WARNING - Version Preview + T60p = Fail

Similar Questions

• Try to download the free trial version DC Pro: failed with exit code: 3010

  Try to download the free trial version DC Pro: failed with exit code: 3010.  He started downloading but never finished.

  NEVERMIND, I retried and it seems that he terminated normally.

• warning "RAM Preview has 2 or more images" after audio cleanup after effects CC 2014 (13.0)

  The After Effects team are investigating a bug in after effects CC 2104 (13.0) where a memory leak during audio cleanup (hold CTRL or command all rubbing). This leak memory can possibly consume RAM everything is free, which can cause the warning message "after effects error: Preview RAM 2 or more images for reading needs" when you try to open a RAM Preview.

  
  

  While we look at this problem, you can prevent the leakage of bug and memory is not a cleaning with audio. In case of problems you can solve it by closing and restarting After Effects.

  ER-scrubbing-audio-in-after-effects-CC-2014-13-0.html http://blogs.adobe.com/AfterEffects/2014/07/Warning-RAM-Preview-Needs-2-or-more-frames-AFT

  Note that this bug is listed as fixed in the next update:

  http://Adobe.LY/1pFGGRE

• Compatibility issue then that go back to xp version preview of windows 8

  I installed windows 8 preview version, but now I want to go back and install xp, but its display compatibility problems. Any method how to solve this problem?

  You must boot from the Windows XP disk and do a custom installation:

  Reinstall Windows XP
  http://michaelstevenstech.com/cleanxpinstall.html

• Sourcefire Defense Center Upgrade version (local installation) failed

  Hi team,

  I had a problem during the upgrade of our CME to 5.4.0.

  Alerts

  Task notification

  Task status of your version upgrade of defense Center S3 task installation Sourcefire 3D: 5.4.0 - 763 (local installation) failed in the sea 25 09:46:02 Nov 2015

  Could not update the State: DB connection has been lost prior: new loading database...

  Hi John,.

  This error appears rarely. It is a known issue: CSCze94563

  Reference: https://tools.cisco.com/bugsearch/bug/CSCze94563/?reffering_site=dumpcr

  I just edited the bug to contain more information. It may take some time to reflect it.

  The task status page can present the error above, however, the help > on of interface user page indicating that the system in question is running version 5.4

  You can also view the logs to confirm this.

  Cat/var/log/sf /<5.4_upgrade_directory>main_upgrade_script.log

  The last line should read "success, removed the upgrade lock.

  Thank you

  Guillaume

• Overview Windows 10 Insider: update to version 1606, 14366 fails under Fusion 8.1.1

  I said setbacks trying to upgrade to the last Insider glimpse 10 Windows.   All update files appear to download, the installation starts, the virtual computer restarts, but then I see a brief flash of a saying of the screen "restore your previous version of windows."

  Windows Update / history shows "upgrade to Windows 10 Insider Preview, version 1606, 14366: cannot install 08/07/2016"-what has now happened 5 times in a row.  I've cleaned the disc VM to make sure there is enough free space.

  Edit to add: display error code is 0x80240fff

  Post edited by: mdiehr

  Well, I have no idea of what I did, but after the 5th attempt, this time it worked fine.  So maybe if it does not work for you just keep trying?

• Warning version of process delete LR4?

  I work in a studio where we use a DNG - prepress DNG file delivery workflow. We are currently upgrading to LR4 to support some new cameras. Long story short, our prepress provider use PSCS5 (and ACR 6.7) which means that we need to keep our work in the process of 2010 for the foreseeable future.

  Because I'll stick with process 2010 for awhile, is there a way to turn off / disable the version of exclamation point warning bit?

  I'm afraid that you are caught in between, and the only solution is to either go back to Lightroom 3, have your printer upgrade source to CS6, or to provide your printer with TIF images.  If none of these options are acceptable, you tolerate the annoying message.

• RoboHelp HTML version 9 edition failed to connect to RoboHelp Server 9

  As an administrator for our RoboHelp Server (version 9), I created "Author" rights of access for a person.  This person is a technical writer who works remotely.  He tried to publish his Office RoboHelp HTML (version 9) to our RoboHelp Server software, but has encountered an error in publication. What is causing this error and what would be a solution to this problem?

  A screenshot and the text of the error is listed below:

  WebHelp Pro

  The publication has been cancelled.

  The connection has failed.  Please check the connection and post it again.

  Native error. Not allowed.

  BTW, in the setting of the screenshots, it is best to use the camera icon, you see in the toolbar when you write your answer.

  My guess is that some kind of configuration of the authorization was missed.

  It is also difficult to know where to start because the author is "remote." What is VPN? Or remote desktop or what?

  I'll start with the obvious.

  It could simply be that when the author generates the SSL Pro of WebHelp, the Edit Destination dialog box may be incomplete. I myself did fill the news shows this screenshot, I forgot to choose a box help or put in a wrong password. So, definitely check this first.

  

  Then, you or your administrator must check the user account, group and the area of the author is correctly configured.

  This screenshot shows that a group was created (in this case, called authors) and individual users have been assigned.

  

  Finally, the Group of the authors must be assigned to a region and publication rights .

  

  You can also watch this thread dealing with similar issues and solution.

  http://forums.Adobe.com/message/4162467#4162467

  After that, it might have something to do with the remote author permissions to access the destination of publication (the machine that RoboHelp Server) from a remote location and has nothing to do with the side of RoboHelp permissions!

  That's the best I can do where I sit. Let us know if solve you the problem.

  John Daigle

  Adobe Certified RoboHelp and Captivate instructor

  Evergreen, Colorado

  www.showmethedemo.com

• Update to the latest version of iTunes fail...

  I recently bought an iPhone 6 s more. Then when I tried to plug in my computer (Windows 7 64-bit), it said on my iTunes I need to update my iTunes to the latest version. So I installed. But when I try to open my iTunes, it always pop up on my screen (photo attached). So I need your help guys.

  

  This type of error can be fixed by removing the offending dll, then fix the component it is programs and features Control Panel. CoreAudioToolbox.dll belongs to Apple Application Support and can normally be found in:

  C:\Program Files\Fichiers Files\Apple\Apple Application Support or

  C:\Program Files (x 86) \Common Files\Apple\Apple Application Support.

  For general advice, see troubleshooting problems with iTunes for Windows updates.

  The steps described in the second case are a guide to remove everything related to iTunes and then rebuild what is often a good starting point, unless the symptoms indicate a more specific approach.

  Review the other boxes and other support documents list to the bottom of the page, in case one of them applies.

  More information area has direct links with the current and recent buildings if you have problems to download, must revert to an older version or want to try the version of iTunes for Windows (64-bit-for old video cards) as a workaround for problems with installation or operation, or compatibility with QuickTime software or a third party.

  Backups of your library and device should be affected by these measures but there are links to backup and recovery advice there.

  If the problem persists and you have a 64-bit system try for the old version of video cards which is a 64-bit Installer for most of the 32-bit code, similar to all 64 bit iTunes up to 12,1 versions.

  TT2

• CS6 Prod. Trial versions of Prem fail or crash @ the splash screen...

  .. .with three exceptions; Extensions Manager CS6, CS6 Bridge and Photoshop CS6. I already have a full license copies of the bridge and Ps CS3 on the computer. Is this a coincidence?

  Again, you are prompted for a registration number.

  SpeedGrade does not seem to do anything.

  Premiere Pro and Prelude raise similar errors containing the string:... "shared/adobe/MediaCore/ASL/Foundation/Make/Mac /... /.." /SRC/DirectoryRegistry.cpp-283 ".

  After that the effects fails to launch when it is "Impossible to rename"a file to the user's preferences.

  The others just quit unexpectedly.

  It seems to be a licensing problem, although I am having problems with permissions on the machine as well. This is a new computer.

  Any ideas?

  Did a repair of the permissions of the user, as described here: http://osxdaily.com/2011/11/15/repair-user-permissions-in-mac-os-x-lion/ and now first wanted to launch.

• WARNING pop-up THAT FAILED in SECURITY &amp; PRIVACY

  I was on a website, clicked on a link & immediately got a huge flashing pop - up with print & sound of warning that my computer is locked, & to call a number immediately. Could not close this page, could not close Mozilla Firefox & had to use force to stop.

  I waited a few minutes & then turned my computer back on, ran Malwarebytes scan & clean, then analyzed again. Also ran the first Avast & no problems were detected.

  Is there something more I need to do, or I can sleep?

  Hi LADYSINGER, sounds like an ad especially odious to persuade you to access their paid tech support service. It doesn't look like you have downloaded and run/open/installed all the files. In this case, I think you're probably fine.

  There are a few different page designs, these companies use. In one of them, by pressing the Esc key several times quickly in a row will break the cycle of sign/reload, then you can close the tab normally. Others may behave differently.

• Flash Player Version 11 has failed to the installation procedures and continue to ask for redownload the program including google chrome

  Flash palyer is not installed correctly on wndow 7

  Hello

  You receive an error message when you try to install Flash player?

  Follow the steps in the link given below to troubleshoot Flash player installation and check if that helps.

  Flash Player Help / installation issues. Flash Player | Windows

  http://helpx.Adobe.com/Flash-Player/KB/installation-problems-Flash-Player-Windows.html

• Could not restore Windows 7 after Windows 8 Preview - TM2 version have restore DVD, always fails.

  Hello!  I'm about out of ideas on how to resolve this, so I'll do a summary of what I changed with the machine and then further troubleshooting details on.  The hp touchsmart PC portable individual I is a TM2-1079 cl, product number: WA812UA #ABA.  I got it for the length of 2012, I bought it used another person about 1 year ago now specifically to play with Windows 8, before his release.  Regarding materials real age, I can tell from the warranty information that it was made at the end of 2009, he stated the warranty period was from January 2010 to January 2011.

  Okay, so my story with the OS change goes:
  -> Bought this TM2 in early 2012, ran the recovery partition to wipe it clean from the previous use of owners and he went perfectly well, then a Windows 7 clean installation as if it were new.  I had also made use of an Acronis True Image 2010 boot disk to a hard disk image of the three than other recovery partitions (although I do not understand the freshly installed windows partition 7, thought it wouldn't matter if the recovery could do it's thing right?)
  -> A few days later, I loaded the second of the three Preview versions for Windows 8 above (Customer Preview build I think).   Everything worked well and it doubles starting between the two without problem, as far as I know, the only real made amounted to convert the main partition that Windows 7 was installed on an extended partition and splitting of existing Windows 7 partition everything also 50-50 indoor and extended partition.  She had also replaced the Boot Manager / bootloader which was there before, but once again not surprised.
  -> When the build of the Preview version was released over the summer I did an update from inside windows 8 and all seemed well again.  Change between builds two preview has developed a problem where I could not stop windows 8 without a handful of error boxes poping up to the top, but I'm pretty sure that was unrelated.
  --> More recently about time thanksgiving, I decided to give the laptop to a family member with an archiac office who has had problems and updated factor of old general who in fact does not.   This person is quite unfavorable for change so that everything "Win8-vs-what people are used" comes into play.   I decided to erase the TM2 clean to the BONE it comes with.    Here's where I'm stuck now:

  => Before doing anything I did a just incase, glad I did another true picture of the HARD drive.
  => I have tried F11 to load the recovery partition to see that, because of the bootloader be tampered with by Windows 8 it is really not to the HP recovery partition more while it is still on the hard drive.
  => Captures the image of hard drive since the beginning of the year with the partition recovery on it until windows 8 hit the machine, cleaned the hard drive completely, restored the disk image.   I could now enter HP recovery fine but...
  => I got a dialogue mistake right off the bat, saying that the recovery partition could not install and insert me CD 1 of recovery of education software.  Well I never did the dvd myself with the single use burning star when it worked so that is out and I did not buy the disks on the HP support site.   At this point I'm stumped, but why the recovery partition cannot install despite the computer load up in recovering very well.  For example, command prompt in the Windows PE environment is functional and all files seem to be present.   Maybe some checks as the recovery partition is not pirated could have been triggered by hard drive imaging, I'm really not sure?
  => I did then used the image of HARD drive, I had just created before trying it and restored the other copy of the reader (bootloader altered Win8, Win8 version preview, win7, the inaccessible and all recovery partition).   Windows 7 and 8 - RP can still start.   Google a bit on the recovery partition key (F11) is dirtied by Windows 8 and came to find that I had to only salvage value as the partition "Active" so he can start.  Sure, I have to start but I'm running into the same issue, where the real recovery partition loads but now refuses to start the process of restoring without HP dvd.  Because I know that for some it worked months ago I guess that once more, because I ended up restoring this version of the recovery partition it may also declared himself tampered with... great.
  -Online planned what to do a little and then finally just ordered the DVD from HP in December, I had specifically recovery DVD for my model and they weren't from HP directly, not second hand on ebay or another person.  Wasn't really that bad, $16, very reasonable price.  Should be just, legit OEM DVD to use?  Nope...
  => Came the DVD.  Two main recovery disks and a third for applications and drivers.   Start with disk one and he says is formatting the drive how he wants (good, I love it so far), copy all the content of the three disks on the hard drive and starts his reboot and install cycle.    Restarts a handful of times, you can tell that well after the copy of the content of the any disk and installing windows.  You see the logo Windows 7 boot a few times and even the standard background 'prepare your things' which is similar to the Windows 7 login screen.  The screen becomes certainly as far as the driver proper (and others I guess at that time here) such as changes in native resolution for LCD of the TM2 towards the end.
  -Online all of a sudden on the 3rd or 4th (I think) reboot of windows setup begins for a while then said stop, it restarts and it is back in Windows PE installation of recovery again (this time from the hard drive, not the DVD) and says that it has failed to restore and offers to start over from the beginning.

  This is where I am stuck.  The recovery Partition died on me post-Windows 8 and the official HP recovery DVD fail to me (and curiously they you apparently miss you in all stages of restoration windows 7, well after the DVD themselves are are most read from).

  > Question 1: is the "self-destruct" HP recovery partition if he gets imaged hard drive imaging software and restored?  I can confirm mine worked fine and then died after after crossing Acronis True Image.  Another possibility is that perhaps there is a certain ID or the tattoo of the hard disk or specific partitions that was lost when Windows 8 put his recent bootloader into the machine or lost of Acronis?  It's always the hdd oem supplied with the computer, it has not been turned out.
  > Question 2: are there known issues with the official recovery of Windows 7 DVD s for an end TM2 2009 1079 cl?  I also know the recovery of Cyberlink software fix / preinstall disc and tried this with results that were not different in without it.  That said, my machine has the version of the recovery software Cyberlink, I read something as software from 3 different companies for recovery depending on the period of time the laptop was manufactured and sold.
  Reference: [ http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?cc=us&lc=en&softwareitem=pv-80183-1 ]
  > Question 3: clearly asked, what now?  Another thing to try or I have to go find a disc of windows 7 RTM and snatch all the zippers of all pilot?  (Quite hoping to avoid this, I'm actually curious enough to really understand what happened here and that will work he answered nothing.)  hehe).

  Perhaps of things this way: some research led me to believe have the WLAN switch off at the beginning of the recovery causes the driver to flip out (and win7 seems indeed dropping dead during the last steps of the installation of the driver) however it is not possible it seems to activate the wireless card 'on' before that point.  Switch do even when active state.   As I have already mentioned the recovery of Cyberlink software patch has no effect on things.   No parts have never been amended in this machine, the original hard drive, the wireless network card, modules, ram ect.   I doubt that the motherboard bios / firmware has never been States machinery, update is revision F.02.

  I have at my disposal:
  Much time, in fact, hense why I really want to know what has happened and do not use the disc of Win7 RTM.
  * disk hard recovery HP before addressed Win8 image machine.

  * disk hard recovery image after Win8 and a little bug, but still bootable Win8-RP.
  * The correct recovery DVD for my laptop HP-directed, ordered recently (December 2012).
  * Enough confidence to play with score editing tools would it be a suggestion, never really used much outside of gparted on discs live linux however.  In view of the current state of the machine there is nothing to lose much more than to risk.

  Sorry for the wall of text!  I love being very detailed!

  I actually had, pretty much on a whim of 'eh, might as well try it' too!

  So I told him earlier that it seemed obvious that most of the recovery completed well, something just kept arye until reset all cycles of the overall configuration process.   Seemed as if drivers were causing a problem because the display driver had obviously just finished installing a few moments before the final restart dead-end.  There was a lot of forum discussions there on different models of HP laptops, who need the wireless card to be placed in 'market' or restore might fail completely, I tried but the TM2 does not really allow you to change the WLAN State of 'off' when the operating system has already recognized (as in bios menus and windows install ", it stays just off even if you hit the switch).

  I decided to try pulling the mini-pcie card out of the machine completely and from configuration on and... It worked!  I had throughout a fresh Windows 7 and he even recreated my recovery partition correctly!

  Check in the C:\SwSetup\ directory after the installation was made, I found all the other drivers and a folder called 'WLAN', which was empty.   I guess that means if recovery is not material, then they choose even not copy the data to a certain device driver.   Because it was not present, everything that's wrong with installing drivers during recovery wireless cards never crashed the recovery all!

  I wonder if there isn't something wrong with the wireless card in my TM2 in all honesty.  I had a problem with it along since I got a year ago in this radius of reception was terrible and if I went that areas of the room of the wifi point he was likely to win.   Having said that it worked then I ignored it before.   Maybe the card is gone belly up and install recovery is not just installation to recognize errors in nonlethal pilot since the WIFI network?  He would fit with other peoples problems when WLAN is turned off as well at least.

  ---

  As a separate note, since the new year I've updated my personal machine (a HP DV6T) for one SSD and (without erasing my old HDD), I decided to try acronis imagery on this cover of machines and other partitions under Windows 7 itself for the SSD.   Of course, the same question appeared, recovery would not launch without the DVD.   Apparently Acronis True Image just cannot successfully restore HP to an image of partition recovery.   I don't pretend to know why but while the real partiton returns through restoration and environmental WinPE is running the effective recovery certainly does not aftering through an image .tib in the case of two separate HP machines.

  ---

  (For googlers who think so), these are two of the three questions, which I came across while doing this resolved and everything that I'm going to worry.

  > Windows 8 Preview mess with bootloaders, breaks recovery, I didn't figure out how to restore it.
  > Do not rely on an image of hard disk from the recovery partition, even if you can restore the partition and it opens to black recovery menu window it can still fail and ask the recovery dvd.  The recovery partition disk imaging is risky!

  > If your HP recovery (partition or dvd, or another) dies near the end of all this and turning on/off WLAN is not helping, try ripping off the mini-pcie for the restore time card and then reinsert once you return to an operating system clean, everything worked for me!  For reference, I don't know what model of wlan card that is exactly, but it's a Broadcom 802.11n adapter (HP alternative number? Not sure) SPS: 593837-001.  The driver will not be C:\SwSetup\ after the installation as the dvd won't copy out but plug in ethernet, windows update finds it easy.

• TB update fails and I get an error of access denied to 7 - Zip when you download a new version.

  Thunderbird was not able to update from version 24.6.0 (under Windows 7). Whenever I try to auto update, it tells me that the update fails. When I let the updater download a full version, which also fails. When I try to download a new version manually, during the extraction process, I get an error message indicating "7-Zip" up and "Access denied" in the window. I followed all the suggestions to the support download error page (as an administrator, stop the process of Thunderbird, etc.), and none of them solved the problem. Any other ideas?

  What firewall / anti-virus software you are using. My guess is that the firewall or the anti virus software blocks both the update and full installation because it contains ZIP files. I have not heard that outside the paranoid company / parameters of business in the past, but there's always a first time.

• Failed Application spoolsv.exe version 5.2.3790.4759 failed module ntdll.dll version 5.2.3790.4789

  I have several printers installed Windows 2003 Standard Edition Server. Canon and HP. I noticed when I remote through Windows Remote Desktop my spooler is down and in the event viewer, I saw the following message

  Failed application spoolsv.exe
  version 5.2.3790.4759
  module failed Ntdll.dll
  version 53233790.4789
  failing address 0x0002a5a4

  Hi BDain,

  Your question of Windows is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please post your question in the TechNet Windows Server forum.

  http://social.technet.Microsoft.com/forums/en-us/winserverprint/threads