We get the error in C:\Windows\System32\CCM\ccm.log when installing ccmclient in all positions below.

Similar Questions

• Printer not working, get the error 'Module C:window\system32\spool\drivers\w32x86\3\lxdodatr.dll and dmrclibrary.cpp Microsoft visual C++ runtime '.

  I get following errors: Module C:window\system32\spool\drivers\w32x86\3\lxdodatr.dll and dmrclibrary.cpp Microsoft visual C++ runtime Windows 7

  Please stand out as the answer. What is the number and the model of your printer (Lexmark)? You can try to uninstall and reinstall the printer driver.

• Get the following message.c:\windows\system32\ddrawex.dll isn't is either not designed to run on windows or it contains an error

  My screen to count keeps blinking and I get the above message. I'm trying to update my activex announcement of directx, but nothing works. The activex was told that it was not recommended for my computer. What can I do? I was told to try to install the program again, but I don't know the original installation media. I don't know what to do and the flashing makes me crazy. Thanks, Chris150

  * original title - continues to Flash the screen of my computer and I get the following message.c:\windows\system32\ddrawex.dll is either not designed to run on windows or it contains an error. Try to install the prgram using the original installation media. *

  My screen to count keeps blinking and I get the above message. I'm trying to update my activex announcement of directx, but nothing works. The activex was told that it was not recommended for my computer. What can I do? I was told to try to install the program again, but I don't know the original installation media. I don't know what to do and the flashing makes me crazy. Thanks, Chris150

  Hey chris150

  on the link below, there are a few different methods to try to see one that works for your problem

  see if one of them will help you

  http://pcsupport.about.com/od/findbyerrormessage/a/ddrawes-DLL-not-found-missing-error.htm

  Walter, the time zone traveller

• Windows Vista startup in the Boot Manager Windows Im getting the message of File:\windows\system32\winload.exe and this isn't the start of the DVD

  Original title: Windows Vista upgrade to Windows boot disk boot manager is located in the computer but will not start up installation disc

  Im getting the message of File:\windows\system32\winload.exe

  Hi WillieGuyton,

  (1) since when are you facing this problem?

  (2) remember to make changes?

  (3) what is the complete error message you receive?

  (4) what is the number of brand and model of your computer?

  Method 1:

  Step 1: disconnect any external devices (printers, scanner, USB (universal serial bus) readers, etc...)  Except the keyboard and mouse and then start.

  If this solves the problem, then add back devices at a time until you discover the piece of hardware causing the issue.  Then get any drivers\software update for the device.

  Step 2: Follow the steps mentioned in the link below to access pre - install the system recovery tools.

  How to access the System Recovery Options menu?

  Run the tool to restart system as shown in the link below
  How to use Startup Repair?

  
  Method 2:

  Step 1:

  Set the first boot device in the DVD in BIOS to boot from the Windows Installation DVD. To do this, see the documentation that came with the computer.

  Important: Change BIOS (Basic input output system) /semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.

  Step 2: Follow the steps mentioned in the article below for the restoration of the Boot Configuration database (BCD) store

  Windows no longer starts after you install an earlier version of the Windows operating system in a dual-boot configuration

  http://support.Microsoft.com/kb/919529

• When I go to install Silverlight, I get an error message C:\Windows\system32\samcli.dll error message.

  samcli.dll

  I try to use Netflix... It worked last night and when I went to play today it asked me to install Silverlight... when I go to install Silverlight, I get an error message C:\Windows\system32\samcli.dll error message. I tried to uninstall Silverlight and reinstall it using Revo Uninstaller Pro and still, I get the same error message. You can provide any help would be greatly appreciated.

  Thank you

  Lisa

  samcli.dll is associated with Security Accounts Manager Client and not with Silverlight.

  Download this dll from here: -.

  http://www.dllme.com/dll/files/samcli_dll.html

  Now, replace the dll file that is corrupted with the dll file you downloaded here: -.

  C:\Windows\System32

  [Note: it is a hidden file, so you must enable Show hidden... files]

  [Organize--->---> the folder options view and search]

• Whenever I do a right click on a file I get the error message that Windows Explorer has a problem and needs to close

  original title: problems of files

  Whenever I do a right click on a file I get the error message that Windows Explorer has a problem and needs to close.

  Sometimes, the problem is caused by a third-party extension. ShellExView can be useful to see what shell extensions have been introduced in the Explorer. Lire read on this topic, then scroll down to download the x 86 (32-bit) or x 64 (64 - bit) version here near http://www.nirsoft.net/utils/shexview.html

  When you run it, click the column of company for sequence entries in alphabetical order. Suppose Microsoft entries are in good faith and focus on others. Is something listed that is useless or unknown? If so, select it and click the Red (on top left) task to turn it off. You can find more easy to disable them all and then reactivate (green area) one at a time and Explorer of execution until the culprit is found.

• I have an 0xC0070678 error code, I uninstalled AVG and reinstalled and now get the error message internal General. MSI engine failed to install the product. Help

  I have an 0xC0070678 error code, I uninstalled AVG and reinstalled and now get the error message internal General. MSI engine failed to install the product.  Now I have no anti virus.help please

  Hello

  It is a specific error of the AVG software. There are number of threads on the same topic on the forums of AVG.
  Reference:
  http://forums.Avg.com/us-en/AVG-free-forum-search?sec=search&Act=show&ID=0&Search=1&type=posts&user_nick=Davo1330&subthemes=1

  http://forums.Avg.com/au-en/AVG-free-forum-search?sec=search&Act=show&ID=0&Search=1&type=posts&user_nick=pcroft&subthemes=1

  See also:
  If you have problem install/uninstall/upgrade to update AVG: AVG 2011 + 9.0 + 8.x uninstall / re-install Instructions
  http://forums.Avg.com/ww-en/AVG-Free-Forum?sec=thread&Act=show&ID=110317

  I hope this helps.

• Get the error message "Microsoft MSXML 4.0 or higher, not installed" when you use Nero Software

  Original title: using Nero Software on Vista service pack 2.0 and get error Microsoft MSXML 4.0 or not installed.  In my view, the folder is empty, I programs and I can simply download to Microsoft?

  Using Nero Software on Vista service pack 2.0 and get the error Microsoft MSXML 4.0 or higher is not installed.  I find that the MSXMLfolder is empty.  NERO software worked very well and I have no recollection of doing an update of MS or NERO, so don't know why it doesn't all of a sudden.  Do I create programs and can simply download the modules of MSXML from Microsoft?

  Hello

  Download and install the package manually and check.

  http://www.Microsoft.com/en-US/Download/details.aspx?ID=15697

  Hope this information helps.

• I get the same updates for windows, it seems to download and install properly but then next day return.

  I get the same updates for windows, it seems to download and install properly but then next day return.

  Hi Graxx101,

  ·         Did you do changes on the computer before the show?

  ·         The updates are installed successfully?

  Follow the steps in the article.

  Windows Update or Microsoft Update repeatedly offers the same update

• Get the error message on Windows XP dwshk36.ocx

  Original title: dwshk36.ocx

  I get error message dwshk36.ocx.   Help!

  Clarah salvation,

  1. When you get this error message?

  2 - does this happen when you try to open any specific program?

  Method 1:

  Step 1:

  You can try to boot in safe mode with network and see if you are able to access files and folders.

  You can check the following link to start in safe mode with networking

  http://support.Microsoft.com/kb/315222

  Step 2:

  You try to perform a clean boot. A clean boot to check if startup item or services to third-party application is causing this issue.

  You can read the following article to put the computer in a clean boot:

  http://support.Microsoft.com/kb/310353

  If your problem is resolved after the clean boot, and then follow the steps mentioned in the article above to refine the exact source.

  After you have used the boot is a way to solve your problem, you can follow the steps to configure Windows XP to start normally.

  Method 2:

  You can also check the following link and complete the scan line on your computer to check whether your computer is infected with a virus or not.

  http://OneCare.live.com/site/en-us/default.html

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• No sound - get the error no active mixer device or no audio device installed

  Original title: downloads for devices sound cards/audio/active mixers
  Hello, I got my laptop crash currently and when I came back, I have no sound except for the beeps. I can't hear CDs or audio files on different Web sites. I can livestream and see a video, but not hear. I plugged headphones and have the same results. I get the error codes are no active mixer device and there may be no audio device installed. I have a windows xp operating system. I don't know where to go to start a download for sound cards.
  Thank you.

  Miloz

  We can try to install the drivers manually. It seems that every time that your device has crashed, someone reloaded Windows without having to install the device drivers.

  Let's start by trying to install the audio driver first. This one we might have to do it manually, but the others should be automatic. This gives a test:
  1. go to: http://downloads.sourceforge.net/sevenzip/7z465.exe and download the 7zip archive manager
  2 download, register, and install the utility on your computer
  3. once the utility installed, go ahead and re - download the audio driver package
  4. save the package on your desktop (or somewhere easy to access)
  5. once the package downloaded, find him, do a right click and choose "extract here...". "or something similar in nature. Basically we will extract the contents of the package and install it manually
  6. once the content is extracted, click START
  7. in the menu START, right-click on "Computer" and choose "Properties".
  8. in the upper left corner, click on Device Manager.
  9. find your Multimedia Audio Controller, right click and select 'Update Driver'... »
  10. click on "Browse my computer for driver software".
  11. click on the button 'Browse' at the top
  12. place where are the files extracted from this driver package
  13. Browse in the folder extracted and select the listed file. If there are several of those who choose an and and if it's just, the Setup will continue. If this is not the case, the installation program displays and error and then you just go back and try the alternate
  14. from there, the installer should walk you on the rest of the steps to manually install the driver package
  As far as your other drivers go, I would recommend going to the bridge site and looking for a driver of Modem for your computer model. The audio driver should be supported at this stage, and the Ethernet driver can be a joint wireless adapter you have. You may need to find a driver for it on the site of the gateway, OR if you bought the adapter you need to go to the device manufacturer's Web site and get you a driver there.
  Let us know what happens
  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How to solve the error due to windows system32 mfc42u.dll

  How to fix error in windows vista x 64 in the windows system32 mfc42u.dll file?

  You don't say what effect this has on your system.  You try to install or to upgrade to Windows?  When the message appears?  Help us out with some details, please.

  The dll may itself be damaged so try using the repair system file checker.  Click Start, type "cmd" in the search/Run box and right-click on the CMD icon at the top of the results pane.  Select run as administrator.  When the cmd window type "sfc/scannow" at the prompt and press ENTER.  When the scan is finished, close the cmd window.

  If it comes from occurring during normal operation, you must use the system repair and recovery forum in the

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system?page=1&tab=all

  This forum is for the Windows installation.

• Start my computer and I get an error message: C:\Windows\System32\mmc.exe

  original title: C:\Windows\System32\mmc.exe

  start my computer but I can not access all programs or windows

  Hi DesireeGarcia,

  ·         You get this message at Windows startup?

  ·         What happens when you try to access programs?

  ·         Have you checked the problem in safe mode?

  Step 1: Try to start the computer in safe mode and check if the problem persists.

  Step 2: If no problem occurs try to perform a clean boot. Refer to the below article mentioned on how to do it.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  Note: make sure you put the computer to a Normal startup, once the troubleshooting completed.

  Please respond to the results and more information, so we can help you better

• Linking the local ID to the user (e-mail) online account - I get the error message in Windows 7

  I tried to link my local user account with my Windows Live account and get an error on the RPC server not found message. I want to connect with my Windows Tablet that I've linked to my Microsoft account and want to do the same thing with my Windows 7 PC.  When I click on add the ID I am sent to the download page of Windows that says: I'm to download Windows 7 ID Wizard, but which actually download is Windows Essentials 2011 and files do not include an assistant nor does it include Live Mail.

  I use Outlook 2010 vs Live mail on my PC. That's the problem with a link to my online account?

  I know that the wizard comes with Essentials, but I thought it was also available standalone.  Let me dig on my Windows 7 machine when I get home. I also like that the link obsolete even: the new Essentials is 2012. Which in fact, it is perhaps worth a try. Go to http://get.live.com and start the download and see if you get the companion and then can just uncheck all others adverse (unless you want it, some of these apps are decent).

• Where can I find the _RunDLLEntry@16 file? New Windows 7 and received the error in C:\Windows\system32\spool\DRIVERS\x64\3\LXCEtime_dll

  Just bought new computer HP desktop and when opening under a user account (administrator or Standard user) receive error RunDLL error message in C:\Windows\system32\spool\DRIVERS\x64\3\LXCEtime_dll.  Entry: _RunDLLEntry@16

  Any help is appreciated.

  DJ

  Hello

  LXCEtime.dll is a Lexmark file. If you have Lexmark/software installed on your computer, uninstall and reinstall the hardware/software Lexmark should solve the problem.

  See also: Add or remove a printer

  http://Windows.Microsoft.com/en-us/Windows-Vista/add-or-remove-a-printer