We found no startup disk or disk has failed.

Similar Questions

• We found no boot disk or startup disk has failed?

  OK, so yesterday my wireless mouse is broken, I restart my computer to get it to work again. When I did, it has not fixed my problem, so I went online to see some solutions. When I went on a secure site, I got an alert on my computer and something about 2 programs being completed. It seemed was going to turn off the computer, and in a panic, I turn it off. When I turned it back on, it went straight to the verification of the startup disk. And it gives me the message: no boot disk was detected or the startup disk has failed. I got it a couple of times before and all I ha do turn off two or three times, and he'd turn out normally. It won't work, and I tried several ways to remedy. I clicked on F2 and F8 a F11, but nothing works, and I do not have a cd with media recovery settings. Any help would be appreciated.

  When you request support, please provide the number of name and/or product of comprehensive model of the HP computer in question. HP/Compaq made thousands of computer models which are all different. Without this information, it can be difficult, even impossible to help you solve your problem.

  Turn on your computer and immediately start typing the appropriate key 'F' to run the hardware diagnostics or system on your computer. Then, run the hard drive test and report the results. If the hard drive has failed or is about to fail, you may need to replace the hard drive. If the hard drive is reported as 'OK', the boot sector, or the hard drive was damaged and the operating system must be repaired or reinstalled.

  You may need to use your HP recovery disks to solve each problem above. If you create your personal series of HP, as suggested by HP recovery disks when you configure your computer... you will need to order a series.

  Please send BRAVO

• Startup disk has failed - what are the options for replacement

  I have a Dimension 8400 BIOS A05 running (if I can remember you corrrectly). The SATA C drive supplied with the system crashed recently and will no longer start up. I tried various diags, but they all fail. I also had a USB drive adapter to try to access the drive from another computer... the disc turns, but I do not see the drive.

  I want to know what constraints and options are there in the choice of a replacement drive? (I wonder if I am limited on ability. The original drive is a WD740GD-75FLA1 (74 GB). Could I replace it with a SATA capacity more (I don't mind if the replacement is a WD drive again or not.)

  And, keeping in mind the BIOS, I must update that when I replace the HARD drive?

  In addition, this good old machine still runs XP SP3 and I plan to switch to Win 7 at the time of the installation of the new disc. Points to consider regarding the choice of the player?

  BTW - some time after the purchase of this PCI added a second drive hard - one 250 GB SATA drive. Do I need considered as in the choice of the total capacity of the disk online, I will be once the new drive arrives? Oh, and although I don't speak of this second disc - it works fine with the USB adapter so my problem looks like most likely to be a disk problem rather than say, a question of power cable or block.

  Thanks in advance for your comments.

  Andy

  Any standard desktop SATA drive under 2 t fine - having said that, what you have now is a WD Raptor 10 K RPM drive.   They are now called Velociraptor - if you are looking for this level of performance of the player, they are the only SATA 10 K rpm disks designed to use desktop.

• Windows Setup is unable to find a place to store temporary installation files. To install windows, make sure that a partition on your startup disk has at least 686 MB of free space

  Current operating system: Win XP

  New version: Win 7 Home premium downloaded from digitalriver (student version)
  The download went well and expanded on in the expandedSetup folder. When I click on the button 'Install now' on the configuration screen, it displays error
  "Windows Setup cannot find a location to store temporary installation files. To install Windows, make sure that a partition on your startup disk has at least 686 MB of free space. »
  The unusual thing only that I have in this facility, it is that I "shrunk" the volume existing XP windows C: 228 GB to 150 GB to make room for the new partition W: for windows 7.
  Here is the my drive details
  Total
  Disk 0
  Letter of free space size
  c: 150 GB GB 48.3
  W: go-go 78.0 78.1
  I: 54.7 47 MB MB (seems to be the DELL diagnostics dell partition)
  J: 4.63 GB 959 MB (seems to be the DELL partition with the original copy of OS)
  Disc 1
  free space of letter size
  M: g 78.1 29.8 GB
  N: 39.0 go-go 22.8
  X: 21.8 31.7 go-go
  Thank you
  Muthu
  I found the fix - made a bootable disc from the "expandedSetup" directory and booted from the disc. Look for the startup disk process in the solution of this tread

  http://social.answers.Microsoft.com/forums/en-us/w7install/thread/aedb1245-f8f9-42EC-9A0C-1aa932363bbb

• "SiSUSBrg.exe.exe - Unable to locate component" appears at startup. "This application has failed to start because SIS_Lib.dll is not found."

  Original title: SiSUSBrg.exe

  "SiSUSBrg.exe.exe - Unable to locate component" appears at startup. "This application has failed to start because SIS_Lib.dll is not found."

  Hope that this is not a virus!  Help?

  Hello

  I suggest you to follow these steps and check if that helps:

  Method 1:
  Start the computer in safe mode and check if the same problem occurs:
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/boot_failsafe.mspx?mfr=true

  Method 2:
  Try to perform the clean boot and check if it helps:
  http://support.Microsoft.com/kb/310353
  NOTE: When you are finished troubleshooting, make sure that you reset the computer in start mode normal such as suggested in step 7 of the above article.

  It will be useful.

• Startup error: "this application has failed to start because google desktop common.dll not found."

  Original title: google desktop common.dll

  When I turn on my computer is the first thing that lights up, this application has failed to start because google desktop common.dll not found. Re-installing the application may fix the problem. How to fix this problem? What do you do? or you re-install.

  This error message means that a Google application that requires the file 'google desktop common.dll' could not start because the file is missing. The first step to solve the problem is to identify the application that is using this file. Do you use Google software (ie: Google Chrome, Google Sidebar, etc.)? If Yes, what are the software you use?

  We will work from there,

  Rifdhan

  If this is your answer, click on "Mark as answer" below. If it's useful, click on "Mark as useful" on the left.

• A6700y hard disk has failed, I can buy a new drive, but where can I get a disk to re - install

  My computer did not come with an installation disc and I have no recovery disk. I want to buy a hard drive more for Vista 64-bit, but want to know where to buy a disc re - install or restore the disk to install the old system on the new drive... Thank you

  Yes, a new tough guy of the same size and a set of recovery discs should fix you all this.

  Frank

• Reinstall the premier 11 elements after the original installation disk has failed. Error 1327.Invalid Drive

  I'm trying to reinstall Adobe Prime Minister 11 elements of DVD on a 64-bit Windows 7 system.  The player who welcomed my original instance failed.  It was installed on a secondary drive, E that, unfortunately, is no longer with the system.  In the resettlement process I'm removing the original instance, as seemes to be mandatory, but I enconter error "Error1327.Invalid Drive: E:\'." "

  How can I get Adobe Prime Minister 11 items on my system?

  Note: A similar problem with Photoshop Elements, except that none of the errors are detected, it just will not start as he seems to have pointers to the failed drive.

  I used CCleaner to clear up any reference registry for two installations of problematic items, and I reinstalled the.  There was a lot of entries, but they were all marked as problems by the tool, as they were easy to find.  Thanks, Mylenium.

• Need help with the disks 'unreadable' configuring software raid after the death of the startup disk and system restored.

  I'm looking for some advice on how to restore a windows xp installation software raid 5 that was running on my XP system. I had a problem when the startup disk has failed, but I was able to backup the system before it can. I replaced the drive and restored the system and everything came, but I was not smart to do this and accidently left the readers connected when restoring raid. I don't know if windows has done something when I tried to install XP on the new drive, or maybe something else has happened when I restored the system from the backup, but my raid drives can not be used. There was a moment in the restaurant business I saw a message on the MBR, but I thought that was just for the drive being restored. I didn't have a single player who held any information on the other disks in the system, but I'm not 100% sure on that.

  When the system boots the windows logo screen takes 10-20 minutes before you get on the desktop. Windows Disk Manager takes 20-30 minutes to fill the list of drives and status on the disks three raid is 'dynamic' and 'unreadable' is not reassuring. I suspect it's a problem MBR or partition table that must be corrected before trying to reactive the raid, but this is just speculation.

  The raid drives are on a promise ide/scsi disk and make it appear to start correctly with names and sizes. After that I get nothing. I do not have another scsi controller (or), but I thought I'd try active @ partition recovery to see if she can find information on the disks.

  I hope someone has some experience with recovery like this, because this is a first for me. I thought I was pretty sure running a raid-5, but wouldn't you know, the tech gods have found a way to crush my plans...

  Thanks in advance for any help!

  Hello

  Thank you for visiting the Microsoft answers community site. Your Windows XP question is more complex than what is generally answered in the Microsoft Answers forums. It is better suited for the IT Pro TechNet public. Please ask your question in the TechNet Windows XP IT Pro Forums.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• Repair your startup disk Bootcamp disappearing after you create the new partition

  . After some research, I found that it was the way forward to create a separate partition, and so I did another partition.

  I didn't know it would affect my Windows partition that I thought it was completely different.

  So now, when I start it up, there is no option to start with Windows. But when I boot the Mac and select Startup disk, it displays Boot Camp is still there, and all my files etc. are still there.

  I tried to create one separate partition (other than Bootcamp). After that its done and I started my computer, I found that the option to boot Windows (Bootcamp startup disk) has disappeared. But I still see boot camp Mac files. Any solution for this? Thank you.

  (I tried to find this solution on the discussion Forum, and I found: repair Boot Camp after having created the new partition, however, I'm not able to follow these instructions. any help would be appreciated)

  For reference:

  Aerospews-MBP: ~ the marcuslo list $ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 500,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_HFS Macintosh HD 350,7 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650.0 MB HD

  4: Apple_HFS 47.6 Untitled GB disk0s4

  5: Microsoft database BOOTCAMP 101,0 GB disk0s5

  Aerospews-MBP: ~ list of cs marcuslo$ diskutil

  No logical volume group CoreStorage found

  Aerospews-MBP: ~ marcuslo$ sudo TPG - vv - r show/dev/disk0

  See the TPG: / dev/disk0: mediasize = 500277790720; SectorSize = 512; blocks = 977105060

  See the TPG: / dev/disk0: PMBR to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 977105059

  start index size summary

  0 1 PMBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 684969040 2 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  685378680 1269536 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  686648216 92929128 4 part TPG - 48465300-0000-11AA-AA11-00306543ECAC

  779577344 262144

  779839488 197265408 5 part TPG - EBD0A0A2-B9E5-4433-87C0-68B6B72699C7

  977104896 131

  977105027 32 table dry GPT

  977105059 1 dry GPT header

• Anyway to face disconnected VMWare Converter startup disk?

  I have a computer that is dead, and I want to virtualize the computer.   Is it possible to use any version of VMWare Converter steering on a boot device that belongs to a different computer than the one currently loaded?    The boot device in this case was SATA, and we would just climb as boot device as a disc of data on another computer.

  It seems that VMWare Converter has a coded hypothesis hard it can work as an administrator in the OS environment started it virtualizes, but I hope that there is another way to execute to achieve desired virtualization.

  The following procedure will not work if the startup disk has a Windows operating system.

  1 lauch Workstation right-click of the icon and use "run as Administrator".

  2. create the new virtual machine
  3 assign the physical disk instead of the one given by the wizard.
  4. do not start the virtual machine
  5 lauch converter via "run as Administrator"
  6. Select the option "set up the machine" and select the vmx file - you just created with workstation.

  If you do not want to run the virtual machine from the external drive use vmware-vdiskmanager and convert the vmdk you created in step 3 in a normal vmdk.

• How to "Windows did not start because of a configuration of the disk of the computer problem. Could not read the selected startup disk... "on a netbook without a CD/disk drive?

  I did a lot of research and unfortunately havnt found a road toward the front of the detroit to a fix. Long story short... I installed Jolicloud as a dual boot with windows xp on netbook gateway of my wife. This netbook has no cd/dvd drive. Jolicloud wanted to screw up the startup option to not allow me to boot into windows, going Strait to jolicloud without option of windows. I tried to change it via the "menu.lst" and Grub.cfg file (I think) the only value I changed was I think 'boot... ". ' value between 1 and 2. When I restarted, then finally got a startup list (although I don't think that my modification of the value gave me the list, I had already installed manually "Grub" via the cmd prompt. I should have just restarted from there without changing anything else... because when I chose 'windows xp' in the start menu... He gave me a black screen and kept going back to the start menu. Then, I tried the "Vista loader" option... hoping that it would some how solve my problem... He asked me if I wanted to run a repair any. I agree with him and when he finished he told me that there is no enough space on the hard disk to copy the files (or something like that) then it froze kind of there. I had to do a hard reboot after that that it froze, then I got the code "Windows did not start because of a computer disk configuration problem. Could not read from the selected boot disk.  check the hardware path and startup disk, please check the windows documentation about hardware disk configuration and your hardware for more information reference manuals.

  Again, I have no drive cd/dvd on a netbook... IM assuming that im going to have to return a key USB with windows boot info to load the Manu F2 at startup... But I do not know... Help, please. Thank you

  Hello

  Follow method 1 and 4 in the article below and check if that helps resolve the issue.
  Error message: "Windows did not start because of a configuration of the disk of the computer problem.
  http://support.Microsoft.com/kb/314477/en-us

  I hope this helps.

• Windows start error. Root cause: no OS file found on the disk.

  My computer shows a blue screen all of a sudden, but I can't capture it. Then when it restarts, it entered the Startup Repair and it performs some tests, the other components is good but at the bottom of the diagnostic and repair details it says this:

  Root cause found:

  ---------------------------

  No OS found on the disk file.

  Repair action: Partition table repair

  Result: failed. Error code = 0 x 3

  Time taken = 6053ms

  ---------------------------

  ---------------------------

  While in the result of the diagnosis
  It shows:
  [Suspected party troubled] Hard drive
  [Error code] 2109

  Hard drive may have a hardware problem
  Please contact the Service Centre

  Can I find out if there is no possible solution to fix it and recover the data?

  Hello

  Go to the website of your computer manufacturer > search your computer specifications > know brand of hard drive > access the Hard Drive manufacturer's Web site > find and download hard drive Diagnostic software and make a record of start of it on the computer that you use to get here, following their instructions > test your hard drive to see if it has failed.

  And you can also use this method to test your hard drive:

  "SeaTools for DOS.

  http://www.Seagate.com/support/downloads/SeaTools/

  "SeaTools for BACK tutorial.

  http://knowledge.Seagate.com/articles/en_US/FAQ/201271en

  ________________________________

  And how do you try to back up your data.

  Saving your files:

  You can remove the hard drive and put it in a hard drive USB enclosure > plug it into another computer > and try to read and copy your data in this way.

  Or, you can download Knoppix > make a bootdisk to > start your system with it (IF your material is all work) > and copy your data from the hard drive like that.

  http://Knoppix.NET/

  "How to use Knoppix.

  http://Lifehacker.com/192982/geek-to-live--rescue-files-with-a-boot-CD

  See you soon.

• Startup disk

  I went to the iStore to get a software update, and once this has been done, my boot on my MacBook drive now shows the name of the previous owner? For example: "Sarah." And my boot drive has been moved to 'deleted users '. Please see attached screenshots. All my images, etc. always are on my Mac. Does it matter if I am using the previous owners startup disk? Clued up too much on such things, so if anyone could give me some advice, it would be a great help! Thank you

  Don't know why your user folder has been deleted, but it sure sounds like the Mac is still signed to Apple ID from the previous owner and not yours.

  It was not properly prepared for the change of ownership, see: https://support.apple.com/en-us/HT201065

• Unable to overcome error - "the startup disk cannot be partitioned or restored to a single partition.

  Hello!

  I'm trying to install Windows on my iMac (late 2013, running 10.11.6) without success.  I created the ISO to a flash drive, but when I try to use the Assistant Boot camp, I am referred to the following screen:

  

  I did my best to study solutions. The cause, by apple support discussions, is that there is another partition of pre-empting (stop) the wizard boot camp partitioning the hard drive.  I studied the partitions on my HDD after unplugging all devices and found this:

  

  This shows the main partition: Macintosh HD, the bootcamp partition: BOOTCAMP; and 2 unknown partitions: "Apple HDD ST100DM003 Media" and the same * M004.  I was able to delete the first Apple ST100DM003 HARD disk partition and ran first aid on the fusion drive after that the second he would not remove.  Also, I can't delete the boot camp partition.  I keep getting the same message when I try to install windows on a partition of the fuser unit using Boot Camp Assistant - "Startup disk cannot be partitioned or restored to a single partition".

  Any suggestions?

  Please after the release of the following OSX Terminal commands.

  diskutil list

  Cs diskutil list

  A reader of merger should have underlying EFI, OSX, Recovery HD on each of the physical disks. If your previous Windows installation attempts have failed, the disks can leave in a State where BCA use/will not change them.