Webservies in OIMM 11 GR 2

Similar Questions

• LabVIEW.ini WebServer.TcpAccess

  What does the c stand for in this article of LabVIEW.ini: WebServer.TcpAccess = "" + c * ""

  "" c + indicates that the address has access to view and control a VI remotely. "" »

  See here:

  http://zone.NI.com/reference/en-XX/help/371361K-01/lvprop/app_websrvrtcpip_acces_lst/

  Kind regards

  Marco

• Write to clusters - WebServer

  Hallo,

  I m trying to use a webserve for data sharing.

  When I m using simple variables or small groups the system works without any problem using JSON to make the transformation (cluster to a string).

  The problem is when I need to use a huge amount of data (FAT cluster), resembles the input string (when Im trying to write data to the server) a of the limitations for this (max length).

  Could someone let me know how I should work this case? or any example for this?

  Thank you and best regards,

  I can't open your project because I do not have LV2014 (I 2013), but here are a few tips:

  Let's say you have a method of VI web service as follows:

  

  You can read in the VI, the POST data using a number of screws:

  

  It will return the data POST-ed to the web service URL.

  The HTTP Client POST VI will display either a string of data or to your Web Service key-value pairs:

  

  If you use a web browser... is using jQuery/AJAX to VALIDATE the data (http://api.jquery.com/jquery.ajax/) on the web service URL or create a simple HTML form:

• Configure a webserver at home suggestions please

  I post this in the forum of "Server" If there was a.

  I am curious about the implementation and hosting my own websites from home using my Mac Mini.  I thought to buy Mac OS X Server and uses that to configure things but a knowledge threw a key to monkey in my thoughts when she mentioned to my internet connection at home probably used what is called a "dynamic IP address", and not a static address, and because of that, it would be virtually impossible for foreigners to access my site.

  I thought I could ask the question here and get some good answers or advice.  If anyone can provide me with links or advice on how to achieve this, I would be interested to hear.  I need to know how to determine if my ISP is the allocation address dynamic or if I have a static address.  I also need to know if it is true that hosting a public web site will not work if I have dynamic IP addresses, and if there is nothing around that runs from pay a fortune to get a static IP address.  Finally, if things are that I can host my site here, I would like to know if OS X Server is the way to go, or if there are other recommended packages. Recommended reading is also useful.

  I am completely ignorant on the IP address as well as implementation aspect and administer my own site (I can create the site while I did this before and downloaded to a hosting service).

  Thanks for any help creative!

  -Tod

  I post this in the forum of "Server" If there was a.

  OS X Server

  There is a software that updates DNS servers to your changing address. search for DynDNS.

  Your maybnot of Internet service providers allow you to host a server on a basic internet service. They probably won't sue if you have little traffic, but if you make money on it or that your traffic is high, they might cut you.

• WebServer on sbRIO

  Hey guys,.

  I'm doing a Web server on a 9636 application NOR sbRIO. I think I have all the required software installed on the target.

  I built the Web server specification building and I can see that the Web server deployed under the option 'Web Services deployed"of the Web site NOR based Configuration & Monitoring Tool (screenshot attached).

  I joined a demonstration project, which is the target of sbRIO with a "static" (including index.html) file and the Web server for Build specification. The deployed Web server is illustrated in the attached screenshot. When I try to open 192.168.1.180/RIO_WebService/static/index.html, I get a 404 error.

  You have any suggestions, why I can not open the index.html page?

  I almost forgot: with the same exact configuration steps, I can deploy and reach the Web server on your desktop without any problem.

  I hope I made clear what the problem is. I you need additional information, please ask!

  Thanks in advance,

  Norbert

  Hi Norbert and welcome to the Forums EITHER!

  Have you tried accessing it using the port configured on the Web Application Server? So in your case, 192.168.1.180: 8080/RIO_WebService/static/index.html or something similar.

  The web service Setup seems good.

  Kind regards:

  Andrew Valko

  NOR Hungary

• Publication of data on a webserver cRio

  Hello

  We run a cRio 9022 and I have a file Labview real-time sensor data reading. The file runs when the Rio turns on, but for me to see the data in real time, I reset the vi. So I thought just to post the file to a Web server, so I can just login and look at the data via a web browser at any time, without resetting the host file. However, I had trouble publishing the file on the network. I went through all the publication be tutorials and tutorials of remote panels, but I web get "Access denied" or "Client Server does not support...". "or just a mistake of connection not made not of web.

  Any ideas would be really helpful. I'm fairly new to Labview so please excuse my naivness.

  Thank you!

  These links have helped when I did recently.

  Configuration of a real-time target remote façade panels

  Tutorial: Create and access a Web Service from LabVIEW

  LabVIEW Web Services FAQ

  The system that is running the browser used to access the cRIO will need to have installed at least a compatible (for what is on the cRIO RT system) the LabVIEW runtime version

  In my case, I enter this in the address bar of FireFox (which works better for me than IE) http://192.168.84.199: 8000Fast_Regen_Shutter.html and it just connects and works.

• I need to know why we webserver check regularly? This is a naïve question, but I still need to apply, where the question

  Hi I want to know the reasons in detail why can we periodically check web server? Thanks awaiting response

  Hello

  1. what operating system do you use?

  2. what exactly are you referring?

  Web server can refer to (computer) hardware or software (software) which allows to deliver a content that is accessible through the Internet

  The most common use of web servers is to host web sites, but there are other uses as storage of data or for the performance of business applications.

  The main function of a web server is to provide customers with web pages on demand. This means the delivery of documents HTML and all additional content that could be part of a document, such as images, style sheets and scripts.

• Webserver on compactrio problem

  I am trying to program a remote façade / website to control a vi running on the RT of a singleboard RIO

  the vi is just a control and led in a while loop (for testing)

  I tried:

  http://digital.NI.com/public.nsf/allkb/7FEE6BCFD264175C8625723E000D928E

  and

  http://forums.NI.com/NI/board/message?board.ID=170&message.ID=275186&requireLogin=false

  clear steps, but it does not work

  I can do a remote façade for a vi running on my pc, but not on the sbRIO.

  does not display the page wil load, but the vi.

  Can I get an example somewhere of how it's done?

  also why do you need to make an executable?

  is there any settings I need to check?

  Thank you

  solved!

  http://digital.NI.com/public.nsf/allkb/7F95D43D3F50FCAC8625710E000068E1?OpenDocument

  # The directives that apply to the server by default
  #
  ServerName LabVIEW
  DocumentRoot "C:/or-rt/system/www.<====  !!change="">
  Timeout 60
  AddHandler LVAuthHandler
  AddHandler LVSnapshotHandler .snap
  AddHandler LVRFPHandler
  AddHandler dirHandler
  AddHandler espHandler .esp
  AddHandler copyHandler
  DirectoryIndex index.html
  KeepAlive on
  KeepAliveTimeout 60

  Thanks for the help

• We put good permissions to pdf files on our webserver with XI Acrobat pro. Then, we want to load these pdf files on our web page client side, for examle into firefox (ff). Exist permissions or settings due to the ff load

  We would like to buy the adobe XI teacher, but we have already purchased software with which we can set the appropriate permissions for our PDFs (on our web server), but when someone downloads our Web page (with either firefox or ie) and open one of these files, the permissions installed is not supported connsideration due to the ff or ie use the pdf reader clean when loading the pdf file is inside of the web page.

  So we do not understand that such authority is - it, only a third of software (like ff, ie) - except acrobat reader - can crush and not take into consideration?

  The permissions are part of the PDF and do not change.  But as Adobe clearly warn some third party applications will ignore permissions.

  The PDF standard is open - this is why there may be several different applications to read PDF files. This open standard includes safety instructions, some developers do not know for various reasons, including an aversion to the idea that you should be able to protect your files. Make a complaint to the enforcement officials.

• Denied connection to SOAP WebServ

  Hello. Me with another question. I created a WebService (SOAP based) ASP.NET, I try to use as a source of data to my report BI Publisher. The web service works fine, but after I added the WSDL and the BI pub method, when I click on View, it fires this error:

  The report cannot be rendered because of an error, please contact the administrator.
  Connection refused

  I mention that the Web service is run locally on my computer, but the Pub BI hosted on our server, so I guess I have to change some settings of proxy. If someone has solved something like this before? Where should I change these settings?
  
  * [url http://www.java-forums.org/blogs/advanced-java/collection/] Java collection *.

  Daniel - Yes. You should probably change the proxy settings on the J2EE server that hosts the publication server. Please see the Doc

  http://download.Oracle.com/docs/CD/E21764_01/bi.1111/e18862/T527073T527080.htm#5234774

  Mike

• How can I connect to my webserver VM from the outside?

  I'm sure that there is an easy solution for this, but I searched without success.

  I run a Web server on FreeBSD in Fusion, and my Mac uses DHCP (static address can come in time).

  My VM (fusion 2.0.1) is connected through NAT, I also use my Mac as a local server for testing, but only to listen on 127.0.0.1

  Here's my question simply:

  My FreeBSD runs Apache and is set up to serve the site (example.com, say) and DNS settings are all up to date. (I know that the BSD Web server works fine because I can connect from Safari using the merger IP address directly).

  Now if from the outside (you, for example), type http://example.com/ in your browser, connect to my Mac via port 80 and Apache on my Mac will attempt to server web page. But what I really want, it's demand to go on the virtual machine without going through the Mac. (In analogies, there is a setting that allows some ports go 'on' the virtual machine, but merging doesn't seem to have it - I promise to change the merger, because it works best with FreeBSD).

  So in short:

  How to configure my machine Virtual Port 80, rather than the Mac doing listening to?

  MacGruder says:

  So in short: How do I set up my VM to Port 80, rather than the Mac doing listening to?

  I introduce it more as a proof of concept, then a full step by step guide because there are many variables and you did not really a complete topology of your local network and other relevant information to be explicit and accurate on a total scope of the project.

  Good on my MBP without Apache running in OS X and a Virtual Machine of defined merger on NAT with Apache running on the client, I modified the nat.conf and reset the VMware network and was able to directly access Web Server of the customer from another physical Machine on my local network.

  OS X host IP address: 192.168.1.100

  Merge comments NAT IP address: 172.16.172.128

  Another physical Machine on the LAN IP address: 192.168.1.3

  Named Fusion comments: webtest

  Installed the Apache server in comments and editing the web page by default so you can be sure I look what I expect to be looking at and not the host content of the Apache server.

  Stop and closed Fusion comments

  Edited "/ Library/Application Support/VMware Fusion/vmnet8/nat.conf" and added 80 = 172.16.172.128:80

  Restarted network VMware with: sudo "/ Library/Application Support/VMware Fusion/boot.sh"-restart

  Open fusion and began comments

  Editing another physical Machine on the LAN hosts file to add: 192.168.1.100 webtest webtest.com www.webtest.com

  Browser open on another physical Machine on LAN and typed http://www.webtest.com

  Now, I'm looking at the modified Apache file index.html.en default server prompt so it allows me to know that I can access a Web server on the Guest NATed through the Port 80 of the host of another system other then the host.

  Notes:

  Personal firewall should of course be properly defined to allow connectivity between the systems.

  If you what the outside world can then access if your host doesn't have a static IP address, then you will need to use a form any Dynamic DNS on the host computer.

  It is in any case just to let you know it is possible and it's just one of the ways of May to go on this subject and without all the relevant information, I don't have the time to enter in other scenarios.

  Hope that helps!

  Post edited by: WoodyZ

  Added the second - to - restart

• Need to download the link to Sun one webserver 6.1 SP13 Java

  Hi all
  can someone share the link to download Sun Java system web server 6.1 SP13.
  I need to install a 32-bit version on solaris 10
  
  Appreciate your help

  This is a full installation of the Web server, but it can be installed on an existing installation to upgrade/patch it. This has been the process of upgrading to iPlanet Web Server products for years.

• Cold Fusion webserver

  Cold Fusion is provided with a web server, or what I need to have something like installed PWS?

  ColdFusion using the built-in web server that comes with JRun. See http://livedocs.macromedia.com/coldfusion/7/htmldocs/wwhelp/wwhimpl/common/html/wwhelp.htm? context = ColdFusion_Documentation & file = 00001752.htm.

  Ted Zimmerman

• Allows you to publish Web sites and files Foglights Webserver

  Everyone had done it before? How can I do this?

  Hello

  I understood how to do this:

  You can create an html file in the following directory:

  ~/Quest_Software/Foglight/Server/default/deploy/root. War /.

  And you can join the file with your browser:

  http://IP-of-FMS:8080 / your-html - upploadare

  There is no authentication required.

  Best regards, Falco

• How can I transfer the emails I sent to my Outbox to a Web server for Thunderbird?

  I have an e-mail account in a webserver (STRATO Communicator), and I want to transfer all my emails from Thunderbird.
  I installed Thunderbird and I managed to transfer all the emails in my Inbox since the webserver to Thunderbird.
  However, I don't know how I can transfer also all the emails I sent to my Outbox in the webserver (STRATO Communicator) to Thunderbird.

  Can someone help me? I thank very you much in advance!

  E-mail POP accounts can only access the Inbox on the server.
  So if you use a Pop email account, then there is a workaround.
  In Thunderbird
  Move all inbox emails in other appropriate for organizing folders.
  This makes it easy to detect emails 'Outbox '.

  Log on to the webmail account and move all the emails from the Inbox Outbox

  then in Thunderbird use Get Messages to download your emails.
  You can then move these emails to a folder suitable as "sent".

  Please note that in Thunderbird, the "sent" folder guard a trace of which has been sent by you.
  The "Outbox" in local folders, is the Outbox for all mail accounts in Thunderbird. It is not a place to store e-mail messages.
  In Thunderbird, when you select 'Send', he sends an e-mail immediately and put the copy in the "Sent" folder However, if you use 'Send later', it puts the e-mail in the Outbox ' ' ready to go when you select "Send unsent messages", how the copies are stored in the folder "Sent" and deleted from the 'transmission '.