WAG320N and PLK300 connection problems

Similar Questions

• Photon: Dropped calls and network connectivity problems

  I bought my Photon August 18 and he was not long for me first to the problems with network connectivity.

  The phone displays signal on the phone, but when you try to call, send text messages or surf the web. Zilch.

  A soft reset works every time. I've had some experience with the issue of the "appeal of ghosts", but had no network connectivity so often that he was too much a problem. Restores the soft 3-4 per day.

  I took the phone to the Sprint store and they told me that my phone verified and were not hardware problems that may be found. I said at the time on the update of the software of MR5 and was anxious to see how the phone after the update.

  I received the update on Wednesday and the phone worked fine. No appeal of ghost, no network connectivity not problems, only dropped the call.

  Now, Friday morning, I lost network connectivity despite seeing the strength of the signal and had to perform a soft reset to regain connectivity. My wife and I bought this phone at the same time. She had many calls interrupted before the update and we both experienced after that update eventhough signal showing on the phone is at least two if not more bars.

  Is this a known issue? Is it going to be/CAN this be corrected by a software update? Is this phone a lemon and he'll remember?

  I LOVE this phone. I don't want to get rid of it, but...

  Seriously. It's a phone! Making calls should be the FIRST thing that is done right.

  Please, someone, Motorola, reassure me that this isn't a lemon and that network problems are going to be fixed. I CAN wait, but I don't want to get stuck with two phones for $200 that need to be pampered just to be usable.

  Thank you

  TC

  Yes, it turns out that be was a buggy phone. Two stores tested Sprint phone for reception of the signal and they said that it spent; but as said the technician in the second store, the tests they take place the phone in ideal conditions.

  The two stores I've visited, said they were ready to replace the phone, but my first visit came just before the MR5 update software while I was willing to wait to see if the update corrects the problem. It didn't, but the replacement of the second store phone works fine with upgrading to MR5 and really no problem.

  I'll go ahead and mark this question as a response, but if you experience the same problems of chance complete loss of all network connectivity (Sprint or otherwise), I recommend getting the phone replaced. It is a bad camera.

  Oh and the technician at the second store mentioned the network problems. It has been a problem for them, but the most telling proof of the issue of network is random dropped calls. So if from time to time, you lose a call under the conditions of good network signal, it's probably not your phone and Sprint. I have almost that many abandoned calls as of late, so it could have been the wrong phone I had that really amplified the problem... or... Sprint has got some of the bugs in our region.

  Thank you for looking in. I hope that your problems are as easy to solve as mine and I hope that you are still within your 30 days so that you get a new replacement.

  Best wishes

  TC

• Satellite Pro C665 and internet connection problems

  Hi, will try and give as much information as I can, so sorry for the long post.

  I bought this new laptop in August is so very old, I connect to the internet with modem USB 3 G telstra and a cycle of 3 weeks he began to abandon the connection within 30 seconds approximately.
  The blue LED on the identification of the USB modem still flash, it has a connection, but I would get the yellow explanation mark on the icon of internet connection in the task bar.

  Now, the only way to recover the connection must close the connection of Telstra, unplug it, plug it back in and reconnect, a few times I have to reboot and will have to go through this routine 5 - 6 times and sometimes up to 10 attempts before I get a stable connection.

  So first I thought it might be the USB modem, so I got a replacement of telstra, but made no difference, then I had a replacement sim card and still no luck.

  Then I did a new install of Windows 7 and installed all the current updates, still no go.

  I then bought a wireless router to eliminate the USB connection and still have the same question.

  Sometimes it can be very frustrating trying to get a solid connection, but once it gets a good connection, it will stay connected for hours without any problem

  I'm not an expert with computers, but can usually find a solution to problems of software, I have, but that left me speechless and I think I've covered most of the region to address this.

  Thanks for your time.

  Unfortunately I can't say anything on Telstra 3 G USB modem. Toshiba doesn't support third party hardware, software and does not offer any kind of support.

  I put t know where you got this USB modem but I m wondering you didn't visit their store and test in functionality it bring your laptop with you. The people who work there could make inspection on site.

  I also put t know why you have this problem at home. Your router is not known to us, but is there a difference when using WLAN secure or unlocked and without password?

• The Smart TV Toshiba 32L6363DG and WLAN connection problem

  Hello

  I have a Toshiba 32L6363DG Smart TV.

  I have a wireless access Point and I would like to connect my TV!

  I chose the option of each network configuration: easy, manual or assisted.
  At first, when I enter the security key and configure all, it seems that it does not connect because he accepts and tells me I am connected

  Information out there "Wireless Configuration complete", IP and DNS address is automatically assigned. The network connection test tells me "unable to connect network connection, please check your network settings.

  I'M NOT THE ONLY ONE WHO HAS THIS PROBLEM, I HAVE READ IN MANY FORUMS IN GERMAN AND ENGLISH, THAT PEOPLE HAVE THE SAME PROBLEM WITH THEIR TOSHIBA TV.

  WiFi works fine for my computer and mobile phone.
  About the same distance from the AP that television (about 3-4 meters, no wall or obstacles) the intensity of the signal is HIGH on TV and everything should work, but doesn't.

  I need help

  Well, try to reset the TV to factory State setting and try to configure the WiFi connection once more
  Make sure that everything has been properly configured.

  According to the material information the TV supports the WLan standard
  802.11a/b/g/n and the type of encryption:
  WEP 64/128, TKIP, AES,
  WPA/WPA2-PSK

  I recommend you test the following encryption settings.

• Satellite A300 and wireless connection problems

  Recently, I had to use my recovery disk and restored my laptop to factory settings. Almost everything is back is the way has been, except for a small problem.

  The WiFi does not work. It is on, but when I go to connect to the wireless family network, it tells me to insert a cable.

  My laptop is the Satellite A300 - model psagca.

  I install the drivers of Realtech and still not get the case.

  Thank you in advance.

  Your wireless network is not visible to your laptop satellite?

• Satellite L450D: Windows 7 and Netgear connection problems

  Hello

  Ive recently bought a Toshiba Satellite L450D but I can't connect to a netgear wireless account...
  It works fine on another laptop and my toshiba can connect to an account of different eircom without problem...

  What is the new Windows 7, which is not compatible with the server or do I have another problem!

  Thank you! :)

  Hello

  What you mean with Netgear wireless account exactly? Do you mean the router Netgear WLAN?

  Normally, you can connect to each WLAN router. It makes no difference which manufacturing, you have the router but factory settings are different, this means that some routers have DHCP and static IP addresses, for example. I think you should check the TCP/IP configuration and update the WLAN driver.

  Check for an update WLAN Portal: http://aps2.toshiba-tro.de/wlan/

  Good luck! :)

• Satellite A105: External HDD USB and IPod connection problems

  Hello

  I have computer laptop toshiba satellite A105, last weekend that I have reinstalled windows on my laptop using the recovery discs, and now I had two problems.

  First problem when I connect my external hard drive, my computer show no icon of this hard drive, but when I check in the management-disk external hard drive is connected to my computer.
  Second problem is my IPod, a similar problem on the hard disk indicates when is connected to my laptop but when I checked in the device under usb controller Manager appears, but with the yellow circle and question marks.

  Could you help me to solve my problem?
  What about the Kings
  Wojtek

  Hello

  Have you tried to update the drivers of USB port?

  You should try this;
  -Disconnect all USB devices the USB ports.
  -Go to the Device Manager and remove all the USB root hub and all USB host controllers.
  -Restart the laptop

  After this procedure, the Windows operating system should recognize and should install the USB ports again. After restarting again you must connect only USB devices and must verify if they will work properly!

• WiFi for computer laptop HP ENVY 15 and Ethernet connection problem

  Hi, a few months ago, I brought a HP ENVY 15 Notebook PC running windows 8.1. It is connected to my wifi with Ralink RT3290 802.11bgn Wi - Fi adapter. My modem is a Technicolour TG582n 2 Wireless ADSL + with wireless 802.11 b/g/n compatible.

  As soon as I got there I noticed a problem of internet where I would be able to connect to my home WiFi network and get full reception bars but would have a hard time to access Web sites on web browsers such as chrome, mozilla and internet explore pages takes some time to load and eventually reached a page "this webpage is not available" (for chrome). This problem seems to occur only with my home network as it can connect to public wifi and my wifi friends and yet I have many other devices such as laptops and other smartphones connected to my wifi that did not at all have poblems with internet and it just seems to be mine. When I connect via ethernet I get good connection for about 10 minutes and then I was completely cut off. However, I can upload a file via the wifi ok if I can get it to start and I can play a game online well enough but often disconnected after an hour or two.

  I checked for new updates of pilot, but they seem to be up to date and im do not manually downloading and installing one on the hp site but I tried (I did probably wrong). I ran the diagnostic function, but it cannot detect all problems. I looked around the internet as well, but still havn't found a solution.

  Also I got the laptop sent back and received a new but the same problem persisted and as I walked through the process of the person I was talking to a admitted that I had a problem like they remote limited from my laptop for a little for the access problem.

  Please help, I've had this problem for a month or two now and is really becoming a problem since I use my laptop computer for purposes of requiring home internet work.

  Thanks in advance and I hope you guys can help!

  Hi @Eugene5 ,

  Welcome to the HP Forums!

  It's a great place to find answers and information.
  You have the best experience in the HP forum, I would like to draw your attention to the Guide of the HP Forums Learn how Post and more

  I understand that you have a problem with your connection Wireless at home. You are able to connect with full bars but are unable to access the web.   When you're lucky hours just access the Web, you can make a download if you get started in time or play games online for one or two before again declining. You ran the diagnostic function, but no problems were. You had the phone replaced for the same issue, but the replacement has the same question.

  You know your network is an 802.11 G or 802.11n.   How do I know if my WiFi connects using 802.11n (as superuser)

  Please check this setting.

  1. Open the Device Manager
  2. Click the network adapters to expand the list
  3. Right click on the Ethernet connection, and choose Properties
  4. Click the power management tab
  5. "" Please check that ' allow the computer to turn off this device to save power "is not checked.
  6. Repeat this process for all types of listed under network adapters.

  .

  What does your wireless card is supported?

  Here's a link for How to fix little or no Wi-Fi connectivity issues in Windows 8(of fixedbyvonnie) to help you.

  If you need further assistance. Please provide your exact model of HP laptop and your operating system.

  How can I find my model number or product number?

  Good luck!

• WRT 1900ACS - Apple TV and MUSO connection problems

  I recently bought a WRT1900ACS router to replace my ISP ZTE router. I used my Aple TV and domestic MUSO connected to my network via a network (5port) switch. I didn't swap - assumed for router a lot better compared to the ZTE routers.

  I noticed that my Apple TV and Naim MUSO will link is no longer home network/internet via Ethernet.

  Only, they connect via Wifi.

  Someone has encountered this problem before and how it was fixed. I prefer the Ethernet connection as its more stable and gives me a better connection to my other devices on the network.

  Any help is appreciated.

  Thank you

  Thank you boss
  Tested all the ports and they are good.
  Turns on the port linking wasn't good. After some fiddling and cleanup, it's all working again.
  Thanks for your help & congratulations to you!

• WRT160NL connection with n and USB connection problem

  Hi guys,.

  I have the Linksys WRT160NL router and I have two fundamental problems with that:

  1. I have a laptop HP with n on its wireless card connection. (it's an HP probook 4720 s). So I know that this laptop has ability. n I have the most recent driver vor he 3.1.18. The thing is that my Linksys router does not transmit sound wireless n, just g...

  What should I do to make it work with n as well?

  2. the second issue is that the USB connection is working in a very strange way. I have attached an ADATA with USB 3.0 HDD external, even. He works in 2.0.

  I have a lot of WAV files on it and when I stream to my receiver files pay with much intrerupptions, break ups. MP3 work very well.

  I don't know what to do to solve this 2 problems... Maybe someone could help me...

  Thank you

  Try changing some settings on the router wireless.

  Connect the computer to the router with the Ethernet cable. Open the router configuration page. Go to the wireless tab and the manual value configuration view. Change the channel to 11 wireless. Make sure that the network is set to mixed. Save the settings.

  Go to wireless security sub tab and change the wireless WPA2 with AES security mode. Save the settings.

  Click the tab under advanced wireless settings change the tag to 75 interval, RTS threshold and fragmentation to 2304. Save the settings. Now try to connect to the network again.

• Pavilion dv 8000t and Ethernet connection problems

  so, I posted on this forum before and did not have the problem fixed. but here again is the problem.

  Before installing windows 7, I had vista and in order to get the entire internet, what I had to do is plug the ethernet cable. Now after installing windows 7 I plug the ethernet cable and still no Internet. Internet, I connect to is provided by my apartment complex. all that I was told to do just plug an ethernet cable as I did with Vista.

  I downloaded a new driver from this link provided by someone on this forum and it did not help.

  FTP://ftp.HP.com/pub/SoftPaq/sp45501-46000/sp45671.exe

  After I installed the driver and rebooted and it always connects to the internet vis ethernet cable.

  I tried troubleshooting and he told me:

  connection to the local network does not have a valid IP configuration

  That's what I see when I have the ethernet cable is connected:

  device Bluetooth (personal area network)

  (heading RFCOMM Protocol TDI) Bluetooth device

  Intel(r) PRO/100 VE Network Connection

  Intel (r) PRO/Wireless 3945ABG Network Connection

  Please HELP, I'm tired of having to go into the lobby in my apartment complex to pick up wireless.

  Hello

  This file:

  FTP://ftp.HP.com/pub/SoftPaq/sp45501-46000/sp45671.exe

  is driver for Intel wireless. He's never going to fix your problem.

  I don't know then my solution will work, but we can try something like this:

  At startup, press F8, and then choose Safe mode.

  Go to the Control Panel-> device-> maps network manager

  and find here Intel (r) PRO/100 VE Network Connection. Click with the right button of your mouse and choose uninstall the driver.

  Try to install the XP driver for this model:

  Intel(r) PRO/100 VE here

  When there's some sort of problems with installing and then try to run it in XP compatibility mode.

  Resources:

  How to run a program in Compatibility Mode in Windows 7

  Make older programs in this version of Windows

  Reboot your system, and this time it starts in normal mode.

• 6525 - resettlement and internet connection problems Deskjet

  Hello

  yesterday I managed to install my new printer hp deskjet 6520 (5) on my HP Pro 3520 (AiO) with win 7 - using a wi - fi connection. Then, I also installed the printer on my laptop (sony vaio) - also use wifi. The two communicated yesterday with printer. But I have not tried to use brought down PC after install portable printer

  Nevertheless, today HP 3520 Pro could not have communicated with printer. Software repeatedly said the printer cannot be connected to the PC (while printing through the laptop was ok...). No miracle has helped so I decided to uninstall and reinstall the printer.

  I've uninstalled it successfully but when I try to use the hp guide software installation (http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=mp-122330-1&cc=cz&dlc=cs&lc=cs... he just said initially that I am not connected to the internet... Although I have no problem with the internet connection (I even tried connecting cable...).

  Help, please... I do not know how to do this

  Thanks in advance

  It is now resolved... I do not understand this, but when I turned off my laptop, the printer begins to communicate with PC...

  If HP - is there a reason why cell phone (with the installed printer) refuse the communication between the PC (HP Pro 3520) and hp printer deskjet 6525?

• How to question dignosis between P6 web and database connection problem.

  Hi all

  Initially we have access to P6 via a URl server http://ip: 7001 / p6

  We have migrated our server to the new support. now above the URL does not work.

  but instead of the IP if I get p6 URL, server name opens http://servername:7001 / p6

  But I am not able to connect. (I'm not able to extend the button Advanced also to see the name of the database).

  I think that P6 does not connect to the database. (Our database is available on another machine and I can ping this machine server request P6).

  Please let me know, how can I diagnose this problem of connectivity.

  
  

  On the server where P6 is installed, run the dbconfigpv.sh/cmd again and reconfigure the database connection. Also, run adminpv.sh/cmd. Login with privuser and check the connection to the base there. Test to verify that it is able to connect to the database. If you change any setting then restart weblogic server for the change to take into account.

• PHP and MySQL Connection problem

  I'm doing a PHP MySQL on a connection to the remote server in Dreamwesaver CS3.

  When I enter the information (host, user, password, etc.) and hit TEST, I get the following error message.

  "Access is denied. The file exists may not, or there could be a permission problem. Make sure you have permission on the server and the server is properly configured. »

  I know how to work the user, password, etc., I can access the MySQL database with other software.

  I checked with my host and they say that there is no permission problem on their end.

  I checked the settings on the Test Server page in the configuration of a Site and everything looks correct and works there.

  I've seen this particular problem described in other messages of the forum (even if there are a LOT of comments on this topic!).

  Any help would be appreciated.

  pabirds, I had the same problem. Here's the solution that worked for me:

  1. make sure that you have clicked on the tab Advanced in the Definition of Site pane, and then

  2. Select testing serverin the list on the left side of the pane, and then

  3. set Host FTP on host your site, your e.g. ftp.yoursite.com or ftp.yoursite.eu, then

  4. set the host directory according to the hierarchy of your hosting service, it will probably be something like: areas / www / htdocs or /. To determine this, when you have window Dreamweaver files open in two columns, expand the root of your site. Then

  5. set your prefix on the URL of the root of your site, then your example http://www.yoursite.com/ or http://www.yoursite.eu/,

  6. use your connection user/pass combination.

  I my case, step 4 has been the cause of my sudden increase in gray hair and elevation of blood pressure.

  hope this helps.

  speedingyeti

• NB200-10Z - WLan and Lan connection problems

  Hello

  all I bought the NB200 & I'll put up the wireless connection. Everything seemed fine, but now I'm in trouble.
  On the network connections page, it shows the network connection wireless as "not connected".

  On the Network Setup Wizard, it shows the connection of wireless (atheros AR9285 adapter) & the connection to the LAN (Realtek) but says that they are disconnected.

  Any advice on where to go next would be very appreciated. (FYI, the modem is Speedtouch ST585)

  Matt

  Go to this page:
  http://APS2.toshiba-tro.de/WLAN/
  Update the WLan driver.

  I m not a NB200 owner but one of my friends has a NB300 and there was an option in the BIOS which enabled and disabled the Wlan
  Check in BIOS if this option is available in your case too

  Keep in mind that you use the right SSID, encryption right, the right encryption password and disable the MAC on your filtering router.

  Welcome them