Web publishing tool to log off button unclickable/Greyed

Similar Questions

• Web publishing tool does not display my program on other computers

  Hello

  I want to ask about three points in this post:

  -J' using Web publishing tool to publish my program on a Web site. The server of LabVIEW works very well and the site is posted online and it works fine; However, when I check the website of the host the program displays fine and t works perfectly, but when I check the site in any other computer program does not at all. I thought that maybe I didn't have the good plug in the other computer, so I downloaded it and it still wouldn't work. I tried this on 3 different computers and the program would not load on the Web site. Any ideas?

  -Also, I noticed that in order for me to open the Web site that I must write the url complete (http://sprites.fit.edu/index.html), the server of labview will go automatically to page index by typing just "sprites.fit.edu" is there something I can do?

  -Given that this program is for a research project, the Web page where the program only can be reached and used by some people. I tried to use PHP to create a login page, but LabVIEW server does not support. Is there a way I could address the issue of security for this program without denying control of it?

  Thank you for your help.

  Thank you, Larissa

  It's good to know you've got control of the program because it's a question that I need to fix.

  I found that the problem of activation of the vi on the server. That's why you have seen. About two hours ago, I could see the program in another windows. Thank you.

  You know a way to allow some user control?

• Error when trying to publish Panel to the web using Web publishing tools.

  

  

  As you can see in the photo.

  I want to now pubsihing my program on the web. So I using web publishing tools to create.

  But when he wants to download the panel, it cannot run, after that, the web out "VI required is not loaded in memory on the server".

  This sentence, 'Required VI is not loaded in memory on the server,' which way?

  Thank you for your help.

  Did you have a look at the following article:

  Asked that VI is not loaded in memory on the server computer

  A VI is deemed be in memory whenever the program is available on the server machine. The VI doesn't have to be running.

  If the article link above does not help, I would like to know what LabVIEW system you run on your system, and how many connections have what install you on the server. The LabVIEW basic and full development systems include a remote front panel license that allows a client connection. The LabVIEW Professional development system includes a remote façade license that allows five customer connections. I was wondering if that might cause problems.

• The web publishing tool to send data to an external web server?

  We have a customer who wants to be able to see the LabView to test the results of their office. At our office is located behind a firewall and, therefore, to allow access to the web server or something else would have open access to the outside world and I don't want to do that. Can the web server web publishing LV tool publishes to be external to the Organization? For example, you will need to use FTP credentials to access the external web server? Any information would be greatly appreciated.

  Hello

  I don't see a way to do it with remote façade panels. However, you can take a snapshot of your façade periodically and save it to the FTP server. In this way, the results of the tests are available on the FTP site.

  To save a snapshot of the façade, you use the VI reference (functions > programming > Appilcation control > reference VI Server), invoke the node (functions > programming > Application Control > node call) and the VI 'Write the JPEG' (functions > programming > graphics & Sound > graphic Format > write the JPEG file). VI reference to the reference of the thread invoke node entry, choose the front > get the Image method, and then wire the data output of the Image to write JPEG file VI to save it as a JPEG file on the FTP server.

  I hope this helps.

• Remove Windows 7 Log Off button

  Hello. How can I remove the logout button in the Menu start Windows 7 Professional? I already disabled Shutdown, lock and SwitchUser, but for some reason, I can't remove the Logoff button.

  I have already tried using gpedit and regedit, but somehow, it's still there and I can still click on it.

  Another way I have not yet tried?

  Hi C,

  Don't know what you have tried in the registry, but here is the solution. You can simply run the compiled registry change or make the changes manually. Here's how:

  Delete in the registry:

  1. download the file edit registry at the following address:removestartmenulogoff

  2. double-click on the registry file, and then click Yes to the confirmation message.

  3. restart your machine to see the change.

  Or, if you prefer that this can be done manually:

  1. Type "regedit" in Start menu, right click and choose "Run as Administrator".

  2. navigate to the following key:

  HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Explorer

  3. in the right pane, create a new DWORD value namedStartMenuLogOff and set the value to '1 '.

  4. close the registry

  5 restart the machine

  Reference:

  http://www.intowindows.com/how-to-removedisable-log-off-entry-on-Windows-7-start-menu/

  * Note: Also the walk through this link register also provides an additional option to remove log off via Group Policy.

  (If this post wasHelpful ("useful Vote") or response ("brand that answer") your question, please click on the corresponding button to help others find the answer more quickly.) Besides, if you feel that someone else has been useful, mark them too. Also, if you have any othercomments please let us know.)

  Hope this helps,

  Steve <> Microsoft Partner

• How can I activate LabVIEW web publishing by program tool.

  Dear Experts,

  I'm new with LabVIEW web Publishing; I'm using LabVIEW 8.6 Versions. Anyone help how can I activate the LabVIEW web publishing tool progremmatically.

  I know how to turn the web publishing tool in manually.

  Thanks in advance.

  Your question is not clear at all. What exactly do you do? Also, what have you tried so far?

• How can I get my action button can be log off and not closed? I select it in the customization tab, hit apply and then ok, but nothing changes.

  How can I get my action button can be log off and not closed?  I select it in the customization tab, hit apply and then ok, but nothing changes.

  Hi Erin,.

  Please check if you have followed the steps below to change the action of the Power button.

  By default, clicking on close button in the start menu stop your computer. You can change this so that instead of close, your computer logs you off, crashes, restarts, goes into a State of sleep or goes into hibernation.

  1. open properties of the Start Menu by clicking theStart button, clickingControl Panel,appearance and personalization, then clicking on thetaskbar and Start Menuand the taskbar.

  2. click on theStart Menu tab.

  3. in the list ofthe power button , click an item, and then clickOK.

  When you change the action of the closure of the key, the button name changes to reflect the new action.

  If the steps above do not change the option, you can try creating a new user account on your computer and check to see if it helps you change.

  To create a new user account.

  1. open user accounts by clicking the Start button, clickControl Panel, click user accounts and family safety (or by clicking onuser accounts, if you are connected to a network domain), and then clickinguser accounts.

  2. click on Manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. click on create a new account.

  4 type the name that you want to assign to the user account, click an account type, and then clickcreate an account.

  If you are able to change the action of the power button by using the new profile, access the link below and follow the steps to correct the user's profile.
  http://Windows.Microsoft.com/en-us/Windows7/fix-a-corrupted-user-profile

  I hope this helps. Let us know the results.

  Thank you and best regards,

  Srinivas R Microsoft support.

  Visit ourMicrosoft answers feedback Forum and let us know what you think.

• When a user logs off Windows 7 x 64 session, the rest can not access the internet until the restart network card

  Hello! I found a problem with my system: when a user logs off Windows 7 x 64 session, the rest can not access the internet, until restarted network card. Reinstall NIC driver did not help. Problem appears on a built-in adapter, in the motherboard and a separate PCI card too.  Same router via its web interface is not accessible. Windows cannot automatically fix this problem after trying to diagnose a problem with his problem Diagnostic tool. After the diagnosis in the DETAILS window, MORE tests, it displays a message like this "computer remote can not receive a connection via the Internet (HTTP) Service Port". "Unplugging" a corresponding Local network connection and then reconnect solves the problem immediately. Switching between users, when two of them are connected do not cause this problem. Important: the problem occurs in the account of the user who was logged on the system FIRST after the PC was on, when the user disconnected on newspapers of a SECOND. If the SECOND user is logged in and the FIRST user disconnects, SECOND can still access the internet. It depends only on the sequence of the user's record, not on the particular user name. And one more interesting fact: after each user registered on and outside just for once, the problem seems to disappear until the PC is turned off and turn it back on!

  System details:

  Motherboard: ASUS P8Z77-VLK
  CPU: Intel Core i7 3770 K
  RAM: 8 GB
  OS: Windows 7 x 64

  Hi, Mahesh,

  and thank you very much for your help! Update firmware driver and router LAN did not help me get rid of my problem, but greatly improved my experience of networking in general. Anti-virus software was not guilty, also, but! I found the "iControl" network software, installed as part of Sogiciel 'AI Suite II' (that came on the CD of motherboard ASUS driverssoftware), runnning and causing not only the problem mentioned above, but would also decrease upload speed up to 0.3 MB/s, when download passes to nearly 100 Mbps! Moreover, searching the Internet, I have found a lot of complaints about the behavior of this software, so that people watch you the occasional installation of this piece... sweet ;) As "iControl network" has been uninstalled (not only turned off in the settings of 'Ai Suite II'!), I'm totally happy with my system performance.

  Best regards
  Greg

• Computer freezes on logging off the screen.

  Our computer required a restart of the system, we have followed all the instructions (computer restored last time it updated) & was able to connect and find our computer in a normal state.

  Then told us to restart. The computer is now frozen on the screen "logging off". What does that mean?
  original title: frozen on the screen "logout".
  Hello
  1. why the ' computer required a reboot of the system?
  2 have you made any changes to the computer before the show?
  3. you are working on a domain environment?
   
  Method 1:
  If you have external devices attached to the computer, I you recommend trying to disconnect and then try to shut down the computer.
  Method 2:
  Step 1:
  You can try to use the power button to turn off the computer and then try to start at startup and check if the problem persists:
  Some options, including the mode safe mode, start Windows in a limited State, where only the essential is started. If a problem doesn't reappear when you start in safe mode, you can eliminate the default settings and basic device drivers and services as a possible cause.
  Follow this link provided below to start your computer in safe mode.
  Startup options (including safe mode)
  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode
  Step 2:
  If it works fine in safe mode, and then perform a clean boot.
  To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135

  Note: once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.
  Method 3:
  You can update the drivers and application software by visiting the manufacturer's Web site.
  Update drivers: recommended links
  http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links
  I hope this helps!

• I can't open the web development tools

  I can't open the web developer tools tab in the firefox menu and the text is bold

  This happens with all the tools in this menu?

  Start Firefox in Safe Mode to check if one of the extensions (Firefox/Firefox/tools > Modules > Extensions) or if hardware acceleration is the cause of the problem (switch to the DEFAULT theme: Firefox/Firefox/tools > Modules > appearance).

  • Do NOT click on the reset button on the startup window Mode safe or make changes.
  • https://support.Mozilla.org/KB/safe+mode
  • https://support.Mozilla.org/KB/troubleshooting+extensions+and+themes

• Close, do NOT restart, Firefox, WITHOUT reboot (or log off) Windows.

  I want to stop, NOT reboot, all open Firefox windows and tabs, WITHOUT reboot (or log off) Windows. That's all. Thank you.

  Have you tried one of them:

  • the orange button Firefox > output
  • File menu > exit

  If Firefox does not correctly close, he may be suspended during the cleaning process. This article has a few suggestions for this: Firefox crashes or does not - how to fix.

• Windows Vista - stuck on logging off the screen

  I have this same problem with Vista Home Premium that others have had.  When I tried to shut down the computer laptop last night, he is stuck at logging off-page - with the active circle always renewable.  After 20 minutes or so I was tired so close by using the power button.  This morning when I turned on the laptop, he went to the same page of disconnection. 3 hours later, it's still there!  My technical knowledge is, to say the least, "limited."  I tried to open safe restart mode and pressing F8, as suggested on other threads, but which didn't work - I can not go beyond the logging off the screen. How can I solve this?

  I had the same problem... This method works.

  Turn on the computer and when the screen shows recovery Windows press the space key.

  You will be presented with 2 options - either to continue with system resume or to remove the Hibernation file and start with primer system - choose the second option - you're fixed!

• Vista Home Premium: Startup time and office flaws often requiring the log off / log on to Correct

  At all to being able to help solve these problems successfully:

  When I bought my office, it came preloaded with Win XP (a FANATASTIC/s o!) with an installation disc free for Vista Home Premium. I have installed Vista until recently due to support XP being more available.

  Problems currently on a regular basis (every reboot) are:

  (1) long startup (sometimes nearly 10 minutes)

  (2) the "Blacktop" (AERO) Vista appears generally "gray" (like Win Classic) but with VERY little
  Services (icons missing, unable to run diagnostic programs, etc.).

  In this situation, I usually 'Log Off' and 'Connect' again and it fixes the problem-"bitumen".
  is back with the functions of the al. Despite this, I'll restart desktop using Services.msc. for all the functions

  are available.

  System information:

  (A) AMD 64 Athlon 3500 + (2.20 GHz)
  (B) 3.00 GB RAM
  (C) Vista 32 Bit (SP1 and SP2 installed (all updates current)
  (D) ATI Radeon XPress 200 Series (current driver)
  (E) all drivers are current (no changes required)
  (F) update BIOS (not not required)

  Note:

  (1) I am the user ONLY if the 'Default' options are regularly 'Log In' (as admin) - no guest accounts, etc.

  (2) I reduced some Desktop effects, which are not necessary (Menu Fade in and out, etc.) according to

  instructions of MSFT community on how to do this and what is safe to disable. This helped a little
  and I don't miss these features.

  (2) I deleted the "Windows.old" folder (as there was nothing to add to the Vista o/s).

  (3) I have NOT deleted the Partition which was part of the Win XP System Restore feature as)
  "I don't know if I should as well as to think that I should keep this system offline and running XP).

  (4) I use a security program that securely wipes deleted data, cache password, etc..
  Under Win XP, there was the possibility of "Protect Restore Points" (not required for Vista).
  I do NOT use the option "delete shadow copies".

  My questions are:

  (A) what is the cause of the boot extended both office and how to tackle it successfully?

  (B) what is the problem with the desktop computer? I don't mind the Log in and out a lot but would like to get rid
  me of this disadvantage.  I would like TO have the Vista boot WITHOUT having to Log in and out to

  ensure that the AERO desktop is available and functional.

  (C) should I delete the files and restore Partition in Win XP? Is this the cause may be a conflict with
  Vista? Also, please let know us if you think it would be better to keep these files available if no
  conflicts are possible or probable.

  (D) what is the path, the file name or folder (path if necessary) which governs the entire desktop
  (startup, appearance, services, etc.). so I can enter my security software to exclude it from
  be affected?

  Thank you in advance for any help you can offer.

  Incidentally - for all owners of Scanner Epson 1200U running Vista Service Pack 2:

  YES! Successfully, you CAN install and run this scanner on Vista with the EPSON Twain 5.53 driver without twisting your registry, etc.

  Steps to follow:

  (1) download the file of v5.53 (10245.exe) driver TWAIN Epson

  2) extract to the folder (default location or a location of choice) and open the folder

  (3) right click on the "Setup.exe" file, go to properties and set the compatibility to Win XP SP-2

  (4) run the configuration file and wait for Windows Vista to give up the search on the web, ignore the 'warning' when he

  comes to the top and connect the scanner to complete installation as you did under Win XP (or earlier versions)

  NOTE: You will have to wait a long TIME for the next window appears once complete Vista

  research on the web. It seems that the reason why a lot of Vista with the Epson 1200U Scanner users are

  running out of patience, that it was my problem-so, the Eureka moment happened!

  My camera works great! The only loss is you open TWAIN in the application, is not
  automatically start more. This may be fixable, but I'm glad it works and I don't know enough to make the necessary changes in the registry, etc.

  Thanks again for your help!

  try to use MS-FIXIT

  http://support.Microsoft.com/mats/slow_windows_performance/

  If that didn't help, then maybe you would not survive the installation completely, and you will have to reinstall vista with updates it's still once, don't worry, it happens to all peoples.

• Vista will not register, the computer crashes with log off

  Computer crashes with log off of Vista.

  Hello

  Check your antivirus program to see if it is set to check the floppy drives, CD/DVD, or other removable media drives
  on closed session, restart, or stop. Those who do this will be often blocks that you met.

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/kb/929135
  How to troubleshoot performance issues in Windows Vista
  http://support.Microsoft.com/kb/950685

  Optimize the performance of Microsoft Windows Vista
  http://support.Microsoft.com/kb/959062
  To see everything that is in charge of startup - wait a few minutes without doing anything - then right click on the task - bar
  The task manager - take a look at stored by - Services - process - it is a quick reference (if you have
  a small box in the lower-left - show for all users can check only).

  How to check and change Vista startup programs
  http://www.Vistax64.com/tutorials/79612-startup-programs-enable-disable.html

  A quick check to see that load method 2 is - using MSCONFIG and then display a list of the people here.
  --------------------------------------------------------------------

  Tools that should help you:

  Process Explorer - free - find out what are the files, registry keys and other objects processes have opened, the dll
  they loaded and much more. This exceptionally effective utility will show you even owned by each process.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896653.aspx

  Autoruns - free - see what programs are configured to startup automatically when your system boots and you
  opening of session. Autoruns also shows you the full list of registry and file locations where applications can configure auto-
  start the settings.
  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
  Process Monitor - Free - monitor the system files, registry, process, thread and DLL real-time activity.
  http://TechNet.Microsoft.com/en-us/Sysinternals/bb896645.aspx

  There are many excellent free tools from Sysinternals
  http://TechNet.Microsoft.com/en-us/Sysinternals/default.aspx

  WhatsInStartUP - free - this utility displays the list of all applications that are loaded automatically when Windows
  starts. For each request, the following information is displayed: Startup Type (registry/Startup folder).
  The command - line String, product name, file Version, company name, location in the registry or the file system,
  and much more. It allows you to easily disable or remove unwanted programs that runs in your Windows startup.
  http://www.NirSoft.NET/utils/what_run_in_startup.html

  There are many excellent free tools to NirSoft
  http://www.NirSoft.NET/utils/index.html

  Window Watcher - free - do you know what is running on your computer? Maybe not. The window Watcher says it all, reporting of any window created by all running programs, if the window is visible or not.
  http://www.KarenWare.com/PowerTools/ptwinwatch.asp

  Many excellent free tools and an excellent newsletter at Karenware
  http://www.KarenWare.com/

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• How can I remove "Log Off" from the Start Menu?

  The Shut Down window includes Log Off option, and I accidentally disconnected when I did not.

  Hello

  You are using the classic Start Menu?

  Check if one of the steps helps you accomplish the task.

  Step 1: Remove the option of logging for the Normal Boot Menu.

  a. click the Start button, type gpedit.msc and press ENTER.
  b. click User Configuration > administrative templates > Start Menu and taskbar.
  c. double click on logout remove from the Start Menu.
  d. Select enable and click on the OK button.

  Step 2: Remove Logoff to the Start Menu classic option.

  a. click the Start button, type gpedit.msc and press ENTER.
  b. click User Configuration > administrative templates > Start Menu and taskbar.
  c. double-click Add Logoff to the Start Menu.
  d. Select Disable and click the OK button.