CD / rom DVD drive info is not updated after the disc is ejected

Similar Questions

• numbers of drive and beaches not updated in the Finder?

  Hello

  I recently found a hard drive I hd lost and there a lot of music that I have imported CD years ago.

  I have added to my iTunes library and noticed that there is lack of follow-up and disk numbers.

  I've been correcting these and while everything in iTunes is the correct order, good number of files in the Finder do not show the disc and track numbers.

  It's not a big deal, but I would like to know why this is happening.

  There is nothing wrong with the pieces of music and tried to restart, duplication and re-import after change of track and disk number.

  Concerning

  In iTunes > Preferences > advanced there are two options, keep... and copy... I think at least one of them is turned off the coast, maybe both. The other made sure that everything you add to the library is copied to the folder media, the first updates the file name and the path of what is in the press kit in response to changes in metadata. Unless you have good reason not to do it, then I would recommend allowing these two options and the consolidation of your media in the designated iTunes Media folder. Note that the titles in .wav format are not tags. These will lose information deleted and re-imported. It is also possible to create without tag mp3 files or mp3 files with several tags that iTunes could not update properly.

  TT2

• DVD players - cd do not work after the removal of the Trojan horse. the charge of the agent/gen-rogue virus

  Hello, it struck during the night because when I woke up there were some msgs everywhere telling me I was infected and a center of fake security kept popping up.

  I closed and went into safe mode and ran sas scan I couldn't mbam to work, once the infection has been found I checked for removal and came off of sas and rebooted the pc. Everything seemed okay for a while, except that I had lost my wallpaper and photos and documents. But they were in another file owner and I was able to move them to the owner acct, I'm. Now I wanted to copy my docs and photos on a cd for backup and I get access denied or he'll go as far as the files are ready to write, but they will not write, I don't get an error msg. Just a beep.

  So far I uninstalled and reinstalled the drivers, no help.

  This is info on readers

  Description CD-ROM drive

  Loaded media no.

  Type of CD-ROM media

  Name TSSTcorp CDDVDW SH-S223L

  Manufacturer (Standard CD-ROM drives)

  Status OK

  Transfer rate is not available

  SCSI Target ID 0

  IDE\CDROMTSSTCORP_CDDVDW_SH-S223L___SB02___\3951393847365A43303337313234202020202020 PNP device ID

  Driver c:\windows\system32\drivers\cdrom.sys (5.1.2600.5512 (xpsp.080413 - 2108), 61,50 KB (62 976 bytes), 14/04/2008 02:10)

  Drive E:

  Description CD-ROM drive

  Loaded media no.

  Type of CD-ROM media

  Name ATAPI iHAS524 B

  Manufacturer (Standard CD-ROM drives)

  Status OK

  Transfer rate is not available

  ID of target SCSI 1

  IDE\CDROMATAPI_IHAS524___B___AL2A___\3533343234332033413331383234303539303737 PNP device ID

  Driver c:\windows\system32\drivers\cdrom.sys (5.1.2600.5512 (xpsp.080413 - 2108), 61,50 KB (62 976 bytes), 14/04/2008 02:10)

  If I could I would just reinstall the OS, but it is a built-in computer and I don't know how.

  Thank you in advance and any help is appreciated.

  running xp home, svc pk 3, ie 8, updated, have no idea of what kind of computer, it is, but if you need information sys, I stick it in the next reply.

  Thanks for the reply. Sorry, it took more time to get back to you. My meeting lasted a little longer than expected.

  Please can you me what burning software, if any, you have installed? Uninstall it.

  Then, download ImgBurn from HERE. Once installed open ImgBurn > tools > filter Drive load order. When the list appears, click to select each driver filter and then click 'remove the selected filter '. Follow the instructions. See the image below.

  

  Edit: Go to my computer > right click on each rom device > properties. Make sure that each player has a tab named "registration". Let me know the results.

• VIB not updated after the restart - ESX6

  Hello

  I have a strange problem while updating to ESXi600-201511401-BG on 1 of 3 guests. It seems that the fix is installed correctly, but it disappears on the next reboot.

  
  

  The commands I tried to help include, but none of them seems to work:

  esxcli software update /vmfs/volumes/path/Update/ESXi600-201511001.zip esx-base - d - n vib

  and

  Profile of esxcli update d software /vmfs/volumes/path/Update /ESXi600 - 201511001.zip - p ESXi - 6.0.0 - 20151104001-standard

  The result is:

  Message: The update completed successfully, but the system must be restarted for the changes to be effective.

  Restart required: true

  VIBs installed: VMware_bootbank_esx - base_6.0.0 - 1.22.3247720

  VIBs removed: VMware_bootbank_esx - base_6.0.0 - 1.20.3073146

  VIB list after installation check seems to be updated, but after the restart, he returned to the old version.

  All guests were built fresh at about the same time using the same media however, this server has a problem. By comparing each server the only difference in VIBs is VMware_bootbank_esx-base. Everything else is the same...

  Any help would be appreciated.

  Thank you

  Derek

  VMware technical support identified the error "MSI - X not supported by the device" in boot.gz and recommended to update firmware or try to reinstall. As the host was running the same firmware as the hosts who have been updated and not happy with the way recommended reconstruction of the host, I did some research in error.

  A bit of googling suggests that the error relates to USB interrupts, which lead me to realize that it was the only server currently connected to a 16 ATEN KVM (cables VGA/USB) port. After unplugging the KVM, I was able to apply successfully the update...

  If anyone else has this problem and has devices connected to USB ports, I would disconnect them and try the upgrade again.

• CD ROM / DVD drive not recognized and viruses on the computer

  Can anyone help please?
  My CD ROM / DVD Drive failed. I tried troubleshooting etc but not available. The computer does not recognize I have a CD / dvd as a player he says that is not recognized by the register?
  I also have a virus that I can't get rid of, it's maybe part of the problem (Trojan horse - Spy.HTML.Smitfraud.c) I ran many viruses, spyware and trojan controls but there is no cure yet?
  I tried the system recovery, but it won't let me get it back to an earlier date.
  I can't use my restore disk because the computer does not recognize the drive. A catch 22 situation.
  Can anyone offer any other advice that throw it out the window?

  Help from anyone would be much appreciated.
  Concerning
  PG
  "" "" Laptop user frustrated. ""

  [Edited by: admin on 3 July 05 22:11]

  HI Paul,.

  I think that your first priority will be to remove the virus from your laptop. The following link contains the virus details: -.

  http://securityresponse.Symantec.com/avcenter/venc/data/W32.Desktophijack.html

  You are shown in the BIOS to CD-ROM? If yes then set to be the first selectable boot device and you should be able to load your recovery disk and restart it.

  HTH

• How can I fix my CD-ROM drive or a DVD drive that is not recognized by Windows or other programs, so I can't play or access a CD or a DVD.

  How can I fix my CD-ROM drive or a DVD drive that is not recognized by Windows or other programs, so I can't play or access a CD or a DVD. Sometimes, when I click on one of the disks that it opens, but the page for the drive is empty. It also says to insert a disk, sometimes when there is a disc in the drive. How this can be fixed.

  Hi vtdubu,

  ·         Did you do changes on the computer before the show?

  Follow the steps in the article.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs

  http://support.Microsoft.com/kb/982116

  Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://support.Microsoft.com/kb/322756

• My HP Presario f 700 laptop does not recognize my CD/DVD drive and will not burn or play CDs or DVD movies.

  My HP Presario f 700 laptop does not recognize my CD/DVD drive and will not burn or play CDs or DVD movies.

  I have a lightscribe, CD/DVD player, and I started having problems about a month ago... I tried to burn a lightsribe CD and my computer told me that I didn't have a CD Lightscribe drive (I!)... then when I just tried to burn the music on the CD, he didn't do it either... Finally a week ago, I tried to play a movie on my laptop, and that does not work either.

  When I insert in the film or the cd, the drive lights up and I can hear the work, but it is as if she has no connection with my laptop and my laptop is not picking up the CD/DVD drive try to play a movie or a cd.

  A friend suggested that I go to the HP website and am trying to download a driver, but I didn't know what to do once I got to this website, and I don't know if it will work.

  If you know how to solve this problem, or if you have had a similar problem with your computer, please help, thank you.

  Hello

  Try the microsoft 'fix - it' for your problem below

  http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  and read this information too

  http://support.Microsoft.com/kb/982116/en-us

• My hard drive is not even read the disc (Dragon Age: Origins)

  Today I bought a new video game for PC (Dragon Age: Origins).
  After inserting the disc, I thought I could hear the drive reading the disc, but it kept stopping.

  This ended up in my computer not give me an error message saying that there is problem... it's almost as if he thinks that I have never inserted the disc.

  So I tried to run another game disc, and he managed to read the disc.

  Please help :(

  the required for the game is the following:

  OS: Windows XP (SP3) or Windows nice (SP1) or Windows 7
  Processor: Processor Intel Core 2 SINGLE 1.6 GHz or equivalent AMD Athlon 64 2/0 GHz processor or equivalent
  RAM: 1 GB (1.5 GB Vista and Windows 7)
  Disc drive: DVD ROM required
  Hard drive: 20 GB of disk space

  and I guess that video and sound are not the problem here.

  I'm not a 'computer' wiz or anything either, but after reading the label of my system, it seems that the requirements very well.
  they are here:

  OS: Windows Vista 64 - bit family Premium SP1
  Processor: Intel Core 2 Q6600 Quad-Core
  RAM: 4 GB DDR2
  Disk drive: Super multiformat DVD + RW DL with Labelflash
  HDD: 750 GB

  ... As you can see, taking me the time to post all this place really shows how frustrated I am... so please Helo me ASAP :(

  It is possible that you have a bad DVD drive.  Try it in another computer (a friend or relative) and if it didn't work for them either, you may have to contact the company for a replacement drive.  If it works on their computer and not yours, you may need an update of the firmware of your DVD player to make it compatible with the disc.  It is a rare event, but can happen.  You will need to go to the website where you made your computer and download the update of the firmware if available.

• Z600: computer does not start after the installation of the 5 TB SATA drive

  My z600 refurbished does not start after the installation of a SATA of Toshiba 5 to disk.  After removing the drive, the computer starts.  I have my computer too old to handle a 5 TB drive, I something wrong or is the DOA drive?

  Thanks for the info.  I added the GPT to my search and discovered what had to be done in disk management.  Here is a page with step by step instructions and photos.  http://www.howtogeek.com/193669/whats-the-difference-between-GPT-and-MBR-when-partitioning-a-drive/

• dv6 7309tx wanted: HP ENVY DV6 7309tx BIOS update after the corrupt bios, SP68425 F.2D does not work

  The problem began with a blue screen after the updated copy on the road on machine of internal to external hard drive...

  After the reboot, the screen went white and CAPS LOCK has 2 flashes

  Device: HP dv6 7309tx envy

  Current BIOS: 22/01/2013 F.24 / 181E

  Downloaded SP68425 with F.2D since 08/2014

  insydehflash.exe in the package on a spare computer (no HP) does not support the extraction to USB, I will need to update the bios on device dead...

  Device is now in HP PC Hardware Diagnostics UEFI, where I can add usb and start to update...

  However, the raw after extraction of sp68425 bin file is not accepted...

  and I can't go any further with the tool insydeh sp682425 because it does not allow me.

  There is no real BIOS option the last update on the HP support who is crazy enugh...

  F.2d

  FTP://FTP.HP.com/pub/SoftPaq/sp68001-68500/sp68425.html download: ftp://ftp.hp.com/pub/softpaq/sp68001-68500/sp68425.exe

  Please help to send me the appropriate files or explaining how I can generate in a different machine than the one update has no boot?

  Thank you

  Hi all

  If the solution was done by a kind shop in Hungary, http://reballing.hu

  and a specialist in firmware http://vinafix.vn

  So apperently my BIOS has been corrupted that CAPS lock sign showed and it could have been rewritten with HP Diagnostics if HP could provide the RSA key for her...

  In this case it is not provided, you don't have that one other solution, to find a nice (as reballing.hu) repair shop, where the guys are nice enough to disassemble your computer, take the chip and write the data without the requirement of RSA software HP Diag using a writer BIOS correctly. You can also buy writers of the bios and the tools, but he could be uite costly and risky for you to do...

  So you have a repair guy, the only other thing that you might need to trust is the dump of the BIOS correct, please note that the supplied with the softpaqs .bin file is encrypted, so it must be decrypted, it is not an easy task, it worked for me too after awhile, but better to find a provider of bios (saves time for you as well and that is why HP is not willing to give it to you, you have two choices: make a work computer, and read the bios in this way (you must have the identical chip and content, so preferabily the same card mother or product)

  Or go to www.vinafix.vn and ask them to provide you with, these people are kind enough to explain how the thing works and what you need to write your own return data.

  So once that you set is not more than 30 minutes for a handy guy and as they work at the time, it is fairly cheap as well, it cost me 25 USD total (10 for bios) and 15 for the actual work done

  It's a shame that yu can not really find information about this threat, and also that it can happen to your computer at any time it seems that, always in waiting to see what caused, and if she came back or not... but as of now, I am pleased that the computer is back on!

• My driver support does not work all the time, won't let me connect, keeps losing internet connection.

  * Original title: SUPPORT of the PILOTS LOSE INTERNET.

  My driver support does not work all the time, won't let me connect, keeps losing internet connection.

  What do you mean by "driver support?

  If you have installed one of these offers of support software driver, you have installed malware.  The vast majority of them no useful software and installing a lot of malware on your computer.

  The drivers are not the soft thing you should normally be updated.  I recommend the updated drivers only in the case of a problem that has to solve, and it's rare.

  Is the ONLY source, you should consider for driver updates or OEM support site.  Even those who sometimes go way overboard in trying to update the drivers.  The latest Dell systems are equipped with updated software that checks for new updates every day.   In most cases, drivers are rarely updated after the first year of a product.

• Delete buttons do not work after the update of 10.11.16.

  Delete buttons do not work after the update of 10.11.16.  The delete button works if I pointed out and then delete, but not if I use the "back" button or try a removal of uniqueness.  It is a problem in all applications.  I tried it in textedit, search google chrome, safari search and find finder engine.  There seems to be a 'problem' of the keyboard' as far as I know nothing happened to my keyboard, IE the spilt coffee, that recent warming has been updated to 10.11.16.  I use an iMac (27-inch, late 2009) with i5 clocked at 2.66 GHz, running OS X El Capitan.

  Any suggestion would be appreciated.

  Greetings, r.fromstouffville!

  It seems that the 'Delete' on your iMac keyboard key works as it is supposed to be after update to OS X 10.11.6. I'll be happy to help you get these keys working again.

  Reset of the controller management system (SCM) on your Mac - sometimes it's a matter of simply resetting your iMac SMC. Open this article and scroll down to "Reset the SMC on Mac desktop" section and follow the steps there.

  Try safe mode if your Mac does not start -even if your iMac, safe mode startup make sure it starts successfully.

  How to test one question in another user on your Mac account - use this article if restarting in safe mode did not help.

  Use Time Machine to back up or restore your Mac - if your keyboard does not always work as it should, I recommend you save your iMac to ensure that your personal data are safe. It is always better "to have" a backup for a backup "need."

  On OS X Recovery - if you have reached this point, you encounter the same problem in a test user account, that would mean it is a system-w. Start your iMac into Recovery Mode and reinstall the operating system.

  Thank you for the communities of Apple Support!

• My apple pencil does not work after the 9.3.4 update.

  My apple pencil does not work after the 9.3.4 update. I tried to restart but still does not work. Tried to forget the device and whenever I connect the pencil to the ipad pro, it is said that it does not recognize the cable / device. Help please.

  < re-titled by host >

  Greetings RechargeableJam,

  Welcome to the communities of Apple Support!

  I see that your Apple pencil does not work after update to iOS 9.3.4. I guess it's about to have a problem with something that worked with the previous version of the iOS software. I'm happy to help you to help you find the best resolution.

  First of all, let's close open applications on your iPad Pro. This can ensure that there is nothing running in the background that is causing a conflict. The following article will help you:

  Force a nearby application on your iPhone, iPad or iPod touch

  Then connect the pencil of Apple and see if it is recognized for the time being. If you don't see the Pair button, wait a minute while your Apple pencil costs. Then disconnect your Apple pencil, Plug and back on hold until you see the button in hand.

  Best regards.

• Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

  I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

  Firefox Pei
  "C:\Program Files (x 86) \Mozilla" PEI

  Nothing happens with every order.

  I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

  If you have any ideas, I had appreaciate that your expertise!

  Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
  you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

  Fix Firefox problems caused by malicious software

• Calendar in dock not updated to the date of the day after El Capitan updated to v10.11.5

  El Capitan, updated in version 10.11.5 May 25, 2016, now the calendar in the dock is not updated to the current date, everyone had it?, how he was healed?

  See you soon

  Bill Edge

  What happens when you inspect system preferences > Date & time?

  • The correct time and Date displayed here?
  • Your time zone is correctly indicated?