want to 5530

Similar Questions

• want to 5530: cannot connect wireless

  I recently bought a HP 5530 want printer.  The printer connects to my WiFi, but the computer does not connect to the printer wireless - also, there was no included USB cord so I can't print.  Do you know how to solve this.

  Hello rebekah1,

  Welcome to the HP Forums.

  I see that you experience a problem when you try to connect the printer to your Mac with a wireless connection.

  I have some suggestions that we can try to solve this problem for you.

  First of all, please make sure that you have the printer power cable connected directly to a wall outlet and not a bar/power strip. Here is a document that uses a LaserJet printer for example, but it is intended for HP products in general. Please click the link which explains the problems when connected to an uninterruptible power supply/Strip/surge protector power.

  Please click on the following link for instructions on How to reset the printing system.

  The following link, I have for you gives instructions on how to repair disk permissions.

  Once the first two steps, please click on the last link to the HP ENVY 5530 e-all-in-One Printer series full feature software and drivers.

  If troubleshooting doesn't help not solve your problem, then I would say call the HP Technical Support to see all the other possibilities for you. If you call in North America, the number is 1-800-474-6836 and for all other regions, please click here: click here.

  Thanks for your time.

• want to 5530: printing from a memory card

  Still learning my new 5530 wanted.

  Now, I would like to know how to print from a memory card.

  I'm a little confused about how to insert the card.  Yes, I looked on the HP site, with illustrations, how to do this.

  I see that this map will turn.  Cards have printing on one side and points of contact brilliant (?) on the other.   I can't say which way to insert illustration.

  When I insert the card, will be the impression show on my left and connected to the right contact points?  I suppose that the end with the contact points would be first inserted in the printer.

  Again, hope this question makes sense to you.   I am an old-challenged person technically, but I'm trying so hard to learn.  My fear is that if I insert the card the wrong way, he would be stuck in the printer - so what to do?  Thank you!

  Hello

  You must insert the card with the impression should show right (the label should be directed to the input tray and bright contacts must point to the left, indeed the side with the contacts must be inserted first into the printer.

  You can view the following video, even if it is taken from another model that the card must be inserted exactly as shown:

  https://www.YouTube.com/watch?v=9iKTIWf7LZM

  Hope that helps,

  Shlomi

• want to 5530: error: is not installed driver for WSD print device

  I'm trying to install the software on the HP Envy 5530 contect to my Dell Windows 7 Home Enterprise laptop runing.  I have installed and uninstalled. use the web and the installation disk but when I check the printer it shows a warning triangle with an exclamation point (!), which tells me he needs in case of a problem.  I get the error "WSD print device driver is not installed.  Please help me.

  I think I tried your 3 bullets without result.  I tried to print wireless HP Center regions, but I'll start over and focus my efforts in this area by the top.

  Seems not a problem of the printer "not found".  The printer Hp Envy 5530 is listed. but shows an icon indicating the troubleshooting is required.  See this link from dropbox http://1drv.ms/1zODxEY

  Having said that, however, when I try to print your word document, I got a message "no printer installed": http://1drv.ms/1AgOqEE

  Bottom line, it is not resolved yet.  Dang it.

  Thanks for your help.  I persevere and hope to get it resolved.  I will answer when I do.

• Want to 5530:5530 does not print black

  5530 printer worked very well. Black print cartridge ran out of ink. Replace the cartridge-no black printing, single color.  Thought that the replacement could be a dud. Put another in (both HP brand, out of the box). Still no black printing. Has made many attempts cleaning via the screen and computer connected with USB. Nothing. It prints a blackish color when I took out cartridge black - using composite of tri color cartridge.  Removed the cartridge, turn the printer power off, turned back, left overnight, unplugged, ran doctor Scan.  Still no black printing.

  Why this suddenly wouldn't work not afte replace this cartridge?

  Hi @Weaver1953

  Do you receive for example error messages missing cartridge? Try to clean the little electrical contact pads on the back of the ink cartridge and also take a look at where they are sitting in the printer to make sure that nothing has been damaged when you have replaced the cartridge empty. Sometimes if they are not aligned properly it can cause an error of rejection.

  However, if the printer accepts the cartridge and print, but the black ink is just absent, this suggests a problem with the cartridge and not the printer. If this is the case I suggest to get the cartridges to where you bought them or you could try calling the phone support, you can benefit from replacement cartridges. Theres a link below for phone in the world supported by the numbers:

  http://WWW8.HP.com/us/en/contact-HP/WW-contact-us.html

  I hope this helps!

• want to 5530: always print does not correctly

  I just got this printer... and wanted to print photos of my work and letters but no... I made the doctor three times resets and changing impression... keep fault tests... Any advice?

  I'm not real happy with replacement of the cartridge and spend more money for something that is supposed to work straight out of the box... If it works... well then I'll pass the info on to my clients

  HP has a replacement of the defective elements program?

• want to 5530: 5530 Offline

  Hello.  Ive read the messages on the 5530 like offline.  Ive downloaded the Scan doctor, software reinstalled, converted to &, etc, etc.  I can print from my iphone but not my laptop.  What is the solution?  Will be

  Hello

  Thank you for using the forum.

  The following articles may be useful for you:

  1. Windows 8 - http://support.hp.com/us-en/document/c04249080

  Have you never print correctly?

  If you were, we can suggest that you try to use a TCP/IP port?

  Here are the steps to do so;

  Creating a TCP IP port

  1. Print a Configuration Page to get the printer IPv4 address (you can also tap on the icon wireless on the front panel of your printer to obtain the IP address)
  2. On your PC, go to control panel configuration, devices and printers, right-click the printer and on the left, click printer properties, select the Ports tab.
  3. Click Add Port, select the Port TCP/IP Standard, then New Port and follow the instructions in the wizard.
  4. Type the IP address for the printer.

  Note that you can ALWAYS go back to the original port the HP software installed by selecting the HP port on the Ports tab (in the properties of the printer)

  Hope that helps.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement.

• want to 5530: electronic address assigned to my printer was not found

  Hello

  This is a crazy question, but I'm new to this...

  I've just hung up my new printer and in the process, I assigned an email address to it.

  It works very well. But I can't remember what was the address, does anyone have an idea where to find?

  I changed the first name, then it when something like @hpprinter...

  Thanks for any help,

  Silverbuzz

  Hey @silverbuzz,

  Welcome to the HP forums! I hope you enjoy your stay here.

  I understand that you have assigned an ePrint address your 5530 desire, but are unable to find it. I can help you with that.

  To find ePrint printer address from the main screen of the printer click web services icon in the upper left corner of the display screen.

  If this solves your problem then please let other users of the forum know clicking on accept as Solution below my post.

  I hope this helps and I hope you have a nice day!

• Want to 5530 failed to update 08/04/2014

  After update (?) the 5530 "2014-04-08" envy, Version32.2, 110.49 M many problems have arisen.

  #1-can't scan or from the computer (via USB or NET) - can scan to SD card.

  #2 when you are trying to solve this problem, the following error message appears:

  "The comprehensive software solution is not installed on this computer.

  Click - 'install software' - watch download - then "download failed".

  Other info: "print and scan the doctor 4.3" does not work.

  Several attempts to repair or uninstall and reinstall the software failed.

  Message: ' PROPSYS.dll is not designed to run Windows or.

  It contains an error"arose from time to time.

  FYI - the basic features of printer worked fine for months without incident.

  Instant access to the web ink still - works but not the computer.

  Computer system: WIN 7 (64)

  Help, please.

  28/09/2013

  This user has the same basic problem: "ENVY 5530 All in One not founf when you try to scan from Printer Wizard."

  -No solution listed in Blog.

  Thank you for this answer.

  Yes, it seems that you receive two error messages when you attempt to install the 5530 like software. I would like to start off the power using this tool called Microsoft Fix it, which will fix all the problems that programs cannot be installed or uninstalled: (this information is shown here.)

   

• Want to 5530: scanning

  Given that the update to windows 10 will not complete scan of photos - just scan people separately

  Hello
  
  Thank you for using the HP forum.

  The following resource will explain where the settings are to scan a complete photo as a document.

  HP Deskjet 2540 scanning tips

  https://goo.GL/qfQyf4

  Hope that helps.

• want to 5530: 5530 error b8156d40

  My printer was working fine until today. After having turned it on it give a blue screen with the error b8156d40 that goes off quickly and just then white screen with written error printer on top and then 'there is a problem with the printer. Turn off the printer on again once". Help, please.

  Thank you

  Hi, these issues can be associated with wifi, rather than the printer.

  Either connect to your Wifi for wireless directly in the Wizard located by selecting the printer wifi,

  We suggest that you use a USB cable to check.

  Worth a try.

  Best regards, Josem

• Want 5530: Long delays want printing 5530 All in One

  Our printer worked beautifully for a long time.  Now, he seems to have an unusual problem.

  When print us something, there is a long delay before the start of printing.  Once printing begins, sometimes to normal speed.  I have not measured the delay to see if it is still the same amount of time.  The delay is measured in minutes.  Often I'll print something and then go do something else until I hear the printer start printing.  During the time I am waiting, responses to the ping packets very good printer.  It is suitable to the management tools and access via its web page (as long as you do not ask to print something).  That tells me that it is not a network problem.  T.He network in our House is wireless.  We tried printing from several different computers to Windows 7, and the behavior is the same.

  The version of the firmware on the printer is ORL1CN1547AR.  Updated HP says that there are no newer drivers available for my system.  I find anywhere that my computer is going to give me the version number of the installed drivers.

  I tried power cycling the printer several times.  My laptop is restarted daily.

  No idea where to go from here?

  Hi ppeters86,

  Please try printing HP and the Scan doctor for me!

  What happens if you make a copy of the glass of the scanner of the printer? You get the same type of delay? Copy of Documents or Photos.

  In the meantime, we will try to disable IPv6 on the printer to ensure that IPv4 is used by your printer and your router on your network.

  • If your printer has a control panel with display, find the IPv6 settings in the advanced network configuration menu and set it Off orDisabled.

  • If your printer does not have a display, use the built-in webserver (EWS) to disable IPv6.

    1. From a computer on your network, type the IP address of your printer in the field URL of your Internet browser.

       NOTE:

       If the Web page appears empty, try another Internet browser.

    2. Click on the network or network tab and open the section or page corresponding to your type of network: wired or wireless.

    3. Select enable IPv4 only (or similar).

       Figure: Example of IPv4 configuration

       

    4. Click on apply and wait for changes are confirmed.

    5. Try to print again.

  If it helps, please consider clicking on "accept as a solution." And, please click the thumbs up icon. The two icons are below this post.

  I hope hear from you soon!

• want to 5530: double-sided printing

  When I run a duplex I get "page 1, page 2, etc." at the bottom of the page. I can cancel that. Any body knows how to cancel this text?

  This impression is controlled by your software application. You have to find in the software and disable it.

• want to 5530: printers hp envy 5560

  There is only one type of file: PDF I do jpg or jpeg file scanner.   How can I change?

  Hello

  Thank you for using the forum.

  You have downloaded and installed the software features FULL?

  Here is the link for convenience:

  http://support.HP.com/us-en/drivers/selfservice/HP-envy-5660-e-all-in-one-printer-series/6809225/model/6809226

  Once you have downloaded and installed the full software features, you can use the scanning software to scan in jpeg format.

  videos relevant following may be useful:

  Scanning multiple photos:

  HP Officejet Pro 8630

  https://goo.GL/ADYDmo

  Scan multiple pages to a PDF document

  https://goo.GL/NcB2oc

  Hope that helps.

  Please click on "Bravo Thumbs up" as an encouragement and "Accept as solution" if it helped to solve your problem.

• Selective impression want 5530

  I installedthe just want to 5530 on our wireless network and am printing from HP with Windows 8 computers.  Had no problem installing and printing documents.  Hard to explain, but will use an example.  I order a ticket of entertainment of a website and gave the option for eprint.  When I select and ticket views and I click to print or in the case of Adobe use their right print icon, it brings up a print menu.  My only option is to save or cancel.  So I save to a PDF and then open it in Adobe reader software in order to print.  Why can I not print directly instead of doing a work-around.  Has never been a problem with my old HP printer.

  While I'm at it, why can't I have a color print in black & white.  This option is no longer under properties.

  Hello

  You can use Google Chrome?

  Its default destination will "print to PDF" and not your printer. such will show a Save Cancel buttons as described...

  Click on change button below the Destination and select your printer, and then set the white and black color & and try printing.

  Please let me know if that can help you.

  Shlomi