Webcam on Qosmio F60 flashes blue and Red
Hi guys, I have a Qosmio F60. The problem, I think that I am facing right now, it of the flashes between blue and Red webcam for awhile and goes back to blue. And it's kind of hot behind the webcam on the laptop cover.
Is it supposed to become hot when I make video calls?
And what could be causing the flashing of the led light for the webcam.
Hello
Don t know exactly what the blinking led could mean but I have a question;
The webcam works properly? Can you use this as supposed?
If Yes, then I wouldn't be worried
Incidentally that cam should not get hot, I think the FL inverter that is placed behind the screen is hot, but it's ok.
Tags: Toshiba
Similar Questions
-
Air-cap2702i-a-k9 flashing blue and red, suggestions?
any suggestions on the question
Got a air-cap2702i-a-k9 flashing blue and Red
When I access the console cable
a: the ap
command prompt
Thanks in advance for all
advice/suggestions
Hello
This message means that the AP is in Rommon mode, and he needs to start with the IOS to work properly. In rommon mode you can check variables initialization to next recharge and try reloading the AP. For example, the set command will tell you the next boot image, you must ensure that this underlines the IOS of AP 2700.
AP: the value
Boot=Flash:/C1140-k9w7-tar.124-21A.JY
You can manually set all initialization variables as above, IOS ip address, gateway, and you can also push new IOS image after download of EAC, if it is not an image valid. See the link below to learn more:
https://supportforums.Cisco.com/document/56156/access-point-ROMMON-RECOV...
Concerning
Delphine
* Please note the useful messages *.
-
If make it my video it flashes yellow and Red logos added. My computer is Mac...
Thanks, Neil
I upgraded my Mac OS El Capitan and now everything was normal again
-
Hey, guys!
I'm new to the forum and I apologize in advance if there is another thread with the same problem. I wanted to just share some pictures and maybe get answers to my problems. As mentioned in the legend my macbook air that I bought last year has green and Red pixels flashing on the screen. It covers just a vertical strip of 3-4 cm on the left side. It does not affect the performance but it gets really annoying. Im guessing there is something faulty with the video card or the matrix of pixels.
Here are some photos: https://scontent-vie1-1.xx.fbcdn.net/v/t1.0-9/13237711_1269211393091692_22297742 29739562934_n.jpg? oh = aedf6434da04f4dbdb6... and https://scontent-vie1-1.xx.fbcdn.net/v/t1.0-9/13239870_1269211399758358_20321648 26971687538_n.jpg? oh = cac08d41fe32ec25fb1... .
Anyone know what seems to be the problem? In addition, the 1 year warranty covers these dysfunctions of the material? And how long would it take for the apple service center to fix it?
Thank you in advance!
See you soon,.
VasilIt looks like a bad graphics card. Bring any Apple store, it must be covered under AppleCare.
-
Re: Qosmio F60 - 100 Blue-ray will not start film or same menu
Hey guys!
My Toshiba Qosmio F60-100 works perfectly. He has just blu ray player that is causing problems, because whenever I put a Blu - ray drive, it starts the program "Win DVDBD" but never starts playing the movie or even the menu.
I don't know how I can solve this problem.
I tried already with the famous update, but when I try to install it, I get a message that the update is not for my computer.Thanks in advance for your help.
Volki
Hello
Have you tested different Blue-ray discs?
I got this Toshiba FAQ
+ Some Blu - ray discs are going to have problems when played on the models of "WinDVD BD for Toshiba" version 8 +.
http://APS2.toshiba-tro.de/KB0/TSB0402V40000R01.htmCheck it!
-
Qosmio F60 - Reboot over and over again
Hi, I put a Qosmio F60 today and it works.
The computer went straight to the screen configuration and then restarted. He made over and over again for hours now. I tried to use the recovery partition to enter into the computer, but as soon as we proceed after recovery he opens windows 7, then the configuration screen and restarts the computer.
It is brand new and I didn't turn it on.Anyone have any ideas on how to solve this problem,
Thank you
Darren
Hello
From my own experience, I can say that after the first launch of the laptop restarts often enough (10 times or more I think) and you still get the same screen. If you get this screen, wait a little more Setup will be complete. This is not a bug!
Maybe it s too late for that now, you can try a HARD drive recovery, but after that he'll also leave quite often so you should drink coffee and read the newspaper Meanwhile ;)
-
Yellow, blue and red lines on my video projects.
I have problems with my Premiere Pro video software because there are yellow and red lines going through the videos. When I export the project, you can see the lines in the video. I have two hypotheses, either my infernal and external hard drive is almost full, or it happened after I downloaded Capitan.Hop El I can help
Issue with El Captian, turn off the MPE material in project settings for now.
-
Qosmio F60 - stop slower and a blue screen with driver out of State
Hello
I've only had the F60 for a few weeks and although it worked well for 2 weeks, 2 days has been a disaster. First AutoCAD crashes during startup and does not at all.
So, my Outlook 2007 do not meet 1 / 3 times.
Finally, whenever I stop, this is a very slow stop (10-20 minutes) and then blue screens, restarts and says that it is a driver fault status.Help - what someone else had these problems?
You'll be lucky if someone else uses the same software as you and you can check this.
My personal opinion is that all of the problems described are certainly software related issues.We do not know how you set up your laptop, what modules are preinstalled, software that runs in the background and all other important info is not easy to discuss these issues.
I'm sure that you do not have these problems on the first day, right?
I know you hate me now, but maybe you should back up all your important data and install the OS to help original Toshiba recovery image. After having this software to remove all the preinstalled you do not need (additional Toshiba stuff) and continue with the installation of Microsoft Office. Check the functionality and continue to install your favorite step by step software and watch carefully what happens.
Also disable automatic Windows Update and change this option to check for updates but let me choose... option. So, you will have full control over updates.
-
Photo of reminder on the monitor with the vertical strips/stripes blue and Red
Play a clip in the timeline, the monitor and the xetrnal monitor shows the clip with thin red vertical lines/bands at constant distances.
The AVI in body 5.5 clip plays, I imported it to the 5.5 even as asset, but playing the AVI in still image is distorted, as mentioned.
I work in PAL.
Anyone suggestions what's happened and how to eliminate the distortion? Thanks for the reply.
Chris
If you have an nVidia graphics card, and then set the 3D settings 'let the application decide '. Vertical scratches should disappear.
-Jeff
-
Qosmio F60 - pad touch and the keys do not work
I tried to reinstall the control button under additional utility, but there are still problems.
Hi wilson2022,
Do you mean the buttons light between the keyboard and the computer laptop screen?
If so, they are controlled by added value package, but before you reinstall this tool, first remove the old version. Restart the computer, and then install the latest version of package of value added again.
Also, what OS do you use?
-
Qosmio F60: No keyboard and joystick game Super Street Fighter 4
When I install a Super Street Fighter 4 Arcade Edition want my keyboard works not at all and I really need some help with that... and it did not work with joystick too
Help, please
Thanks in advanceHello
Check the guy in game settings.
and I recommend checking out some gamer forums because it is not a problem of Toshiba laptop but issue of game.I searched on the internet and it seems that was published a fix that resolves the following issues:
+ Here is the official list: +.
+ - As requested by users, we have added support for the following rendering resolutions: 640 x 480, 720 x 480, 720 x 576, 1280 x 1024 +.
+ Added support for a wide range of arcade sticks: many arcade sticks which previously would not be recognised should now be recognized (again, no guarantee your right stick/cushion is covered but it is much more present natively than in the past). +
+-Fixed a bug causing just the stick entered (left / right / top / bottom) to not be recognized.
+-Fixed a bug that sometimes caused additional lag/slowdown mode battle without end.
+-Fixed a bug with the controller mappings doesn't spare always, especially when adding / removing controllers +.
+-Fixed a bug that would allow players to go in line with scores of incorrect reference, which could affect match manufacturing +. -
Qosmio F60 - blue screen all in sleepmode
Hello community,
I have a problem with a Qosmio F60 - 10 L and Windows 7 family:
15 minutes after the passage in sleepmode, I get a blue screen and
the Qosmio restart the system.Do you know how I can fix this bug?
Thanks for the reply!
Joerg
It is not easy to offer an easy solution for this. Who knows why this is happening there?
What error code appears in BSOD? -
Qosmio F60 - 10j frezzes at random and often a few seconds
Hello
I have a Qosmio F60 - 10 days and he frezzes randomly and often a few seconds when I watch a video, I play or when I use the tv tuner.
I tried to update the drivers for video card a nvidia geoforce gt330m.I downloaded from the homepage of nvidia but worse.
The laptop freezes completely, and I had to turn off.I returned the old drivers and the laptop returns to the freezing of the old frequently and randomly for a few seconds also.
Recently, about a month ago this laptop freezes at least once a day completely every day.Please can someone help me, thanks.
Have you noticed this behavior from the first day?
It is not easy to say why this happen, but these things happen very often when the HARD drive is occupied by a background as HDD scan process or something similar.When this happens you noticed permanent activity HDD (HDD LED)?
-
Qosmio F60 and Win7 x 64 drivers
Hi, I just bought a Qosmio F60:-PQF65A-016002 and done a clean install of windows 7 Pro x 64.
But now I am unable to find drivers for it. I looked in the help of toshiba, but it brings no drivers for my machine.
If someone could point me in the right direction that would be great.
Thank you
AlastairHello Alastair
Why make this stupid mistake to hundreds of other owners of laptop?
It makes sense to check support first and ensure that certain operating system is supported and then installed clean OS. Isn t it?Qosmio F60 is portable newest and even not available everywhere in the world, so you must be careful with the support in his favor. The drivers will be offered soon or later, but it may take some time.
What to do now?Return to factory settings or try using some drivers for other models Qosmio with a similar hardware configuration. Try with X 500. It is certainly supported for Win7 x 64. Maybe Toshiba tools and utilities can be installed on your F60.
Play a little with it. Nothing can now goes wrong.
-
PQF65A Qosmio F60 - need help to find the BIOS
Hi guys.
I have a TOSHIBA Qosmio F60 PQF65A-016002 and found no indication of how to enter the Bios.
I put to level my 8 GB memory and it is not working properly when I insert the new memory, so I need to see the settings. Installation of HW does not show me what I need to know.Any help would be greatly appreciated!
As I remember the Qosmio F60 supports BIOS Toshiba.
It's a little different and to access the BIOS press F1 or ESC after power on.
Maybe you are looking for
-
How to set paragraph margins in a document
I would like to define paragraph L & R margins in a word processing document, but I find only the margins of the Document in the Inspector. If I try and create a new section for paragraphs with new margins, a page break is created. Help pages 'Defin
-
How to stop this message "do you want to install the plugin required to view media on this page. I don't need the plugin to play the video ok
-
CD / rom DVD drive info is not updated after the disc is ejected
I have several machines to windows vista, which fail to update their information to drive under the my computer after I eject a disc. Normal operation is that the display tag would go back to just the drive letter. Now, he continues to display the
-
window will stop in less than a minute, stops and restarts everytime I use the computer
message-windows will be stop in less than a minute. appears, and then the computer stops and restarts. It's windows vista and it's this evertime I use the computer
-
Upgrade do on Photoshop CS6 - What options do I have?
Adobe Photoshop CS6Adobe Media PlayerCS6 Adobe Extension ManagerCS6 Adobe BridgeAdobe Acrobat Reader DCPS6 full owners suite must be at level 7 or 8?I thought I was always up to date, but a friend mentioned about 7 and 8 only and I just want to knowI