web control problem compact fieldpoint

Similar Questions

• Compact fieldpoint helps!

  Hi, im currently using compact fieldpoint cFP-2120 with modules cFP-AIO-610 (X 3) cFP-TC-120, cFP-RLY-425, cFP-DIO-550. The question I have is im using cFP-AIO-610 to measure the voltage. The question that I saw that I can for example measure 3 Volts on channel 1, then I connect on channel 2 (not during the connection to channel 1). And it will not read 3 volts it gives less than a tenth of this value and the current increases value if I try to increase the voltage. Ive checked my connections on the connector of the CFP, MAX and everything seems ok. Is the broken module? It could be filled? Ive even changed the module to another and same problem. What it could be?

  Stu

  This issue is currently addressed through technical Support UK.

• HP Officejet Pro 6830 E3E02A: HP Officejet Pro 6830 scan via web control panel

  Hello, I just bought the printer, and I tried to configure the analysis via the web control panel.

  When I tried to scan, I got the message:

  "You can't use this feature because it has been disabled. For more information, contact your network administrator or the person who set up the printer. »

  Given that I'm the one who created the printer and I am the network administrator in my house, there is not one that I can talk to

  I tried to find permissions in the printer itself, but I couldn't find anything.

  Can you help me configure the scanning to any computer that connects to the control panel (only designed connected to the wifi can do anyway is safe)

  Thanks, Lidor

  Hello

  Please specify what you are looking for to WebScan.

  Here is the procedure to activate Webscan (you are almost there to implement!),

  First, we assume that your printer is installed over the network (whether via a wireless or Ethernet connection)

  1. Go to your printer and to determine the IP address of the printer for example 15.37.213.128
  2. The priner key IP address in your Internet Explorer browser
  3. Go to sweep, there should be an option Webscan. If it says "you cannot use this function...". ", you will need to enable it.
  4. Activation of the Webscan: Click on 'Settings' > 'Security' > 'Administrator settings' (simply 'continue' if there are any warnings about certificates, you may need to click on "Advanced" to continue)
  5. Under 'Settings administrator', it should be a "Webscan' option, be sure to what is"checked"and"Apply"or"Save"your settings.
  6. Go back to perform a scan and you should be able to see the Scan options. Select "Document Source" to be "ADF", PDF "Type of Document' and 'start scanning '! (You can also select "Document Source" to be "JPEG")
  7. Once scanning is complete, right-click and save your file in the destination of your choice.

  Here is a relevant video showing how Webscan is done, you are right in saying Webscan can be used in any OS, the video example uses Chrome for example:

  Scanning from Chromebook

  https://goo.GL/fH4F1R

  Hope that helps.

  Please click the "accept as solution" if it helped to solve your problem and "Bravo Thumbs up" as an encouragement.

• Web cam problem, using Skype... I can see other people, but they cannot see me...

  original title: web cam problem

  using Skype... I can see other people, but they cannot see me...

  Hello

  Be sure to contact the Skype Support like this might be a known issue and they might have the solution.
  There is also information and on the Skype Forums.

  Skype - Support
  https://support.Skype.com/en-us/

  Skype - Forums
  http://Forum.Skype.com/

  Also check with the manufacturer of the system, their drivers and documentation support online and ask
  their forums (if any).

  ============

  You will probably need to reload the drivers of the device and any camera control software.

  Login as an administrator.

  Double-click Control Panel / Device Manager - Imaging - writing down of the brand and model of camera.
  on this subject and on the tab of the driver is version. Now, click on update drivers (who are unable to do anything as MS
  is far behind the pilots of certification). RIGHT click on the camera - UNINSTALL - REBOOT - it
  will update the driver stack.

  Now, go to the system manufacturer's website and download the latest driver for the camera and the other related camera
  software (if not more recent get the same).

  Download - SAVE - go to them and RIGHT CLICK - RUN AS ADMIN - reboot after each driver.

  Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
  http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

  How to install a device driver in Vista Device Manager
  http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

  Then let windows updates on however prevent loading of drivers who are often older than the
  those that you have installed. If updates suggests a pilot and then HIDE it and watch manually to see if their
  really is a more recent version (at the time system manufacturer and the sites of the manufacturer of the device).

  How to disable automatic driver Installation in Windows Vista - drivers
  http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
  http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

  I hope this helps.

  Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle="" -="" mark="" twain="" said="" it="">

• After the upgrade to Firefox 5, I get a message: "Firefox is currently in offline mode and cannot browse the Web." IE 9 connects to the web without problem. Suggestions?

  This began immediately to FF5.0 installation after the upgrade to FF3.6.18. I uninstalled and reinstalled both 3.6.18 FF and FF 5.0: the old version connects to the web without problem, but FF5.0 never does. IE9 is able to connect properly.
  Thinking that my firewall software (McAfee) might get in the way of FF5.0, I uninstalled, but remained the connection problem.

  Check this setting:

  • File > [] work offline

• LabView is in real-time for Compact FieldPoint necessary?

  Hello!

  LabView is in real-time for Compact FieldPoint (CFP) necessary?

  (in German: Ist für die von Compact FieldPoint LabView time use real necessary?)

  Thank you.

  Bye, Ouafa

  Hello

  If you just want to use Labview for logging and graphics (via Ethernet) AND that you do NOT use a CFP-real-time controller, you don't need to LabVIEW Real-time.

  For example if you use OR cFP-1804-Ethernet/Serial Interface for Compact FieldPoint.

  (http://sine.ni.com/nips/cds/view/p/lang/en/nid/202527)

  If you are using a controller real time you WILL LabVIEW Real-time.

  You can't function without it!

  Best regards

  Mencef

• Unable to connect: Remote Desktop control problem

  Original title: remote desktop control problem

  Hello, I am based in Bulgaria and I am trying to connect to the computer of a friend who is in the United Kingdom. He provide me with all the PC name, user name, and password information. I've tried almost everything I find in your site and the forum but still cannot connect and he can't understand where is the problem. I'll be more than happy if you could help me with this Russia.

  Kind regards

  Ivan Karchev

  Hello

  I suggest you to post your query on our Forums TechNet social as this question should be better there.

  Please refer to the reference to the link below to send your request:

  https://social.technet.Microsoft.com/forums/Windows/en-us/home?Forum=w7itpronetworking

  Hope this information helps.

• Microsoft support "Sign In" on the Canadian Web site problems

  Hi, I'm of the Canada.

  I tried to sign in Support of Microsoft, specifically at this address:

  http://support.Microsoft.com/?ln=en-CA

  When I'm in 'http://support.microsoft.com/?ln=en-ca' in the upper right corner of the screen, it is said: 'change of Canada. " Which I guess means that I am on the Canadian Web site, since I live in the Canada.

  I click on Contact a technician of technical support by email, online or by phone

  then I click on Windows Vista Home Premium 64 - bit Edition

  Then I get this message "type the product identification number."

  I found the identification number of the product in the menu 'Start', click 'Control panel' and click on 'system '. I also noticed that it contains some basic information about my computer. As it is Windows "Windows Vista Home Premium" edition. "Service Pack 1". "System type: 64-bit operating system. And my "Product ID: ' 12345-XXX-1234567-12345.

  I enter my code of 23 characters in the field, I make sure that letters are uppercase and click on the continue"" button.

  That the of when I always get this message "there was a problem with the product ID. Please re - enter the ID of the product in the correct format. You can also get support by paying with a credit card. »

  I tried to enter my "product identification number" to the address of the US site as follows: "https://support.microsoft.com/oas/default.aspx?&c1=509&gprid=11920&&st=1&wfxredirect=1" I guess that's the American site because it says in the upper right of the screen: "United States (English). I get the same message: "there was a problem with the product ID. Please re - enter the ID of the product in the correct format. You can also get support by paying with a credit card. »

  I wonder if I need to cookies, or something on my computer to enter the Web of Support Microsoft Canada (English) site? http://support.Microsoft.com/?ln=en-CA

  If your computer is pre-installed with Vista (Dell, HP, etc.), you are not FREE Microsoft Support.

  All support is the manufacturer of your computer.

  But if you have problems, please ask in the Forums.

  http://social.answers.Microsoft.com/forums/en-us/category/windowsvista/

  Link above has a list of the Vista Forums for specific questions.

  See you soon.

  Mick Murphy - Microsoft partner

• Silverlight / Web site problems?

  I upgraded to OME 2.1.0.265 and have updated my Silverlight (v5), but it seems that Silverlight gives me a horrible time.  When you add a range with WSMAN to add a new range of discovery, I can't use the Finish button

  I tried the Web page in several browsers, Chrome/Firefox.  I tried IE8 and IE11 as well.

  If I just add a range to and use SNMP it will add.  But as soon as I use WS - MAN the Finish button depresses but does not remove the configuration screen, therefore, the beach is never added.  I must just add SNMP and finishing and the go back and change the configuration.  I still see an error on the page in Internet Explorer.  I have to click on the top right X to exit the screen.

  Anyone experience this problem?

  (Error on page pasted below)

  Webpage error details

  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Windows NT 6.1; WOW64; Trident/4.0; SLCC2; .NET CLR 2.0.50727; .NET CLR 3.5.30729 .NET CLR 3.0.30729; NET4.0C;. NET4.0E)
  Timestamp: Thursday, December 10, 2015 19:35:07 UTC

  Message: Error unhandled in a Silverlight Application [Arg_NullReferenceException]
  Arguments:
  Debugging resource strings are not available. Often the key and arguments provide enough information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.41105.00&File=mscorlib.dll&Key=Arg_NullReferenceException in SmartConsole.Wizard.Discovery.DiscoveryWizard.PersistData)
  at SmartConsole.Wizard.WizardFooter.OKButton_Click (Object sender, RoutedEventArgs e)
  at System.Windows.Controls.Primitives.ButtonBase.OnClick)
  at System.Windows.Controls.Button.OnClick)
  to System.Windows.Controls.Primitives.ButtonBase.OnMouseLeftButtonUp (MouseButtonEventArgs e)
  at System.Windows.Controls.Control.OnMouseLeftButtonUp (control ctrl, ByVal e As EventArgs)
  to the millisecond. Internal.JoltHelper.FireEvent (IntPtr unmanagedObj, IntPtr unmanagedObjArgs, Int32 argsTypeIndex, Int32 actualArgsTypeIndex, string eventName, UInt32 flags)
  Line: 1
  Char: 1
  Code: 0
  URI: https://wma-dell-admin.nbcorp.newsbank.com:2607/Web/Default.aspx

  Message: Error unhandled in a Silverlight Application [Arg_NullReferenceException]
  Arguments:
  Debugging resource strings are not available. Often the key and arguments provide enough information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.41105.00&File=mscorlib.dll&Key=Arg_NullReferenceException in SmartConsole.Wizard.Discovery.DiscoveryWizard.PersistData)
  at SmartConsole.Wizard.WizardFooter.OKButton_Click (Object sender, RoutedEventArgs e)
  at System.Windows.Controls.Primitives.ButtonBase.OnClick)
  at System.Windows.Controls.Button.OnClick)
  to System.Windows.Controls.Primitives.ButtonBase.OnMouseLeftButtonUp (MouseButtonEventArgs e)
  at System.Windows.Controls.Control.OnMouseLeftButtonUp (control ctrl, ByVal e As EventArgs)
  to the millisecond. Internal.JoltHelper.FireEvent (IntPtr unmanagedObj, IntPtr unmanagedObjArgs, Int32 argsTypeIndex, Int32 actualArgsTypeIndex, string eventName, UInt32 flags)
  Line: 1
  Char: 1
  Code: 0
  URI: https://wma-dell-admin.nbcorp.newsbank.com:2607/Web/Default.aspx

  Message: Error unhandled in a Silverlight Application [Arg_NullReferenceException]
  Arguments:
  Debugging resource strings are not available. Often the key and arguments provide enough information to diagnose the problem. See http://go.microsoft.com/fwlink/?linkid=106663&Version=5.1.41105.00&File=mscorlib.dll&Key=Arg_NullReferenceException in SmartConsole.Wizard.Discovery.DiscoveryWizard.PersistData)
  at SmartConsole.Wizard.WizardFooter.OKButton_Click (Object sender, RoutedEventArgs e)
  at System.Windows.Controls.Primitives.ButtonBase.OnClick)
  at System.Windows.Controls.Button.OnClick)
  to System.Windows.Controls.Primitives.ButtonBase.OnMouseLeftButtonUp (MouseButtonEventArgs e)
  at System.Windows.Controls.Control.OnMouseLeftButtonUp (control ctrl, ByVal e As EventArgs)
  to the millisecond. Internal.JoltHelper.FireEvent (IntPtr unmanagedObj, IntPtr unmanagedObjArgs, Int32 argsTypeIndex, Int32 actualArgsTypeIndex, string eventName, UInt32 flags)
  Line: 1
  Char: 1
  Code: 0
  URI: https://wma-dell-admin.nbcorp.newsbank.com:2607/Web/Default.aspx

  Hi PCSEMA,

  Thanks for the details in your message.

  I will propose to check one thing here:

  -Go to settings-> discovery settings and check what "Assistant Configuration of discovery" is selected. It's "Assistant Standard"?

  If so, can you try to "Guided Wizard" and the addition of the new range of discovery works with guided Assistant?

  Thank you
  Vijay

• Web Service problem

  With the help of OWB 11.2 on a Windows 2007 x 64 Server gives the following configuration:
  
  -Instance of DWREPOSITORY database with owbrep.owbrep workspace used to design repository
  -DWDEVELOPMENT database with owbrtrep.owbrtrep instance of the workspace is the instance of development where the mappings are deployed and executed (owbrtrep is repository only)
  
  In the repository of the design, we have a "DEV" configuration that points to the control centre of the OWBRTREP on the development instance.
  
  We have created a mapping model, tested and then published as a Web Service on the standalone OC4J instance that comes with OWB (default agent). No problem, the web service runs ok from the test interface.
  
  And then we put in a process flow and deployed and tested templaye mapping. The flow of the process of publishing a web service also seems to work fine, but when trying to run using the test interface it throws the following exception (in the OC4J console):
  
  "10/05/25 12:43:28 java.sql.SQLException: ORA-20008: the workspace with the name: OWBREP and the owner: OWBREP does not exist." You can find the info to existing workspace
  rmation of the ALL_IV_WORKSPACE view or view WORKSPACE_ASSIGNMENT.
  ORA-06512: at "OWBSYS. WB_WORKSPACE_MANAGEMENT', line of 1594
  ORA-06512: at "OWBSYS. WB_WORKSPACE_MANAGEMENT', line 1561
  ORA-06512: at "OWBSYS. WB_RT_SCRIPT_UTIL', line 1028
  "ORA-06512: at line 1.
  
  We are doing something wrong here? It seems that the web service expects to find the workspace name and the owner of the DEFAULT_CONTROL_CENTER (OWBREP), not the development instance where the flow of the process is actually deployed (OWBRTREP). Any ideas how we can get this to work? Is there an option somewhere to set the workspace information?
  
  Any help would be appreciated,
  Roald

  Hi, guys

  For now, it is assumed the process flow is on the same instance. You can file a bug and we can improve in future versions.

  The workaround is now: there is a global web service AgentWebService, which has already been deployed, you can access it through http://:/jrt/webservice, there is a method called runCCJob, with this method, you can provide the information of workspace, but it must also allow you to select more information. You can get help from http://:/jrt.

  Published by: shawn wu on June 22, 2010 19:54

  Published by: shawn wu on June 23, 2010 05:32

• Slippage of Web site problem

  Hello

  We use EasyDNNsolutions Rotator for DotNetNuke. When the ratotor is horizontal sliding, the image on the right has half hight. After some time the image "plopp" at normal height. Works fine in the other browsers. Page Microsoft (XBOX.com) has the same problem. I found a solution. When it is set a border color of background oder so that works. EasyDNNsolutions Support says they can't can't recreate this question and think it's a Firefox Bug.

  MFG
  Andreas
  Cortado AG

  Sorry, but this forum is for end-user support Firefox no problems of web developer.

  Please see - where to go for support the developers

• To enter a Web site problems

  I often visit this website using Google Chrome. However, as soon as I passed the Mozilla Firefox browser, I can no longer visit this Web site. Here's the scene; When I go on this Web site, blank page appears, with a line of upcoming words < < you have an error in your syntax SQL; consult the manual for your version of the MySQL server for the right syntax to use near 'AND 'prohibited' = 0 LIMIT 1' at line 1 > >. I think that the problem can be solved easily, but I don't know where to start. I also checked around setting the menus so many times, and I have found nothing about the problem. Thanks to pay attention to my problem.

  Import you all the data Google chrome in Firefox?

  Clear the cache and cookies only from Web sites that are causing problems.

  "Clear the Cache":

  • Firefox/tools > Options > advanced > network > content caching Web: 'clear now '.

  'Delete Cookies' sites causing problems:

  • Firefox/tools > Options > privacy > "Use the custom settings for history" > Cookies: "show the Cookies".

• Portege M800-PPM81E - installation of remote control problem

  Hello guys,.

  I have a problem to install the remote on this laptop.
  First the winbond CIR driver does not work, I try on different OS... the same message... "There is a problem with this Windows package install."

  A program run as part of the Setup did not finish as expected. Contact your supplier of staff or the package of support ".
  I've now installed Vista x 64... doesn't work.

  Thank you
  M.G.

  Hello

  Remove the old software on the remote control of the system.
  Then, visit the page of European driver of Toshiba and download the drivers and tools.

  On the Toshiba page I found the Remote Control Manager v.2.4.0.1. This driver is required for the remote control work.

• remote control problems

  I'm trying to control a presentation Keynote on my Macbook Air to 2015 with an iphone 2015 6s.  Both devices have updated to OS and Keynote software.  Keynote on the Macbook is set to "enable remote" and he found the iphone.  But the iphone can't find the Macbook.  He just continues "looking for Macbook.  Both devices use the same residential Wi - Fi network.  Any suggestions on where to look the problem?

  It's the definitive method for the configuration and use of Keynote Remote: Keynote Remote using

• Qosmio F20-130: (infrared) remote control problem

  Hi guys,.

  got a little problem which I think I've seen on this forum before. My remote no longer works. Used to work properly. Now, with the laptop turned off and connected remotely, I can light up the lap top. However, it does nothing else. If I press a button, the red light on the remote flashes and the Red led on the receiver will Flash but nothing seems to happen.

  I checked in device manager and I have tried using another USB cable to connect the infra-red receiver. Any ideas on what could be the problem? There is no secret key which I pressed by accident is there which disables the remote control?

  Dave

  Hello

  I put t know if it helps but try to remove this command remotely in the Device Manager and unplugged the unit. After the new trial to restart to connect the remote control again.
  In addition, please check the batteries. I know the flesh of lights but nevertheless check.