Want TO TS15j021 when an external monitor connect through HDMI is NO sound through speakers.

Similar Questions

• HP laptop - 15-f233wm: external monitor connected to the HDMI port has video but NO sound

  If I connect an external monitor to the HDMI port and check my audio device on the right on the screen cone winder it displays 2 only) 1 HP and Intel) 2 Audio display speakers and No HDMI option selection.

  Ernie4576 wrote:
  

  If I connect an external monitor to the HDMI port and check my audio device on the right on the screen cone winder it displays 2 only) 1 HP and Intel) 2 Audio display speakers and No HDMI option selection.

  By adopting the option monitor MHDI PC/AV Pc mode will solve the problem, I use a unit screen color Samsung TYPE model / MODEL: C27F591FD (N).

  The device playback option on the care of the portable property are all set to default, Intel C27f591 display sound card works fine!

• Screen resolutions possible for external monitors connected to a T60 with ATI Radeon X 1300

  Hello

  at home, I have my Thinkpad T60 with ATI Radeon X 1300 graphics running in a docking station with an external monitor connected to the DVI. I plan to buy a new screen and I wonder who will take care of screen resolutions of my system. My favorite among the possible new monitors have a native resolution of 1680 x 1050 pixels. The ATI chipset will support this setting?

  A big thank you to anyone who displays some tips

  Georg

  It supports dvi up to 1920 x 1200 resolution.

• Compaq presario cq42 screen becomes black when the external monitor is unplugged

  Compaq presario cq42-137tu running windows 7 32 bit.

  I've been using a connected external display on the vga port and now every time I disconnect the monitor and restart the laptop the laptop LCD screen will display the original message of compaq and the black windows boot screen with the logo but then turns off. If I reconnect the extrnal monitor it will work fine (even if the external monitor is turned off)

  The screen of the laptop works fine without the external monitor connected in safe mode.

  I used both the HP support and the setting in the display panel to select single monitor and set the display on the screen of the laptop, but every time that the external monitor is not connected the screen turns off. The external screen does not need to be turned on, just to connect to the laptop monitor work. I also tried to download the graphics driver and put it back.

  If your laptop is a ComPaq base model then there is the (built-in) Intel UMA / GMA 4500 M - GL40 chipset with video memory sharing and you should consider downloading and installing the driver Intel graphics high definition (HD).

• No sound on external display connected by HDMI win7 premium 64-bit running Notepad

  Previously on vista I had no problem. its available on external monitor connected HDMI
  Cannot find any control in win 7 to switch on the sound computer monitor HDMI

  Hello rbh111,

  Thank you for visiting the Microsoft answers Site.

  To better help, what is the brand and model of your PC?

  Also, try clicking on Show disconnected devices and see the disabled devices under the noise>reading tab and make sure that output HDMI device option.

  If the HDMI option is not listed, you can check that the last audio device driver Windows 7 and Windows 7 video card driver provided by the manufacturer of the PC are installed and then check the issue.

  Please let us know if the steps above help you to solve the problem for you.

  Thank you

  Mary
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• N5110 display not working, but when the external monitor is connected to come

  My screen does not work and I often hear 8 beeps at startup which indicate a problem with lcd display. But if I connect an external monitor, the LCD lights up also and then I can disconnect the external follow and work with my built-in screen. If I turned off or in hibernation etc the same problem occurs.

  Hi rndb_v,

  LCD screen could be about to fail, or it could be a cable problem. I suggest you try reseating the LCD cable. You can find the manuals here http://dell.to/1n5lDxb

• External monitor connected to the Dynadock does not work

  I just bought a docking station universal toshiba dynadock via amazon.com (latest version). I plugged on an Acer Aspire 5738zg computer laptop, Windows 7, 64 bit.
  Everything works great - except for my external monitor (6 months old packard bell viseo 190w, 18.5 inches, max resolution 1366 x 768 at 60 Hz)

  The dynadock manual says connect with monitor dynadock station via a vga cable - what I've done. Job monitor is completely black. The manual says then click the icon in the field of system status / tray (do not know what the word - the small icons at the bottom of the screen on the right screenfor side which) to configure the dynadock to be extended or mirror mode.

  Problem is that the icon does not exist. I have the icon for the audio part of the dynadock and icon for the system whole dynadock (icon called "toshiba dynadock tool" - here I can release the docking for example, but do not do anything on video/screen).

  I checked and the video/screen the dynadock element was installed togheter with everything - the installation was complete and successful. Still no icon if...
  I'm not watching videos or games, just be able to use my external when monitor I surfing online and you use microsoft word etc. - no data transfer gigantic so far as I can tell.

  How to solve this? Via the control panel of my laptop? How...? :-)

  I'd appreciate some advice that I am completely lost as to how to solve this problem (tips preference in the form of a very easy step by step 'manual' as I'm absolutely not an expert in computer science, just a regular user).

  Hi nanna.

  I think that the best way to solve this problem is to download and install the latest graphics driver for the dynadock.
  So please, use this link, download and install the driver.
  http://www.DisplayLink.com/support/downloads.php

  If the external display doesn´t not working after installing the driver, please do a right mouse click on desktop and verify the "screen resolution".
  You should see 2 screens.
  If this is not the case - there is an error during the installation of the utility dynadock.

  In this case, please visit the toshiba page
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp and download the latest dynadock utility.

  Please chosse: Options - connectivity - Docks & replicators - Dynadock

  You will find the version 2.4.0.13

  hope this will help you!

  Best regards

• Satellite L40 - BIOS - the external monitor connection preferences

  Hello!
  I have some problems with the external monitor (CRT) connection for laptop L40 - 17O (PSL4CE).
  Matrix on it is broken. There is no windows installed.
  I connect external monitor, but I don't see anything. I heard that it is necessary to change something in the BIOS, but it's hard to do that without image =)
  Would be great if someone who has the same note would say what button to press to enter the BIOS and change the options in this way. Or perhaps someone could take a snapshot of the bios and its options.
  I'm looking forward to see answers)

  Normally it should be an option in the BIOS where you can choose, if it isn't the internal LCD screen, or both or is automatically activated after connecting a display to the machine.

  Under Windows, the combination FN + F5 does exactly what you need: it goes from the screen.

  Could you please check your BIOS and attention to the options in the form? I guess that basic finding. :)

  Welcome them

• Aero off when the external monitor is turned by Nvidia ControlPanel

  Please see subject
  Aero works perfectly when the office is developed for the 2nd monitor in normal mode.
  no work around?

  Post edited by: mhoffmann

  Sorry, I forgot to mention my hw: Satellite a100-02 b (geforce go 7600)

  .. and when I reboot Vista behaves a little bit strange.
  a few seconds, everything looks ok, but then it redefines the external monitor to 16-bit color and minimum Vfrequency (60 HZ)
  and a message appears that the 'Desktop Manager' was closed due to a problem.

  Maybe it's because...
  (1) it is an old CRT, not especially known (standard pnp driver)?
  (2) the ability of the graphics card vista is not sufficient in this configuration?

  I heard somewhere that there is a switch in the registry, which disables the dwm.exe test, if the material is
  able to support the aero technologies. What is a way to fix it?

  Hello

  I read about the registry hack that allows the function Aero Vista on graphics cards that are generally not able to manage the Aero feature.
  But I don t think that the modified registry key might help with this problem!

  In any case, I try to understand what you were doing on the laptop
  You have turned on the display on the second external monitor, then you have changed the position of the screen (you turn the display) and you tried to use the Aero on the external monitor.
  Am I wrong?

  Well, what to say, it s not easy to say if she s a problem or just a limitation of Vista Aero.
  I have never tested or used Aero after the display has been set at another position.

  I think you should test Aero on external monitor without rotation.
  Please also see this Toshiba knowledge base article on

  What are the requirements of Aero in Windows Vista?
  http://support.toshiba-tro.de/KB0/TSB7101O90002R01.htm

• Windows 7 Home Premium does not start and an external monitor connected via DVI to HDMI Cable

  I have a Dell Inspiron 531 desktop computer with a NVIDEA GeForce 8400 GS video card.  This video card has the following outputs: DVI, VGA and S-video.  When I connect it to my computer via the VGA port to PC to my Sony Bravia KDL-40XBR4 monitor port, the machine starts perfectly.  If I connect via a HDMI cable to one of the HDMI monitor DVI ports, the screen displays the video BIOS, but turns black when the operating system begins to load.  If I connect another monitor to the VGA port, yet once the machine boots fine, but if I connect the monitor to the computer and the Sony Bravia, once again the machine does not start.  The strange thing is that if I boot with only the connected computer screen and then plug the DVI to HDMI cable, then Windows 7 sees the Sony Bravia monitor very well, and I can extend the desktop.  If the machine mode 'sleep', both monitors work very well to wake up the PC.  So, if the Sony Bravia is connected alone or with the computer screen, the machine does not start (the screen will display 'go black' when the OS starts to load.)  I tried to run Windows in Mode safe, but he won't either.  I have all the updates of Windows applied and have installed the latest drivers from nVidea so.

  Hey Chris,

  First of all, about climbing, is not a technical support; This is a community forum where MS moderator and contributors are involved.  Now to your question ~

  It's very strange that the PC does not start when this unit is connected, but works fine when connected after the fact.  I've seen several cases where a hardware configuration of uinsusal will prevent a PC to boot.  I think that the culprit may be DVI to HDMI Cable that you are using.  If I were you, I try to connect the PC to a DVI monitor and see if it boots normally.  Also, see if the monitor can prevent another PC to start when it is connected directly via the HDMI.

  Good luck! Let us know how it turns out.

• How to set 1280 x 800 on external monitor connected to the Tecra M2V by APR3?

  Hello

  I have a Tecra M2v (with intel Extreme Graphics 2) and recently got an Advanced Port Replicator III and a 15.4 "WXGA LCD display. According to the specifications of the laptop (LINK to DL the PDF specsheet) it will support an external monitor with a resolution of 1280 x 800, but I don't know how to operate. The only resolutions that I can find are for 1024 x 768 or 1280 x 1024.

  I installed the latest version of the bios (v 1.30) and have tried different drivers of intel and can not get the wide screen resolutions to appear. Does anyone have any ideas on how I can get this to work?

  Hello Randy

  Are you sure that your external LCD can manage with a resolution of 1280 x 800? You attempted to set this resolution without Advanced Port Replicator III?

• Monitor connected via HDMI to VGA connector does not

  My Pavilion p6598uk has an ATI Radeon HD5450 with a DVI and HDMI output. I have a monitor connected to the DVI output via a VGA Converter thing, it works very well. I am trying to connect a second display on the HDMI output using HDMI cable to VGA. This does not at all. It is an OLD monitor (10 years) but works ok if I plug it into the DVI/VGA Converter.

  Monitor just says no: «No sighnal video» I tried 2 different cables and my drivers are up to date.

  Is it possible to connect an old (not HD) monitor to the HDMI output? If so, what am I doing wrong? Would this work if I bought a new HD TV to use as a monitor?

  Windows 7 64 bit

  All solutions gratefully received.

  You cannot convert HDMI to VGA without some serious gear digital analog conversion. You cannot use a device simple passthough like you can do with a DVI-I/VGA cable adapter. You will need to use an HDMI cable and a monitor that has a HDMI or DVI - I/D connector.

• 2014 MBP crashes when the external drive connected

  • MBP 2014 15 "El Capitan running.
  • Connected crush 3 TB Seagate GoFlex Desktop drive.
  • When I connect, drive starts, is recognized by Finder but the system locks and then hangs and then almost immediately.
  • Was OK until I tried to transfer a large file of MPB to drive recently, but now accidents as described above on each connection attempt.
  • (From startup using CMD - R) disk utility reports the MBP and external drive are good.
  • I have the system event log recent accident this morning if it helps (if need to tips on what part of the content to send).

  Thank you!

  These must be run as administrator. If you have only one user account, you are the administrator.

  Run the Console application in one of the following ways:

  ☞ Enter the first letters of his name in a Spotlight search. Select from the results (it should be at the top).

  ☞ In the Finder, select go utilities ▹ of menu bar or press the combination of keys shift-command-U. The application is in the folder that opens.

  ☞ Open LaunchPad and start typing the name.

  In the Console window, select

  DIAGNOSIS AND diagnostic USE information reports ▹ System

  (not diagnose them and use Messages) in the list of logs on the left. If you don't see this list, select

  List of newspapers seen ▹ display

  in the menu bar.

  There is a disclosure triangle to the left of the list item. If the triangle is pointing to the right, click it so that it points downwards. You will see a list of reports. A report of panic has a name that begins with "Kernel" and ends with ".panic." Select the most recent. The content of the report is displayed at right. Allows you to copy and paste to validate all of the content, text, not a screenshot.

  If you don't see any report, but you know, there was a panic, you have chosen diagnostic and using the list of Log Messages. INFORMATION on the USE of DIAGNOSTIC AND choose instead.

  In the interest of privacy, I suggest that, before posting, you change the UUID ' anonymous, ' a long string of letters, numbers and dashes in the header of the report, if it is present (it cannot be). "

  Please do not post other types of diagnostic report.

  I know that the report is long, perhaps several hundred lines. Please report all this anyway.

  When you post the report, an error message may appear on the web page: "you have included content in your post that is not allowed", or "the message contains invalid characters." It's a bug in the forum software. Thanks for posting the text on Pastebin, then post here a link to the page you created.

  If you have an account on Pastebin, please do not select private in exposure menu to paste on the page, because no one else that you will be able to see it.

• I am able to connect to the internet with internet explorer, but when I try to connect through mozilla firefox it says "it is impossible to establish a connection with the server." why? "

  I can establish an internet connection via internet explore using a router at home, but whenever I try to connect using firefox, it said that it is impossible to connect.

  One possible cause is security software (firewall) that blocks or limits Firefox without you informing on this subject, possibly after the detection of changes (update) for the Firefox program.

  Delete all rules for Firefox in the list of permissions in the firewall and leave your firewall again ask permission to get full unlimited access to the internet for Firefox and the plugin-container.

  See Server not found - the problems of connection and Configure the firewall so that Firefox can access the Internet and http://kb.mozillazine.org/Firewalls

• Problem with sound when Aspire 5750 G connected via HDMI

  Hello

  I'm having a problem connecting my Aspire 5750 G to my TV through my HDMI cable. Previously, I've always been able to go in manage Audio devices to choose the HDMI option, but today this option disappeared. Nothing has changed with my TV or my cable and all my video and audio drivers are up to date. Is there another way to solve this problem?

  India

  Hello

  Check if the HDMI Audio is listed in Control Panel.

  Click Start ==> Panel ==> Sound ==> Playbacktab Select. If HDMI Audio is listed here, make sure that the green check mark is listed. If not, just click on any space and select show disabled or disconnected devices. Then right-click on the HDMI Audio and select as a default device.

  Thank you best regards n

  Rakesh