Warning in a host brilliant intalado ESX 4.1

Similar Questions

• At boot Dell Studio 540 running Vista, I get a warning that "Windows host process (Rundll32) has stopped working.

  After each start up my Dell Studio 540 with Vista, I get a warning that "Windows host process (Rundll32) has stopped working.  Although this 'fault' seems to have no obvious effect on the following operations, it is very annoying to have to clear the window. I applied the suggested solutions elsewhere, but without success either.  Can someone please help me - in simplistic terms that I am a silver surfer?  Thank you very much.

  * original title - yet another problem Rundll32 *.

  Thanks a lot for the guide. Finally, I've identified the problem via the boot as in the NVIDIA driver.  I've now updated that and everything seems to work fine - touch wood!

• applying profiles from the host to another ESX version

  Hello

  If I create a host on an ESXi 4.1.0 host profile and try to apply it to a 4.1 ESX host going to work?

  No, but shoud work the other way around.

  of http://www.vmware.com/files/pdf/techpaper/VMW-Host-Profiles-Tech-Overview.pdf

  Created from a reference host ESX VMware host profiles can be applied to the ESX and ESXi time hosts. An ESXi host profile may
  only be applied to an ESXi host. ...

  André

• Hosted in an ESX ESX

  Hi all

  I am facing a problem with nested ESX environment, I have Dell Power Edge server with 24 Ghz of processing power, and 64 GB of RAM, I created a virtual infrastructure in an ESXi host. I created 2 ESX hosts that are in fact virtual machines with 8 GB of Ram and 4 CPUs each.

  The problem I am facing, I can't start the VMS created under these nested ESX hosts. It is said that cannot start a machine virtual unti the vm on the outside is classified as ESX.

  I have no option to qualification these ESX ESX host in ESXi, this option is only available in the VM Ware WorkStation. Is there a work around for this.

  Please mail me the answers at [email protected]

  Thank you

  Khurram shahzad

  Hello

  Take a look at this link, can be useful:

  http://www.vcritical.com/2009/05/VMware-ESX-4-can-even-VIRTUALIZE-itself/

• Apply all critical updates on a 'ESX Update 1' hosts = "update of ESX 2"?

  I applied 'Update 1-Complete' a few guests ESX, which worked well, but then noticed that many critical updates were waiting to apply.   With my Windows Service Pack / Update critical mentaility ceiling, I decided it was a good idea to apply all the critical updates, thinking that this leaves me in the 'day 1' so all available critical updates before the release of "Update 2".  However, after you apply all critical updates, build number seems to be "Update 2"?  I made sure the 2 update was not in the list of patches applied prior to reclamation.  So the question is, apply all the critical updates automatically asks you to a higher level of the major version.  In my case, lifting the crowd of ESX4 update 1 to ESX 4 Update 2?  I need clarification on this because I need to stay in 1 update constraints HCL.

  Thank you!

  don't get too confused, there is a bug in 4.0.x but has been fixed in 4.1.  In addition, there is a known issue in vCenter 4.0 base patches U1

  See below

  Two different Version of ESX Build numbers?

  http://www.VMware.com/support/vSphere4/doc/vsp_vc40_u1_rel_notes.html

  • vCenter displays an incorrect version of the ESX host after restarting the vCenter service

  > If you restart the server vCenter service once you upgrade the host ESX, vCenter may display an incorrect version of the ESX host.

• Profiles of the host and minimal ESX release requirements version?

  Hello

  is there any official information regarding the minimum requirement for the ESX Host profile version? I can't find it anywhere.

  Thank you.

  ESX Version 4. (vsphere)

  MCP, VCP

• warning on form hosting

  I just finished the first stage of a Web site for a client. the site is hosted on godaddy and was exported to HTML.

  However when the site was done with his conversion, this window appeared:

  

  Forms built with wufoo.

  any ideas?

  This means that there is a widget of Muse form inserted on the Contact page which would not work with non - BC sites and therefore the warning when exporting to HTML. If you already use Wufoo forms that are inserted in the object-> inserer insert HTML code, simply delete the BC (the widget Muse form) of the Contact page form.

  Thank you

  Vinayak

• Unable to add a lun to esxiting to host ESX 4

  I'm not able to add a unit number logic esxiting presented to the ESX host to an esx host 4. I chose gt & Add storage; disk/Lun & gt; I chose the desired lun & gt; Keep the existing Signature & gt; Next & gt; Next & gt; Finishing. I get an error message "Unable to change the configuration of the host." I was able to add to the initial ESX4 host, but not a second. This is an existing lun created in ESX 3.5 the lun in question has two extensions added, which would explain the message "Warning" status on screen edatastore th. The warning does not appear in ESX 3.5, however.

  In my view, it is a bug, and in fact we have an open PR with VMware.  If you try to add the LUN back using vCenter, when you will encounter the error.

  Have you tried of you connecting directly to the ESX host and adding back?

• Cannot add the ESX 6.0 host to vCenter Server 6.0

  OK, I'm testing laboratory a vsan 6.0 cluster.

  I have my running 6.0.0 esx hosts and vcenter server is 6.0.0 also.

  I have the services platform on a virtual machine and vcenter on another. I was able to create a data center, then a cluster below.

  Then I went to try to add a host to my group and I get this error...

  Failed to contact the specified host (hostname\IP). The host may not be available on the network, may have a network configuration problem, or that the management on this host services may not respond.

  
  

  Per this KB: KB VMware: Add a host VMware ESXi/ESX from VMware vCenter Server fails

  
  

  I confirmed that my vcenter server and platform services server can see all esx hosts. From the vcenter server, it can ping the host esx and PuTTY can access all of them. I even installed the client and it can connect to all esx hosts. I used the netbios name, IP and FULL domain name and they all work.

  I have only a single subnet, so this isn't a problem. DNS resolution works in all areas of both sides, vcenter esx hosts and host esx to vcenter.

  
  

  I am quite puzzled.
  

  
  

  
  

  OK, after working with VMware on this issue, I think that I thought about it.

  All my hosts are DL360 G6 servers.

  My hosts are run the same build «VMware-ESXi-6.0.0-2494585-HP-600.9.2.38-Mar2015.iso» ESX Downloaded from HP.

  All buildings are in trial mode.

  After placing a call to VMware, they had me build some ESX VM, the services of the platform and the vcenter VM on an ESX host. We suspended because it took all day to go upward.

  Once I woke up all the parts (sql server, esx vm, server platform & vcenter) in virtualization nested, I created my data center, then Cluster then added the ESX host.

  The hosts added properly, no error. Then I remembered when I installed ESX inside a virtual machine, I am angry that the iso, I had the habit of HP does not work in my VM nested due to virtualized hardware.

  Then a fire came into my head. We will rebuild all of the physical cluster but NOT use the CV provided the iso file but use VMware provided iso file "VMware-VMvisor-Installer - 6.0.0 - 2159203.x86_64.iso".

  I did it today. I have rebuilt all hosts with the provided iso file VMware ESX...

  Spun SQL Server vCenter, service platform, all VM VM VM you need. My AD & DNS VM are on another server, so he has been upwards all the time.

  Connected to the web interface (yuck!).

  Created my data center...

  Created my Cluster...

  Add all my Cluster hosts.

  All of this worked!

  Therefore, if you encounter the same problem, I'm plan to generate your with the provided iso file VMware ESX hosts and try it. In my case, the provided HP iso file didn't work properly for me.

  I also downloaded the iso file of HP 2 other times to make sure and do a validation test and it did the same thing.

• Unable to connect the client via vsphere ESX host

  Dear team,

  Once I tried to connect to client host via vsphere ESX I m getting following error.

  

  VCenter version: 4.1.0 345043

  vSphere client: 4.1.0 345043

  ESX Version: 4.1.0 721871

  You help me on the same request.

  concerning

  Mr. VMware

  It is usually advisable, but not an obligation, to have the build of your version of vCenter client correspondence.

  You can see the Interopabilty matrix for supported configurations

  http://PartnerWeb.VMware.com/comp_guide2/SIM/interop_matrix.php

• Cannot delete entry local old ESX host storage

  HY all!

  We changed one of our esx hosts (say name = ESX - A1) with a more recent material, the server also called ESX - A1.

  These where the steps...

  1.) former host in maintenance mode

  2.) deleted from our cluster HA.

  former host stop 3.)

  4. change material)

  5.) poweron new host with same name ESX - A1

  Everithing was very good, except for one...

  I still can't see the local storage of old ESX - A1 in the inventory of data store and the option 'delete' is unavailable (dimmed).

  Thanks for any help!

  Best regards

  Peter

  Take a look at http://kb.vmware.com/kb/1026661 to see how to remove a vCenter Server inventory data store.

  André

• Communication-ESX VM host.

  I'm looking to optimise traffic between virtual machines on multiple ESX hosts and falling a little short to determine what method would work well:

  Currently the majority of my company connects via Terminal servers on a private MPLS network.  Terminal servers are hosted on two ESX servers.  The majority of our key applications is hosted on a server ESX 3 rd.

  My office is local to the server and executes most of the software directly from their PC.

  Headquarters Branch offices (entering on MPLS) vs. social vs. servers are all already split on several VLANS s to isolate traffic.

  What I am looking in / wondering is if it would be possible and beneficial to consider the addition of a new card NETWORK 2 ports on my ESX hosts map which is designed to handle traffic from a virtual machine on an ESX to a virtual machine to another virtual computer - and if it is possible to do so without changing the settings on the virtual machine themselves.  Specially set up routes in the ESX hosts, saying that all traffic destined for the specific IP / range GB on the other two NIC

  Is this possible? Will it work? and is there an advantage to do so?

  Connections are currently 1 GB to 1 GB switches and there are 2 NETWORK card for most of LAN traffic.  Although it seems we are saturating the network yet, at the same time go on these 2 NIC we have all the information from the TS to the user, as well as information from the TS on the Application Server.  Ultimately, I want to just isolate without having to change each of the virtual machine.

  To answer your question - in a standard vSwitch or even distributed vSwitch, you cannot route traffic on specific network cards.  Maybe in the Nexus 1000v, you can configure static routes by uplink, but that's just a guess.

  In vSphere (+ 4.x) when the virtual machines communicate with each other on the same host, even if on a different subnet, it never touches the wire.

  The only way to do what you ask without the Nexus (perhaps even with?) is to add another NIC to the guests in a VLAN separated and then on virtual machines to configure static routes so that they use only the second interface.

• help help... ESX host shows that only ANSWERS DO NOT

  Hello

  I have the ESX host, who said State says "NOT RESPONDING" status virtual Center, but the host's who responded and I am able to connect to the console using PuTTY... Can someone help me what could be the problem to show the status as no ANSWERS DO NOT... I do not see that error correct logs in the logs events and... The virtual machine that is hosted on the ESX host also works very well and im able to RDP to it with all the problems but in VM, it shows as disconnected...

  ASK YOU TO HELP ME QUICKLY BECAUSE IT IS IN THE PRODUCTION...

  Hey Shashi,

  If the ESX host is unresponsive defeated VC if you can connect to the host ESX via VI Client, if yes, then the service pass works very well and you need to troubleshoot the service virtual Center on the esx host agent. You many consider them raise all initially with order # service vmware-vpxa restart

  If you are unable to connect to the ESX host using VI Client, restart the service spend using service # mgmt - vmware restart and check the logs # tail f /var/log/vmware/hostd.log check for errors/progress.

  Also look at kb.vmware.com for that matter and you'll find some articles that may help you solve problems.

  All the best

  If you have found this or other useful information, please consider awarding points to 'Correct' or 'useful '.

• Best method to move vCenter VM to another ESX host?

  Update Manager has refused to allow us to stage an update for our ESX host our vCenter VM running on. So we have to move the other host our vCenter ESX just update this ESX host. But as we use vSphere Standard that does not come with vMotion and storage vMotion, we must stop vCenter and make a manual transfer.

  Did you guys a better method to do that in order to copy files from local storage ESX VM vCenter to the PC running the VI Client on and then copy the file vCenter VM from the PC to the local storage of the other local ESX storage? Because we do not have a usable for the moment SAN storage.

  BTW, we tried Storage vMotion with the year evaluation license last to move vCenter and it failed.

  We use mainly use the converter for the conversion or 'movement' of VMs from one region to the other because it is a GUI based process.  We have quite a few movements/conversions per week, so we have standardized on the converter.  If we have problems with converter (several failures, etc.) we will perform a dorsal scp of the actual VM files.  I agree that this method is faster, but in our case, we did not want to open the console for jobs like that, it seemed a more dangerous process from the console (deleting files etc...).  We used the converter to convert physical movement to virtual, virtual virtual clone, convert virtual from one version to another (workstation to esx for example).  I also like that the sysprep process can be automated in the process, but also some virtual machine configurations.  If we say PCS had a virtual machine to another location and we created a clone in the new location, we would have to scp, starting the virtual machine and then treat the sysprep (Windows) and rename, configuring ip etc...

• Problem connecting vSphere client to a host ESX or ESXi to

  I have tried with an ESXi host so an ESX host.  I spent the installation on a square between hypervisors, as well as to try on another box.  I have redownloaded the two hypervisors and check that they match checksums, I reinstalled the customer charge downloads of both vSphere host as well as the www.vmware.com/downloads.

  Whenever I try to connect to a host, I get the same error.  First of all, I get:

  Error analysis of the file "clients.xml" Server "192.168.2.195".  Logon will continue, contact your system administrator.

  After clicking on OK, I get this error:

  The initializer for type for 'VirtualInfrastructure.Utils.HttpWebRequestProxy' threw an exception.

  I would appreciate a suggestion or an explanation of what is the question.

  Thank you!

  edited for spelling.

  This is not a problem with the server on the host, there more IE7 problem. Check the 1011329 of Vmware KB

  http://KB.VMware.com/selfservice/microsites/search.do?cmd=displayKC&docType=kc&externalId=1011329&sliceId=1&docTypeID=DT_KB_1_1&dialogID=27182245&StateID=1%200%2027180582

  AM,

  If you have found my reply to be useful, feel free to mark it as useful or Correct.

  The latest articles and articles about Virtualization:

  http://communities.VMware.com/blogs/amodi

  http://vsolutions.compare2shop.com