Was working fine, today, super slow, freezes
I am running windows 7, 64 bit, 6 GB ram, core i7. Yet CS5 ran great for months. Today is super slow, freezes. I can't think a good reason for this. Any thoughts on how to fix?
Also, I opened another project, and all went well. If this project is damaged in some way, is it an effective way to rebuild? It is a complex project or your time faily. I have started and restarted several times.
Thank you
Lisa
I feel that still is preferred least Adobe programs.
Was still built on the sonic program, and I think that parties substantial still. I think Adobe has a big bullet to bite if they ever were to rewrite the program in their own. We also forgive many of the oddities on this basis, but I also believe that many recall is also now Adobe code. It's certainly the most problematic of the Adobe programs I use.
Here's another question, I usually customized road my buttons. I noticed that when you edit in photoshop, it changes the flow of the buttons. I suppose that it leans on the order of the layers, but appears not to be the case. Can someone explain this for me? This is getting tiring setting routing over and over.
I'll try to find the wire last week where we did several tests of this. Once the menu added in again, the stacking order of layers in photoshop (or elsewhere) has no effect on the NUMBER of button. And the number of the button which is the key element in the delivery. If you have automatic number and you don't do anything in yet (and you can do it in PS) to change the number of the button, nothing should change in the routing. This will cause the problem is moving buttons around so that their positions are different.
The follow-up of the specific changes that you deploy in the PS, and I'll see if I can help you understand why the routing changes.
I changed the automatic routing preferences, and I like automatic routing now. But I use very predictable menus in words where align the buttons.
Tags: Encore
Similar Questions
-
iMac 10.11.3 continues trying to not start, no chime sound, gray with Apple logo screen, stays for about 5 to 7 minutes, then tries to start again. It was working fine earlier today.
It will start in recovery?
-
Logitech webcam was working fine before, but now it isn't there at all.
the thing is my webcam was working fine before. In this sense, there was an adequate software and it opened well... So I don't know... I did not open this during a few days and today when I see that I was not able to find it at all... all first I thought that it was not grateful but den I realized that is... cuz its der in Panel d. And when I looked up the location and everything he showed me that one icon but dat thing opens at all my webcam C270 HD model if dat can help...
Logitech has webcam drivers for your webcam. uninstall the software from Control Panel and reinstall from here
http://www.Logitech.com/en-GB/support/HD-webcam-C270?section=downloads&bit=32&OSID=23&file=http%3A%2F%2Fwww.Logitech.com%2Fpub%2fvideo%2Flws%2Flws251.exe
-
Photoshop elements editor 14 was working fine, all of a sudden it does not, even if I turn off my mac. Why?
Today I got the help of Adobe's Support team, and it was excellent. Everything works perfectly now. Thanks, John for trying to help anyway.
CONCERNING
-
Printer was working fine and then stoped feeding. I found a small gear broken wheel on the stack of paper.
Well, your printer is broken. If under warranty call HP.
-
STD R2 Windows Server 2012 was working fine this morning by restarting the server now, we get the error to Choose your type of keyboard
Hello
Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.
http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer
See you soon.
-
original title: fallout3
Fallout3 and Broken Steel, Point Lookout was working fine in windows7 ultimate 24 hours ago now all of a sudden after loading when I hit continue it crashes, Intel processor Core i3-2100 3.10 GHz (Sandybridge) Socket LGA1155, Asus AMD Radeon HD 6770 DirectCU 1024Mo GDDR5 Mushkin Silverline #991768 4 GB (2x2gb) DDR3 1333 MHz 9-9-9-24, thanks in advance, Morgan
Hello
1 did you change on your computer?
2 did you receive an error message?
Fallout 3 is not compatible with windows 7. See the below link for the same thing:
Method 1:
You can even check this link: make sure to run older programs in this version of Windows: http://windows.microsoft.com/en-US/windows7/Make-older-programs-run-in-this-version-of-Windows
Method 2:
However, start your computer in a clean boot state, and see if that fixes the problem.
See How to solve a problem by performing a boot in Windows Vista or in Windows 7
Note: After troubleshooting, make sure that you configure the computer to start as usual as mentioned in step 7 in the above article.
-
I have a Mac my HP 1022 was working fine all of a sudden I get a message "your printer is not connected" HELP
check the Cable Connection, if you have another pc conect printer to it and check if everything is ok.
-
I D:\My Documents in my office. It was working fine but all of a sudden I said access denied. If restore system 2 or 3 days before this date my document becomes available. How can I solve this problem. I have a user and admin in this system. But the user has the power to admin. I use Windows XP.
Hello
· Were there any changes made on the computer before the show?
· Who is the service pack installed?
Follow the steps from the link below when you receive the error and check to see if this helps: how is ownership of a file or folder in Windows XP: http://support.microsoft.com/kb/308421
-
Code.10; Cannot start your device - CD/DVR, it was working fine until I did a windows update and it stop working.
Original title: code 10
Hello
Read this link which has also a few solutions:
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104/--------------------------------------------------------------------------------------
Step 1: Please do all the same underneath if you did some before as is often total
a process that solves the problem.Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
below.
Then, work your way through these - don't forget the drive might be bad, could be a coward
cable or slight corrosion on the contacts (usually for a laptop) and other issues.Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.microsoft.com/kb/314060 - a Mr FixitTry this fix manually if the Fixit 314060 does not work
http://www.pchell.com/hardware/cd_drive_error_code_39.shtmlYour CD or DVD drive is missing or is not recognized by Windows or other programs-
a Mr Fixit
http://support.Microsoft.com/kb/982116The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
for Windows Vista
http://support.Microsoft.com/kb/929461When you insert a CD or a DVD, Windows Vista may not recognize the disc
http://support.Microsoft.com/kb/939052Your CD or DVD drive cannot read or write media - A Mr Fixit
http://support.Microsoft.com/GP/cd_dvd_drive_problemsCD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
Vista installation after booting from the DVD (AHCI)
http://support.Microsoft.com/kb/952951
Drive CD - R or CD - RW Drive is not recognized as a recordable device
http://support.Microsoft.com/kb/316529/Hardware devices not detected or not working - A Mr Fixit
http://support.Microsoft.com/GP/hardware_device_problemsAnother possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
ends. Remove and replace, do not just tight. For laptops, you can often clean power and
contacts data with a pencil eraser.Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
manufacturer of device to see if there is a firmware or drivers for your drive if necessary.===============================
Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
do it right.Did you follow the Troubleshooting Guide for the reader who still does not work? There are
the entries in registry that the troubleshooter does not solve and those who "might" be the cause.Check with your Maker system and a device for the two possible firmware updates and
the correct registry entries for your car.Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
the parameters.HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE
HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
-----------------------------------------------------------------------
You can probably find more info here and maybe even the exact registry for your CD/DVD settings
drive from someone with the same model.Forums - a lot of expert real help
http://Club.myce.com/CD/DVD units
http://www.myce.com/storage/Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
nothing change) - find the DevManView device and then make a right click on it free in RegEdit.DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
devices and their properties in flat table, instead of the tree viewer
http://www.NirSoft.NET/utils/device_manager_view.htmlI hope this helps.
Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">->
-
My Goggle voice chat was working fine, then one day it just stopped. I tried to reload, but all I get is error 1603... can someone help me with this? I use Windows VISTA
Hello
· What is the exact error you are getting?
I suggest you follow the link and check.
How to troubleshoot issues that may occur when you install, uninstall, or upgrade one program on a Windows computer
http://support.Microsoft.com/kb/2438651
For more information I would suggest you follow the link.
http://www.Google.com/support/chat/bin/static.py?page=known_issues.cs
http://www.Google.com/support/chat/bin/answer.py?hl=en&answer=162044
-
Hi, can anyone help? My wireless was printer was working fine until what I used it to scan - and needed to use a cable to do so. I can no longer print wireless, Iv'e disconnected from the PC to the printer as cable seemed reasonable. What should I do? Thanks in advance
What printer you are using?
-
My computer says my windows is not authintic but I know that this is what is wrong. I have on my another desktop and it works find but not on my labtop. It was working fine before.
A single license is a single Installation.
See you soon.
Mick Murphy - Microsoft partner
-
My HP8600 Wireless will not print. It was working fine. Now he tells me offline. The offline icon is disabled. I unplugged the printer and the router. This does not solve my problem. Help
Hello
1. have you made changes on the computer before this problem?
2. do you get any error code or error message?
I would suggest trying the following methods and check if it helps.
Method 1:
Run the HP print diagnostic utility and check if it helps.
Method 2:
Run the fixit from Microsoft Fixit article and if that helps.
Problems printing and printing errors:
http://support.Microsoft.com/mats/printing_problems/
Method 3:
Try the steps in the following Microsoft article and check if it helps.
The new status of the printer is "offline" after you remove a print queue and then restart a Windows computer: http://support.microsoft.com/kb/2027593
Method 4:
Try the steps in the following Microsoft article and check if it helps.
Printer in Windows problems:
http://Windows.Microsoft.com/en-us/Windows/help/printer-problems-in-Windows
And also see the following Microsoft Technet article.
Hope the information is useful.
-
My printer was working fine with Windows 7 Home Edition, then it stopped, magenta and yellow print. Ink tanks are full. What bad past and how to fix it?
If you are sure that the ink cartridges are full, then try to re-seats and cleaning the heads - http://kbsupport.cusa.canon.com/system/selfservice.controller?CONFIGURATION=1011&PARTITION_ID=1&secureFlag=false&TIMEZONE_OFFSET=&CMD=VIEW_ARTICLE&ARTICLE_ID=8783
If all goes well.
Maybe you are looking for
-
iCloud is so slow recently that it is almost unusable
I even recently touched by a very depressing experience with iCloud. What is happening is that it's so slow, and I'm sure that my internet connection is fine. The problem bothers me, it is especially the photo library from iCloud, on my iPhone, my ol
-
Analog triggering on PCIe-6251 using BNC-2120 on Mac Pro?
Hello all- There, does anyone know how an analog trigger using a PCIe-6251 card connected to a box of BNC-2120 interface? I am running LabVIEW 8.6 on a Mac Pro OS 10.5.6 and my VI of analog data acquisition seems to work but hangs up waiting for a t
-
I have windows xp family. How can I get outlook express6 work with it
I have windows xp family. When I was connected to a dial ISP I was able to use outlook express 6, now I have dsl connection outlook won't send my messages
-
This application is not configured properly, maybe you should try to reinstall
This application is not configured properly, maybe you should try to reinstall. He says this even if it was just installed, or was not yet installed. How can I fix it? His allusion to a Bethesda game. But I think that the issue is much more than that
-
Use the ethernet port to connect a pc
Hello I intend to use my raspberry pi to do some projects, but is not close to the router (needs thought Ethernet connection - and before anyone asks I'm not able to use a wifi dongle to connect because of the requirements of the project size wise),