Webcam stopped working with the cat
Original title: hardware device-webcam
I have hp pavilion dm41165dx I often use the webcam in the chat of yahoo messenger, but now it does not. I tried to implement the ym video and voice and his work but when I use the webcam, a black is displayed; I tried to open the webcam by the media button, but it does not open. How can I make my webcam working again?
Hello
What operating system is installed on the computer?
Method 1: Follow the steps in the following link to resolve problems with the webcam and check if that helps.
Method 2: If the problem persists then download and install the latest webcam and display drivers and check if the webcam works. You can download the drivers from the following link.
http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?cc=us&DLC=en&LC=en&product=4308943&
Tags: Windows
Similar Questions
-
Text element stops working with the keyboard navigation
I'm part of text for some reason disabling any and then enable it. Unfortunately, after you activate the text element, it stops working with the keyboard (with the tab key) navigation, and the cursor does not move to the order of the day. Could you please throw some lights? I'm stuck here! Thanks in advance.Hello
After allowing one more time, you must set its navigable property to true.set_item_property('item', NAVIGABLE, property_true);
Please indicate if it helps you or correct
Danish
-
Acer Crystal Eye webcam stop working and the screen is blank
* Original title: Webcam screen is black does turn it off by mistake?
Acer Crystal Eye webcam stop working. When I click on it, the screen is black. Turn it off?
Hello
-Have there been recent changes made on the computer before the show?
I suggest you to follow the steps below and update us with the results.
Method 1: Run the hardware and devices Troubleshooter and check.
http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
Method 2:
This problem can occur if the drivers are corrupt. You can try to uninstall and reinstall the drivers for your webcam. Download the latest drivers on the manufacturers of Webcam site and save it on the desktop.
http://support.Acer.com/us/en/product/default.aspx
Update drivers: recommended links.
http://Windows.Microsoft.com/en-us/Windows7/update-drivers-recommended-links
Updated a hardware driver that is not working properly
http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly
Method 3: You can try the steps and check.
a. disconnect and then reconnect the Webcam.
b. disconnect other unused USB devices.
c. use a different USB port on the computer. If you can, connect to a USB 2.0 port.
d. If you are using a USB hub, disconnect the Webcam from the hub and connect it directly to your computer.
e. restart your computer and check.
If the problem persists, I suggest you to contact the Acer Support for assistance on this issue.
Let us know if it helps!
-
RealDownloader has stopped working with the upgrade to FireFox 22
RealDownloader V 1.3.2.28 stopped working with my 'security' was last updated to FireFox. FireFox is now V22
I have tried to reinstalled realplayer, realdownloader, deactivation / activation addons / plugins
Can't seem to work - when I smile on a YouTube video for example, the 'Download this video' button of RealDownloader does not appear. Works fine in Internet Explorer
Hello dmcentee, real is aware of the problem and working on a solution - please refer to https://realnetworks.zendesk.com/entries/23689856-Download-This-Video-option-does-not-appear.
-
My bi-ecrans Setup has stopped working with the latest update of Windows
My bi-ecrans Setup has stopped working since the last windows update. The second screen is relegated to never turn on and in the part 'View' of the Control Panel, I can't change the 2nd monitor resolution of anything in addition to 480 x 640. I installed the latest drivers for the video card and two monitors. I have everything down, powered, entretienavec left for a few minutes and fed up, nothing. It has been like that for a few days now. Any advice would be very useful,
Thank you
Tyler
Details:
PC: HP Compaq 8200 Elite
Graphics card: AMD Radeon HD 6500 Series
First monitor: ViewSonic 2030
Second monitor: Dell 1908FP
All pilots are underway according to Dell, ViewSonic, AMD and Microsoft.
Latest patches from Windows Update killed my dual Setup monitor:
Update of security for Microsoft Office PowerPoint 2007 (KB2596764)
A security update cumulative for the stop bits ActiveX for Windows 7 for x 64-based systems (KB2618451)
X 64-December Windows malicious software removal tool (KB890830) 2011
Update security for Windows 7 for x 64-based systems (KB2620712)
Update of security for Microsoft Office PowerPoint 2007 (KB2596912)
Update for Microsoft Office Excel 2007 (KB2596596)
Update of security for Microsoft Office Publisher 2007 (KB2596705)
Update of security suites for Microsoft Office 2007 (KB2596785)
Cumulative Security Update for Internet Explorer 9 for Windows 7 for x 64-based systems (KB2618444)
Updated for suites Microsoft Office 2007 (KB2596651)
Update security for Windows 7 for x 64-based systems (KB2639417)
Updated for suites Microsoft Office 2007 (KB2596789)
Update security for Windows 7 for x 64-based systems (KB2619339)
Update for Windows 7 for x 64-based systems (KB2633952)
There is no update stated in your post which could have implications on your graphics card, or its driver.
Have you installed the latest graphic driver AMD in the AMD site?
http://sites.AMD.com/us/game/downloads/pages/radeon_win7-32.aspx
NB this link is the 32-bit win7 driver.
-
Mouse and Trackpad stopped working with the update of Yosemite may 2016
I have an iMac that I bought in December 2012 with a magic mouse and trackpad. With the last update of Yosemite or work on so I have no way to enter anything in the computer. Has anyone else seen or resolved?
No way to re - start in safe mode? If you can, this can help.
To load your Mac in Mode safe, press in and hold the SHIFT key while it starts. You can now stop the SHIFT key when you see an Apple logo and progress bar. To exit Safe Mode, just restart your Mac without hold the SHIFT key.
NB. Google script.
-
Satellite A300 PC Diag stops working with the exception code
Hello
I have A300 under Vista 32 bit. I get an exception code you try to run the Toshiba PC DIAG utility. I uninstalled the Pack Toshiba value added & downloaded and reinstalled again. The message that appears is..."Diag PC has stopped working"
Signature of the problem:
Problem event name: BEX
Application name: PCDiag.exe
Application version: 4.0.0.1
Application timestamp: 476b541d
Fault Module name: BASICI ~ 1.OCX
Fault Module Version: 4.0.0.13
Timestamp of Module error: 4805a4c5
Exception offset: 00038aeb
Exception code: c000000d
Exception data: 00000000
The system version: 6.0.6002.2.2.0.768.3
Locale ID: 3081
Additional information 1: c858
More information 2: 3d2a20dcc5ac6b196502ede9a2965166
3 more information: 65b 9
Additional information 4: eee6adad555b506e470939add9a184c2Does anyone have a resolution? Thank you
To be honest I don t understand you.
What is an exception code? What did you do with him? Have you noticed this problem in the past?Is that the Toshiba PC diagnostic tool is part of the Toshiba value added package and who knows what you have done.
What you can try is to remove VAP, clean the registry entries for the Diagnostic tool and try to install VAP again in the hope, it will be working again. -
A Xbox controller stopped working with the PC
I have a windows pc 8. I used my xbox controller for games there a few months. Randomly stopped working. Before when I plugged it in, it vibrated, lit and then it was connected. Now when I plug it does not vibrate, and it does not turn on the controller. He says only: "unrecognized usb device". I went to Device Manager and nothing comes for a controller xbox either. When I used the controller on my pc I have installed all the drivers. Just plugged in, and it worked. I have no idea why it stopped working. I have not installed anything new recently. Any ideas?
Hi Jaysiff,
I imagine the inconvenience that you are experiencing and will certainly help you in the right direction to solve the problem. However, I would be grateful if you could answer a few questions to refine the question in order to provide you with better assistance.
- Have you tried to connect any other USB device to this new computer laptop? If so, was the same result?
- Are all the device drivers and updates of Windows updated?
According to the description of the problem you found error message "unrecognized usb device". The question may arise if the currently loaded USB driver has become unstable or damaged or if your PC requires an update for problems that could conflict with a device USB and Windows. This can also occur if your USB controllers may have become unstable or corrupt. So, I would suggest trying the following steps and check if the problem persists.
Method 1:
Please try the fixit (s) provided below which will help you solve common problems associated with devices and USB ports.
If method 1 does not work, try Method 2.
Method 2:
Remove and reinstall all USB controllers.
- Open Device Manager by pressing the Windows key + X and select Device Manager from the list. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
- In the list of the categories of equipment, locate and expand Bus USB controllers.
- Right-click every device under the Bus USB controllers node and then click Uninstall to remove them one at a time.
- Restart the computer and let the USB controllers get reinstalled.
- Plug in the removable USB device and test to make sure that the problem is solved.
Method 3
If the problem persists, I suggest to update the drivers and follow the steps in the article mentioned below to connect and see if it helps you to solve the problem.
How to connect a controller to wireless an Xbox to a PC
Hope it would help. If problem persists always post back with the current state of your computer and the result of the proposed suggestion, we will be happy to help you.
Kind regards
-
scrolling stops working with the mouse on the work area
For some unknown reason view the left work area or right, using my mouse dragging my finger on the mouse or the touchpad of my MacBook, stops working.
I continually leave logic and re - open so he can scroll through how I want it. This usually does not last long, until I have to again re - opn logical
Anyone know if this is a bug or my settings?
I have Logic Pro X 10.2.2
MacBook Pro retina El-Capitan 10.11.4
Logic Pro X, OS X El Capitan (10.11.4)
Just loosening because of this "gentleman".
It is a problem.
Fix this Apple, please.
-
New Z400 Bluetooth stopped working with the error code 43
My Z400 arrived last Friday and its BT stopped working two days later. When I checked its condition in the Device Manager, I found this error message in the property box: "Windows has stopped this device because it has reported problems. (Code 43 "
Googling this code, I found many reports, and even for Windows 7, or BT Intel, so it looks like a Microsoft driver problem and is not a hardware problem. I wonder if this has happened to anyone else here and found a fix for this.
Hello
Can try you reinstall the drivers?
You will not find more here
http://support.Lenovo.com/en_IN/downloads/detail.page?docid=DS033356
Or in the folder d ' pilot training. -
Windows Media 32-bit Player has stopped working with the error "failed to run the server.
Original title: Windows Media Player does not start
I am running window 8.1 on a HP laptop. I have the two 32-bit and 64-bit Windows Media Player installed, I can start 64-bit with no problem, but 32 bit work do not. When I try to play music directly I get the error "Server execution failed", I tried all the option provide fron uninstall and reinstall as has been suggested, but nothing helped. I need to have the 32-bit to run or have the 64-bit by default. Help!
Thanks for the reply, but after working with it, I solved the problem.
1. rename the program (x 86) folder (32-bit) / Windows Media Player for everything you want
2 copy the Windows Media Player folder in the Program Files (64-bit) folder and paste it into the program file (x 86) folder.
3. This puts an uncorrupted in the default path, Windows Media Player
This worked very well for me. It also leaves a version uncorrupted for future needs.
Sometimes simple is better.
-
PS CC 2015 stops working with the message after a minute or so below.
Adobe Photoshop CC 2015 has stopped working.
Looks like that it crashes when closing the files.
It must still go to the Appdata folder, then go into the path: Roaming\Adobe\Adobe Photoshop CC2015\Auto recover
Move all the files under auto recover on the desktop
Then, launch Photoshop and go in Edition > Preferences > Performance > uncheck the option to use the graphics card processor
Click OK and restart the application Photoshop
Try to work in and it should work fine now.
This means that the problem is related to the graphics card so, you will need to update the graphics card drivers.
Also, if you want to go back to version CC2014, you can follow the steps to install the previous version app in this artcile:
https://helpx.Adobe.com/creative-cloud/help/download-install-app.html#topic-3
-
simple AppleScript has stopped working with the latest version of numbers
Hello
I have a simple AppleScript that converts marked cells in number of "-" to "+". Now with the new version of numbers (3.6.1) Applescript only converts the first cells and ignores the other marked cells.
I'd appreciate it if someone could have a look?
Thanks in advance!
on run {input, parameters} --select cells, run; converts positive numbers to negative; and vice versa tell application "Numbers" to tell the front document to tell active sheet to tell (first table whose class of selection range is range) tell the selection range to repeat with i from 1 to count cells tell cell i try set its value to (its value) * -1 end try end tell end repeat end tell --end of script return input end run
Hello
Because the selection changes when the script change the value of the first cell, numbers select this cell.
Use the get, like this:
say (get selection range) to repeat with i from 1 to count cells
-
brother MCF685 printer stop working with the home network. I did something wrong
Have a brother MCF685CW up until a month ago was working fine on my network. All computers on my home network have been able to print on the printer. I don't know if I was doing something by mistake or something is wrong, but it will not print from any computer on my network. I need help
Hi HSWV,
· You receive an error message or error code when you try to print?
· The computer is connected to the network with windows XP installed?
See the links below: resources for the resolution of the printer in Windows XP problems: http://support.microsoft.com/kb/308028
Error message appears after printing to a network printer: http://support.microsoft.com/kb/282833
-
That's all. I change all settings, preferences.
Also, tabs/fonts on tabs seem smaller, which is a problem, too.Thank you very much. It works now. Be sure not to put in the HTML code etc that someone had noted.
Appreciate the help!
Maybe you are looking for
-
I have opened the emails. they simply never open... They circle little continues to run but the mail does not open.
-
Need satellite S50-B-15F - Details of the 256 GB SSD
Hi all Can someone tell me what is the brand and model of the SSD 256 GB drive in the Satellite S50-B-15F laptop Toshiba comes with that? Product information is very good except the SSD which is a shame... I know that the SSD itself will be definitel
-
Impossible to update my device if Roamin' software
I'm out of my home network, I am roaming, but when I am trying to update my device software. via the settings > about phone > system updates error "System update is available in home network only".
-
When I print a Word document, it prints the document ok but themn also prints a 'report' of some sort... How can I disable this function... it of on my laptop or is it on the PHOTOSMART HP 2050 printer
-
My computer stays on 24/7. turn a short time i wat it too sleep.