HP Officejet 6500 parameters changed suddenly

Similar Questions

• How to set the parameters of scanning on Officejet 6500 connected to a Mac?

  I'm trying to scan documents and pictures using the following:

  Scanner: HP Officejet 6500 E710n-z all-in-one
  Computer: Macbook Pro retina
  Operating system: OS X mount Lion
  Application: "HP Scan" (this application was provided by HP)

  Whenever I have analyze anything, it comes out in grayscale at 300 dpi resolution.  At least, this is what HP Scan tells me when I click on the "Info" button in the lower right.

  I would like to be able to scan things in color rather than just in grayscale, and I wish I could choose the resolutions other than 300PPI.  But I looked everywhere in the graphical interface of the HP scanning application, and I can't find anywhere to adjust these settings.

  Did anyone here know how to change these settings?

  Unfortunately, the link you provided is a version of the software much older than what I have currently installed.

  HP_Installer_Inkjet_Full_Group02_10.3.dmg was published on 14/09/2009, and it is intended for OS X 10.6, aka Snow Leopard.  When I installed the printer installation CD had software pretty much at this time, and he refused to install on MTN. Lion.  Instead it asked me to download the latest version from the HP website.  What is installed on my machine is a file named HP_Mountain_Lion_Ink_SW_v12.23.18.dmg.  Unfortunately, I neglected to save the URL I downloaded from, and I can't seem to find him.  But I saved a copy of the .dmg file in case I ever need to reinstall.

  Meanwhile, I managed to find the answers on my own.  Part of my problem is that, although I'm fairly familiar with Linux and Windows, I am new to the GUI of Mac and his metaphor interface and GUI desktop is different, enough of these I'm familiar with what my instincts are sometimes not a lot of help.  Then, it took me days to notice the only critical button that made all the selections, I was looking for visible.

  HP Scan DO allows you to set things like the Type of Scan (photo or Document), Mode (color, grayscale, black & white), resolution and a number of other parameters.  But we must first click on the "Scan" button... ", and then click on the widget of the arrow to the right of the selection of the Scanner.  By clicking on the arrow pointing downwards in fact all other settings appear.

  If you change the Type of Scan of photo of the Document, it automatically changes color in grayscale Mode, which does not want to create a color PDF.  But you can change the Mode back to color.  And you can save this document as a PDF searchable to call the I.R.I.S. OCR software on it.

  To create a multiple page PDF, or let the software analyzes all sheets in the document feeder, or place another page on the window and click on the button 'Add' in the lower left corner of the window, how it displays the same dialog box that is displayed when you click 'Scan '. ».  You can click on the arrow down and change the settings for each page or leave them alone and they will remain the same as the parameters of the previous page.

  When you have analysed all the pages that you want in a single document, click 'send '.  This displays the usual selection of files box.  At this point, if you set the 'Searchable PDF', or 'PDF' format a checkbox will appear marked "save all items in a single file.

  Thus, it seems that HP Scan works with MTN. Lion, it provides all the features that Capture of Image and seen I.R.I.S. integrated in it, it provides OCR features that Capture of Image is not.

• OfficeJet 6500 E710n-z: How can I change the printable area

  I use a printer OfficeJet 6500 E710n-z.  In the past, with Microsoft Office 2007 and Publisher 2002 on a Windows Vista operating system, I was able to print publications with a margin of page of 0.125 "around all sides.

  I recently bought a new laptop running Windows 8.1 (64-bit) and upgraded to Microsoft Office & Publisher 2013.  Now my printable area is (landscape)-left margin: 0,587 "for a total width of 9,827".  The top margin remains the same, to 0.125 "for a total height of 8.25".

  I don't think I made any changes to the printer settings.  How to restore the printable region so that it has a margin of 0.125 "around the page?

  Hello @RonJRu,

  Thank you for visiting the Forums from the HP Support! " I see that you want to change your margins toward 0,125", since you upgraded to 8.1 of Windows and Microsoft Office & 2013 the printable region Editor is (landscape) - left margin: 0,587 "for a total width of 9.827 and the top margin is correct.

  When you upgraded to Windows 8.1, you would update the software and drivers for the printer as well?

  I would like to first run you printing HP scanner doctor > www.hp.com/go/tools

  -It has been designed by HP users troubleshooting and problems characteristic needed to solve many common problems encountered with HP print and scan products related to Windows computers.

  Let me know what the PSDR find, I'll watch for your reply.

• HP Officejet 6500 E709n: HP Officejet 6500 E709n hangs with mac (Mavericks) when you try to save changes to scan destination

  HP Officejet 6500 E709n hangs with Mac (Mavericks) when you try to save changes to scan destination. That's all!

  What is the problem of HP?

  Hello

  What application you want to scan to?

  Try to install the HP Easy Scan software, it will be installed in the Applications folder:

  https://iTunes.Apple.com/us/app/HP-easy-scan/id967004861?MT=12

  You see a difference using?

• HP OfficeJet 6500 wireless do not print because there are 2 days, I changed my wireless router

  Original title: print printer print

  My HP OfficeJet 6500 Wireless will not print because 2 days ago, I changed my wireless router. The printer is no longer under warranty and I'm using Windows 7 OS. I have

  Assuming that there is a wireless connection to the printer, the most likely cause of the problem is that the printer is configured to obtain its IP address automatically, and the new router has assigned to the printer an IP address that is different from that which was initially awarded.

  To check if the above is the question:

  Controls on the front panel of the printer allows you to print a Network Setup page:
  From the home screen, press the right arrow, and then select Setup.
  Touch reports, click Network Configuration Page.

  Find the IP address of the printer on the Network Configuration page.

  On your computer, go to devices and printers

  • Right-click on your printer icon, and then select "printer properties".
  • Click the "Ports" tab
  • WITHOUT clicking anywhere in the list of ports other than the right scroll bar, find the line highlighted (the one with the box in the box)
  • Is the 'Port' the same as the IP address of the printer that you noted on the Network Configuration page?
  • Assuming that the port in the printer properties dialog box is not the same as that shown on the Network Configuration page, click the "Configure Port" button and enter the correct IP address in the box "printer name or IP address.
  • OK your way out

  To avoid this problem does not happen, read the User Guide for the your printer and configure the printer to use a static or fixed IP address.  Choose an address that is in the same subnet as the router but outside the range of addresses used by the DHCP server on the router.  You can find this information on the configuration of your router utility.

  For example, most Linksys/Cisco routers use the IP addresses of the form 192.168.1.x and allocate addresses in the range 192.168.1.100 to 192.168.1.150.  In this case, you should take a static IP as 192.168.1.20 (20 is outside the range of 100 to 150).

• OfficeJet 6500 E710n moved network how do I change IP port?

  Hi we moved offices and changed to the wired network and subnets. OfficeJet 6500 E710n can access via the web and the new installer print using windows generic driver. But how do the existing full blown devisce to change its IP address? The port options are grayed out in the properties. I installed the printer with the GVRD full blown on a new pc and it works even if errors in the search for the printer on the network and you must provide the address of the printer.

  How to change configuration on printers with complete pilot?

  Thank you very much

  DT

  Hi, DT,.

  Please follow the steps below to reconfigure your device on the new network:

  1. Enter in devices and printers, right-click the printer icon and select remove device.
  2. Right click on the background area of the window and select Device Manager.
  3. Find the category of imaging devices, it spending, then the HP Officejet 6500 a right-click and select uninstall. If there is no element not to skip this step.
  4. Restart your PC.
  5. Click Start > programs > HP > HP Officejet 6500 E710. Search for printer software installation & / add / connect a new printer. If there is any of these items click on the printer icon and follow the steps to connect a new printer.

  Shlomi

• My HP Officejet 6500 all-in-one wireless suddenly stopped to print black, even if I have a lot I have

  My HP Officejet 6500 all-in-in-one wireless suddenly stopped printing black, even if I have a lot of ink. It prints all other colors. When I try to check the ink levels it tells me that this printer is not available, try again later. I have a lot of ink. Have restarted printer and Mac Book Pro. Driver is up-to-date. Any thoughts?

  Reset the printer.  Turn the power off and then hold the # and 6 keys during and shortly after turning it on.

• My Officejet 6500 more suddenly stopped printing wirelessly from my iPad 2

  After working perfectly for several months, my 6500Plus HP E710n Officejet-z does not print wireless from my iPad2 or my iPhone 4 s. I use version 5.0.1 on these devices and had used this version before that the printing problem. I get the following message: "Officejet 6500 E710n-z [11E2A9] the printer is no longer available." The printer works fine (without thread) of my MacBook Pro in OS X 10.6.8 version. I "think" that there was an update from HP before it started, but I'm not sure of the timing. Any ideas on how I can get these mobile devices wireless print again?

  What router?  Reboot the router by pulling its plug momentarily.

  If this does not work, we will set an IP address of the printer:

  -Print a the front of the printer Network Setup Page. Note the IP address of the printer.
  -Enter the IP address in a browser to reveal the internal settings of the printer.
  -Choose the network tab, then wireless along the left side, then on the IPv4 tab.
  -On this screen, you want to set a manual IP address. You must assign an IP address outside the range that the router sets automatically (called the DHCP range). If you do not know the range, change the last set of numbers (those after the last '.') 250
  -Apply the subnet 255.255.255.0 (unless you know it's different, if so, use it)
  -Enter the IP of your router (on the Page of the Network Config) for the gateway.
  -Enter for the first DNS 8.8.8.8 and 8.8.4.4 for second DNS.
  -Click 'apply '.

  Now, stop the router and printer, start the router, wait, and then start printing.

  After that, you will have to redo 'Add printer' using the new IP address.

• Can customize us the parameters of sleep of Officejet 6500 709n

  We can customize the Officejet 6500 709n sleep settings, I found no option overall upward through which we can change the time after which the printer goes to sleep.

  Hi saveenergy2,

  No, energy save mode is set by default to this printer. The printer must wake up when you send a job to the printer. If this isn't the case, please let me know?

• OfficeJet 6500 began suddenly printing documents less than full size

  What setting I should do and how can I do?

  Thank you

  Hi hmcgee3,

  Welcome to the Forums of HP Support! I see your HP Officejet 6500 has begun printing documents less then enlarged.   I would be delighted to help you to save and print actual size but requires a bit more information:

  1. what program you print from?

  2. What is your current operating system, Windows or Mac and what version?

  3. How is the printer connected, USB or wireless?

  4. do you get an error message when you try to print?

  5. If you open wordpad or webpage you are able to get a full impression?

  If you have a Windows operating system later than XP, please start here: HP print and Scan Doctor- it was designed by HP to provide users with troubleshooting and problem-solving features needed to solve many common problems encountered with HP print and scan products related to Windows computers.

  Please let me know what the PSDR find, I'll watch for your reply.

  Thank you

• Impossible to change the language on officejet 6500

  Hi guys,.

  When installing officejet 6500 I followed all of the installation instructions, and since its launch in English I have no need of step 4 to set the language.

  Once the installation program completed officejet back on what, in my view, is Chinese. I tried the instructions given by HP but can't get any English at all.

  Their instructions say to press the set up button and then the right arrow button until the 'Preferences', the problem with this is as I scroll it is all in Chinese and I don't know which setting is "Preferences".

  I ended up trying each setting and continue with their instructions but get not English.

  Please help, I'm out!

  Lith01

  Try the following steps

  1. press the Setup button

  2. Press 7 from the numeric keypad and press the OK button

  3. Press 1 from the number pad to select English

  4. Press 1 to confirm the language

  5. Press 1 to select the USA as your country (if you are in the USA)

  6. Press 1 to confirm your location

  Let me know if this solves your problem

• OfficeJet 6500 printer ONLY print landscape

  Hi, I have an Officejet 6500 (E709n).  I also have Windows 7 64 bit.

  I did nothing yet suddenly the printer started printing in landscape, even though my settings call for the portrait.  It has a new pop of the print window. (First default window appears select print, then it coils, then jumps to the top of the final window which is the new.) The following image is what I'm talking about.  All my settings are correctly defined and yet it still prints as shown in the picture.

  Thanks in advance for any help!

  

  Hello MomToMVS
  
  After looking into your problem, a bit I found a thread on another forum with what appears to be exactly the same problem. Below I will include a link the the wire and instructions on what has been done to solve the problem. I would like to know if it works or not.
  Firefox default print landscape
  
  1. in the web in Firefox address bar type about: config and press ENTER. (it can warn you about changing settings here just click OK to continue)
  2. Locate the print.printer_NAME OF PRINTER.print_orientation (where the PRINTER NAME is the name of your printer) and right click on it and click Reset.
  3. conclusion of the tab, and try again (it may be a good idea to restart Firefox first).

• HP Officejet 6500 E709n Console lights flashing & is not printing

  HP Officejet 6500 E709n stopped working yesterday and almost all of the lights on the console keep flashing continuously.  I get a message on the display to turn off, then turn it on but it still does the same once I do this.

  I have sought and found how to use # and 3 keys for a partial resets when you plug back in the power supply, but after I did it is still the same as before?

  I unplugged the power supply and all the rest and sit all night and this morning it did the same thing.

  Is it possible to do a complete reset instead of a part of the console?

  Thank you

  Ken

  OK tried to edit the post previous to add to this, but has not see a button "Edit"?

  So I got the printer Open as when you change cartredges and noticed that the print heads has not moved at the Center as usual?  Tried moving the print head with my hand and he moved only about 1/4 "back and all of a sudden the print head moved to the center that he assumed?  Closed the top and crossed a calibration and then printed that and now it works again.  Go figure!

  I guess that's a mechanical and electrical/electronic problem rather than something.  I looked and didn't see anything wrong with gears and stuff on top so it can be one problem somewhere else.

  Ennywho, I will continue to use it like that too long it will work.

  Thank you

• OfficeJet 6500 Wireless: Lost after upgrade Windows 10 Scan function

  During the upgrade to Windows 7 to 10, I received a message that the printer drivers may not be installed correctly.  I uninstalled and reinstalled the full features of HP software for my wireless Officejet 6500 several times.  No apparent problem until I tried to scan a document.  I get the following error message "cannot scan because another program or computer uses the network of imaging device.  Try again later. "Error information 8, ((0, 18, - 2147467259)) thinking Windows FAX and Scan can be the other program, I disabled it. no change.  HP Print and Scan doctor gives me the same message, "the scan cannot because another program or computer using the networked imaging device.  Try again later. »

  All the features worked before the upgrade to Windows 7 to 10.  There is no other computer the device.  The printer will scan using Windows FAX and Scan, but the HP scanning features are much better in my case.

  Do not remove anything else then the folders I mentioned.

• HP Officejet 6500 a more impossible to connect to the server

  My HP Officejet 6500 a more printer was connected to my wireless network and was attached to the ePrint service; and I had an email address to send prints to my printer. But today, when I go to the ePrint, it shows that my printer is NOT connected to the SERVER!

  He invites me to go to the Setup menu option / Services Web Setup / email address Panel on the printer display. And, when I do that, it shows me: "you can connect the printer to the itenrnet through a proxy server and touch the ENTER PROXY button! I do not know what Proxy Server, he is asked? And when I get soemthing, it then asks a PORT number! Still, I don't know what is the Port! My printer is still connected to my home wireless network.

  Then I went back to HP ePrintCenter page and REMOVED my printer and then tried to ADD a printer, but, now, he asks me to "enter the printing Code.

  When I tried to enter the print code I had on the file, it says that the code was not valid; the codes are ONLY good for 24 hours, and I have to get a new printing code to return to the configuration of the printer menu steps described above!

  Looks like I'm stuck in a vicious circle.

  I would appreciate your help. Thank you.

  To correct the unable to connect to a web server error. I'd start by power cycling the router and the printer. If still we get the error that I will then try to put a static DNS server built-in web printer (EWS).

  To power cycle the router:

  1. unplug the router (most do not have a power button) and then put
  the printer off using the power button
  2. wait 30 seconds
  3 plug in the router, wait until it is completely upward and the operation.
  4 turn on printer
  5. after the printer is completely top and operational reattempt to connect to web services

  If after that, you still get the error message, I had put the static DNS. To do this:
  1 get the IP address of the printer, and then make a browser (IE, Chrome, any browser you want) and enter
  IP address of the printer in the address bar. This will bring up the SEWS
  2. search for the network titled tab and click on it
  3. then click on IPv4 in the left column, wired / wireless depend on the connection, if connected by Ethernet
  Choose wired, wireless select wireless
  4. when loading this page watch the second part entitled 'Configuration of the DNS addresses' change this radio
  Manual button and change the DNS preferred manual to 8.8.8.8 and manual to auxiliary DNS
  8.8.4.4 and then click on apply.
  5. pay particular attention the following screen which appears this message usually is a way to undo changes only
  made by clicking on the OK"" button. Avoid this by clicking another tab
  or just leave it until you close it.
  6 turn the printer of the cycle and then turn it back on
  7. once the printer is back on and retry operation, activate web
  services and reprint information page so that you can get a new code and add your printer back to ePrint Center. You will need to create a new e-mail address for the printer.