Want to m6-1205dx: must press space or HP Splash Screen hangs it indefinitely

Similar Questions

• Must press paper to get the printer working properly

  Printing problems...

  When we print from any computer on our P2035N printer must press the paper button so that it can work. Also, it will not print page 3 of one of our computers, he jumps just this page.  We have replaced with a new printer... even one and it has the same problem.

  Ask technical questions in the forum Feedback is useless, so I moved your post to the windows 'Hardware and drivers' forum.  Always include your version of Windows when you post.

  Messages displayed on the front panel of the printer?  This looks to me to an incompatibility between the paper type settings in the driver and the default type of paper in the printer and the printer is waiting for the type of paper correwct to load.  You say by pressing the button on the printer, the printer to use whatever paper is already loaded.  It could also be a mismatch of paper tray, with the pilot, indicating the printer to use a Board that is not loaded, or which does not match the default tray set in the printer.

• My local dick V total space is 20 GB, I want to make my C drive space like 60 GB without Booting up or formatting

  Hello. I have windows 7 Ultimate. My hard dick is 160 GB. My local dick V total space is 20 GB, Local D 70 GB drive and dick Locak E 60 GB. Drive C is now totally complete. I want to make my C drive space like 60 GB without Booting up or formatting... I can do... ? Please help me out

  Hello. I have windows 7 Ultimate. My hard dick is 160 GB. My local dick V total space is 20 GB, Local D 70 GB drive and dick Locak E 60 GB. Drive C is now totally complete. I want to make my C drive space like 60 GB without Booting up or formatting... I can do... ? Please help me out

  That's how

  http://www.pcandtablet.com/Windows-7-General-Chat/217/in-my-Windows-7-Desktop-Windows-7-is-running-out-of-space-how-can-i-handle-this.html#post403

  on the other

  http://www.pcandtablet.com/Windows-7-General-Chat/236/although-i-have-enough-UN-partitioned-space-extend-volume-option-is-not-activated.html

• "No more space on the home screen"

  Two of my home screens have a lot of vacation, but now when I try to place a Widget on one of them I get the error message 'No more space on the home screen'.  It used to work fine - but now I press on and hold on an empty spot on the screen and select 'Widget', but I get this error message when I select the Widget I want on my screen. I can place a folder or shortcut without problem, just can't place a Widget.  Any suggestions?

  Widgets done come n a variety of sizes. Sometimes the size appears after the name of the widget (4 x 1, 4 x 2, etc.). I think that the FB widget is big enough, maybe 4 x 3 or 4 x 4. He needs a little space.

• A Message in a rectangular box "Messages Agent wants to use the 'Local products' kenchain. appearing on the screen and ask for Keychain password password.  This started after I changed the password of Apple resulting for the purchase of a new iPhone

  A Message in the box 1. "Message agent wants to use the 'Local products' kenchain. "is appearing on the screen and ask for Keychain password password.  This started after I changed the password of Apple resulting for the purchase of a new iPhone.

  My iPhone 5 has been damaged and the screen was not visible.  As a result, I couldn't open the iPhone.  I bought 5 s iPhone and when I got to connect with the iCloud

  I remember the answers to security questions.   The seller must change the password and enter new answers to security questions, I did.  This happened in Bangalore.  When I'm home in Ernakulam, Kochi (India), where I has the Air of Mac, Ipad and my wife had another iPhone and laptop computer Dell, these problems began to come up on the screen and blocks the screen.

  Four Messages are appearing: the first is on the top.

  Other messages are:

  2. ' cloudd wants to use the kenchain 'local products '. '

  appearing on the screen and ask for Keychain password password.

  3. ' com.apple.iCloudHelper.xpc wants to use the kenchain 'local products '. appearing on the screen and ask for Keychain password password.

  4. ' cloudpaired wants to use the kenchain 'local products '. ' is appearing on the screen and ask for Keychain password password.

  It of an upheaval and please suggest how to solve this problem

  Hello remy!

  I see that you are either prompted by iCloud Keychain with various alert messages.  I know it's important to have iCloud Keychain works correctly and I am pleased to offer you an article that should help you.  Please follow the instructions in the following support article:

  If your Mac keeps asking for the password in the keychain

  Thank you for using communities of Apple Support.

  See you soon!

• Unable to load the splash screen Startup Manager (by pressing F12 either does nothing or freezes the screen)

  Search on Google for a few days now, seems to be a rare problem I have found only ONE thread referring to a problem like this

  Problem:
  Boot Manager does not load
  Case 1: Start (with Toshiba logo) screen-> I press F12 for the Boot Manager. Nothing happens, and initialize routinely at the login screen, as if nothing had happened.
  Case 2: Splash screen-> in the crazy frustration I spam the button F12. The computer remains frozen in the home screen for hours otherwise force-closing
  Case 3: (this can be linked) by pressing the button F3/F8 works, but only if I wait 5 seconds. If I press immediately after starting the computer, the screen freezes again and remains frozen. In addition, it will NOT display the live cd USB drives / bootable, that I plugged in; o

  Details:
  I have Vista Home Edition 32-bit
  I've never reinstalled it, and I want to keep avoiding a complete reinstall if it isn't necessary because most of the problems can be resolved without having to reinstall and it's a pain in the _ to save everything, save parameter files and all that.
  A virus that could cause this would probably be beyond the capabilities of Avast, but always I ran a scan with Avast antivirus full (and own)

  If anyone has any suggestions please email me at vrielis@gmail (no matter how old this post is!) I'm getting desperate. o I also check here regularly, but I would prefer email

  Hello

  Reinstall would be a waste of time because, as I already pointed out, the problem is not in the operating system. It has everything to do with how Toshiba implements access to their volume of recovery and absolutely nothing to do with the operating system. Your best chance of resolution is the manufacturer. If you take this route or not is your choice. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

• Want the content to remain at the bottom of the screen, regardless of the resolution of the screen

  On my site, I have my contact information in a bar, and I want the contact bar must remain fixed at the bottom of the screen. When I test the site at different screen resolutions, sometimes the contact bar is no longer there. How can I make sure that the contact bar stays relatively where I want it, regardless of the screen resolution?

  What you are trying to achieve will not work within the Muse, changing the display screen resolutions will not affect the browser window size and position, how to make sensitive sites.

  Don't forget about the screen resolution is your file size upwards or downwards (zoom upwards or downwards) based on the settings of your start page. So if find you something to 1000 pixels high, that's where it will always be regardless of the resolution of your screen, Muse has no way of calculating where to place an image if you change the resolution, it's zoom the screen upward or downwards and not the data.

• HBO GO - Press ESC to exit full screen

  Version of flash player 11.0.1.152 executed in Internet Explorer 9 on Windows 7.

  With the help of HBO GO I see the message "Press ESC to exit full screen" when I go fullscreen mode and the message does not fade.

  The result is that it is difficult to watch the video.

  Does anyone know if there are support HBO forums?  I ask because the information I've found tells me to report the problem my provider (DIRECTV) and they are clueless.

  I don't know if they have a forum or not, but I could not find official forum by searching all around. I found this info and you can check your environment:

  http://www.hbogo.com/?camp=GoG5&tracking_ID=13670&K_CLICKID=790ef2b7-B9B4-05e8-f3a5-00005b 4f1fcb #help.

  (copy by top of the site)

  "(Vous pouvez accéder à HBO GO à l'aide deles de navigateurs suivants: 1) for Windows: Internet Explorer 6.0 or later (NOTE: Internet Explorer 9.0 with a 64-bit version of Windows is not currently supported), Mozilla Firefox 2.0 or higher, or Google Chrome 3.0 or higher." (2) for Mac OS x: Safari 3.0 or higher, Mozilla Firefox 2.0 or higher or Google Chrome 6.0 or higher. »

  You can check FireFox and Chrome how they work.

  Hitomi

• CRNT open anything without right click logoff crnt must press the space bar to click on logoff

  CRNT open anything on the desktop or journal by clicking the mouse, I have to press tab to get it on the sign out button, then press the space bar

  Hi maxinew,

  1. don't you make changes before the show?
  2. What is the brand and model of mouse?

  Try these steps and check the result.
  Step 1: Check your desktop configuration
  a. double click on my computer.
  b. on the Tools menu, click Folder Options.
  c. under the general tab, make sure that double-click to open an item (single-click to select) is selected.
  d. click on apply to save your changes to settings.
  e. click ok and close the computer window.
  f. check if the problem persists.

  Step 2: Reset the buttons of the mouse on their values
  a. Click Start, point to settings and then click Control Panel.
  b. double-click mouse.
  c. on the tab buttons, click default settings. If the problem is only with a specific program, click on the settings button, and choose this program and then click default settings.
  Note: If the default settings is not available, all your work button is already defined for the default mode.
  d. click OK and check the result.

  See the problems with the mouse button or scroll the parameters

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Hand/zoom tool of Photoshop appears not to when you press space/command - need help to restore...

  Lately, I've lost my hand tool in Photoshop, while the editing tool remains on what is selected in tools, for example, I'll select the pen tool and while working normally I'll press the space bar which is what I used to get the tool to hand over the past 30 years, but now nothing, the tool remains the same and I have to physically move the cursor on the hand tool in the tool palette to get the hand tool. This slowed my productivity considerably. I looked in preferences, but everything seems normal, zoom brush is selected which is what I would get with selection space more order, but now even that does not work... I must go back to the tools palette and select the zoom tool, or use the 'Z' shortcut for the zoom tool. Let's just say my keyboard shortcuts when working do not work, the shortcuts to the tool as 'Z' and 'P' or ' work to get the tools, but it's not ideal. Someone has an idea of what happened or how it can be restored to normal? Latest version of Photoshop 2015 Creative Cloud edition.

  Hi Ken,

  It might be possible that there is another program running in the background that use the same keyboard shortcuts.

  Would you suggest to close all other running applications (except Photoshop) and then check if it works.

  Refer to this article: keyboard shortcuts stop working in Photoshop

  Kind regards

  Claes

• Why can't I minimizes exceeding 2 Notepad in FF? I used to be able to minimize the notebooks as much as I wanted to. FF must have made an update and now I can't do that. Is there a setting I can change that will allow me to do?

  1. Question

  Why can't I minimizes exceeding 2 Notepad in FF? I used to be able to minimize the notebooks as much as I wanted to. When I search on a topic I keep several notebook open until I finished. FF must have made an update and now I can't do that. Is there a setting I can change that will allow me to do it again?

  Also at this time, the length of the sentence, I type has changed.
  There is no limit for how far she can extend to the right.

  Help, please. I'm not very irritable and don't understand Computerese.
  Please explain in English every day.
  Thanks in advance,

  bouquet

  Bouquet,

  Great to hear that your problem is finally solved.

  Regarding 2nd query you have raised, it is not possible to have the program running if you turn OFF the computer (it's like saying you want the bulb to keep bright despite off). When stop you the machine, you turn off the power... so there is no way that the current state maintained. When start the computer again the next time it starts on new.

  But there are 2 options that can help you with your problem: -.

  1 SAVE your changes before you close the program, and choose next time when you start the computer

     File ->Open (This way your work is preserved and you need not start afresh next time onwards)
  

  2. instead of turning off the computer, choose to Hibernate. When Hibernate you (and NOT CLOSE) the current state is preserved. This means that if you leave the notebook running he will remain in the same State when you next start your computer the next time.

  PS: as this forum is for the FF to discuss related issues, I propose that for further assistance e-mail me at my personal mail ID [email protected]' rather than discuss it here on this forum

  Now your problem is solved with kindness mark this as closed discussion (marking/choice of appropriate solution helped you)

• New to the Photoshop CC application. Want to set up my work space and can not find a way to do it. Suggestions/advice?

  How can I set up my work space?

  How can I create to-DOS? (just like previous versions of the PS?)

  I assume that you want to place some signs along the right edge. If this is the case choose window and check the panels you want to display. You can adjust their width and position. Most useful: when you are satisfied with the arrangement of the Panel, choose window > workspace > new workspace and save it. If, at any time, things move around you can set things right by choosing window > workspace > Reset [workspace name]

• Release of VMware (CTL + ALT) key must press twice

  Hello

  I'm the first time using VMWARE + Ubuntu (host) combination. I see the strange problem by posting comments in the comments to the host:

  I use by default, release the keys CTRL + ALT.

  Whenever I am in guest and want to come host (I speak of my input devices) I use CTRL + ALT, but after that my click does not work on all places... .to operate on all the places I need to press the combination again. This means that it is not my default release key CTL + ALT. .it is CTL + ALT (1st time) CTL + ALT (2nd time)...

  I need to press CTRL + ALT twice to make completely free.

  The places where my CTL + ALT (once) works are only Ubuntu launcher and taskbar.

  I tried to google this problem... but I have strength to find the entire discussion on this. That's why I decided to come here. \

  What could be the problem and the solution of it?

  CTRL + ALT is not a good choice for a Linux host - so before fight with this test the combination of keys to use one that is not incompatible with combinations of native Linux.
  Examples CTRL + WIN or SHIFT + WIN

• Error 'Strange Situation' in AE CC 2014 (just improved) made me lose a whole day of work effects. Very angry, and I want some answers. Must be delivered tomorrow. (Error 939524096)

  Here is my file. Seems to be corrupt. No automatic record was made eventhough that AE is set to record a. Seemed to be happening in the middle of things, while I pass first CC 2014 after effects CC 2014 (dynamic linking). Worked perfectly well, until by chance, the program crashed and Dynamic Link in first lost access to the more than FIFTY COMPOSITIONS I had worked.

  http://s000.tinyupload.com/index.php?file_id=21188265255943283011

  I don't want to be cruel here, but you have lost a customer because you did not have a safe and efficient workflow implemented. I never do anything without saving files in versions 10-20 minutes. If your files are get damaged whenever save you them, then you have to analyze your project and to understand what you do which causes corruption. Working for 10 or 15 minutes, save the file, open the file, save it with a different version and start over when you encounter problems. This is the most important part of the business advice I can give you. As soon as you have any indication that there may be something wrong, contact your customer. Don't make excuses, don't blame the software, take full responsibility and just explain that you need more time or something in the project must change. I've never had a client refuses to give me some latitude or refuse to make adjustments to the project that would be completed in time.

• Help wanted | How to increase virtual disk space

  IM using ubuntu as my client machine and esxi 4.1 running on the server dell 2850. My image is initially sized like 15 GB, but I want to expand to 100 GB, which is the amount available in the actual physical drives attached to the server.

  If I try to change the disk space by changing the settings it does not change the internal space used by ubuntu. ?

  Can someone help me how can I change the settings for the virtual disk grows as the capacity of the physical drives increases?

  Thank you

  If you originally created a thin provisioned disk then it will behave as you describe, but you still need to expand the space inside your file of Ubuntu system using gparted. Download the live CD of gparted.