Email provider does not recognize the email address after entering different credentials

Similar Questions

• Tecra M1 does not recognize the DVD drive after replacement

  I am trying to install a new drive CD-RW/DVD-RW on a Tecra M1; However, when the computer does not recognize the drive.

  Is there a solution to this?

  Thank you

  Colin

  For me it s case.
  I would say that the BIOS can't handle the new player properly because of the wrong master/slave/c-salt settings
  Readers slim for computers laptops support setting master/slave/c-salt settings and these settings can only be changed by changing the rider as on desktop drives.
  So it is very important that you purchase a compatible player and supported because disks with incorrect settings will not work.

  Before buying a car, you should ask the service provider to Toshiba for a caught player supported and compatible

• WAP54g does not recognize the IP address of my laptop with active Mac filtering

  I have reset my factory default WAP54g v3.05 to allow access to the older computer to my network.

  Now, I reinstalled for better security using my new laptop: no SSID broadcast and WPA2-Personal encryption. However, when I activate the Mac filtering and allow my laptop more recent, the WAP54g does not recognize.

  Disable Mac filtering and my laptop is back on the network.

  Any suggestions to solve this problem would be appreciated.

  Make sure that the MAC address of the wireless network adapter in the MAC address filtering tab. To get the MAC address of the wireless network card. Click on start-> Go to run-> type-> CMD-> Hit Enter type ipconfig/all

  This will give a show you the MAC address for adapter ethernet and a wireless adapter. You must select one for the wireless network adapter.

• S5-1060 casing dvd player does not recognize the Bluray disks after you restore windows 7

  I have a s5-1060 casing with a HP DH12E3LH bluray player, recently the computer was so I took out the restore disks and just do a fresh install of windows 7, it works fine now, BUT the only thing I can't understand is why my bluray in unity player not to see, recognize or play blurays now.

  The Device Manager shows the best drivers are already installed (21/06/2006 microsoft 6.1.7601.17514 driver), and he will play CD, DVD, just does not recognize a bluray disc.  I might say, we watched top of 25-30 movies on it so I 'hope' is not burned or something altogether.

  It indicates that the device is working properly in Device Manager he calls it a cdrom drive (not sure if it matters), but with a bluray in the drive, it shows under properties / status / no media in the drive.

  I'm not really sure where to start on this, drivers seem strange to be so old, is it a firmware I can update if so where can I get that info, I went to the hp site let it detect the computer saw the driver updated but nothing which was directly related to the cdrom drive.

  Thanks for any help on this just stumped at this point, as it was working before the full restoration to the computer using the recovery disks, then there must be something simple.

  Hello FTLOSM,.

  I understand that after making your computer your Blu - ray discs won't play in Windows 7. I'm you provide a document from HP support: solve the DVD and Blu-ray movie problems (Windows 7) that will guide you through the troubleshooting steps to resolve this problem. I would focus on the topic impossible to watch movies in Blu-ray 3D. I am also you provide the link to the Drivers of HP Pavilion Slimline s5-1060 desktop PC page.

  I hope that I have answered your question to your satisfaction. Thanks for posting on the HP Forums. Have a great day!

• Need help... New office which does not recognize the IP address

  I need help, my father, I bought a HP for Christmas to replace its old.  Problem is that I can't the computer to recognize the INVESTIGATION period, it says all drivers are working correctly, but still cannot connect either wired or wireless.  I have only addressed dells, it's my first experience with HP on Vista.  I need help fast because I'm about to go home and I would like to have him upward and running, any help or suggestions would be greatly appreciated

  I appreciate the suggestion and assistance.  After talking with tech support, they said it was actually the computer, I returned it and got a replacement and everything works fine.  Once again thank you to all who helped.

• LR does not recognize the same image to two different places

  I keep my photos filed under localization. When I get ready for a show I will copy for review in a folder with the name of the exhibition.  I have a situation now where LR has imported an image in the folder of the exhibition, but it won't import back into the original folder.  I click on synchronize folder, LR find three files and then refuse to import. Windows Explorer shows 225 files in the original folder, that LR will be important only 222 of them. I've always found retrieve files stored in LR a clumsy operation, I've used it since the verse 1, but it drives me crazy.

  Uncheck the box "Don't Import suspected duplicates" in the upper right of the Panel Import... should be no children then!

• Account Internet preferences system does not recognize the password for my AOL account... and so mail does not read the email in my AOL account

  Account preferences Internet system does not recognize the password for my AOL (Internet) account... and so Mail does not read the email in my AOL account

  Mail asking me to "Enter your password for [my AOL account] in Internet accounts."

  When I enter my password Internet accounts says it is "Impossible to verify the account name or password."

  iMac (24 inch, early 2009)

  Processor clocked at 2.66 GHz Intel Core 2 Duo

  Memory 8 GB 1067 MHz DDR3

  OS X 10.11.1 (B 15, 42) El Capitan

  Remove the password in Keychain Access (Applications/Utilities). While there, menu Keychain Access of relief.

  The problems of Keychain - see post of khati

• I just buy Photoshop and I'm going to download and Safari says it does not recognize the address

  I just buy Photoshop and I'm going to download and Safari says it does not recognize the address

  Hello

  If you purchased Photoshop CC, please go to https://creative.adobe.com/apps and log in here with your e-mail ID. If this is your first time plaese reset the password

  Search for Photoshop and start the download of Adobe Creative cloud.

  PS: Adobe creative cloud will be installed automatically

  Ankit

• Portege Z930-118 does not recognize the external USB CD/DVD drive

  My new Z930-118, with windows 7 64 bit home, does not recognize the external CD/DVD drive when I plug it into the USB port.

  The CD/DVD device does not even appear at all in Device Manager.

  The reader is a SE-S084 Samsun and works well on another laptop.

  I already checked for the "upper_filter", "lower_filter" with the regedit, but entries are not there, so no help.

  Hello
  I m not very well how to help you.

  I found some information about this WEIRD disc and it seems that he didn't need an external power supply. Its USB bus powered so I guess around 500mA power since it is the default value provided by a USB 2.0 port.

  I don t think that there is a problem of missing software. It is a plug n play device so you need to connect it to the USB port and the system should automatically recognise.

  From my point of view of the few you try to connect the external USB ODD two ports to aid a * Y * Cableusb.
  I think the reader needs more power provided by a single USB port.

• DreamColor LP2480zx does not recognize the USB for calibration

  Hello

  I have a DreamColor LP2480zx, which does not recognize the USB connection to the computer during calibration.  I have my eye HP connected through this monitor, so I know the connection and the cable is good and mouse, keyboard.  My setup is like this:

  Reference Dell 690 running 64 bit + Windows XP

  DreamColor LP2480zx

  Apple Cinema Display 23 "

  I bought the DreamColor used, and in all other respects, it seems to work very well.  The original owner didn't have it calibrated within a certain time, but said that having had no problem with the previous calibration.  I installed the last APS (version 2.0) and updated to the latest firmware.  These updates produces no change in recognition USB problem.

  The interesting thing is, I was able to calibrate the Apple Cinema Display, using the same configuration of connection (mouse, keyboard, and HP eye connected to the computer via the LP2480zx) APS was able to see the USB connection and this very well calibrated monitor.

  I had trouble with this problem for a few days.  I've looked around quite a bit online and found a few others who have this same problem, but I did not yet find someone who can point out a solution.  If anyone has had this same problem, or has heard of results that correct it, please let me know, because it's very frustrating.

  Thanks for any help

  Clay

  An update to my previous post, I realized a work around for this problem.

  Apparently, this problem has to do with the Dreamcolor screen and/or software APS do not like working with 64 bit systems.  I'm not saying that it is always the case, but I saw the other posts on this problem on 64-bit systems, and I spoke with two other people personally who told me that they also had the same problem, try to calibrate its Dreamcolor monitor when it was attached to a 64-bit system.  HP does not seem to be concerned about this problem, because they do not even recognize its existence, but since I'm far from being the first to report this problem, he's obviously not a one-time problem.

  My solution was this: I had connect the monitor to a regular running XP 32 bit system.  After I did, I could re - calibrate the monitor without the problem of USB connection.  This isn't a very good solution because not everyone has access to several machines, running different operating systems.  But it's a work around, and it worked for me.

  Hope this helps other people who have this same problem with their Dreamcolor monitors hooked to their 64-bit systems.

  Clay

  PS- I posted this as resolved, only because I was able to calibrate my monitor.  It's not really solved the problem, but it gets the monitor working again.  Maybe HP will address this problem in the future, but I'm not holding my breath.

• Tecra M9 does not recognize the SDHC 4 GB

  Tecra M9, Windows XP

  The internal card reader does not recognize the SDHC 4 GB (provider: "extreme memory"), being inserted in camera or PNA not connected via USB, no problem to read or write to the card.
  No idea how to get the card to work with this card reader?

  Hello

  I have an idea.
  I think that the SDHC 4 GB card is not recognized because a Microsoft patch is not installed on your XP operating system.

  Microsoft has released this document which should help you to solve this problem:

  [Hotfix for Windows XP that adds support for a capacity of more than 4 GB SDHC cards | http://support.microsoft.com/kb/934428]

  Good bye

• Satellite A100 does not recognize the new CD/DVD drive

  I bought a new CD/DVD drive for my A-100 of Toshiba Satellite age of four year old went crazy and wouldn't work.

  Unfortunately, I bought a DVD of Toshiba Portege A100 / reader Combo CD - RW that is not exactly what I had before the jump that it will still work.

  Unfortunately, I'm surprised because it does not recognize the CD/DVD drive at all: /...
  It seems to work, and the light blinks I think that it is not broken.

  I just plugged it because that's the way I was told to do.
  I need to download the drivers to operate?
  It will work on my laptop, or is it a "most recent" CD player that will not work with my laptop?

  I'd appreciate any help. THX

  The BIOS does not recognize this new CURIOUS because the player seems not to be fully compatible.
  I think there bad master/slave/c-salt settings

  As you know these settings can be changed on the external CD/DVD drive for desktop switching jumper. But it is not possible for computers portable CD/DVD players.

  You can solve it only purchase a new compatible disc.

  Usually the ASP in your country could help you buy this disc of these guys here
  However, you can consult the user manual if there are a few details on the compatible sides.
  My user manual provides this information.

• Satellite A30 PSA30E - BIOS does not recognize the HARD drive

  Hi all
  I have a Satellite A30 (PSA30E) and I start the computer. When I enter the BIOS it does not recognize the hard drive.
  Does anyone no what I can do?
  Is it possible to restore the BIOS?

  Thank you

  Hello

  You replaced the HARD drive by a new one or the BIOS don't recognize the old HDD?

  Usually if the laptop is not able to start and that the BIOS does not see the old HDD then I guess that the HARD drive is faulty.
  If the BIOS doesn't recognize the inserted new HARD drive and then either you ve bought is not compatible, or the size of the HARD drive is just too big.

  Please provide more info. You see error messages?

• PC does not recognize the third HD

  I would like to add a third internal HD to my PC via a SATA connector, but my PC is so far not recognize my third drive after connection.

  Data sheet:

  M7664X http://support.hp.com/us-en/document/c00771737

  MB: A8M2N-(Bios 3.10) http://support.hp.com/us-en/document/c00783678

  Win 7 Pro

  GPU and upgraded PS

  Current readers and connections;

  C: SATA HD with OS and only for programs

  D: optical drive SATA

  E: SATA HD for storage of all the

  *: Original optical drive connected with IDE cable but is no longer recognized after that I recently installed Blu Ray compatible optical drive.

  New HD 2 TB correctly connected to the power supply and cables SATA MB but when I start the PC, Windows does not recognize the new HD connected on the fourth slot SATA.

  Is there something I should do under PC Set UP to initialize the new HD that I jumped?

  Refusing to make waves is not an indicator of a life lived well. Refusing to make waves is the State that precedes the drowning. -Author Paul Coughlin

  If you are not sure of any stage, confused, DO NOT make changes.

  How to prepare a hard disk

  Start, Control Panel, administrative tools, then:

  • Click here to open the computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  • In the left pane, under storage, click Disk Management.

  • OK, lets check in disk management. Your boot drive will display a Disk0. Stay away from that.

    Your 2nd hard drive will be displayed as Disk1.     Stay away from that.

    3rd (new) hard disk should appear as Disk2.      If it is this that "see you", then continue.

  • Click on a region not allocated on your "new" hard disk and then click New Simple Volume.
  • In the new Volume Simple Wizard, click Next.
  • Type the size of the volume you want to create in megabytes (MB) or accept the maximum size by default, and then click Next.
  • Accept the default drive letter or choose a different drive letter to identify the partition, and then click Next.
  • In the Formater Partition dialog box, do one of the following:
  • • If you don't want to format the volume right now, click on do not format this volume and then click Next.
    • To format the volume with the default settings, click Next.
  • Review your choices and then click Finish.

• How to create a guest account? I followed the instructions and it says that it does not recognize the user!

  I followed the instructions to create a guest account and it says that it does not recognize the user's address or the password.

  Hello

  1. What is the operating system installed on the computer?

  2. are you trying to create or attempt to activate the guest account?

  3. How have you tried to create the guest account?

  4. What is the exact error you get when you try to create the guest account?

  Perform the steps in the articles to create a guest account and check if the problem is solved or not.

  Turn the guest account on or off (Windows 7)

  Turn the guest account on or off (Windows Vista)

  Hope that helps.