Satellite C70 - A - get BT cannot work

Similar Questions

• Satellite C70 - B - Touchpad does not work

  A couple of months, I bought the Toshiba Satellite C70-B-212. However, in recent weeks the Touchpad no longer works. I already reinstalled the driver, but that didn't help.

  What can be the problem?

  Go to the BIOS settings and check if the pointing device is enabled.
  You can also load default settings in the BIOS. This should allow the pointing device (touchpad) too.

• L755-154 satellite - could not get WiFi to work

  Hello

  I have a Satellite L755-154 runs a new copy of Windows 7, but I can't get the WIRELESS to work at all.

  Someone at - it a link to the drivers concerned? (Windows 7 64-bit)

  I don't see any network adapter wireless device settings? just the Ethernet connection.

  Thanks for any help.

  see you soon

  Sam

  Hello
  I have the same problem.

  I have a Satellite L755-175 runs a new copy of Windows 7 Ultimate, but I also can't seem to get the WIFI to work at all.
  I downloaded drivers from the corresponding page in the drivers for Satellite L755-175 (Windows 7 64-bit) (also tried 32 bit). But do not install drivers.

  I don't see any network adapter wireless device settings? just the Ethernet connection.

  Thanks for any help.

  see you soon

  Brian

• Satellite 1410-604 - get wirless to work

  Hey there, I seem to have a problem with my Satellite 1410 604, I got the Briefcase "Toshiba WirelessLanDriver" of the cd as he said it, I followed the instructions, but yet he says that the .msi file is that contains no information about the pilot for some reason I can't get my wireless to work on this pc.

  Any suggestions on how I do it?

  As far as I know, this is an old series and I could not find any help on a toshiba Web page. so now im going to try out this forum and see if anyone has a suggestions...

  Kind regards.

  Klattrup

  Hello

  As far as I know the Satellite 1410 604 was equipped with WiFi, but it's optional.
  So maybe your portable computer does not support the wireless network adapter and the WiFi network is not integrated.

  Please check first of all in Device Manager if there is a yellow exclamation mark under network adapters, or if the WiFi card is recognized.

  If this isn't the case, then this would mean that the WLan card is not in.

• Satellite M60 - 164 get bluetooth to work

  I want to know if my pc has bluetooth on it, it seems she is in the device maneger but I can't make it work so I'm wandering if he is actuly on the phone it has a section in the control panel can anyone help please

  Hi mucklin terry

  I checked the Satellite M60-164 information and it seems that the Bluetooth is not available on this device.
  In this case, the only way to use Bluetooth technology is to use the PCMCIA Bluetooth card or the USB Bluetooth key.

• Satellite L45-S7419 - cannot get device WLAN working for XP

  Hello all and ty in advance for anyone who can help.

  I have a serious issue that I have not been able to understand and finally just abandoned.

  My father has a Satellite L45-S7419 which has wifi 802. 11 b/g, built in at Bestbuy which came with Vista there is quite some time and I finally had the time to put XP on it (which, in itself, was a challenge) and I am unable to get drivers that work with the built-in Wifi.

  In Device Manager, it shows the device with a yellow "?" and no driver installed. Unfortunately, Toshiba has no drivers for XP, but fortunately (I thought at the time) realtek had drivers for RTL8187B. Who called on the site - (RTL8187B driver auto Installer Windows (Win2K/WinXP/Vista support), Win2K/WinXP/Vista driver ver.1158 1158 20/11/2009)

  I installed the drivers, but the device is not simply either recongize or it some how is not the correct drivers, because the appliance does not work.

  Does anyone have an idea what I can do? I tried everything that I can with my knowledge. I tried another way to install and uninstall the device first Manager device, installed the drivers then that the "new Device Manager" jumped upward and the device of RT8187B popped up, but still get the "new hardware found" and the right afterwards "the unit works may not properly" or something similar. As if I had just install the driver itself.

  Any help would be appreciated wildly. Ty!

  Hello

  Have you checked if the WLAN function is? Therefore, you can use the switch of hardware on the laptop and the combination FN + F9.
  Check this box!

  Can you also tell us what version of BIOS is installed on the laptop? In your case, I'd install the latest version of the BIOS. Sometimes, I could here it solves different problems WLAN. It s worth a try! ;)

  I think that, in the worst cases, you must use the preinstalled operating system (Vista). There are all the drivers and tools pre-installed so I m asking you to install another OS. Now, you need to install a large number of drivers and you must spend a lot of time for that so I always prefer the preinstalled operating system.

  Welcome them

• Satellite A210-19Z: could not get internet to work with Windows XP installed

  Hello

  When I install Windows XP on my Satellite I can not get Internet to work

  Do I have to install drivers or so?
  Please post links to the drivers if so.

  Christian

  Of course you need readers.

  If you have connected your router with a LAN cable, then you will need to install the LAN driver. If you want to use the network WiFi WLan driver must be installed also.
  If your computer laptop doesn t supports the WLan card then the WLan driver is not required

  All the drivers (if available) XP can be downloaded from the European driver Toshiba page!

• Satellite C70-A-13D: cannot create recovery media - error 02016e-3 c-0000000

  Hello

  I am creating a recovery flash drive on my new laptop satellite c70-a-13d windows 8 operating system and get the following message

  differences between the files following z\recovery\install20.swm target path e:\\zzimages\zzimages\install20.swm (error code 02016e_3c_0000000

  and the recovery disc creation end not any ideas what is wrong ive tried to do a few times - the flash drive is a toshiba transmemory 16 GB uhybs-o16gh

  Any help would be appreciated,
  I'm reluctant to buy the discs just to have the same problem with them also!

  Try please create recovery DVDs. A few empty drives are cheap. If the same problem happens again I recommend you to contact the nearest Toshiba service provider in your country and explain the situation. It's not your fault, and maybe you will get new free recovery disk.

  All don t delete anything on the HARD drive.

• Satellite A200-1ax: could not get the BT working on Win XP

  Hello

  I have a Toshiba laptop satellite a200-1ax. I installed Windows XP sp2.
  My problem is that I can't get the bluetooth work. I have installed a Toshiba bluetooth driver and nothing. When I try to install the bluetooth stack Toshiba the instalation stops at the driver part and won't. I tried, and left for more than 2 hours and it was not moving.

  When I opened my device manager there is no place where a bluetooth connection is mentioned. In the bluetooth of the 5 information system services where collapsed and to manual start. I tried to start manually services.msc, but there was no available bluetooth service.

  You have to add that I have 3 elements in with question marks Device Manager:
  1. mass storage controller
  2. feature modem on high definition audio bus
  3 PCI memory controller.

  If anyone can help with the problem of bluetooth, or three missing drivers, please do :)

  Hello

  The Bluetooth should work!
  The laptop supports the BT module, and I think that you have not properly installed.

  Firstly don mix t the monitor BT with BT stack. You need the BT stack!
  I think that you should remove the software BT OS and after that new reboot should try to reinstall again.

  Then you must enable BT using the Fn + F8 key to complete the configuration of BT!

  Other devices such as PCI memory controller and mass storage controller. Are not supported by Windows XP and therefore there is no drivers!

• A pen as a tool with a diagonal line through it appeared that I cannot get rid where work around. He is NOT one of the tools on the standard toolbar. Help please

  A pen as a tool with a diagonal line through it appeared that I cannot get rid where work around. He is NOT one of the tools on the standard toolbar. Help please

  Means generally that you're trying to work on a layer locked.

• How can I get FF to work with organizing Mod (for the mods used with ARE: Skyrim)? I get an error message that it cannot understand the given address.

  I am a big fan of the Elder Scrolls and uses the new 2.2.9 STEP Setup. They went to the organizer of the Mod (MO) and I can't seem to get my FF working with the mod download things part. I click on the icon "Earth", that takes me immediately to the page file Nexus Mod, but when I choose a file to download after clicking on "Download Manager" I get this error message:
  The address was not included
  Firefox doesn't know how to open this address, because one of the following protocols (nxm) is not associated with any program or is not allowed in this context.
  You may need to install additional software to open this address.

  The address when clicking "Download Manager" begins with nxm://Skyrim/mods/ the address is such because trying to download with the Manager.

  Any help will be greatly appreciated! I pulled out my hair for the last few hours trying to find a solution. I disabled Adblock, other popups blockers and activated the main address in my exception rules. It simply doesn't get it. Ugh!

  Thank you in advance!

  In order to use nxm: / / links, Nexus Mod Manager must be installed and associated with the Protocol nxm .

  • http://www.nexusmods.com/Skyrim/mods/modmanager/

  Problems with this program to third parties, please see the support forum:

  • http://forums.nexusmods.com/index.php?/forum/1413-NMM-code-development-chat

• Can't get internet to work on my Satellite A100 formatted

  Hey,.

  I recently formated only my computer and then I installed all the drivers I need for my PSAA9 A100... but the internet wont work... I kinda understand why but do not know what to do about...

  If I'm not confused with the proper driver unentierly to get internet to work with my adsl is the pilot network, right?

  Well, I downloaded this one, but when I tried to install it there is no setup file or the Installer file to uninstall... Unfortunately for me I managed to click that one a little too quickly without checking what it was now, which leaves me with 2 questions:

  Are the pre' LAN drivers with windows installed so that the internet can work from the beginning?
  How do then if this is not the case to operate internet?

  Any help is appreciated, thanks on advance Maxime Maison

  Hello

  According to you the first thread, I assume that you have installed the XP operating system and didn t use the Toshiba Recovery CD. Am I wrong?

  As you know, the LAN driver can be downloaded from the Toshiba page.
  If you will not find any .exe file then you need to install the LAN driver from Device Manager.

  Go to Device Manager, expand network adapters, chose the unknown device and install the reader following this procedure.

  -Select update/install driver
  -Choose the option install from the list or a specific location
  -Select option don't search. I will choose the driver to install
  -then point to the driver that you have downloaded and unpacked.

  Good luck

• Satellite P100-434 - Windows Vista - how to get Aero to work

  Hi does anyone know how to get Aero to work on my Tosh laptop. the OS is Vista Home Premium and I have exhausted the help options OS affecting theme Win Vista, color scheme to Aero etc.

  Hello

  The laptop should be certainly be able to use the AERO.
  It supports a 256 MB card and 2 GB memory graphics.

  So it seems you only need to activate the Aero on your Vista.
  But which version of Vista is installed on the laptop.
  As I know the basic home edition version does not include the Aero. The Aero is available on the Home Premium edition or newer

  So now you ask what you can do? I found these tips on the site of Ms.
  Check if the desktop theme has been set to Windows Vista

  1. open theme settings by clicking the Start button, clicking Control Panel, appearance and personalization, customization and then clicking theme.
  2. in the theme list, click Windows Vista, and then click OK.

  Try to enable transparency widowed intercadres.
  But note; to enable transparency, the color scheme must first be set to Windows Aero.
  1. open Personalization by clicking the Start button, clicking Control Panel configuration, on appearance and personalization, and then click customization.
  2. click on the appearance and color of the window.
  3. Select the transparency check box.

• Cannot get bluetooth to work on my Qosmio F10

  Hi, I have a Qosmio F10 but can't seem to use the bluetooth devices. When I went in the bluetooth devices Manager and tried to add a new device, said bluetooth was off and then I went in an another bluetooth application and who says it could not load the bluetooth startup file (although when I checked, it was on the computer).

  Stupidly, I then installed something called Bluetooth Monitor 2 but this actually took away all bluetooth files and I could not find the bluetooth manager plus. I uninstalled this Bluetooth Monitor 2 but still can't find the old files.

  I was wondering if someone could help? I realize it's a guy very newbie Q but I hardly ever use my laptop and can get the bluetooth works fine on my desktop.
  Any help would be greatly appreciated.
  Thank you

  Hello

  I do not know what F10 you have exactly, but as far as I know that some of them are without Bluetooth. Each unit with BT has a Bluetooth key in the lower corner.

  Also check this please page http://aps.toshiba-tro.de/bluetooth/.

  Good bye

• Can not get audio driver working under WXP SP3 on the Satellite A200 - 1 P 8

  Hi all

  I have WXP Pro with SP3 and I do not get the sound drivers work.
  If I try the packages, I get the error:
  The version of windows you have installed does not match the update you are trying to install

  SO HOW TO GET AUDIO DRIVERS WORK? :(:)?

  Thx a lot

  By other devices are up to? PCI devices.

  I think that the key is installed SP3.
  It seems that your audio driver does not work or does not fully support SP3.

  In my opinion you have 2 options;
  Either you would update the audio driver and would hole that the new update is available and will work with Win XP SP3 or you simply need to remove the installed SP3.

  I had to remove the SP3 from my laptop because the MS Outlook couldn t receive e-mails from the server.

  See you soon