person technically, but I'm trying so hard to learn.  My fear is that if I insert the card the wrong way, he would be stuck in the printer - so what to do?  Thank you!

  Hello

  You must insert the card with the impression should show right (the label should be directed to the input tray and bright contacts must point to the left, indeed the side with the contacts must be inserted first into the printer.

  You can view the following video, even if it is taken from another model that the card must be inserted exactly as shown:

  https://www.YouTube.com/watch?v=9iKTIWf7LZM

  Hope that helps,

  Shlomi

• want to 5530

  I just bougt garage a 5530 envy. Plugged into the power supply. Lights, printer makes a noise and then turns off. Cannot turn it on. So, it seems to have failed in step 1. Help!

  It's defective. Resume and return it for another unit.

• want to 5530: 5530 Offline

  Hello.  Ive read the messages on the 5530 like offline.  Ive downloaded the Scan doctor, software reinstalled, converted to &, etc, etc.  I can print from my iphone but not my laptop.  What is the solution?  Will be

  Hello

  Thank you for using the forum.

  The following articles may be useful for you:

  1. Windows 8 - http://support.hp.com/us-en/document/c04249080

  Have you never print correctly?

  If you were, we can suggest that you try to use a TCP/IP port?

  Here are the steps to do so;

  Creating a TCP IP port

  1. Print a Configuration Page to get the printer IPv4 address (you can also tap on the icon wireless on the front panel of your printer to obtain the IP address)
  2. On your PC, go to control panel configuration, devices and printers, right-click the printer and on the left, click printer properties, select the Ports tab.
  3. Click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.
  4. Type the IP address for the printer.

  Note that you can ALWAYS go back to the original port the HP software installed by selecting the HP port on the Ports tab (in the properties of the printer)

  Hope that helps.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement.

• want to 5530: electronic address assigned to my printer was not found

  Hello

  This is a crazy question, but I'm new to this...

  I've just hung up my new printer and in the process, I assigned an email address to it.

  It works very well. But I can't remember what was the address, does anyone have an idea where to find?

  I changed the first name, then it when something like @hpprinter...

  Thanks for any help,

  Silverbuzz

  Hey @silverbuzz,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I understand that you have assigned an ePrint address your 5530 desire, but are unable to find it. I can help you with that.

  To find ePrint printer address from the main screen of the printer click web services icon in the upper left corner of the display screen.

  If this solves your problem then please let other users of the forum know clicking on accept as Solution below my post.

  I hope this helps and I hope you have a nice day!

• want to 5530: always print does not correctly

  I just got this printer... and wanted to print photos of my work and letters but no... I made the doctor three times resets and changing impression... keep fault tests... Any advice?

  I'm not real happy with replacement of the cartridge and spend more money for something that is supposed to work straight out of the box... If it works... well then I'll pass the info on to my clients

  HP has a replacement of the defective elements program?

• Want to 5530: scanning

  Given that the update to windows 10 will not complete scan of photos - just scan people separately

  Hello
  
  Thank you for using the HP forum.

  The following resource will explain where the settings are to scan a complete photo as a document.

  HP Deskjet 2540 scanning tips

  https://goo.GL/qfQyf4

  Hope that helps.