want to connect to hp JO 6800 via wifi to my laptop with a wifi router. is this possible?

Similar Questions

• I want to download the HTML code for an existing site, and then revise in Muse. Is this possible?

  I want to download the HTML code for an existing site, and then revise in Muse. Is this possible?

  An existing site HTML files can be reused in Muse as Muse only works with files having the extension as .muse.

  However, you use apps like Dreamweaver to edit your existing HTML files.

• I want to connect my number iMessage from my iPhone to my iPad. How can I do this?

  Be I want to connect to my number to my iPhone iMessage to use iMessage on my iPad how to do this?

  Both the iPad and the iPhone must be on the same Wi - Fi network connection and using the same ID to iCloud. When you're together, you should be able to see a setting on the iPhone in settings > Messages message text. Which lights up and you should see the iPad. Once that is set, you will be able to use the iPad for iMessage and your phone number. You can also use this TEXT message, if the iPhone is close to the iPad.

• Connection made stereo headset on USB 2.0 for laptop with windows 7Laptop

  I want to convert Audio cassettes to MP3 music. on my laptop. For this I connect headphone jack stereo 3.5 mm cassette player to female USB Port 2.0 for my laptop with windows 7. How do connect me it? What type of cable/connector/adapter, which does not exist in India that I use? Thank you

  You can use the audio only in the PC port to connect the audio output of the tape recorder (which is not controlled by amplifier). There is no possibility to connect the device to the USB port and start ripping the tape.

  However, there are a couple of tape recorders available on the market that is able to record the audio cassette USB storage that can then be copied to PC. An example can be found here:

  http://www.Philips.co.in/c/portable-audio/CD-Soundmachine-az1852_98/PRD/

• How do I share files via wifi router

  I have a question on the homegroup networking mechanism. My and one of my friends computer works via a wifi router. His office and it is wired through a router. But I can't find my friends computer on the network. The homegroup networking was was working completely fine while our connection was through the LAN. Can someone help me please how I can share files via the wifi router?

  Hi Tarik,

  Welcome to the Microsoft community.

  It seems that you need help to share files without wire. We're here to help.

  To share files via a Wi - Fi connection, I suggest you to refer to the article and see if it helps:

  Setting up a wireless network

  http://Windows.Microsoft.com/en-in/Windows7/setting-up-a-wireless-network

  If you encounter problems, you can check the link and try to solve the problems it:

  In Windows network connection issues

  http://support.Microsoft.com/kb/313242

  Alternatively, you can check the link for more information:

  Wireless network card: frequently asked questions

  http://Windows.Microsoft.com/en-in/Windows7/wireless-networking-frequently-asked-questions

  If you are always faced with the question, please answer and we will be happy to help you.

  Thank you.

• I want to buy Adobe Creative Cloud, but only for 6 or 7 months, not a year, is this possible and how? Thank you

  I am a student and I want adobe creative cloud for school, so I just want to pay for 6 or 7 months, is this possible or should I pay a year? Thank you

  Pricing plans and creative Cloud membership | Adobe Creative Cloud

  For the first 12 months (promotional price)

  Annual plan, paid monthly = US$ 20 x 12 months = $240

  7 months

  Annual plan, paid monthly = US$ 20 x 7 months + (5 x $20 x 50%) cancellation fee = $190.

  There is no plan of months-by-momth, cancel-all-time for student and teacher version.

• I want to activate my Acrobat 9 on a new Windows 7 laptop.  How can I do this?

  I want to activate my Acrobat 9 on a new Windows 7 laptop.  I don't want to upgrade to X or XI - I do not have the new features. How can I do this?

  Hi Treehouse1200,

  If you have the Setup program and the serial number of the product, you can install and activate it on your new machine.

  However, we recommend to use the compatible software on your machine.

  Also let me know if you get a specific error/warning message while activating the latter.

  Kind regards

  Anand

• Cannot share my connection to the local network via wifi

  I create an ad hoc network, and I'm not able to share with other computers or my nokia c3 phone. My phone does not detect the ad hoc network, I created

  Hello KarthikBN,

  You're other computers can connect to the Ad Hoc network you create on your primary computer?
  The connection works on your phone before, or is this the first time you are setting this up?
  If the computer detects the network but your phone is not, it is perhaps a question for Nokia:
  http://www.NokiaUSA.com/us-en/support/contact/

• V40 HP on office xp and is shared via the wireless network. laptop with windows 7 will not be printed on v40.

  Cannot print from laptop (windows 7) via the wireless router desktop (windows xp) with attached usb HP v40 .for all-in-one.

  (7) - wireless laptop router - desktop (xp) - usb - HPv40

  Has worked for laptop is running xp.

  Laptop of the coils of print job at the office and apparently complete, but the bureau simply ignores the print job.

  No error message.

  printing from office very well.

  I reported this as resolved. I submitted this problem. The problem started when the update of my laptop computer from Windows XP to Windows 7. When I did, the Lexmark printer to my desktop worked find with the new system of the laptop. The HP V40 has failed. The Office has just received each print job submitted from the laptop (via a local wireless network) and scrapped it. I could see the print job come in the V40 print queue and could disappear.

  Here's what I did to solve the problem:

  I tried a dozen or so combinations of withdrawal and installing the printer on my Windows 7 laptop and my Office Windowx XP (with the V40 attached via USB) and manually removing and installation of printer drivers on my desktop PC, it works finally. What have I done? I have no idea, but I think that deleting manually pilots v40 on the office was part of the solution. While view printers available on my XP desktop computer, I clicked on file and one of the tabs has led me to a place where I could remove the drivers for each printer (I just removed them for the V40).

  Here's what I DIDN'T DO:

  I'm not following the advice of the HP support person I contacted by phone. This Board had to reinstall Windows XP on my desktop. That clearly was not the problem when I talked to him. But he would NOT listen to reason. Luckily I have enough knowledge to know PC than its low of false tips

  I am pleased with the resultant availability of the V40 again.

  I have no idea how to officially close this problem.

  I would be happy to discuss with someone else who has a similar problem, but when I submitted this problem with my name and email address, the moderator has deleted my presentation of the problem. Therefore, I think that all those who want to know more is out of luck.

• Currently, I have Acrobat XI, but am ready to upgrade if my problem can be solved. I want to be able to say that a PDF file can be printed only ONCE. Is this possible.

  Currently, I have Acrobat XI, but am ready to upgrade if my problem can be solved. I want to be able to say that a PDF file can be printed only ONCE.

  I create and sell books. Asked me to create and sell PDFs of books. While it is easy, if I sell a PDF, there is nothing which could prevent the company to send the PDF autour and everyone by printing.

  So, I'm looking for a solution to this problem.

  Hoping that there is a solution.

  The upgrade will not help. No version of Acrobat can do that.

  The only way this is possible (and I'm still not 100% sure on this subject) is using DRM technology, which is very expensive.

• I want to vary the speed of a 12v dc fan using a mosfet with a DAQ 6008.Is this possible.

  I am a college project that is to use a data acquisition to monitor and control the temperature. I use a LM35 temperature sensor. I need to control the speed of the fan a12v dc. I use an external power supply of dc 12. I hope to control the fan speed by varying the voltage of 5v to the door of the

  MOSFET. Is this possible.

  Hi shaggydog.

  You can use one of the channels of analog output of the USB-6008 output a variable voltage to the gate MOSFET, this should provide the features you need.

• using printer hp 4620 fax via wifi

  Hello

  I just bought printer hp officejet 4620 laptop, can I print using wifi, but I can't receive fax, maybe that I've not implemented correctly

  I want to receive faxes via wifi: how is this possible? the installation guide only shows the ways using cable

  my provider is fastweb and I can't undestdand how to connect the printer to the modem using the cables

  PS: Sorry for my bad English but I'm Italian

  Hi keep2,

  Your English is much better than my Italian.  In order to send and receive faxes, you will need to have a cable 2 son connected to a phone jack.  Looks like you have a digital phone line and that can cause problems with faxing at times.

  You will probably need a filter if your Internet provider and phone is the same.  You can probably plug the fax phone delivered with the printer into the phone jack where you have your phone on and send and receive faxes.  The phone can be connected to the Ext port on the printer.

  If you configure printer as explained to you and still have problems, you can run a Test Fax.  On the printer, press the button that has an image of a "key", select Toolsand then select run fax Test.  Everything must go.  Let me know how it goes.  I'll be happy to help you if you are still having problems.

  Good luck!

• Cannot DRC windows 2012 via wifi

  Hello

  I have problems connecting DRC to windows 2012 via wifi.

  My windows 2012 is set up in my network using cable and hub, while my laptop is also on the network connected via wifi. DNS and internet work fine, but every time I tried to connect to windows in 2012 using wireless (DRC or domain join) do not work.

  I tried to use cables and it works beautifully... seems that windows 2012 do not accept the connection of clients connected wireless...

  Help...

  Thank you

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• I have moved to another country and you want to buy and use my original store movies. Is this possible?

  I am a teacher and have moved to Europe and want to buy and use movies on my original Australian iTunes store for my classes. Is this possible? Thanks for any help.

  No, you can use the store for the country where you are now (part of the terms of the store is having to be in a country to use his shop). If the movies are not available in your new country store you can try to contact the film studio/holder of rights and ask them to license to Apple to sell it

• I want cRIO to start and stop the acquisition by push physical button on the cRIO, is this possible?

  When you use my cRIO 9024 on the ground, I prefer to be able to start and stop the acquisition with pressing a physical button on cRIO.

  I want to say I don't want it to be "as a start-up," I don't want cRIO to start the acquisition as soon as the power supply is ensured.

  Is this possible?

  Hi Cashany,

  you will surely find this switch status. But there are easier ways (but more expensive) for a button. Fiddling with a pen or a small screwdriver to switch USER1 is not what I call "user friendly"...

  -You have at least 2 voltage inputs on your module available. Use a switch voltage on the power inputs. Use a 'real' button!

  -You have an available serial port. You can set some pins on GND or voltage and check their status inside the cRIO/RT target...