Web came does not

Similar Questions

• Web Cam does not work on my Satellite Pro C850-10 t

  Hey, I have a Satellite Pro C850-10 t and my web cam does not work. Whenever I try to use it, it is said that the built-in cam is not connected or activated. I tried to download the drivers from the site web cam, but it does not solve the problem

  What should I do?
  Thanks in advance :D

  Do you use the preinstalled original WIN7 64-BIT HOME PREMIUM?
  Webcam is entered correctly in the Device Manager?

• Vista 64-bit now I changed my OS 32-bit now my web cam does not work, tried to get the drivers from dell but did not help

  of the vista 64-bit now, I changed my OS to Vista 32 bit , now my web cam does not work, tried to get the drivers from dell, but they are not available there. My laptop is studio-1537... Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Hello

  I check your firewall settings to see if it can cause a conflict with the season chat software.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Satellite L500 - Web Cam does not work

  Hello.

  My book built into the camera, and that camera thos not inicialize,

  I have ave made a HARD drive recovery, and after the web camera software was not installed. I downloaded this software one of the device drivers and it instaled in the laptop, but the camera, but the camera does not work.

  Is there a way to fix it?

  Thank you.

  The question is: is cam material recognized and detected by the system or not?
  You can see in the Device Manager?

• USB 20.0 M pixels 6 LED Webcam Web Cam does not?

  Recently I bought this webcam for my laptop, 20.0 MEGA pixel 6 LED Webcam Web Cam camera computer. In fact, I bought two one for me and one for my son and have not been able to get them to function. When I plug the usb and microphone cable, it tells that the new hardware has been found and it is to install the software of the new device. It complements and says device is ready to be used, but the camera does not work. The microphone works without problem, I tried reistalling the device a couple of times and in different ways without success. I tried unisnstalling, resettlement, adding hardware, etc.
  The camera stands out in Device Manager as a camera USB 2.0 in imaging equipment and records of cable into the USB as a Composite USB.
  Does anyone have ideas to make the camera work? I would really appreciate it!
  Running Windows Vista thanks

  Thank you Robert Charney

  Hello

  If the webcam appears in Device Manager, idon't think that you will need special software for the cable.

  You could try the cam with Live Messenger.

  If it fails, you can get an error message more information.

  Chris
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• How can I get my Crystal eye webcam icon, my web cam does not work.

  Please help me; to my 'sex cam Crystal eye' work. Thank you.

  Hello

  1. have you made changes on the computer recently?
  2. what happens when you try to use the webcam? You encounter any error message?
  3. what operating system is installed on your computer?

  I recommend you update the drivers for the webcam and then check out.
  http://us.Acer.com/AC/en/us/content/drivers

  Important note: This response contains a reference to third party World Wide Web site. Microsoft provides this information as a convenience to you. Microsoft does not control these sites and no has not tested any software or information found on these sites; Therefore, Microsoft cannot make any approach to quality, security or the ability of a software or information that are there. There are the dangers inherent in the use of any software found on the Internet, and Microsoft cautions you to make sure that you completely understand the risk before retrieving any software from the Internet.

  I hope this helps.

• HP pavilion g series.hp web cam does not work anymore

  Webcam HP does not

  Please help me fix my web cam

• my built in web cam does not work, why. I had working for minute, but moved to the screen and he went

  my web cam isn.t work. When I turn on it says make sure it is turned on. How do I do that? Once when I clickrd on the icon, it came on but exploded when I moved to the screen. Now, I can't get it working again.

  Thanks for the help

  Hello

  
  1. What is the brand and model of the computer?
  2. you receive an error message or error code?
  
  Try the following and see if it helps.
  
  Method 1:
  
  Run the hardware troubleshooting tool.

  Open the hardware and devices Troubleshooter: http://windows.microsoft.com/en-us/windows7/Open-the-Hardware-and-Devices-troubleshooter

  Method 2:
  Step 1:
  Check if the webcam driver is listed in Device Manager
  Step 2:
  
  Try to disable the webcam and then turn it on and check if it helps.
  a. open the Device Manager.
  b. click on imaging devices.
  c. right-click on the Webcam device.
  d. Select Disable.
  Note: Try the steps up to the c and select on to activate the webcam.
  Method 3:
  
  I suggest you install the latest updates for Webcam and check if it helps.
  
  Update a hardware driver that is not working properly: http://windows.microsoft.com/en-us/windows7/Update-a-driver-for-hardware-that-isn ' t-work properly
  
  Note: If you still have the problem then I suggest to uninstall and reinstall the webcam software and check if it helps.
  
  Uninstall or change a program: http://windows.microsoft.com/en-US/windows7/Uninstall-or-change-a-program

• built in web cam does not work

  Right so my built in camera is not working, I have an advent modena m101.

  When I press fn + f7 is no function but the sign of web camera is always says the roundabout turns even now. I tried the update that it didn't work. any help will be good

  Hello

  Sound like there may be hardware problems so check with a real computer store
  (the advent of services internal) or the Support of Advent (see links below).

  Troubleshoot camera connection
  http://Windows.Microsoft.com/en-us/Windows7/Troubleshoot-camera-connection-problems

  You probably need to reload the drivers of the device and any camera (general control software
  included with the drivers and installed at the same time).

  Login as an administrator.

  Control Panel - Device Manager - Imaging - write down of the brand and the model of camera - double
  Click on it and on the tab of the driver is version. Now, click on update drivers (who cannot do anything
  that MS is far behind the drivers of certification). The RIGHT CLICK on the camera - UNINSTALL
  -REBOOT - it will refresh the driver stack.

  Now, go to the system manufacturer's website and download the latest driver of the camera and other partners
  the camera software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each
  pilot.

  Manually look at the sites of the manufacturer for drivers.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  Installation and update of drivers to 7 (updated drivers manually using the methods above
  It is preferable to ensure that the latest drivers from the manufacturer of system and device manufacturers are located)
  http://www.SevenForums.com/tutorials/43216-installing-updating-drivers-7-a.html

  Then let windows updates on however prevent loading of drivers that are often
  older than those that you have installed. If updates suggests a pilot can HIDE and watch
  manually to see if their really is a more recent version (both system and the manufacturer of the device manufacturer
  sites).

  Stop Windows 7 to automatically install device drivers
  http://helpdeskgeek.com/Windows-7/stop-Windows-7-from-automatically-installing-device-drivers/

  How to disable automatic driver Installation in Windows 7 / Vista
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/

  Turn off Windows Update Device Driver search prompt in Windows 7 / Vista (for professionals,
  Ultimate and Enterprise)
  http://www.AddictiveTips.com/Windows-tips/disable-Windows-Update-device-driver-search-prompt/

  ----------------------------------------------------------------------------

  Check with the advent of support, their online documentation and drivers (update or reinstall),
  and their forums.

  Advent Computers - computer science daily
  http://www.adventcomputers.co.UK/everyday-computing

  Advent computers - support (Note: there are 2 pages)
  http://www.adventcomputers.co.UK/product-support

  Support of the unofficial advent - Forums
  http://www.adventsupport.com/

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

• Web camera does not work on Satellite L50D

  Satellite L50D-B-136
  Try got the camera web get to work, without success.
  Apparently, web camera initialization failed according to Toshiba Web Camera Application.

  Check the BIOS settings please. Less advanced > system configuration you can find the option to enable/disable webcam. Check please if your webcam is properly enabled.

• Web camera does not work on my Qosmio laptop

  My webcam does not work... Does anyone know how I can make it work in messenger and others? I can only take pictures and record with her... It would be nice to be able to use it as a webcam as he said that I can.

  My laptop has had similar problems with messenger and webcam.

  I installed the new driver webcam chicony on the Toshiba site and installed this patch: http://support.microsoft.com/kb/934374, problem solved :)

• HP Pavilion dv4 Web Cam does not work after last update SP2

  I downloaded the latest drivers from the HP website, but still no luck. Web cam applications says cannot find a camera.

  Nasir.

  https://support.Microsoft.com/OAS/default.aspx?PRID=13014&Gprid=582034&St=1

  Free unlimited installation and compatibility support is available for Windows Vista, but only for Service Pack 2 (SP2). This support for SP2 is valid until August 30, 2010.

  Microsoft free support for Vista SP2 on the link for your Webcam with SP2 problem.

  See you soon.

  Mick Murphy - Microsoft partner

• my built in webcam used to work, but I think that one of my kids deleted something and now my web cam does not work what do I do

  my built in webcam does not work.i one of my kids deleted some how and now it does not work what do I do

  Hello

  Try doing a system restore. Go to the SEARCH bar and type system restore.
  Once the System Restore screen, select a restore point (it must be before the problem occurred), launch it. Check.
  You can also update the drivers of your computer (the webcam driver). If you do not know how to locate, you can use RadarSync to find out-of-date drivers.
  David

• Web camera does not, windows vista on a computer laptop toshiba a300 satellite

  I was wondering if you might know how to solve my problem.  Recently, I restarted my laptop and have had problems with the installation of Service Pack 2.  However, he miraculously installed on the computer today and once rebooted after the installation of Service pack 2, it has now in an error box "the webcam driver open fail.  "Please restart camera or computer.

  I restarted the computer and there no resolver question and I can't open or find the webcam in my control panel and can not find if the driver has been corrupted or another.  Any help would be greatly appreciated.  Thanks a lot :)

  Hi Zam,

  I suggest you to follow the steps and check if it helps.

  Method 1: Download the latest driver for your Webcam from the link and check if it helps.
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp?service=EU

  Method 2: You can also try uninstalling and reinstalling the drivers of Webcam and check if that helps.

  (a) click Start, click run, type sysdm.cpl in the Open box, and then click OK.
  (b) click on the Hardware tab.
  (c) click the Device Manager button.
  (d) search of Webcam.
  (e) right click on the webcam, and then click Uninstall to remove.
  (f) restart the computer, and then reinstall the driver for the webcam.

• Pavilion dv7-1245dx Hp TrueVision HD web cam does not. It has worked before.

  Thinking that it is a hardware driver not knowing how to find the TrueVision HD internal.  I used the viewfinder to see if all the drivers are up to date.  Used hp recovery to check for problems, everything is good.   Think the lens must be truned on.  All this is after a new fatory reset.  Yahoo Messenger is either not found. Thank you

  Hello

  Update

  I understand why internal webcam not found.   All I had to do was install cyberlink 1002 Hp drivers and reinstall the Applications.

  As I understand it there is only one two cyberlink reinstalls one is 3.5 and the other is 1002.

  Both on the same page 1002 is located about 15 lines under the first.

  Hello

  Update to this issue:

  I understood why the CYberlink Youcam found internal unit. All I had to do was install cyberlink 1002 Hp drivers and reinstall the Applications.

  There are two cyberlink reinstalls a 3.5 and the other 1002.

  Both on the same page 1002 is located about 15 lines under the first.