WCS - model controller

Similar Questions

• WCS vs controller license Question - 5500 series.

  In the center of WCS license, there are two sets of licensing options: WCS and controller. Should I understand that:

  -Number of licenses WCS is APs how can be monitored by WCS?

  -Number of licenses controller is APs how can be connected to a WLC?

  Thank you!

  -Robert

  Hello

  Here is the link that gives you the different types of lisence WCS that are available...

  http://www.Cisco.com/en/us/prod/collateral/wireless/ps5755/ps6301/ps6305/product_data_sheet0900aecd804b4646.html

  and on the lisence 5508, you are right...

  Let me know if that answers your question...

  Concerning
  Surendra
  ====
  Please do not forget to note positions that answered your question and mark as answer or was useful

• in Cisco licenses a single model controller WLAN HA

  Hi all

  I am performing an estimate on the CCW. I have to configure a wireless controller with 12 licenses the AP based on the Cisco model. Please find below the BOM:

  C1-AIR-CT5508-K9	Range Cisco ONE - 5500 controller WLAN w / 0 AP PFR
  CON-SNT-CT5508K9	SNTC-8X5XNBD C1-5500 Wireless LAN Con w / 0 AP PFR
  LIC-CT5508-BASE	Basic software license
  ECMU-CON-LICCT8BAS	Southwestern Scotian platform upgrades the software Base Licens
  C1-MSE-PAK	Cisco MSE license a PAK
  C1FPAIRK9	Cisco ONE perpetual Foundation - wireless
  ECMU-CON-C1FPAIR	Southwestern Scotian platform is LEVEL C1 perpetual Foundation - wireless
  C1-WLC-1	THE Cisco Wireless LAN Controller PA license (any WLC)
  C1-WLC-PAK	THE Cisco Wireless LAN Controller AP License PAK (all WLC)
  C1-PI-LFA-AP-K9	PI license Cisco FOR LF & as WLAN device
  C1-ISE-BASE-AP	Cisco identity services 25 Lic endpoint database engine
  C1-MSE-LS-1	A Base of CMX Cisco (location + Connect) - 1AP license
  C1-CEM-25-K9	Cisco energy Mgmt Perpetual Lic - 25 end Points
  C1-CAND-1	Cisco connected THOSE Analytics Net deployment - 1 Dev Lic 1 year
  C1-LC-5-1Y	Cisco a 5 fps 1 year Lic StealthWatch
  C1F1VAIR-02	Tracker PID v02 Fnd Perpetual AIR - no delivery
  SWC5500K9-80	Cisco Unified Wireless Controller version 8.0 SW
  AIR-PWR-CORD-THIS	AIR Line Cord Central Europe
  AIR-PWR-5500-AC	Cisco series 5500 redundant power wireless controller

  Now, I have to configure a controller HA. In the CISCO model, the SKU is the same as the controller, which I configured above.

  Configure the controller HA without AP licenses?

  Please give me the best way to configure the WLC HA in the Cisco model

  Hi Angel,

  If you get a C1-AIR-CT5508-K9 , then you should not have licenses on the secondary unit (who you called unit HA). However if this is not the case then the usual requirement of license AP 50 County should hold to convert a secondary WLC. The number of licenses AP 50 can be registered license C1-WLC-1 pool.

  Hope I was able to clear the confusion.

  Best regards

  www.wifitrainers.com

  Learn from the best to be the best!

  Change the way you look at connectivity of wireless clients forever by registering to watch this free webinar and also a chance to win our starter kit worth $ 8000 wireless for free!

• How to integrate model of custom device controller

  Hello

  I now live a labview including 18 sub controller model, and I am trying to run this controller on RTOS VxWorks, through customized device model.

  1. when I tried to run a model simple controller (ex, a controller with 3 ~ 4 void / screw) on RTOS VxWorks, I just put simple controller in RT Driver.vi model, and then the build and deployment succeeded.

  2. then, I did it with my model of labview in the same way above controller, but I couldn't even build my model controller labview. I don't know why, but the build process stops at the initialization stage. I think that this problem will appear when there are more than 3 ~ 4 sub vis are added under the custom device project.

  Any ways to use a model of controller labview instead of just put a model in RT Driver.vi?

  Now, I managed to build my model labivew, I saw the light of the compactRIO blinked, which measn the connection is ok by CAN - Bus.

  But it's still weird and not possible to build my model at a time. In addition, cannot again build the custom devcie just before successfully built after the addition of two functions simply.

  In any case, the solution to my problem is as below.

  For example, my cruise controller written in labview consists of 3 simulation systems arrive.

  Each system to arrive includes several subsystems.

  First, create the model after adding one of 3 major subsystems. (In this case, I never had errors in the construction of models of labview)

  Secondly, if the first step is ok, add one of the other 2 systems come in the custom device and then build again.

  Thirdly, add the remaining subsystem in the custom device and establish the entire model and deploy it to the target.

  With three steps above, I can still build devices customized successfully.

• Error message from WCS (static WEP)

  Hi all

  We're migrating all the IOS AP to LWAP using WLC and WCS, we have several WLAN with a different set of security on IOS AP policy.

  I am facing a problem in the creation of WLAN on WCS server, I create a static model with WEP key with 128-bit encryption, when I copy the existing key of IOS AP to the WCS model he throws pop tells us what and ' for the static WEP ASCII key size 128 bits, the key has ti be exactly 16 ascii characters. While the characters entered are 28 "

  My question is what I have to change the key to search for characters exactly 16 or is it possible to change the WCS can accept the key.

  I tried to create WLAN on WLC, but he says "128-bit WEP key size is not supported on 11xx, 12xx and 13xx model AP, WLAN will not be pushed to AP"

  Outside installation we use AP 12XX series.

  Please let me know if I can use static WEP on my wireless environment.

  Great!

  I guess we can mark this as resolved post then

• management of WCS, WLC and H-REAP AP1242

  We have chosen to deploy 1 wlc2106(k9-7-0-98-0) and 4 or 5 APs 1242, LAP - AIR and AIR - AP converted to AIR TOURS in each office, with a backup 1 WLC5500, in seat.

  We have WCS (v7.0) and in this architecture, 1242 APs will be always connected on 1 of 2 WLC (never in autonomous REAP).

  In normal mode, WLAN, working in the central authentication and Central switch. In backup mode, WLAN work in central authentication (backup WLC headquarters) and local switching.

  For the configuration of the WLC, is it really necessary to create and REAP H unit for all the Aps or can I leave by default-AP group?

  I have a problem with AIR - AP converted it TURN: I can't push a TOUR from the WCS model:

  AP0022.90.1b.9d36 is the converter of AIR - AP.

  another AP are AIR - LAP: Ok for this model that apply

  

  What can be the problem with this access point?

  Thanks for your help.

  Lorenzo

  The best for homelessness must have WLC, authentication management. Now, if there is a WAN link rather slow in the game, perhaps, he retorted the initial advantage of it.

  In this case REAP H groups will allow roaming between aps hreap seemless.

  In any case, it does not hurt to combine your APs in Hreap groups. It can only help. So ... :-)

  Nicolas

  ===

  Remember responses of the rate that you find useful

• failure of the graphics controller envy14t-1000 flashes code?

  For laptop of HP Envy 14-1000. i5 - 450 M, Radeon 5650 M. Out of warranty. New installation of Windows 8 Professional on an OCZ Agility SSD 4.

  At startup, caps lock flashes code indicates a failure of the graphics controller. Stays on for 2-5 minutes, but will then start Windows. This indicates imminent failure and a replacement motherboard is necessary, or is it the result of something else?

  On your laptop, there are several codes of different flashing given by a flashing caps lock key. You say that it is the graphical model controller failure error light. Use this document to make sure it is the correct error code.

  The ENVY of laptops series have their GPU soldered onto the motherboard. So if you've got a controller failure graphics card you might have to replace the entire motherboard of the laptop. This interview is possible to do it yourself, although difficult. Even if you specify your product is out of warranty, I suggest to contact HP Technical Support again and look in an interview of the laptop. If you are in the USA / Canada, you can contact HP at 1-800-474-6836. If you are outside the United States / Canada then here try to find contact information for your region.

• Satellite C70 - A - get BT cannot work

  Hello

  I just installed bluetooth suite driver thread of suggestion, but I can't manage to see in Device Manager...

  I have model controller C70 - A win 8.1 Atheros ethernet Realtek Wireless LAN

  Can you please send full model of your laptop (C70-A-xxx) name?
  I assume that not all models of C70 - A BT module.

  In any case, I assume that you got your machine with pre-installed Win8 and with the original version of OS THAT BT has worked properly. Can you confirm this?
  Have you noticed BT problems after update to Win8.1?

  Usually, when you turn on WIFI, BT module must be enabled also so please check the Device Manager after enabling WLAN antenna.

• HP450-a111ng: Ethernet driver is missing for HP450-a111ng

  Hello

  can someone tell me pls what driver I can use for the LAN network card?

  I spent quite some time already on him to resolve the issue, but so far without success.

  So I need your help.

  Thank you very much!

  Frank Bye

  Hi, @FrankiB :

  You need this driver for the ethernet model controller that has your PC...

  3 c 14 Realtek NIC Driver (Win7 64 bit of towers) Original

  This package provides the driver for the NIC (NIC) Realtek for assumption of office models that are running a supported operating system.

  File name: sp68469.exe

• Install Windows 7 on a Compaq Presario CG61 - driver for HARD drive

  Hello everyone,

  because of my Compaq Presario CQ61-423SG HARD drive (series: edited by moderator) broke (and with it the recovery partition), I would like to install a new Windows 7 (home premium, 64-bit) on the new HARD drive.

  Initially the program is in need of a driver for the HARD disk installation. On the HP site, I can't find. Can someone help me? Where can I get a driver for my laptop?

  Thank you.

  Hello:

  I am very surprised that Windows 7 requires a driver disk for the model controller.

  In any case, I compressed upwards and tied the drivers you need (look under the line attachments at the bottom of my post).

  Now, here's what you have to do...

  Extract the files to a flash usb without all the folders drive.

  With the flash player and the installation of W7 media connected to the computer, boot from the installation of W7 media.

  After selecting the install now option, select the training - Advanced menu, Options and select the option load a driver.

  You should now see the storage driver files listed.

  If you check the box, it only includes the compatible driver.

  Follow the prompts and should install W7.

• Java beginner UI development: using HorizontalScrollableTitleView (Component Manager).

  I'm a Java developer backend and wishing to develop my first app but need assistance of the

  HorizontalScrollableTitleView (or any other PaneManager). Is there code examples available that I can use as a reference? What I like is pretty simple so far, but I don't know how to operate it. I will like to create HorizontalScrollableTitleView, and when I click on each title, I'll like to show some tests below.

  I'm testing the code with a touch BB Simulator, when I click on a window, I always get a TouchEvent but I do not know how to handle. I have a Bold 9700 with OS 6.0, which I will like to install the app on in the future (impossible to find a simulator for it yet), what events should I look for to work on my 9700? How should I treat it?

  Here's what I have so far:

  package mypackage;
  
  import net.rim.device.api.ui.Field;
  import net.rim.device.api.ui.container.MainScreen;
  import net.rim.device.api.ui.container.VerticalFieldManager;
  import net.rim.device.api.ui.component.Dialog;
  import net.rim.device.api.ui.component.LabelField;
  import net.rim.device.api.ui.component.pane.HorizontalScrollableController;
  import net.rim.device.api.ui.component.pane.HorizontalScrollableTitleView;
  import net.rim.device.api.ui.component.pane.Pane;
  import net.rim.device.api.ui.component.pane.PaneManagerController;
  import net.rim.device.api.ui.component.pane.PaneManagerView;
  import net.rim.device.api.ui.component.pane.PaneManagerModel;
  import net.rim.device.api.ui.component.pane.PaneView;
  import net.rim.device.api.ui.component.pane.TitleView;
  import net.rim.device.api.ui.FocusChangeListener;
  
  /**
   * A class extending the MainScreen class, which provides default standard
   * behavior for BlackBerry GUI applications.
   */
  public final class PaneManagerDemoScreen extends MainScreen implements FocusChangeListener {
  
      private static PaneManagerModel model; 
  
      /**
       * Creates a new PaneManagerDemoScreen object
       */
      public PaneManagerDemoScreen() {
          // Set the displayed title of the screen
          setTitle("PaneManager");
  
          // initialize PaneManager
          initializePaneManager();
  
          // populate Panes
          populatePanes();
  
      }
  
      public void focusChanged(Field field, int eventType) {
  
          Dialog.alert(eventType + ": " +  field.toString());
  
          /*
          if (verticalFieldMgr != null) {
              if (eventType == FOCUS_GAINED) {
                      System.out.println("Switch to: " + ((LabelField)field).getText());
                      delete(verticalFieldMgr);
                      verticalFieldMgr = displayTasks(field);
                      add(verticalFieldMgr);
  
              }
          }
          */
      }
  
      private void initializePaneManager() {
          model = new PaneManagerModel();
          //model.enableLooping(true);
  
          TitleView header = new HorizontalScrollableTitleView(Field.FOCUSABLE);
          header.setModel(model);
  
          PaneView paneView = new PaneView(Field.FOCUSABLE);
          paneView.setModel(model);
  
          PaneManagerView view = new PaneManagerView(Field.FOCUSABLE, header, paneView);
          view.setBackground(null);
          view.setModel(model);
          view.setFieldWithFocus(paneView);
  
          PaneManagerController controller = new HorizontalScrollableController();
          controller.setModel(model);
          controller.setView(view);
  
          model.setView(view);
          model.setController(controller);
  
          view.setController(controller);
          add(view);
      }
  
      private void populatePanes() {
  
          for (int i = 0; i < 5; i++) {
              VerticalFieldManager vfm = new VerticalFieldManager(USE_ALL_HEIGHT | USE_ALL_WIDTH);
              //vfm.add(new LabelField("VFM Pane" + i, Field.FIELD_HCENTER));
              Pane pane = new Pane(new LabelField("Pane" + i), vfm);
              model.addPane(pane);
  
          }
      }
  
  }
  

  I also discovered that there is a project of PaneManagerDemo in samples of Blackberry I could use.

  To use it, first install Blackberry Java plug-in for Eclipse. Launch it and then go to Blackberry > import > samples of Blackberry. Then select "PaneManagerDemo".

• Scrolling tabs

  http://S14.PostImage.org/wjbu9junz/Untitled.PNG

  How can I do something like that? It's marginally frequest appearing... all in the middle... and favorite left right...

  AM stüch here do not know what to do

  PaneManagerModel model = new PaneManagerModel();
            model.enableLooping( true );
  
            // setup the first tab
            VerticalFieldManager vfm = new VerticalFieldManager(
                Field.USE_ALL_HEIGHT | Field.USE_ALL_WIDTH |
                Manager.NO_VERTICAL_SCROLL | Manager.NO_HORIZONTAL_SCROLL );
            LabelField lbl = new LabelField( "Content for tab 1", Field.FOCUSABLE );
            vfm.add( lbl );
  
            LabelField myLbl = new LabelField( "Tab 1" );
            NullField nullFld = new NullField( Field.FOCUSABLE );
            HorizontalFieldManager hfm = new HorizontalFieldManager();
            hfm.add( nullFld );
            hfm.add( myLbl );
  
            Pane pane = new Pane( hfm, vfm );
            model.addPane( pane );
  
            // setup the second tab
            vfm = new VerticalFieldManager(
                Field.USE_ALL_HEIGHT | Field.USE_ALL_WIDTH |
                Manager.NO_VERTICAL_SCROLL | Manager.NO_HORIZONTAL_SCROLL );
            lbl = new LabelField( "Content for tab 2", Field.FOCUSABLE );
            vfm.add( lbl );
  
            myLbl = new LabelField( "Tab 2" );
            nullFld = new NullField( Field.FOCUSABLE );
            hfm = new HorizontalFieldManager();
            hfm.add( nullFld );
            hfm.add( myLbl );
  
            pane = new Pane( hfm, vfm );
            model.addPane( pane );
            model.setCurrentlySelectedIndex(0); TitleView header = new HorizontalScrollableTitleView(Field.FOCUSABLE);          header.setModel(model);          PaneView paneView = new PaneView(Field.FOCUSABLE);          paneView.setModel(model);          PaneManagerView view = new PaneManagerView(Field.FOCUSABLE, header, paneView);            view.setBackground(null);            view.setModel(model);            view.setFieldWithFocus(paneView);            PaneManagerController controller = new HorizontalScrollableController();            controller.setModel(model);            controller.setView(view);
  
              model.setView(view);                    model.setController(controller);
  
              view.setController(controller);                    add(view);    
  

  its okey it worked.for now I want to see what happens more

• Encoding methods

  My project is mounted up, and more, 100 files, I start to worry if my drawing is too complex for a blackberry application.

  My current project works:

  -Home

  Main (Contains the main methods to start the program)

  Debugger (Provides a custom behavior for the statement of the application)

  StaticLookup (Allows classes to find references to some core files)

  -Controller

  Order (Interface to the command objects)

  CommandInoker (Receives the command objects and ready for execution)

  CommandScheduler (Maintains a queue of orders to run and runs the front of the queue)

  {concrete_command_objects} (There are several command objects which make different actions)

  -Model

  FieldObserver (Maintains a reference to fields that can be changed)

  Model (Organizes the data storage)

  ModelErrors (Keeps the application error data)

  ModelLocalData (Manages the local operating data)

  ModelSession (Manages the data for the current user)

  ToolRegister (Maintains and modifies a vector tools (views) to use)

  ---------- UI

  RenderAgent (Makes the display screens, running a push and pop - their)

  -UI.advanced

  {Several small objects that provide functionality for the special input fields}

  -UI.basicElements

  {Keys} (Special keys)

  {Fields} Various input base and display fields

  ContentPanel (interface for content panels (parts of screens))

  ContentPanelBodyBuilder (generates the Panel content for the whole screen)

  ContentPanelBuilder (abstract class for the type of generator)

  ContentPanelBuilderDirector (the Creative Director of content pane)

  ContentPanelFooterBuilder (generates the content display page footer Panel)

  ContentPanelHeaderBuilder (genearates Panel to screen header content)

  ContentPanelMenuBuilder (generates the content panel menu on screen)

  {Custom entries......}

  ---------- UI. Views

  display_login. Java (contains the contents of the body of login page)

  {Several display_... the files that contain the content of the page}

  DisplayBuilder (interface for display_... files)

  DisplayBuilderDirector (ordered the construction of a billboard)

  DisplayPanel (abstract class as display_... using classes)

  ---------- UI. Images

  {photos}

  -UI.views

  view_aaw. Java (contains information for the construction of the content and display panels to use)

  {more view_... classes of java for the points of view of different tools}

  View (interface for view_... java classes)

  ViewBuilder (you can guess)

  ViewBuilderDirector (you can guess)

  ViewController (provides methods for controll views and creating view)

  When the application starts, the Main.java creates the debugger, static search, view model controller and Summoner of command. The model creates all the objects in its packaging (modellocaldata, etc.) the command invoker creates the command Scheduler, etc. etc.

  The main and then creates a new command object, Cmd_startupLoad and tells the Summoner to execute it. The Summoner adds to the Scheduler which then calls the commands execute method.

  The cmd_startupload creates several command objects that preform actions such as saving tools (views) in the register of the tool, and then finally a cmd_loadview is called with the parameter of view_login. This command displays the login screen. It does this by calling into the view that calls tableautiers content requiring builders of the display.

  Is anyone elses code oriented and complex object? Or I'm completely my design work?

  As long as you have defined for each category of packets it seems good.

• problem with appearance of pane tab

  The following code creates a tab simple part Manager with 2 tabs and simple LabelField for the tab labels.  In the image as an attachment, you will see that there is a solid experience behind the LabelField.  I tried to give transparent backgrounds of the LabelField, but who has not removed this experience.  How can I get rid of this experience?

  import net.rim.device.api.ui.*;
  import net.rim.device.api.ui.container.*;
  import net.rim.device.api.ui.component.*;
  import net.rim.device.api.ui.component.pane.*;
  import net.rim.device.api.ui.decor.*;
  
  public class BugRptTabs extends UiApplication
  {
    public static void main(String[] args)
    {
      UiApplication instance = new BugRptTabs();
      instance.enterEventDispatcher();
    }    
  
    public BugRptTabs()
    {
      pushScreen( new BugScreen() );
    }
  
    private class BugScreen extends MainScreen
    {
      public BugScreen()
      {
        super( Manager.NO_VERTICAL_SCROLL | Manager.NO_VERTICAL_SCROLLBAR
                      | Manager.NO_HORIZONTAL_SCROLL
                      | Screen.DEFAULT_CLOSE
                                          | Screen.DEFAULT_MENU );
  
        // setup the tab model with 2 tabs
        PaneManagerModel model = new PaneManagerModel();
        model.enableLooping( true );
  
        // create a transparent background
        Background bg = BackgroundFactory.createSolidTransparentBackground(
                                                         Color.BLACK, 0 );
  
        // setup the first tab
        VerticalFieldManager vfm = new VerticalFieldManager(
                                 Field.USE_ALL_HEIGHT | Field.USE_ALL_WIDTH |
                                 Manager.NO_VERTICAL_SCROLL |
                                 Manager.NO_HORIZONTAL_SCROLL );
        LabelField lbl = new LabelField( "Content for tab 1", Field.FOCUSABLE );
        vfm.add( lbl );
        MyLabelField myLbl = new MyLabelField( "Tab 1", Field.FOCUSABLE );
        myLbl.setBackground( bg );
        Pane pane = new Pane( myLbl, vfm );
        model.addPane( pane );
  
        // setup the second tab
        vfm = new VerticalFieldManager( Field.USE_ALL_HEIGHT | Field.USE_ALL_WIDTH |
                                        Manager.NO_VERTICAL_SCROLL |
                                        Manager.NO_HORIZONTAL_SCROLL );
        lbl = new LabelField( "Content for tab 2", Field.FOCUSABLE );
        vfm.add( lbl );
        myLbl = new MyLabelField( "Log", Field.FOCUSABLE );
        myLbl.setBackground( bg );
        pane = new Pane( myLbl, vfm );
        model.addPane( pane );
  
        // select the tab to be displayed
        model.setCurrentlySelectedIndex( 0 );     
  
        // setup the rest of the components
        HorizontalTabTitleView titleView =
                 new HorizontalTabTitleView( Field.FOCUSABLE );
        titleView.setNumberOfDisplayedTabs( 2 );
        titleView.setModel( model );
  
        PaneView paneView = new PaneView( Field.FOCUSABLE );
        paneView.setModel( model );
  
        PaneManagerView view = new PaneManagerView( Field.FOCUSABLE  |
                                             Manager.NO_VERTICAL_SCROLL |
                                             Manager.NO_HORIZONTAL_SCROLL |
                                             Manager.USE_ALL_HEIGHT |
                                             Manager.USE_ALL_WIDTH,
                                             titleView, paneView );
        view.setModel( model );
        model.setView( view );
  
        // set the background color of the tabs
        bg = BackgroundFactory.createSolidBackground( Color.BLACK );
        titleView.setTabBackground( Field.VISUAL_STATE_ACTIVE, bg );
        titleView.setTabBackground( Field.VISUAL_STATE_FOCUS, bg );
        titleView.setTabBackground( Field.VISUAL_STATE_NORMAL, bg );
  
        // set the background color of the remainder of the
        // title area (behind the tabs)
        titleView.setBackground( Field.VISUAL_STATE_ACTIVE, bg );
        titleView.setBackground( Field.VISUAL_STATE_FOCUS, bg );
        titleView.setBackground( Field.VISUAL_STATE_NORMAL, bg );
  
        // configure the Controller
        HorizontalTabController controller = new HorizontalTabController();
        controller.setModel( model );
        controller.setView( view );
        model.setController( controller );
        view.setController( controller );
  
        // add the tab manager to the MainScreen
        this.add( view );
      }
  
      private class MyLabelField extends LabelField
      {
        public MyLabelField( String str )
        {
          super( str );
        }
  
        public MyLabelField( String str, long style )
        {
          super( str, style );
        }
  
        protected void paint(Graphics graphics)
        {
          graphics.setColor( Color.WHITE );
          super.paint( graphics );
        }
      }
    }
  }
  

  A few other changes were necessary to 6.0.  I removed titleView.setTabBackground (Field.VISUAL_STATE_FOCUS, bg); andtitleView.setBackground (Field.VISUAL_STATE_FOCUS, bg); and changed the way the labels have been added.

  Rather than use a focusable LabelField, do the lbl1 and lbl2 LabelFields not focusable and create a NullField focusable.  Add the two of them to a HorizontalFieldManager and also use the label to your component.

  This allows the screenshot I attached (using the same Simulator with which you test).

• Help! How to plan the small/medium business

  Hello

  I have the basic configuration is already done (staticly)

  Since the system (WCS) wireless controller, I can see the controller and the lwapp.

  We plan to add more APs in places diffrenet and control each device.

  in any case, now after the basic configuration what should I do?

  Add aps more? or download the plan or safety?

  Can you please give me an advice how to plan a small / medium business building of 3 floors

  BR

  Yamani

  I don't know how you have failed, but once you get the WLC and AP, test and make sure that it meets your requirements.  You don't need WCS right now.  Do all SSID, security stuff and try it again.  When you have this job, then you can move you.  Once you have a stable environment, then go ahead and add AP and ensure again that you have signal where you need signal and that everything works.  After that, then go ahead and add the floor plan for WC and access point to the map.  WCS is for management and does not need to be in place so that your wireless network is working.  I hope this helps.