We are planing to upgrade our server to sbs2011 sbs2008

Similar Questions

• Upgrade the server to update from Adobe?

  I inherited our Adobe update server.  (Tip: I don't know what I'm talking about.)  Due to some problems, Support Adobe advised me to upgrade our server V3 to V4.  Looking for Adobe's Support site, I can't find anything about upgrading a server, but finding documentation on creating a server to version 4.  Isn't it just virtual?  What do I need to create a new server to the version you want?  It looks a bit like throwing the baby out with the bath water, but I can't use the correct search string.  It would appreciate any push in the right direction.  Thanks, Judy

  Hello

  The instructions in using the Adobe update (AUSST) server configuration tool should guide you through the process.

• We install a note on our server and we had a message that we need to install MSXML version 6.10.1129.0, where are we this will affect our server performance?

  We want to have a note on our server so it can be used at the reception... installed by microsoft online and we got the error message that we need MSXML version 6.10.1129.0.

  Where do we need and will it affect our server performance?

  Hello

  Your WIndows question is better suited in the TechNet forums. Youy may post your request there.

  Here is the link:

  http://social.technet.Microsoft.com/forums/en/category/windowsxpitpro
   

• Additional licenses purchased in 2004, but they are not loaded on the server, and they can't find the hard copy of the licenses to load them in.

  Asked me to take over the COMPUTER Department of a small Christian school. They are running SBS 2003. They bought licences for additional client access in 2004, but they are not loaded to the server and they can't find the hard copy of the licenses to load them in. Also, they purhcased of XP Pro and Office 2003 licenses (I have the disks and keys to install but do not know how many licenses they own) and they are not either of the paper copy of these licenses. Is there a way to contact Microsoft to get the licenses? Any help would be appreciated.

  Bill

  original title: recover lost Volume Licensing

  I just figured this out...

  I called the 1-866-230-0560 Option 3 Volume licenses and talked to someone who searched under the name of the school in order to locate licenses. It is even searched under our zip code and found other licenses that have been purchased by the school where the dealer abbreviated the name of the school.

  I hope that this is useful information to others in the same situation.

  Bill

• (Redirected) Time to upgrade the server

  I need to upgrade my server.

  I've been using a 400SC for about 12 years with Server 2003 and it has served us well.

  I have 8 client machines.

  The server is a domain controller and a file server for 2 programs.

  No mail electronic or other uses.

  I am trying to decide what machine to update and continue as we are for several years.

  I hope I can shoot with Server Essentials of 2012.

  One of my client machines is a precision with two Xeon processors T7400. I thought to use it just as a server. I also have a Poweredge 840 which I could resurrect.

  Ideas or recommendations. Don't know about which way to go. I just want to be able to run another 5 or 6 years without having to upgrade again.

  I don't want a possible RAID.

  Don't like a single HD in my server.

  Best of this post in the Forum servers, here:

  http://en.community.Dell.com/support-forums/servers/default.aspx

  Bev.

• Windows 7 - there are currently no available connection server to process the logon request

  Hello to all IT experts out there, good day.

  Our company currently a problem recently:
  Problem: Impossible to connect to the pc when outside his functions with Active Directory NT profile/account

  When: January 9, 2012 until today

  The frequency at which this happen: intermittently

  Description of the problem/error: there is currently no available connection server to process the logon request

  How many affected system: 4-5 machines with the same laptop model (HP 8540w)

  O.S Windows 7 64-bit Enterprise and Windows 7 64-bit Enterprise Edition with SP1
  Action taken:
  Area return, group update policy, re - create a profile NT, update BIOS, OS reformatting/reinstall.
  Current solution: connect using the profile/account local and use it at home, back in office, reconnect the LAN and able to connect using NT profile/account and retry again at home.
  More information: our company have model HP range and never receive such problem reported except this model. There are a lot of employees using this model too but yet get affected, now here's some machine assigned to the breast in the same Department, but we have identified if all 3rd party software installed which make changes of protocol network or element (no) and still we could not find any same software installed on these machines.
  What I'm looking for
  ?
  I need some experts advise to identify this regardless of whether a customer number or domain server problem, if the customer, what are the root cause and troubleshooting opportunities we should take
  If the server problem, I'll get assistance by opening a case to our server support team.
  Help, please. Thank you very much.
  One of the affected machine network news:
  C:\Windows\System32>ipconfig/all

  Windows IP configuration

  Name of the host...: XXXXXX

  Suffix main Dns...: XXXXXX.com

  Node... type: hybrid

  Active... IP routing: No.

  Active... proxy WINS: No.

  ... DNS suffix search list: XXXXXX.com

  XXXXXX.com

  Adapter Ethernet Local Area Connection * 17:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Juniper Network Connect virtual adapter

  Physical address.... : 00-FF-10-A0-65-0A

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Wireless network connection Wireless LAN adapter:

  The connection-specific DNS suffix. : XXXXX.com

  ... Description: Intel Centrino Ultimate-N 6300 AGN

  Physical address.... : 00-24-D7-BD-5B-E0

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::79c9:372 has: 7a7c:e4dc % 15 (Preferred)

  IPv4 address...: 130.30.87.80 (Preferred)

  ... Subnet mask: 255.255.248.0.

  Lease obtained...: Thursday, February 2, 2012 07:17:24

  End of the lease...: Friday, February 3, 2012 07:17:23

  ... Default gateway. : 130.30.80.1.

  DHCP server...: 130.27.32.128

  DHCPv6 IOOKING...: 452994263

  DHCPv6 DUID customer...: 00-01-00-01-15-78-C2-8C-B4-99-BA-E9-86-5E

  DNS servers...: 130.27.32.128

  130.27.48.128

  Primary WINS server...: 130.27.152.52

  Secondary WINS server...: 130.29.152.153

  NetBIOS over TCP/IP...: enabled

  Bluetooth network connection Ethernet card:

  State of the media...: Media disconnected

  The connection-specific DNS suffix. :

  ... Description: Device Bluetooth (personal area network)

  Physical address.... : CC-52-AF-88-D9-31

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Ethernet connection to the Local network card:

  The connection-specific DNS suffix. : XXXXX.com

  ... Description: Intel 82577LM Gigabit network connectivity

  on

  Physical address.... : B4-99-BA-E9-86-5E

  DHCP active...: Yes

  Autoconfiguration enabled...: Yes

  Address IPv6 local link...: fe80::e8d1:38 ca: e868:9770% 12 (Preferred)

  IPv4 address...: 130.27.38.17 (Preferred)

  Subnet mask...
  . : 255.255.252.0.
  Lease obtained...: Thursday, February 2, 2012 07:17:08
  End of the lease...: Thursday, February 9, 2012 07:17:10
  ... Default gateway. : 130.27.36.1.
  DHCP server...: 130.27.32.128
  DHCPv6 IOOKING...: 330602938
  DHCPv6 DUID customer...: 00-01-00-01-15-78-C2-8C-B4-99-BA-E9-86-5E
  DNS servers...: 130.27.32.128
  130.27.48.128
  Primary WINS server...: 130.27.152.52
  Secondary WINS server...: 130.29.152.153
  NetBIOS over TCP/IP...: enabled
  Card tunnel Local Area Connection * 20:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: #5 Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Card adapt 6TO4 tunnel:
  State of the media...
  . : Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Card tunnel Local Area Connection * 12:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft Teredo Tunneling adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Card tunnel Local Area Connection * 17:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 adapt #3
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Card tunnel Local Area Connection * 19:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: #4 Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Card tunnel Local Area Connection * 22:
  The connection-specific DNS suffix. : XXXXX.com
  ... Description: #7 Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  IPv6 address: 2002:821 b: 2611:821 b: 2611 (Preferred)
  IPv6 address: 2002:821e:5750:821e:5750 (Preferred)
  ... Default gateway. : 2002:c058:6301:c058:6301
  DNS servers...
  . : 130.27.32.128
  130.27.48.128
  NetBIOS over TCP/IP...: disabled
  Card tunnel Local Area Connection * 21:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: #6 Microsoft 6to4 card
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Reusable Microsoft 6To4 tunnel map:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft 6to4 adapt #2
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Tunnel adapter isatap. {251B844B-9080-4D91-A33C-D644B29D87A5}:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Adapter Microsoft ISATAP #2
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Tunnel adapter isatap. {E7AF5244-8866-4417-BCD4-8A7E8CCBF18F}:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Tunnel adapter ISATAP.SCS.Agilent.com:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. : XXXXX.com
  ... Description: Adapter Microsoft ISATAP #3
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  Post in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Yellow! for VMware network driver after upgrade to server 2003

  We have an older Windows Server 2000 guest who was P2V sometime.  It is one of our domain controllers.   In the process of migrating our AD domain until 2008, I have tried to upgrade this server to 2003 our ad can be in 2003 as part of the move towards 2008.   Long story short, in order to upgrade to 2003 server, I had to remove the old Compaq Network Managment of the machine software.  This software was not in Add/Remove Programs, then I went to the manual way to remove hidden drivers, when still it did not work, I have deleted all entries in registry SEO Compaq network management.  I proceeded with the upgrade, but when the system has finished, the LAN connection is missing, and Device Manager has a yellow explanation point to the NIC for VMware Acceleraged AMD PCInet adapter.

  I recloné and resume the upgrade with only remove entries from registry for Compaq Network MGT.  Yet once, after an upgrade, the same problem appeared with the network card.

  I don't know how to successfully remove the Ghost for the Compaq when the software seems to not exist on the computer.  (nothing in Add/Remove Programs, nothing in C:\program files, start anything in the 'Programs' from the menu list.

  Once I get the error on the NIC card I can't fix.  I tried to reinstall the VMWare driver from the VMTools directory, but that still does not work.

  Not sure about Windows 2000, but IIRC the HP drivers can be removed trough the network card properties!

  Be sure to reconfigure the guest operating system to Windows Server 2003 in the properties of the virtual machine after the upgrade. I had probably also remove the NIC and add an E1000 NIC, which is the default value for Windows 2003 VMs.

  André

• Files on our server disappeared after installed CC

  I hope someone can help me understand how to use them to retrieve the two folders that have been deleted from our server after installing the full suite could creative on the iMac (Designer) and InCopy on four computers (two PCs, two iMacs) editor. Macs are running Yosemite and the Windows 7 PC.

  I now see discussion forums that this has happened in the past, but I hope to find out...

  1. is there a way to recover your files Adobe?

  2. How can I make sure that this does not happen?

  The records in question were named 'Admin' and 'Archives', so I suspect the problem was that Adobe was a conflict with the directory names. But since Admin stored our contracts and Archives had our publication project files of the last five years, it is a big deal. (And don't you know that we have discovered this morning that our backup had been missing for 2 weeks, but no one told us. Grrr!)

  Any help would be appreciated.

  So uncomfortable. Talked to Adobe on the phone support, then to our staff. It seems that someone here has several pop-up windows asking if it was OK to delete these records and she assumed that she should say Yes. At least missing files affect him more than the rest of us... Needless to say that I now turned off the preference of synchronization of file on the computer of everyone!

• How to move a file for download from our server?

  I have some pdf forms that I place on a site, but I got the whole upward as hyperlinks to Web pages so that they opened in browsers. This is not good because PDF files are forms to fill out, and we had many problems with people trying to fill them or print from the browser.

  I want to download the file to their hard drive and open it in Adobe reader. I saw another post that you can point the hyperlink to a file but I don't want to download to my computer, but our server. How do I do that?

  As noted by Dani, by default, the browser is going to decide what to do with a PDF file. Most of the browsers today choose to display a PDF inline.

  There is no seamless way to force a download of a PDF within the Muse, but it is possible to do by writing some PHP or change some configurations on your Web server.

  http://www.southwoodsalt.com/force-browsers-to-download-files-with-link/#.UfvfyBYimS0

  http://StackOverflow.com/questions/2598658/how-to-force-a-PDF-download-automatically

• SSI is not supported by our server - workaround?

  I'm looking for solutions for faster reaction times when changes are needed on the website of our company. To the fact the continuous page number become increasingly more should I quick solutions.

  I had planned on using SSI to include headers, the feet of page and the menus in my pages. The skeleton of the Web pages would be set up in a format and applied to all the pages (to avoid overuse of SSIs and lose the overview).

  SSI seemed to be the perfect solution, and it seemed even be supported by the server of the company (a tick behind an option called "Support for the ISS" in the configuration menu seems simple enough). Unfortunately, during the test (both with a .html file .shtm) the opposite was true. After having contacted the technical support of our server, I got this response:

  "Despite the fact that we have this option in the Control Panel, we unfortunately do not provide support for this feature. This because our areas and sites Web is based on a shared IP address and so this option is unfortunately not possible. »

  (1) I really don't understand how these two depend on each other (SSI and shared IP addresses), so that would be my first question.

  (2) after some internet research, I came across this option: FakeSSI is a Perl program that is supposed to imitate the SSI function, and according to the configuration of my server, I should be able to download the cgi - bin and run it from there. I don't have a clue as to how it works, but nothing can be solved by research, so this isn't really the problem. Where to start the search. That's the problem. In addition, I don't even know if it would be a good idea.

  (3) I already use iFrames on the Web site, who always do their job. Could I not only use iframes instead of SSI? I don't want to use PHP-include, because it would change all files .html to .php files, and I don't want to lose all the external links we have currently out there.

  Any help in the above questions would be greatly appreciated... I thank very you much in advance!

  Now, let's just assume here that I can't change the host, and I'm stuck with a host that does not support SSI. What would be my options to be to get as near as possible SSI?

  Content in a database.  Put your code fragments in a database and pull in the pages.  But you have to bite the bullet and rename your pages with an extension script (for example, PHP, or ASPX or CFM), according to your scripting language.  Try to do these scripts with extensions HTML will be too hard as DW will not recognize the script code.

• upgrade our applications 11.5.7 to R12 manually

  Hello
  I have an idea to upgrade our 11.5.7 to R12 Apps in manually.
  
  Here I'm describing the method. Please suggest me I am Wright or wrong?
  
  Current configuration:
  Apps Version 11.5.7
  DB version: 8.1.7
  Node to use unique rsetup
  
  Place a gradation path
  Apps R12 Version
  DB version 10 gr 2
  Should be the same single node and single-user installation
  
  I want to update my applications manually and want to follow following steps:
  Please suggest me what we can move our applications to R12?
  
  Method
  ·     First, we install R12 (Application and DB both) on the box 'existing '.
  ·     Upgrade database. (Manually)
  ·     Full backup (11.5.7) APPL_TOP, HTM/COMMN_TOP and COMMN_TOP/JAVA
  ·     Restore in high file in new R12 Appl_TOP
  ·     And confine R12 instance level.
  
  
  ANUP

  ANUP,

  You cannot move 11.5.7 directly to R12 you need to 11.5.8 update (or more) first.

  For the database, you can switch to 10 gr 2 provided that you're on 8.1.7.4 or above. If you are on 8.1.7, you upgrade 8.1.7.4 (or higher), and then upgrade to 10 gr 2.

  Once you upgrade the application, refer to the first note below and find the right path to follow to do this upgrade.

  Note: 403339,1 - Oracle 10 g 2 database preparation Guidelines for E-Business Suite upgrade version 12.0.4
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=403339.1

  Note: 362203.1 - version of Oracle Applications 11i with Oracle 10 g Release 2 (10.2.0)
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=362203.1

  The Oracle Applications upgrade guide: Version 11i to 12.0.4 version
  http://download.Oracle.com/docs/CD/B40089_09/current/Acrobat/r1204upg11i.PDF

  Note: 316889.1 - checklist complete for updated manuals at level to 10 gr 2
  https://metalink2.Oracle.com/MetaLink/PLSQL/ml2_documents.showDocument?p_database_id=not&P_ID=316889.1

  Kind regards
  Hussein

• Email IMAP are not deleted on the server

  I searched and found a few similar questions, but no real resolution. Just setup my Backflip with multiple IMAP e-mail accounts. In each case, if I delete an E-mail from the phone and then check with a client on the Office some time later, the emails that I deleted from the phone appear on the desktop and are still on the IMAP server. I also have a sync Corporate account by looking at an Exchange Server and works fine, Emails that is removed from the phone light up on the server. Please notify. Email management/removal is a major requirement of my phone.

  @TwistedNut,

  You can try the K9 email client. In some cases it runs better then the stock email app.

• Upgrade Windows Server 2012 Std to 2012 Std R2 with the same license

  I have an activation key for windows server 2012 Std, can I upgrade windows server 2012-2012 Std R2 with this key? Thank you

  This issue is beyond the scope of this site (for consumers) and to be sure, you get the best (and fastest) reply, we have to ask either on Technet (for IT Pro) or MSDN (for developers)
  http://social.technet.Microsoft.com/forums/en-us/home s/fr-U.S./Accueil
  http://social.msdn.Microsoft.com/Forum

• I would take my existing Server 2008 and upgrade to Server 2012 and the purchase of a virtual server in a data center

  Original title:

  Virtualization server 2012

  I got too many answers to this question. I need the correct answer before buying any CALs galore.

  I would take my existing Server 2008 and upgrade to Server 2012 and the purchase of a virtual server in a data center. I have 25 computers that need to communicate with the server throughout the day, all the different machines. I want to know the best option without breaking the Bank. I permit the data center included in the package to my server.

  Try asking in the Windows Server forum:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer

• Upgrade my Server 2008 r2 Foundation for 2012 r2 Server standard

  Hello world

  Need to know the extra cost to upgrade my Server 2008 r2 Foundation for standard 2012 r2 server.

  How do I do this?

  Thank you

  Prakash Sarkar

  Hello

  Please post your question in Server TechNet Forums.

  http://social.technet.Microsoft.com/forums/WindowsServer/en-us/home?category=WindowsServer

  See you soon.