When I plug in the USB on my netbook and you want to open, it tells me that there is no disc in the drive?
Original title: BAD USB
I have an Acer netbook. I was able to download my photos from my computer on a USB key until a few days ago. When I plug in the USB on my netbook and you want to open, it tells me that there is no disc in the drive? Why does it say this?
I am confused with this... I really hope someone can help me.
Thank you for your time in doing
Dido
Hey Toni-LeeFurlotte,
· Have you tried to connect to a different USB port?
Method 1: Try to connect the USB key to a different port on the netbook and check the issue. You can also connect the drive to another computer and see if the problem persists.
Method 2: Update of the netbook with the latest chipset drivers. In addition, install other updates of the device driver. Log in the Web site of the manufacturer to do the same thing.
Method 3: This problem can also occur if there is a drive letter conflict. A drive letter conflict occurs if the disk that is affected by the error is mapped to a reserved drive letter. I suggest you try to change the drive letter.
How to change drive letter assignments in Windows XP
Tags: Windows
Similar Questions
-
HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter
HP Pavilion G6 computer 1093SA laptop does not charge when I plug in the power adapter
The battery is dead. When I try to turn on the laptop by plugging the AC adapter does not charge or led power LED does not turn on. But when I press the power button, the power, the indicator flashes and turns off (when power adapter connected).
(1) I tried the press and holding the power button for 30 seconds after removing the battery & AC adapter / CC.
(2) I tried to change the power adapter too.
The problem is that it is.
Your advice is very much appreciated.
Thank you best regards &,.
Zia
Dear customer,
Welcome and thanks for posting your question on the Forum of Support HP
It seems that you are not able to turn on the laptop and tried to solve the problem
Please perform steps listed to find out if it is a hardware or software problem below:
1. remove all cables and devices, disconnect them and try to turn on the device
2. check the LED light situation and ensure the action of the spring button / stop is normal
3 Exchange with a well known power cord and the AC adapter
4 Pack no adapters are available, check if the power adaptor is slightly warm
Note: This will give us an indication that the power adapter could be good
5. do you know if the laptop was in battery or power adapter when you used the last time
Note: Make sure that there is no spill of liquid or cutting
6. check if the Port of the AC adaptor is loose/broken
Note: If the laptop is not on even with a power adapter well known, this confirms the hardware failure with the system board or power DC Circuit
Hope this helps for other queries to answer the post and feel free to join us again
* Click on the star of CONGRATULATIONS on the left to say thank you *.
Make it easier for others to find solutions by checking a response "Accept as Solution" if it solves your problem.
Thank you
K N R K
I work on behalf of HP
-
Hello
I just got my new BB bold 9900. Has updated the OS to v7.1.714. Now I see not a helmet on the homescreen icon when I plug the headphones of BB. Although I get sound when I plug from the 3.5 mm plug.
Another issue is when I receive a call I am not able to hear the call, ringing on the headset, rather that I hear from the speaker as I would when no headset is plugged.
I heard that it is a common problem when an upgrade of the OS is made. Is there a solution? Help, please!
Hello crazygamerg7,
Welcome to the BlackBerry support community.
Thank you for your question about the helmet on the BlackBerry 7.1 software feature.
The headphones icon should only appear in within the phone application and not on the home screen when connected and on a call.
The ringtone will also go through the speakers of the device and not on taking 3.5 mm connected headphones. This is normal.
-
I have a drive mapped to the network, but (My Computer) icon is a folder. I get access denied when I click on the drive. But if I open windows Explorer, I can access the drive mapped without problems. Win Xp
original title: mapped drive error.Hello
Make sure that the mapped drive is configured to share and works on part.
Auto-mappage will not work if there is a problem with sharing.
Maybe this can help.
Make sure that the software firewall on each computer allows free local traffic. If you use 3rd party Firewall on, Vista/XP Firewall Native should be disabled, and the active firewall has adjusted to your network numbers IP on what is sometimes called the Zone of confidence (see part 3 firewall instructions
General example, http://www.ezlan.net/faq#trusted
Please note that some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible, configure the firewall correctly or completely uninstall to allow a clean flow of local network traffic. If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .
Windows XP file sharing - http://support.microsoft.com/default.aspx?scid=kb;en-us;304040
Sharing printer XP - http://www.microsoft.com/windowsxp/using/networking/expert/honeycutt_july2.mspxSetting Windows native firewall for sharing XP -http://support.microsoft.com/kb/875357
In Win XP pro you can visually see the setting of authorization/security and configure them according to your preferences.
http://www.Microsoft.com/windowsxp/using/security/learnmore/AccessControl.mspx#securityTab
When you have finished the configuration of the system, it is recommended to restart everything the router and all computers involved.
-
Original title: windows media problems
Why do my windows media sometimes not recognize that there is a disc in the drive when I am trying to burn music on the disc,If you restart WMP when this problem occurs, which helps?
It seems that the AutoRun or AutoPlay got disabled on your system. Please try the instructions in the following article to reactivate these:
-
original title: 'Open with' problem...
My office was attacked by malware. I have run virus scan and all updates that were available. When the operating system starts, a window opens asking me to "choose the program you want to open this file: file: rundll32.exe.". There are recommended programs and other programs, but I'm fairly certain that none of them are correct. Can anyone help direct me in the right direction to solving this problem? Every program I try to open, translates into an opening by asking the same question, but the file name changes to whatever program I am trying to the window. Thanks in advance for any help.
Hello
Just in case there are persistent pieces of malware here is the method of complete elimination.
.exe question difficulty in the next message.Try Mode safe mode with networking - repeatedly, press F8 that you start.
The best two methods allow scanners to run and/or AV.exe out of the way or removing.
1.
CTRL SHIFT ESC - task manager OR right click on the taskbar - task managerProcess tab - complete the process on AV. EXE and continue with the uninstall Guide.
If necessary use start - computer or Windows Explorer to navigate to
C:\Program Malwarebytes Anti - Malware\mbam.exe or where it is installed - if
necessary right click on the shortcut of Malwarebytes - Properties - tab - target line to see where it
is installed.Right-click on it and rename it to ZZMbam.COM (or something different than now) and
Double-click it, and then run it like this. You can rename it back later. Do the same with
other programs according to the needs. Use this method to others as needed - NOT assume all
a program deletes all or that it is no other malicious software.---------------------------------------------------
2.
Another method is to use them:Use Process Explorer to "Suspend" the process will not stop
Then use AutoRuns to delete the malicious program startup items.
Now use UnLocker to delete the files in the malware.
You may need to do a file at a time.
Process Explorer - free
http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspxAutoRuns - free
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspxUnLocker - free (do not install the adaware Ebay)
http://www.Softpedia.com/get/system/system-miscellaneous/unlocker.shtmlAV.exe
==============================================
The AV.exe malware goes by many names:
XP Internet Security 2010, Antivirus 2010 Vista and Win 7 Antispyware 2010 are thugs
antivirus, scams for you force to pay for them while they have no advantage at all.How to remove Vista Antivirus 2010 as well as the other varieties AV.exe.
http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Vista-2010RENAME this as necessary to allow them to perform: (use a different name with the extension .COM instead of .exe)
It can be made repeatedly in Mode safe - F8 tap that you start, however, you should also
Run them in regular Windows when you can.Download malwarebytes and scan with it, run MRT and add Prevx to be sure that he is gone.
(If Rootkits run UnHackMe)Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Malwarebytes - free
http://www.Malwarebytes.org/Run the malware removal tool from Microsoft
Start - type in the search box-> find MRT top - right on - click RUN AS ADMIN.
You should get this tool and its updates via Windows updates - if necessary, you can
Download it here.Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
(Then run MRT as shown above.)Microsoft Malicious - 32-bit removal tool
http://www.Microsoft.com/downloads/details.aspx?FamilyId=AD724AE0-E72D-4F54-9AB3-75B8EB148356&displaylang=enMicrosoft Malicious removal tool - 64 bit
http://www.Microsoft.com/downloads/details.aspx?FamilyId=585D2BDE-367F-495e-94E7-6349F4EFFC74&displaylang=enalso install Prevx to be sure that it is all gone.
Download - SAVE - go to where you put it-right on - click RUN AS ADMIN
Prevx - Home - free - small, fast, exceptional CLOUD protection, working with the other security
programs. It is a single scanner, VERY EFFICIENT, if it finds something come back here or
Use Google to see how to remove.
http://www.prevx.com/ <-->-->
http://info.prevx.com/downloadcsi.asp <-->-->Choice of PCmag editor - Prevx-
http://www.PCMag.com/Article2/0, 2817,2346862,00.aspTry the demo version of Hitman Pro:
Hitman Pro is a second scanner reviews, designed to save your computer from malicious software
(viruses, Trojans, rootkits, etc.). who infected your computer despite safe
what you have done (such as antivirus, firewall, etc.).
http://www.SurfRight.nl/en/hitmanpro--------------------------------------------------------
If necessary here are some free online scanners to help the
http://www.eset.com/onlinescan/
New Vista and Windows 7 version
http://OneCare.live.com/site/en-us/Center/whatsnew.htmOriginal version
http://OneCare.live.com/site/en-us/default.htmhttp://www.Kaspersky.com/virusscanner
Other tests free online
http://www.Google.com/search?hl=en&source=HP&q=antivirus+free+online+scan&AQ=f&OQ=&AQI=G1--------------------------------------------------------
Also follow these steps for the General corruption of cleaning and repair/replace damaged/missing system
files.Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup
Start - type this into the search-> find COMMAND to top box and RIGHT CLICK-
RUN AS ADMINEnter this at the command prompt - sfc/scannow
How to analyze the log file entries that the Microsoft Windows Resource Checker
(SFC.exe) program generates in Windows Vista cbs.log
http://support.Microsoft.com/kb/928228Run checkdisk - schedule it to run at the next startup, then apply OK your way out then
turn it back on.How to run the check disk at startup in Vista
http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html-----------------------------------------------------------------------
If we find Rootkits use this thread and other suggestions. (Run UnHackMe)
I hope this helps.
-
original title: opening driver download manager
When I try to open the download, then click on save the file it tells me that there are no files. Can someone tell me what to do?
Hi VanesaHarbottle,
The following two articles, especially the second, should help you with the installation of new drivers:
Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.
Once you have the drivers, you can install them via the device as Manager
follows: http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.I hope this helps.
Good luck.
-
As I mentioned, the dialog box appears after every restart. It occurs after I entered my credentials to logon and proceeded to windows. It seems to be pretty late in the boot process that things like the chat programs and widgets are fully charged at the time wherever the dialog box is displayed.
The dialog box appears to be the 'Open with' dialog box in Windows 7 standard.
Specifically the dialogue reads as follows:
Choose the program you want to open this file:
File: Mathew [it's my user id and he showed not extension)If I open the file into something like Notepad, then the information below is presented (the # s are real numbers, but these looked like mac addresses, so I left)
===========================================================================
List of the interface
##...## ## ## ## ## ## ...... Dell Wireless 1510 Wireless-N WLAN Mini Card
##...## ## ## ## ## ## ...... NVIDIA nForce Networking Controller
#........................... Software Loopback Interface 1
#... # # # # # # # # Card Microsoft ISATAP
#... # # # # # # # # Teredo Tunneling Pseudo-Interface
#... # # # # # # # # Card Microsoft ISATAP #2
===========================================================================IPv4 routing table
===========================================================================
Active routes:
None
Persistent routes:
NoneIPv6 routing table
===========================================================================
Active routes:
None
Persistent routes:
NoneStartup in MSCONFIG includes:
ArcoTray - request for assistance Adobe Acrobat Distiller
Adobe Reader and Acrobat Manager
AVG Internet Security
CyberLink PowerDVD
Dell Support Center updates
Reference Dell Webcam Central
Dell Wireless card wireless network tray Applet WLAND
Google update
GoogleTalk
GrooveMonitor Utility
Digital Imaging HP - hp all-in-one serious
HpqSRmon Application
hpwuSchd Application
IDT Audio of PC
iTunes
Java platform
Logitech SetPoint
Microsoft Windows operating system
Microsoft Windows operating system (Yes, it is listed twice)
NVIDIA Compatible Windows7 Display driver
Quicket
QuickTime
Synaptics Pointing Device Driver
TranscodingServiceSamhrutha,
I solved the problem.
I found that when creating a new user, no longer had the open with dialog box.
I started the process of resolution of a corrupted user profile (which seems little more than creating a new and copy and paste a few old values), when I decided to try one last thing.
I logged on my account corrupted again and when the 'Open with' dialog that I open the file with Notepad. I tried to "save under" to locate the file and found that it was located in C:\Users. Something in recent weeks seems to have put a file without an extension, called "Mathew" (my log in name) in this folder, and it began when I started windows.
I have since deleted the file and am no longer get the "Open with" dialog
Thanks for your support!
Carpet -
When you install the third age, gives a popup asking how you want to open it?
Original title: Third age download issue on Windows 8
When I try to download the Mod Third Age I save then run like some recommend it. The record fine and I run. It works well, then gives a popup asking me how you want to open. It gives me some options and gives me choice to get something out of the store, or search computer for application. I don't know what app to use to go to the configuration of the mod, or how to make this popup. If someone could tell me what app to use and how, it would be much appreciated. Thank you.
The file that you reference is not a configuration file, click SWTOR_setup file and check if it installs the game.
-
I bought a new MacBook Pro and you want to install my Adobe Design and Web Premium CS6. I have the serial number when I installed it on my old computer, but I can't understand how even once... ?
Downloads available:
- Suites and programs: CC 2014 | CC | CS6 | CS5.5 | CS5 | CS4 | CS3
- Acrobat: XI, X | 9,8 | 9 standard
- First Elements: 13 | 12 | 11, 10 | 9, 8, 7 win | 8 mac | 7 mac
- Photoshop Elements: 13 | 12 | 11, 10 | 9,8,7 win | 8 mac | 7 mac
- Lightroom: 5.7| 5 | 4 | 3
- Captivate: 8 | 7 | 6 | 5
- Contribute: CS5 | CS4, CS3
Download and installation help links Adobe
Help download and installation to Prodesigntools links can be found on the most linked pages. They are essential; especially steps 1, 2 and 3. If you click on a link that does not have these listed steps, open a second window by using the link to Lightroom 3 to see these "important Instructions".
-
Get the prompt: what program you want to open it with? When to open the web browser
When I try to open my browser (or any other program), he asks 'what program you want to open with' and gives me a list. What is with that? I have just got rid of "xp security 2012" if it means something... or am I...?
Hi Leoboutilieri,
have been closely following this:Otherwise, carefully followLet me know if it helpsElvis -
Hello. I so want to know if there is a way to keep the photos on icloud and get them deleted on your iphone, so that there is no problem of storage of the device.
iCloud is a synchronization system, not an external 'hard drive '. If you remove them on your device, they will remove icloud. To increase the available space, go settings/iCloud/Photos and select optimize iPhone/iPad storage. That will reduce the space required by 90% when it is fully effective.
-
do not open files in the Panel or when I open any file the message telling to choose the program you want to open this file
Hello
· What is the exact error message that you receive with the error code?
· What is the service pack installed on the computer?
· Do you remember all the recent changes on the computer before the show?
Follow the methods below:
Method 1:
Check the file association, you can see below the link for the steps for the same: how to change or choose the program that starts when you double-click a file in Windows XP: http://support.microsoft.com/kb/307859
Method 2:
Run the checker system files on the computer. Link, we can see: Description of Windows XP and Windows Server 2003 System File Checker (Sfc.exe): http://support.microsoft.com/kb/310747
Note that: if he asks you the service pack CD, follow these steps from the link: you are prompted to insert a Windows XP SP2 CD when you try to run the tool on a Windows XP SP2 computer system File Checker: http://support.microsoft.com/kb/900910 (valid for Service pack 3)
-
computer inheirerted of father and you want to restore the factory installed vista system but do not know the password of admin fathers
Hello
You should not have a password to reinstall Vista.
Microsoft prohibits any help given in these Forums for you help bypass or "crack" passwords lost or forgotten.
Here's information from Microsoft, explaining that the policy:
There are several methods to reinstall Vista.
There is no Windows Vista downloads available from Microsoft.
You can contact your computer manufacturer and ask them to send you a set of recovery disks.
They should do this for a small fee.
To reinstall Vista using their recovery disk/s, you start from the 1st recovery disk they provide and follow the manufacturer's instructions to reinstall:
You need to change the Boot order to make the DVD/CD drive 1st in the boot order:
How to change the Boot order in BIOS:
http://pcsupport.about.com/od/fixtheproblem/SS/bootorderchange.htm
And if you have never received a recovery disk when you bought your computer, there should be a recovery Partition on the hard drive to reinstall Vista on how you purchased your computer.
The recovery process can be started by pressing a particular combination of the key or keys at startup. (Power on / start)
Maybe it's F10, F11, Alt + F10, etc., depending on the manufacturer.
Ask them to the proper key sequence.
Some manufacturers have more available Vista recovery disks.
If this happens, you may need to try this instead:
You can also borrow and use a Microsoft Vista DVD, which contains the files for the different editions of Vista (Home Basic, Home Premium, Business and Ultimate) must be installed. The product key on your computer / Laptop box determines what Edition is installed.
Other manufacturers recovery DVDs are should not be used for this purpose.
And you need to know the version of 'bit' for Vista, as 32-bit and 64-bit editions come on different DVDs
Here's how to do a clean install of Vista using a DVD of Vista from Microsoft:
"How to do a clean install and configure with a full Version of Vista '
http://www.Vistax64.com/tutorials/117366-clean-install-full-version-Vista.html
And once the operating system is installed, go to your computer manufacturer's website and get the latest drivers for your particular model or laptop computer.
And phone Activation may be necessary when you use the above installation method.
"How to activate Vista normally and by Activation of the phone '
http://www.Vistax64.com/tutorials/84488-activate-Vista-phone.html
See you soon.
-
Original title: cannot save files
Hi I am unable to record any type of file. Save/open appears and it seems save (all be it very quickly), but when I look for it, he could not be found or I get a message telling me that the shortcut is not found. I tried a sfc scan, and it tells me that there is a problem in c:windows\Logs\CBS\CBS. Newspapers, but when I tried to look for these files I refused access. I use Vista and Explorer 8.
I hope someone can help x
You're right, it's too long to post here. I tried to send mine here. No go.
I only suggest:
1. use Windows Live Skydrive to transfer the cbs log. Then send us a link in the newspaper.
But apparently you don't have SkyDrive.SkyDrive is free and is part of the Windows Live products. Consider installing it.
Here is the link:http://explore.live.com/SkyDrive
2. I am a member in Vistax64 Forum. (Don't let the 64 not dissuade you. It does not the 64-bit mesn.)
http://www.Vistax64.com/#Vista-forumsI have no problem sticking my cbs newspaper there.
If you want to sign up and post the log for help.3. I am also a member Windows Client Tech Center. You can sign up and post there with the CBS.
Windows Vista IT Pro: Windows Vista Applications Forum.
http://social.technet.Microsoft.com/forums/en-us/itprovistaapps/threads
Maybe you are looking for
-
Adobe Flash Player works only with firefox
I downloaded the latest adobe flash player plugin, but it does not work with Firefox. It works on Internet Explorer.
-
Satellite A660 - battery discharge per day in shutdown/Hibernate implementation
I presented my Satellite A660 for troubleshooting, after that months of testing a battery discharged 5% / day in hibernation (4 + % / closing day). When the battery is removed from the laptop, there is no noticeable effluent. The discharge when the b
-
Atrix HD: Circles Widget crashes after update
My circle widget freezes and crashes after a period of time since the new update. I had not had this problem before. Is anyone else having the same problem? To fix it, I need to stop the process with the system board and the widget restarts.
-
[WRT400N] Multiple security log entries - every minute
I have several entries in the security log that I have no idea where they come from. They are all empty like this: Incorrect User login : Username is , Password is From 192.168.1.101=> Wed Mar 17 17:42:48 2010 Incorrect User login : Username is , Pas
-
Problem touch screen, X 200 Tablet with enchanced multitouch - No. TOUCH OFFERS all THE
Hello everyone, I just bought a Lenovo X 200 tablet with multitouch improved on November 13 when they were selling nice employee. I customized the 200 improved package multitouch X and added a whole bunch of features. I had the camera, turbo memory,