Windows Server 2012 Remote Desktop "flicker/crash.

Similar Questions

• For MS WIndows server 2008 Remote Desktop does not work.

  Hello

  We have the following.

  1 VMware 5.5 Vsphare

  2 virtual MACHINE working with MS Windows 2008 ent.

  3 SAP on this server load balancing.

  4. his joints to a domain

  Now, we have enabled RDP and used a user can access to hold off.

  but when we take RDP and entered the IP address on the server mentioned above. It gives the error that the RDP is not activated.

  What we did...

  1 checked any local policy or domain... no problem

  2. check that the RDP port is listened to... no problem

  3. has changed the port 3389... nothing happened.

  4. check for any firewall issue... Order the Windows Firewall... Still nothing...

  Checked port 3389 with telnet... its not going is not to...

  Help, please...

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Remote access Windows Server 2012 through internet with desktop connection

  Summer messing about with it for days and don't get no love.

  Try to connect with Windows 7 Ultimate edition to Windows Server 2012 Data Center version from outside my home network, Starbucks or McDonald's or my server at home.

  Tried all these steps found in this promising and useful article:

  http://Windows.Microsoft.com/en-us/Windows7/allow-remote-desktop-connections-from-outside-your-home-network

  1. Allow connections to the computer you want to access remotely. DONE - ADDED to THE SERVER AND NON-ADMIN ACCOUNT to RDP GROUP of ROLES, using network level authentication. Connection of Win 7, so this method of authentication should not be a problem, I assume.

  2. Make sure that remote desktop is able to communicate through your firewall. DONE - FOR BOTH PUBLIC AND PRIVATE RULE.

  3. Find the IP address of the computer on your home network you want to connect. MADE - by using the ipconfig/all command

  4. Open your router configuration screen and worms forward port 3389 for TCP IP address of the destination computer. DONE - NOT TCP/UDP but TCP only, internal and external port goes. Note: The use of a booster signal wifi at the end of the House, it is a problem that requires additional configuration? I don't think he has an ip address or acts as a router. But in desperation I can try unplugging then again head the local Starbucks to try to connect.

  5. Find the IP address of the router so that the remote desktop can be found on the Internet. DONE - using "what is my ip", pretty easy.

  6. Open Remote Desktop connection, and connect. ACTUALLY, I think THAT, IN ENTERING [ip router]: 3389.

  But the result of the message is always the typical:

  (1) remote access to the server is not enabled.

  > But this is not true, that I am capable of the DRC at home on the server machine.

  (2) computer remote is not off.

  > But this is not true, as I just left home 30 minutes and sometimes it's rarely, only restarted.

  (3) the remote computer is not available on the network.

  > Don't know what that means. Of course the remote computer is not on the network, I am on right now. It's on my home network. But I can ping my router ip via cmd, then coming to the outside can be done; through my router, I should be able to access inside my home network port forwarding w. But no love.

  So... what to do, what to do...

  The wifi booster is a problem?

  Connects to the Data Center edition a problem?

  What happens if I uncheck the option ' use authentication NLA, is that the passage of the security risk?

  Any ideas about the configuration I could be missing before giving up and go for VPN or TeamViewer. I would really like to see materialized during all the time that I put in trying to run the DRC.

  Thanks for any input.

  / Markus

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• VS 2012 Windows 7-based Application crashes on Windows Server 2012

  A generated application on a Windows 7 machine does not work on Windows Server 2012 but works fine on other desktops.

  An exception of type "attempted to read or write protected memory. It is often an indication that other memory has been corrupted. "is thrown.

  When I debug using remote debugging on the WindowsServer2012 machine and the build computer, I see that this exception is thrown in a place where is he called kernel32 HeapSize in code.

  It's the exception log that WinDbg shows:

  

  Any idea what could be going wrong?

  Hello

  Your question is beyond the scope of this community.

  Please post your question to the MSDN Visual Studio Forums.

  https://social.msdn.Microsoft.com/forums/vstudio/en-us/home?category=VisualStudio

  And/or the Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Remote assistance with vWorkspace 8.0 MR1 on a Windows Server 2012 R2 with Windows 7 Enterprise VDI (RDP8)

  We have a new VDI environment with the new Version of v 8.0 MR1 Workspace and real fixes. The connection Broker and the Hyper-V hosts running on Windows Server 2012 R2 Standard with real fixes. The VDI Clients are configured with Windows 7 Enterprise and RDP8. Unfortunately, we are not able to use by the broker for connections Remote Assistance?  We received the Error Message:

  The following error occurred during the occultation session 2 on the server...

  This function is not supported on this system. (120)

  I found the link: http://documents.software.dell.com/doc78042 or

  http://documents.software.Dell.com/DOC145926

  But this article has no recommendation for Windows Server R2 Standard 2012

  Any help, I would be grateful.

  THX in advance

  Thomas

  This question is not met at the time of the request

  I created a Blog post to allow other servers to 2012r2 2012r2 of remote assistance.

  However, it is not possible to use 2012r2 to help a win7 server remotely. It is simply not supported by MS and there is nothing we can do.

  If you can create a server 2008r2 to run the Management Console, you will be able to assist distance Win7 VDIs from here.

• Install OfficeJet Pro 8610 on Windows Server 2012

  Hello

  I'm trying to install the drivers for a Pro OfficeJet 8610 on a system running Windows Server 2012. I installed the drivers from here (after choosing Windows 2012 for the operating system): http://support.hp.com/us-en/drivers/selfservice/HP-Officejet-Pro-8610-e-All-in-One-Printer-series/53...

  First of all, I tried to install using the GUI (Setup.exe) but ran into an error indicating that the operating system was not compatible.

  I did some research and discovered that these drivers must be installed by using the command line and the command msiexec.exe. I tried to do it by using the following command-line (with administrator privileges): msiexec.exe /i PATHTOMSI

  However, when I do that, it gives me ALWAYS an error of incompatible operating system. Don't know what to do here.

  Here is a link to the Post on the HP Forum explaining the need for a command line install: http://h30434.www3.hp.com/t5/LaserJet-Printing/installing-Pro-8610-Windows-server-2008rt-X64/m-p/426...

  Thank you.

  I ended up soliving this problem myself while tinkering around.

  I went through the process of adding a new printer through the devices window and printers.

  I said my printer was not listend so opted to manually configure a printer. I have created a new local port and he just called the name of the printer. He then invited for drivers. I chose the disc and then navigated to the folder where I had extracted the printer drivers. Selected this file and the drivers installed.

  This example gets the drivers installed in the system. Windows should then automatically recognize/install the printer if it is plugged.

  Mind you, I had to do that only for printing on a desktop connection remote. If you need the real HP software installed to print AND scan, this will not work for this.

• Need to buy R2 Windows Server 2012

  Hello

  I have a small business and want to host and manage my own website.

  I downloaded and tried the trial version of windows server 2012 R2 and continue with it.

  Looking at the structure of the price that I got confused there are several option about the licenses.

  All I need is to manage

  1 - My Web hosting to businesses.

  2. DNS management

  3 - remote Desktop to connect to the server.

  Please can someone advise what would be the best option for me to buy the server without spending too much money.

  Thank you

  Server issues are better managed to the:

  TechNet forums - Windows Server 2012 General - Microsoft

  Kindly ask here.

• Windows Server 2012 lost connectivity

  Hi all

  I created 6 virtual servers Windows Server 2012 R2 Standard. However, there are 2 weeks 3 to 6 servers randomly lost connectivity (ping returned request) outdated, unable to control remotely,... several times until I have restart servers, connectivity was back. Even if 3 other servers do not have this problem.

  I found the following error events in the event viewer, I don't know if they cause this problem or not:

  Log name: System
  Source: Schannel
  Event ID: 36888
  A fatal alert is generated and sent to the remote endpoint. This can lead to the termination of the connection. The defined protocol TLS fatal error code is 40. The Windows SChannel error state is 252.

  Reference: https://msdn.microsoft.com/en-us/library/windows/desktop/ms678421(v=vs.85).aspx

  -------------

  Log name: System

  Source: NETLOGON

  Event ID: 5719

  This computer was not able to set up a session securely with a domain controller in the domain GHPFE because of the following:

  Currently, there are no available connection server to process the logon request.

  This can lead to authentication issues. Make sure that this computer is connected to the network. If the problem persists, contact your domain administrator.

  MORE INFO

  If this computer is a domain controller for the specified domain, it puts up the session for the specified domain PDC emulator. Otherwise, this computer sets up the session secure at any domain controller for the specified domain.

  Reference: https://support.microsoft.com/en-us/kb/938449

  Microsoft warning serious problems can occur if you modify the registry incorrectly by using the registry editor or by using another method. These problems may require that you reinstall the operating system. Microsoft cannot guarantee that these problems can be solved. Modify the registry at your own risk.

  -------------

  Log name: Application

  Source: CAPI2

  Event ID: 4107

  Has not taken from the root list third-party auto update cab at: http://ctldl.windowsupdate.com/msdownload/update/v3/static/trustedr/en/authrootstl.cab> with error: these data are incorrect.

  Reference: https://support.microsoft.com/en-us/kb/2328240

  -------------

  Log name: System

  Source: Client DNS events

  Event ID: 8015

  The system cannot save the host (A or AAAA) resource records (RR) for the network adapter

  Reference: http://support.simpledns.com/kb/a182/system-failed-to-register-host-resource-records-rrs-network-adapter___-warning-windows-event-log.aspx

  -------------

  Log name: System

  Source: Group policy

  Event ID: 1054

  The processing of Group Policy failed. Windows could not obtain the name of a domain controller. This could be caused by a name resolution failure. Check your service provider Internet (DNS, Domain Name System) is configured and working properly.

  Reference: https://support.microsoft.com/en-us/kb/324174

  Microsoft Cause: This problem may occur if the address of a preferred DNS server configured on the client is invalid or is inaccessible.

  -------------

  Is there anyone know of this problem and the resolution to it? Help, please.

  Thank you

  Khiet Manh

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home

  http://social.msdn.Microsoft.com/forums/en-us/home

• Customers light rdp to windows server 2012

  Hello

  I have a client with a Windows Server 2003 32-bit server acting as a mail server & DC, but also make nightly backups.

  Users run desktop computers as well as laptops at the office, with some of them (sometimes) connect to the network from remote locations.

  I am currently looking at upgrading their environment, in upgrading the server to 64-bit Windows 2012 and add Thin Clients for desktop users, so they can connect directly to the server that will help reduce overhead costs (such as the failure of HARD drive on desktop computers).

  The question I have is if this Setup will work? Basically, I'm interested in Windows Server 2012 Server Essentials or Standard 64-bit with the necessary amount of RDP CAL this server will run exactly as the server running from 2003, in what will be the domain controller, Exchange server & perform nightly backups. In addition to this, I want to install MS Office with the necessary quantity of licenses.
  However, I would like to know if it will work or if I am looking at a catch which will prevent users to connect to the server? Or office giving problems if Word is open for a user, it will not be open for the user to one another (the same issue with Outlook & Excel etc.)?

  If there is no potential problem that prevents this configuration to work, can someone please point out to me what will be the problem and if there is a solution?

  TIA

  Hey Wil,

  The question you posted would be better suited in the TechNet Forums. I would recommend posting your query in the link below.

  General Forum(Windows Server) Technet

  Hope this information helps.

• Unable to print a PDF with adobe reader 10.1.12 Windows Server 2012 R2 RDS session

  Situation: My users are connected with RDP on Windows Server 2012 R2 Datacenter Remote Desktop Service and when they connect, their share printers are installed.

  When users open a pdf file, they cannot print it. When trying to print a file, nothing happens... Any file sent to the printer...

  I saw a difference between the shortcut icon of the adobe reader for users who have this problem and other software.

  No problem:

  

  Problem:

  

  If anyone can help me

  Thank you!

  Hi Ajlan,

  To solve my problem, I uninstalled adobe reader X with "Adobe Reader and Adobe Acrobat Cleaner Tool", rebooted the server, installed Adobe Reader XI and restarted again.

  For some users, this fixes the problem, but with a few others, I had to define default Adobe Reader again.

  I tried without using 'Adobe Reader and Adobe Acrobat cleaning tool' front and the adobe reader X software was not really uninstall.

  Thank you

  Kind regards

  Sullyly

• Windows Server 2012 Standard Activation failure

  Hi MS supports,

  We have two Windows Server 2012 Standard which must be activated with the information of the right at the bottom of the windows desktop as shown in Figure 1.

  Then, I run the command slui and enter the product key to activate as shown in figure 2.

  Unfortunately, I got an error with already shown as Picture 3.

  Note,

  • I called the Activation Center as indicated in picture 4 in Norway to attempt activation by phone, but the CSR told me that they cannot generate the confirmation ID to activate the operating system.
  • The server is not connected and cannot be connected to the internet for internal use only.

  Can I have your help to solve the problem? and I also need to know the impact if it is not enabled.

  Thank you.

  Figure 1:

  

  Photo 2:

  

  Photo 3:

  

  Photo 4:

  

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  TechNet forums:

  https://social.technet.Microsoft.com/forums/en-us/home

  MSDN forums:

  https://social.msdn.Microsoft.com/forums/en-us/home

  See you soon.

• Supported Windows Server 2012 r2-dual monitor

  Hi all

  I'm trying to become more proficient with Windows Server OS.  I installed Windows Server 2012 r2 on an older laptop (HP ProBook 6565-b) of the mine because the base OS (not remote communication in).  I'm wanting to add a second monitor to this machine, for either extending display, or simply duplicate, if I close the lid-if I can use my screen a lot nicer, bigger than what is connected to the laptop.

  I read through all the posts on double monitor support for Windows server, but have had no luck so far with suggestions that I have ad (updated & reinstall the drivers, etc..).  I also had a cheap USB to VGA external video card (Startech.com) I tried to use... no luck.  Before I installed Windows Server 2012, I got this working environment in Windows 7 and 10 on this laptop, so I think the graphics card is supported?  I wonder if this is even possible or if I'm wasting my time?

  Any idea on how I can make this work would be greatly appreciated.

  Thank you.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.

• Error message from Windows Server 2012

  Hello

  We have an application that runs on multiple virtual machines of Windows Server 2012. The same version of the application runs correctly on all machines except one. On the race we get repeated .NET runtime, error messages in the Windows Event Viewer.

  Application: Vsop.exe
  Version of the Framework: v4.0.30319
  Description: The process was completed due to an unhandled exception.
  Exception info: exception code c0000005, exception address 6C3A23B7
  Battery:

  I checked the windows crash dump and you can observe the message.

  "the thread attempted to read or write to a virtual address to which he has no access.

  I couldn't find a reason for this behavior on a specific system. Can anyone provide some tips on why or how to fix?

  Thank you!!

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  *

  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum
  
  
  If you give us a link to the new thread we can point to some resources it

• Graphic driver Intel HD in Windows Server 2012

  Hey guys, I downloaded Windows Server 2012 through Dreamspark yesterday and installed on my desktop. But the system cannot identify the Intel HD graphics 2000.When I try to install the official driver for Windows 8 to Intel. An error window came out and said that "the system does not reach the installation requirements.

  Could someone help on this problem, please? I expect Windows Server 2012 for a long time and this problem has made things stuck. I can't use my HD display at a very low resolution.

  Thank you.

  Uninsured, I don't know exactly what a thing make you laugh. No matter you believe it or not, it's here: http://downloadcenter.intel.com/Detail_Desc.aspx?agr=Y&DwnldID=21180&lang=eng

  As I already said, what I find funny is the fact that some people like to say things like: "they have been waiting for Windows Server 2012 for a long time..." As it was the most important thing in the world, and as they wait for so long - it is a situation of fire for volunteers drill, they ask to.  It is the exaggeration of the issue that I find humorous.  Always, always will exist.  People think if they fall a few names, to mention a few things that make this situation 'important' for them - others will be more willing to help.  Often, this is the case - the human nature.

  Back to the part that mattered...

  "This software package will install the driver for the Intel® WHQL Intel HD Graphics 3000/2000 and® HD Graphics 4000/2500 for Windows 8 * Release Preview."

  Intel has drivers on Windows Server 2012 for other devices, but obviously not for the one you look at.  Just because they have one for Windows 8 does not mean it will work in 2012 Windows.

  Your problem is with Intel and what drivers they offer, not Microsoft (as I said already.)

  The drivers that you linked are for the Preview Release (foot) of Windows 8.

  If I were you, I would try all the drivers Windows Server 2008/2008 R2 for the product in question.  Although my quick research shows that none occurred for this chipset (probably because Windows Server is not a market that intel pushes for this chipset)-Yes, then I suggest to try the driver for Windows 7.  Using a Windows driver 8 beta is obviously NOT to give you the desired results.

  Try the Forums from Intel.

• Windows Server 2012 reboot w/dump (Standard Edition 64-bit (English)): w / a) CA ARCserve Backup version 16.5 b) JAVA JDK 1.7.80 c) Tomcat 7.0.59; Unexpect error and restart w/dump?

  Windows Server 2012: unexpected system error and restart w/dump?

  With the software running:

  (a) CA ARCserve Backup version 16.5

  (b) JAVA JDK 1.7.80

  (c) tomcat 7.0.59;

  (d) Symantec Endpoint Protection Version 12.1

  (e) PowerChute Network Shutdown 3. 1.0

  Should I plan to restart (I can only remote access) server for every 2 months?

  Running (without rebooting) non-stop over 6 months ago.

  Hello

  Post your question in the TechNet Server Forums, as your question kindly is beyond the scope of these Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.