want to 810-430qe CTO: 810-430qe CTO... of the usb ports 3.0 and 2.0 ports, which are which?

Similar Questions

• I want to get comp.mouse working again, was using the usb port.

  damthisthing

  I would like to get COP mouse works again

  Hi frankdnls640,

  (1) remember you to make changes prior to this problem?

  (2) what is the number of brand and model of your computer (and mouse)?

  Method 1: If it's a USB (Universal Serial Bus) mouse, unplug and reconnect the mouse into a different USB port and then check to see if it works fine.

  Method 2:  Using the keyboard, run the fixit available in the link below.

  Hardware devices do not work or are not detected in Windows http://support.Microsoft.com/mats/hardware_device_problems/en-us

• When I plug in the USB on my netbook and you want to open, it tells me that there is no disc in the drive?

  Original title: BAD USB

  I have an Acer netbook. I was able to download my photos from my computer on a USB key until a few days ago. When I plug in the USB on my netbook and you want to open, it tells me that there is no disc in the drive?  Why does it say this?

  I am confused with this... I really hope someone can help me.

  Thank you for your time in doing

  Dido

  Hey Toni-LeeFurlotte,

  ·         Have you tried to connect to a different USB port?

  Method 1: Try to connect the USB key to a different port on the netbook and check the issue. You can also connect the drive to another computer and see if the problem persists.

  Method 2: Update of the netbook with the latest chipset drivers. In addition, install other updates of the device driver. Log in the Web site of the manufacturer to do the same thing.

  Method 3: This problem can also occur if there is a drive letter conflict. A drive letter conflict occurs if the disk that is affected by the error is mapped to a reserved drive letter. I suggest you try to change the drive letter.

  How to change drive letter assignments in Windows XP

• I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or the usb ports

  Help with my computer of dumping

  I have windows xp and I want to completely empty my computer and start from scratch, but now my computer will not read the disk drive or usb ports. How can I do this without the disc?

  If there is anything physically wrong with your hard drive, you can use Darik Boot and Nuke (DBAN aka) to make a scrub of the security of your HARD drive. Glance to download here.

• Want to 700-430qe: installation of the establishment by car hides after the

  I installed a 64 GB mSata drive to use as a cache drive, and while the drive looks very good I not give me the opportunity to set up as a cache drive.

  I have installed Intel Rapid Storage Tech software and the drive also appears in this software very well but I not give me the option there either.

  I had already gone into bios and set it for Raid, i.e. the instructions, but not option thereafter.

  I don't know why my answer disappeared and the steps I need to take to make it work, but I had to open at least 200 megabytes of unallocated on the hard drive and then the software space intel allow me to configure the cache drive.

  Then I let the megabytes about 201 open just in case she had to continue to use it for something, more it was only 200 megabytes so I don't lose really but a very small amount of space.

• the usb ports and DVD drive on my laptop of ts 17 want does not work correctly.

  My laptop dvd player cannot read software, flash drives and card readers and other usb devices d0esn ' t work correctly when inserted into the usb ports. I opened the Device Manager and noticed that the uj8c2 of ram dvd has a yellow triangle below. I clicked it and the State of the device as follows: WINDOWS cannot CE HARDWARE NOT CHARGE THE DEVICE. THE DRIVER MAY BE CORRUPTED OR MISSING. (code 39). the error status was ox x %. Today, I downloaded technical assistance from hp and when he ran a check on the system, it recommended two options for downloading 1. HP NOTEBOOK SYSTEM BIOS UPDATE (processors intel). 2 HP PC HARDWARE DIAGNOSIS UEF. I tried to download but were not available. I don't know if this problem can be corrected by the Manager of recovery so please let someone help out me. This month will be the third month, since it was purchased. Thank you in advance for your answers.

  Hello:

  For the DVD player, please try troubleshooting step 3 on the link below.

  http://support.Microsoft.com/kb/314060

• I want to buy the usb 3.0 card and the wi - fi card for Pavilion Slimline s3760 form factor

  Please help me to locate the internal usb 3.0 card and the card WiFi for Pavilion slimline s3760. There been no wi - fi internal catd and usb 2.0 when I bought in 2009.  It is a small form factor of the cabinet, and so the cards normal donot enter. Also, will there be enough slots for the latter.

  Sorry for all the posts! Take a look at this one:

  http://www.Amazon.com/Koutech-SuperSpeed-adapter-low-profile-brackets/DP/B005FM8P3W/ref=sr_1_12?ie=UTF8&QID=1342556028&SR=8-12&keywords=low+profile+PCI+USB

  Here, it's to Koutech:

  http://www.koutech.com/prodDetail.asp?LineNumber=525

• I want to do a triple boot OS upward in the beginning. ME, XP and 7 7 disk version to buy?

  See above

  A full version of Windows 7 usually does not contain the word 'Upgrade' in the description.

  OEM version may work, but I know that any version of "put in a box" Microsoft of Windows 7 will work

  In regards to your new computer, you should have a process of creation of the disc to "re-install" Windows 7.

  Also, since you have a new computer, it would probably not drivers for Windows XP.  Given that Windows Me is even older, you wouldn't have a bit of luck with the drivers.

• I have photoshop CS3 and want to be able to process RAW images taken by my Canon 70 d and Olympus TG-4, which says it does not support these cameras.  How do I update CS3 then it will develop images in Raw on their part?

  Can someone tell me how do to be able to process RAW images in CS3 from my Canon 70 d and TG4 Olympus?

  You can not. RAW support is specific version and you are far behind the times to support any reasonably modern camera.

  Devices supported by Camera Raw

  Applications of camera Raw compatible Adobe

  Mylenium

• Want to put the new USB port in 2140CDS Satellite

  Hi, I have a Toshiba satellite 2140 CDS. There is only a single usb port, I want to change the usb port because it is broken, and if possible I want to get a docking station or port replicator. can u give me a suggestion.

  Hello

  the best way is to contact a Toshiba service partner to get the right parts for the USB port.

  You can use this port Duplicators:
  USB 2.0 Port Replicator II (Ethernet / EU Version) PX1173E-1PRP
  USB 2.0 Port Replicator II (Ethernet / UK Version) PX1173U-1PRP

  Good bye

• The port Thunderbolt can we adapt for USB3 ports. I have a laptop Macbook Pro with processor 2.2 Ghz, HDD 256 GB, 16 GB of memory, operating system El Capitan. I want to add up to three additional 3 USB ports with an adapter. Is there an excellen

  I have a laptop Macbook Pro with processor 2.2 Ghz, HDD 256 GB, 16 GB of memory, operating system El Capitan. I want to add up to three additional 3 USB ports with an adapter. Here are all excellent adapters available on the market to achieve this goal? If so, what are they, and they are available to plug in the USB ports and / or Thunberbolt on my laptop?

  I purcahsed an adapter but it only matches a port of type C, which is not on my new laptop.

  Thanks,-John D.

  What month / year is your Macbook Pro?

  Also is what size?

  i.e. of Macbook Pro (13 "Early 2011)

  If you need a crush on USB3, see this OWC. http://eShop.MacSales.com/shop/Thunderbolt/dock/OWC/Thunderbolt2-dock/?_ga=1.216 256982.1355932382.1452374654

  If your existing computer has USB3 ports, you could get a USB3 hub.

  Kim

• Iconia W3-810 cannot boot from the recovery disc

  Hi, I have a 32 GB Iconia W3-810.  The original recovery disk was lost.

  I made a Bootable DVD of 8.1 and also Win 8.1 bootable USB key.  These two have been tested on another laptop, and both can start this laptop to the installation environment.

  I also followed the guide to enter the BIOS of the Acer Tablet settings and change the boot order and change remove secure boot option.

  Unfortunately the unit keeps trying to start in Windows 8.1 - one who is full of viruses and should be flattened and start over.

  Help, please...

  Many of these cables power the Tablet via the splitter, but do not provide power at the side of the data cable from the side power (I don't think I explained that well). They are designed to power your device on the motor side while allowing access to data on the other side. If connected:

  Tablet- + - power
  
              |
  
              |
  
             DVD

  The Tablet receives power supply and Tablet provides the voltage and sends and receives data from DVD, but power does not give voltage on DVD. This means that the DVD does not necessarily receive the budget power that he needs.

  If you can, try the DVD connected to a powered hub. Turn upwards and actually to work are two different things, and tablets offer far less than the maximum power on their USB ports.

• Iconia Tab 8 W1-810 W suddenly stopped the automatic screen rotation

  Hello.

  I m havving problems with my Iconia Tab 8 W W1 - 810. He suddenly stopped the automatic rotation of screen and now I can´t find the box "Enable rotation of the screen. I have only the chance to put in landscape or portrait, but not in automatic rotation.

  How can I enable automatic screen rotation again?

  I would much appreciate your help.

  Thank you, Justin!

  I tried this, but as I no longer had an automatic rotation checkbox, I couldn t solve the problem.

  The solution came through the cat of Acer service. Acer technician Mukesh was very nice and patient, we tried all possible options, but the auto-rotation option was not available, the only way to recover is to install the proposed pilots:

  http://global-download.Acer.com/GDFiles/driver/platform%20Drivers/platform%20Drivers_Intel_10.18.10...

  After installing these drivers, I got automatic rotation check box and could solve the problem.

  I am very happy that I could solve the problem and very happy with the Acer´s customer service.

  Thanks for your suggestion.

  Kind regards

  Maria Ines.

• I have an apple phone 5 and I wanted to know if it was safe to download the beta version of IOS 10?

  I have an apple phone 5 and I wanted to know if it was safe to download the beta version of IOS 10?

  Beta software may not be discussed in the public forum. If you are interested in beta iOS, you must take a look at this FAQ page. Beta of iOS should not be loaded on a device for daily use, it's really for testing only. https://beta.Apple.com/SP/betaprogram/FAQ

• IPhone flattened my mother fell and broke her screen and I bought a new Yvonne, but I want to know the iPhone ID forget him, I can send the IMEI or help me so that I change the iPhone to my mother and I thank you

  IPhone flattened my mother fell and broke her screen and I bought her a new iPhone, but I want to know the iPhone ID forget him, I can send the IMEI or help me so that I change the iPhone to my mother and I thank you

  Yvonne > > iphone

  Sorry