Warning screen

Similar Questions

• Is the phone number and alarm warning screen I saw a scam?

  Just got a very a screen red background on my computer and a strong voice message, saying that the malware was attempting to invade my computer. He pretended to be Mozilla Firefox and told me to call 844-338-4651 for an easy solution to this problem. There were several windows with red filtered in back and directions in the smaller screens. I didn't have the right to close the small windows filtered to join the largest window without actually closing the red window, which closed all the.

  Just one telephone number had one please press one message without context, so I hung up. I then customer of google mozilla supported number, consisting of 844 844-2429 and got an Exchange responded by a person with a very strong South Asian accent. He has not identified himself as working for Mozilla until I asked if it was Mozilla (stupid me). I explained the problem and said that I had to find a way to confirm the number preceding or report it as a scam. As soon as I said scam said I must do and hung up.

  The warning screen told me I had to get this fixed malware invasion before I went shopping on the internet. I'm pretty freaked out right now, but I'm 80% sure it was a scam. Can you confirm?

  Thank you
  Anne

  Hi, yes you are right to be wary, Mozilla will never ask you to call them. If you did, they may well have asked you to enter an address into your browser which would enable them to take control of your computer and access your data.

  - Avoid and report Mozilla tech support scams.

• I have a persistent popup on my iphone screen saying I have ad/spyware and need to call support technique apple to 1-800-893-4975. Was suspicious so nicknamed by land line. No response. Can't warning screen to stop jumping whenever I have access to the in

  I was on facebook and clicked on a link to a recipe (went there before). I had a start to screen popping up saying repeatedly I had ad/spyware and necessary to call 1-800-893-4975 (supposedly to support technique apple) to find out how to remove it. I was suspicious so I used my landline to call the number. There was no reply or a message. It is also on the screen: www.issue.safari.net.

  I don't know if it is a type of scam. My support of apple technology has expired and cannot find any phone #/ email I can use to communicate with them. I also can't find anything online. I can't get the screen to stop appearing when I go on the internet on my phone.  Can anyone help? I'm not all tech savvy.

  It's a scam. Do not call the number.

  Double click on the Home button, and then drag upward on the preview of Safari.

  Go to settings - Safari - clear history.

  Restart Safari.

• Windows smart warning screen to flash Bios application

  Hello

  I have Acer Aspire V5 - 573G and download the BIOS update from the acer site.

  Operating system is windows 8.1.

  But when I try to run upgrade from the windows application bios displays this warning.

  Windows SmartScreen prevented an unrecognized application to start. Running this application might put your PC at risk
  Publisher: Unkonwn Editor
  App:ZRQ_224.exe

  Should I ignore the warning and trust this application?

  Thank you

  You can find this article helpful:
  BIOS Update frequntly questions

  .. and Yes, it should be good.  However, if there is no reason to update, we do not recommend updating.

• How to GET a WARNING SCREEN FOR CAPS LOCK.

  keyboard Microsoft wireless without caps lock indicator

  Hi Maxim Ashtami,.

  First be sure you have the latest version of the software you download for your keyboard:

  http://www.Microsoft.com/hardware/download/download.aspx?category=MK

  Once installed, you can proceed as follows:
  a. click on start
  b. type keyboard in the search field
  c. double click on keyboard options
  d. the key settings tab, go to the list of key parameters
  e. Locate and double-click CAPS LOCK
  g. in the menu, you should see where it says "State LOCK SHIFT display on screen.
  h. click on the checkbox, then click on finish

• Deletion of messages in the newspaper and on the warning screen

  For a number of radio buttons in my form, I get the warning:

  "This fragment reference has replacements the to one or more properties of the source fragment."

  His message of 2035.

  For each instance of this warning, I have an information on the design window icon. It's distracting, and I want to get rid of these icons on the window.

  How do you do that?

  Thank you!

  Cindy

  Under tools options there are several places where you can turn off the warning dialogs aroound different areas. I'm not sure of that specific to your situation, but I think that it is under wizards and advice and the option is to see the Place of warning markers.

  Paul

• Got to the WARNING screen like on the picture.  Safari is locked.  Number not the Apple support

  

  How does this happen?  Was on a standard page of the Amazon web I recall.

  It is a scam. If you can quit or force - quit Safari, do. After that, restart Safari while pressing the Shift key.

• Weird things on the screen and the watch does not load

  can someone tell me what this means and how to fix it? Was given on the charger for hours, can not, have you tried the new wall charger and no difference

  Your watch is probably too warm. Keep it in a cool room to let it cool down. The third screen is a warning of the temperature.

  Try to load again, after that the watch is cool.  If you are using a case, keep it open.

  https://help.Apple.com/watch/#/apdcf2ff54e9

  For operating temperature requirements, see this page: Keep Apple Watch in temperatures acceptable - operation Apple Support

  Apple Watch is designed to work best with a temperature of 32 ° to 95 ° F (0 ° and 35 ° C) and must be kept between the ambient of-4 ° and 113 ° F (-20 ° to 45 ° C) temperatures.

  For example, Apple Watch should not remain unattended in direct sunlight for long periods, undergoes large changes in temperature or humidity, or be left in a car on hot days. Store and use your device outside the recommended temperature range may shorten battery life or cause other damage.

  Learn more about the management of the temperature for Apple Watch

  If necessary, Apple Watch will regulate its internal temperature. There are several things you might notice if this happens:

  • Charging time may increase, or load could stop
  • The display may dim
  • A temperature warning screen may appear
  • Data transfers could interrupt or slow down the
  • Apps could close

  If your Apple Watch has above normal temperatures:

  1. If you wear your device, turn the power off and remove it from your wrist.
     If your Apple Watch is charging, remove the charger.
  2. Move your Apple Watch to a cooler place and let it cool completely before you put it back on or to continue to load.

• Equium L10 300 Wont start white screen

  Hi I wonder if anyone can help or advise me with a problem starting

  It's a portable satellite L10 300 XP homedition, after running PC doctor to remove Popups and adware my laptop stopped commissioning.

  Initially started after the system check it kept returning a blue warning screen that flashed off very quickly before close and try to restart this making it very difficult to read, but I managed to do something about a problem of physical memory and the dumpster, I managed access the options of safe mode and tried each of the options including the last good configuration known, but all failed to start the machine and I'll be back the same error message. Then at some point with all of my violin that it now wont even run the system check before crashing it's now only the initial startup which allows me to access the system BIOS F2 and F12 and nothing more.

  I have the product recovery disc and tried briefly before interupting it is when I realized the instructions say it will reformat the hard drive and I'll lose all my data that I do not wish to.

  Is there a way for me to fix it or copy extracts my data before using the product recovery disc.

  Thank you very much in anticipation.

  First of all, you should check the memory, it may be altering the data. Have you recently installed spare memory? Go to www.memtest.org and memtest from a floppy disk or a bootable CD.

  To recover your data, you can remove the HARD drive and connect it to another PC using a 2.5 "USB adapter. Then put the HARD return drive recovery to and execution.

  PS. You can view the blue BSOD code by pressing F8 at startup of Windows start and select 'Disable automatic restart in the event of system failure' in the Menu.

• "We could not all updates. Undo changes. Do not turn off your computer. "Stuck on this screen. UGH.

  I am extremely frustrated.

  I recently bought a Toshiba Satellite laptop. It works fine, until today. My computer tried to update and in the process, failed. I wait now more than 4 hours on the same screen. Pressing F8 does nothing. I tried to restart. I can not open troubleshooting because the computer is stuck on the same screen. The circle to show that it is loading is always in motion and my mouse moves as well. I called MIcrosoft support and they told me to reboot and wait. It is, I already did, but they told me to do it again. I have some files I have would be broken lose. Help, please.

  Hello

  If you don't mind not to lose your files, turn the system off.

  Turn off the computer.  The next step, you will hear a shrill signal strong.  Be prepared.

  Press 0 (zero) key and power up the computer

  Key 0 (zero) when the recovery warning screen

  Press the F12 key during the appearance of the Toshiba logo

  You should then see the Start Menu

  Using the up/down arrow keys, select > HDD Recovery > press Enter

  If offered a selection of Windows 32 or 64-bit, be sure that you select the correct operating system

  You should be able to create a recovery media.  Once you have installed Windows, click Search > Type recovery

  You should see an option to create your own recovery discs

  If this isn't the case, I suggest that order you them from Toshiba.

  http://forums.Toshiba.com/T5/system-recovery-and-recovery/recovery-media/TD-p/9148

• Elliptical selection tool - "no attention WARNING: no pixels are selected to more than 50 percent." The edges of the selection will be not visible.

  I am convinced that it is a bug in Photoshop CC 2014. I am on Windows 7, 64-bit. The 2014.2.2 version, and the version is 2014.204.r.310 x 64. If I select a zone by using the Rectangle tool, the area is described as usual. However, if I use the elliptical selection tool and select the same area, I get the warning. Even if I fill the region using the paint bucket, I always get error if I try to select using the elliptical framing box. Is always successful with the rectangle. I've seen other users re issues. the lasso tool with the same behavior and warning. The usual answer has been put at the edge of the feather to 0. However, it is by default (on my system) to 0.0. Using the selector to improve the contour and by replacing the value 0 (or any other value) makes no difference and in fact after this and clicking OK, the warning screens.

  Is this a bug with the elliptical selection tool? I've updated Photoshop just before submitting this question, and the behavior is unchanged.

  Hi irwin,

  There are different possibilities to solve this situation. Try one of the following options;

  • Decrease the radius of softening of the selection tools,
  • Increase the size of the selection
  • Increase the size of the image (this may decrease the quality of your image),.
  • Ignore the warning message and keep going to work on your file (remember that your selection is still there).
  • Also, make sure that you selected and the targeting of the correct layer.

  You may prefer to set the feather to zero in on the selection tools and use the pen (Ctrl + Alt + D) command for each specific selection. Using the feather command does not change the parameter of smoothing (zero value) on selection tool, so you don't need to wory on previous selections feather RADIUS.

  Let us know if that helps.

  Kind regards

  ~ Mohit

• Warning of Type2 SCD

  Hi all
  
  I have an Interface that loads of dimension SCDType2. It uses IKM Oracle Dimension to slow variation.
  
  The surrogate Key (Key size) displays the following warning - "don't check not null was disable in this interface for the mandatory column.
  
  What is it?
  
  When I say fixed error on the warning screen, I can run the interface but I do not see the changes made to the interface.
  
  -Henry.

  Hi Henry,.

  If it is filled by a sequence that is located on your target database, where it should be run depends on where your I table $ (staging) is created. That is done it will be created in the same pattern as your target, or you have temporary objects created elsewhere.

  If they are identical, you can use "Execute on staging", if they are different, you must use "target".

  I think the problem here is that the column is not Null, if "Flow control" is set to true and it is set to "Execute on the target", all records will be removed I$ in $ E that the column will be = null because it does not get populated until it reaches the target. If it is set to "Execute on staging", then the I column $ will be filled, so no problem.

  To be honest, if you use a sequence value to fill the column, there is no need to check if it is 'Null '.

  So, you have two options.
  1. If your staging scheme is the same as target value 'Execute on the staging.
  Or
  2. let the "Not null" checkbox disabled and run on the target if your staging scheme is different from your target.

  BOS

• I have an iPhone 6plus. Recently updated again 10.0.2

  I have an iPhone 6plus. Yesterday, I updated to version 10.0.2. Now my camera has a balck

  the screen will not work and where the flash is that it's unusable because the phone needs to cool off. My phone is not hot. It t was used for hours. Any suggestions?

  The iPhone will turn the flash off if it becomes too hot, the Photos.app that for example have a lot of processing power for the initial analysis of faces.

  See this document: keep the iPhone, iPad and iPod touch in the Apple Support acceptable - operating temperatures

  If you see the temperature warning screen, turn the unit off and let it cool in a cool, shaded, room even if it feels is too much war.

• German version: I configer 2 tabs, Google and GoogleMail but get 3 legs with an extra "Einstellungen" tab

  I have set up with 2 tabs "Settings" / "Use current Pages" when I run Firefox, 3 tabs are available. The 'Settings' tab is always also started well. What can I do to definitively reject the tab "settings"?

  ICH konfiguriere 2 tabs mit "Einstellungen" / "Current pages use" Wenn ich Firefox starte, sind 3 tabs available. Der tab "Einstellungen" wird immer mitgestartet. Was kann ich machen, um den "Einstellungen" auf auszublenden tab?

  Type of topic: config< enter > in the address bar.
  If a warning screen is displayed, press the button to be careful .
  At the top of the screen is a search bar. Type browser.startup.homepage.

  If you want, right click and select Edit. You can change the setting

  topic: Home (Default Firefox homepage),
  on: newtab (displays the more visited sites),
  Subject: vacuum (a blank page),

  or you can enter any web page or Subject: page you want.

  Note: Carefully remove what you don't want to leave.

• change .part dowloads

  all downloads for the end on my applemac pro tour via firefox end as f5crcVdN.zip.part also seen this begins to occur on a new imac also any file even a pdf eventually name.pdf.part abandonment .part on the end, see also now correcting spelling does not work in hotmail via firefox but ok with chrome

  Chris

  Type of topic: config< enter > in the address bar.
  If a warning screen is displayed, press the button to be careful .
  At the top of the screen is a search bar.

  Type: layout.spellcheckDefault are its values;
  0 Off Checker
  1 check that the multiline input boxes.
  Multi check boxes 2 and single line.

  Also check the spellchecker.dictionary entry.