WebWorks compile example sketches - stuck!

Similar Questions

• [Playbook WebWork] Error compiling example, sketchPadStandard.

  Error compiling example, sketchPadStandard.

  Hello everyone.

  I just installed the environment well, I tried to compile the example.

  Can someone explain this error?

  Note that I have spaces in my way...

  It's the default installation path:

  C:\Program Files (x 86) \Research in Motion\BlackBerry WebWorks Packager for PlayBook\bbwp

  And yet it works... so always think he's prob depends on your JDK version.

  In any case - njoy the coding and the sim card

  . H

• Impossible to compile examples of NOR-DAQmx Base 3.4 installation of Red Hat

  By typing 'make' in/usr/local/natinst/nidaqmxbase/examples/I gives the following error: $ make gcc-I /... / include - O2 - lnidaqmxbase o acquireNScans/usr/bin/ld: /usr/local/lib/libnidaqmxbase.so incompatible to jump when you're looking for a lnidaqmxbase - / usr/bin/ld: cannot find lnidaqmxbase - collect2: ld returned 1 exit status is: * [acquireNScans] error 1 it seems that libraries are not compatible with my version of Red Hat/gcc. Are pre-built libraries are built during installation? Don

  In case anyone else has this problem, I managed to solve it by (1) adding - m32 for INDICATORS in the Makefile and (2) by following these instructions:

  «During the generation of the examples, the linker can point out that liblvrtdark.so»
  unresolved symbols in the Standard C++ library.  It is a known issue as the
  NOR-DAQmx Base 3.4 on Red Hat Enterprise Linux WS 4.  For good link and run
  examples, make the following changes to the Makefile.

  Add /usr/local/lib/LabVIEW-2010/patchlib/libstdc++.so.6 to nilibs.
  Add - Wl, - rpath, ' / usr/local/lib/LabVIEW-2010/patchlib "for flags. "since the README file:

  http://FTP.NI.com/support/softlib/multifunction_daq/nidaqmxbase/3.4/Linux/Readme.txt

  Don

• Stuck at "Starting Windows" screen

  I have a Toshiba laptop, Windows 7 Ultimate. I don't have a recovery disk.

  Whenever I start windows, Windows Error Recovery (http://www.techjaws.com/wp-content/uploads/2010/03/win7-error-recovery.png)

  comes with two choices;

  1. run repair system (recommended)

  2 start Windows normally

  Whenever I try to pick 2, it gets stuck on the Windows splash screen

  (http://www.windows7password.net/wp-content/uploads/2010/07/safemodewindows71_thumb.jpg)
  So I chose 1. He lead me here
  (http://www.fanhow.com/images/thumb/f/fb/Boot_to_Windows_7_System_Recovery_Options_5.png/540px-Boot_to_Windows_7_System_Recovery_Options_5.png)
  I first tried to command prompt, then I typed "chkdsk c: /f/r". It took 3 days already. The last time I saw him, it was already (sorry I don't remember)
  «67 000 + 300 000 files (stage 4 of 5)»
  I left for a while, then when I came back, he was already set to zero. I don't think its been already because it is too long...
  After the reboot, it again displays the Windows Error Recovery screen.
  Then I tried the Windows Memory Diagnostic. Everything went well. The status is always "no problems have been detected yet" until it has finished.
  It always shows the recovery screen.
  I tried the system restore. I chose the last restore point. When I click next it freezes and its stuck in there for a long time.
  Then, I tried System Image recovery, but I don't have any image system backed up.
  Finally, I tried startup repair, it took too long so I cancelled it. I thought it might be like the chkdsk which took too much time, but does not solve the problem.
  I tried the Advanced Startup Options (http://ww2.justanswer.com/uploads/operab/2010-05-17_070306_Advanced_Boot_Options.jpg), then I tried the 3 Security Modes. It did not work. It was just stuck to this - > http://www.administrator.de/images/content/f1a9ac1584b0c371c0381bfaadbbf49f.jpg
  I tried to enable boot logging, enable video low resolution (640 x 480), last (Advanced) well-known Configuratio, Directory Mode, disable automatic restart on system failure and disable Signature enforcement and everything lead to screen "starting Windows"... Help, please

  Hi.As you can see you maybe corrupted/not identified/no valid/not found important windows files or modules. You need a Windows 7 Ultimate CD or recovery disk to fix this... You do not have any of these so I don't know if there is a hope for you. I recommend that you run the Startup Repair tool and leave it until the end. Startup Repair is ___NOT of BEING CONFUSED___ with chkdsk. Startup Repair will fix ALL your problems start (for example your stuck at windows startup). Try it and get back with the results.

  Pending.

• Unable to load the file on Tablet Simulator bar

  Hello

  I have the latest JDK and JRE and the simulator of tablet running on the VM player. The development mode is on and I have the IP address. I managed to compile the example sketch program, and it generated a file bar. But when I get home

  BlackBerry-deploy - password xx - installApp-device 192.168.52.128 - package bin\sketchPadStandard.bar

  It says install...

  then,

  result::faliure.

  don't give all the details. Any ideas as to why this is happening?

  Hello

  It was with the release of Simulator.downloaded the new version (beta 2), and it worked.

  Oh and another thing, I tried to create a virtual machine with a 2 GB hard drive and it wouldn't boot (the old version did somehow). When I increased the size of the HD fine tho.

• can not find the option to search my country only - was available on older versions

  I was able to change the location of the research in South Africa only in previous versions. Y at - it an option that I am missing or it is no longer available?
  It's under 'Search tools' before.
  Thank you for this
  Bruno

  Go to this site:
  http://ready.to/search/en/

  In a new tab, go to the page of specific research in the country. In this example I'll use Google ( http://www.google.co.uk ) UK, but replace all what you need.

  In the search box type in:
  ABCD
  And perform a search.

  Now take a note of the URL of search. in my case, the URL is
  https://www.Google.co.UK/?gws_rd=SSL#safe=off & q = CALL

  copy/paste-all before (but not including) "abcd" in the box marked
  the front of the search term: Url-template (prefix)
  In my case would be: https://www.google.co.uk/?gws_rd=ssl#safe=off & q =
  If something appears after as "abcd" (it is not in my example) that stuck in the box marked
  the back of the search term: Url-template (suffix)
  Otherwise leave blank.
  In the box
  the name of the search: ShortName
  Type what you want to call the search provider, in my case it is "Google UK" but put everything what you like.

  Now click on the 'Make the Plugin' button, the button should change to "Modify the Plugin" do not click on this, as there must be a link called
  OpenSearch Plugin < someone ' u called >
  Click on that. Firefox will ask you to confirm the addition of the search plugin. Check to make the default plugin and click 'Add '.

  That should do it.

• I have 2 recycling bins! but I want one that is full, but when I check the Recycle Bin I get the vacuum on my English top, please help!

  What to do if you have 1 trash that is full and you want to access if you do exactly what you say, but rather an another basket appears and goes on your desktop, instead of all that you want. How can I get one complete coming out not the void?

  you don't understand what I'm asking, I'm not ignorant, I know how to work a basket. My situation is not something as simple as that

  Buna,

  Discover through this please your bin

  The Recycle Bin icon does not automatically update in Windows Vista or Windows XP

  http://support.Microsoft.com/kb/968873

  And also read this location one

  How to fix icon not refreshing when Recycle Bin emptied

  EXAMPLE: Basket stuck at full or empty

  http://www.Vistax64.com/tutorials/66294-Recycle-Bin.html

  The revedere

• Tutorials for beginners

  I'm new to the development of BlackBerry applications. Have developed for Android and Windows Phone so far, but I'm helpless on BlackBerry.

  Tutorials that I could follow to get my started instantly?

  Thanks in advance!

  Welcome aboard!

  I would start by checking our Web site, there is a great start-up guide out there and even a sample application.  https://developer.BlackBerry.com/HTML5/documentation/what_is_a_webworks_app_1845471_11.html

  Once get you to know better, you might also take a look at our application on GitHub, https://github.com/blackberry/BB10-WebWorks-Samples and https://github.com/blackberry/WebWorks-Samples examples

• Beginning with BBM

  Hi guys, I am completely new to the Blackberry development and I am now trying to understand works on the last BB10 BBM. I looked through a lot of documentation (webcasts as well) and I noticed that you can do impressive things. A first attempt, I began to focus on a simple task such as the sharing of a link inside my application with peers BBM, but I ran into a couple of issues/concerns.

  My reference SDK is Webworks and, as far as I understand it, the first step is to register the app in the platform... Unfortunately, as soon as it happens, the app will slow down showing the spinner. The code that I have implemented is exactly the same, you can find in the API in Webworks documentation examples:

  https://developer.BlackBerry.com/HTML5/APIs/BlackBerry.BBM.platform.html

  Another point is that I could not find a hook to the API that allows a user to share a link with his contacts, as my original design was designed...

  I am tryng to achieve something which is not provided? What is really when you call "shareContent" as described here: https://developer.blackberry.com/html5/apis/blackberry.bbm.platform.users.html#.shareContent

  ??

  Thank you very much for your time

  See you soon

  -marco

  What behavior you see when you open the customer of the BBM itself say?  Here is a link to a sample of BBM SP for WebWorks.

  Note that you don't have to register first if you use any of the API BBM SP.  However, if you use the framework of the call to call the BBM Client, import into your application as a card that you don't have to register.

  10 BlackBerry BBM SP Sample WebWorks

• Blue light next to the PSC 2400 cartridge

  I wonder because I can't find anywhere in the documentation.

  I have a PSC 2400 (no network capabilities).

  Next to the cartridge is a little blue light which is still active. You can see it on paper when it prints, and you can even see when opening the printer (for example, paper, stuck or when replacing the cartridges).

  I wonder what 'blue' light is... Why is that?

  It is inside the printer, next to the cartridge and moves with the cartridge. It is not an indicator of some sort.

  Thank you!

  It's an old printer, but that the light operates as a sensor. Function of the printer, it helps with the process of alignment and remote sensing possibly different types of media/paper.

• BUG: selectAll does not work after requestFocus

  Not something huge, but a bit boring.
  
  I have a form that, when the window appears, don't requestFocus() on a specific TextField, then on the textfield selectAll so that the user can immediately start typing. (I tried also to do the reverse, followed requestFocus() selectAll). No matter what the selectAll seems to fail and the result are the cursor flashing at the end of the textfield object.

  Have you tried wrapping selectAll in site after requestFocus?

  To get help sooner, post an NBS (Short, stand-alone, executable and Compilable) example that illustrates the problem.

  DB

• where can I find is flashx.textLayout.ui. *?

  I'm trying to compile examples of TLF, including TextLayoutEditorCanvas complains.

  	xmlns:textEditBar = "textEditBar.*".
  	xmlns:txui = "flashx. "TextLayout.UI.."
  	xmlns:txrulers = "flashx. "TextLayout.UI.Rulers.."
  	xmlns:txinsp = "flashx. "TextLayout.UI.Inspectors.."

  I use Flex 4.5.1

  He patched with the latest SWC on the sourceforge SVN
  The last examples of TLF on the sourceforge SVN and they cannot find anywhere.

  What should I do? It makes me batty.

  Are you looking for samples\flex\textLayout_editBar and samples\flex\textLayout_ui in samples.zip?

• JTable with custom column model and model table does not display the table header

  Hello
  
  I create a JTable with a custom table model and a custom column template. However the table header is not displayed (Yes, it's in a get). I have narrowed the problem down in one compilable example:
  
  Thanks for your help.
  

  import javax.swing.*;
  import javax.swing.table.*;
  
  public class Test1 extends JFrame
  {
       public static void main(String args[])
       {
            JTable table;
            TableColumnModel colModel=createTestColumnModel();
            TestTableModel tableModel=new TestTableModel();
            Test1 frame=new Test1();
  
            table=new JTable(tableModel, colModel);
            frame.getContentPane().add(new JScrollPane(table));
  
            frame.setSize(200,200);
            frame.setVisible(true);
       }
  
       private static DefaultTableColumnModel createTestColumnModel()
       {
            DefaultTableColumnModel columnModel=new DefaultTableColumnModel();
            columnModel.addColumn(new TableColumn(0));
  
            return columnModel;
       }
  
       static class TestTableModel extends AbstractTableModel
       {
            public int getColumnCount()
            {
                 return 1;
            }
  
            public Class<?> getColumnClass(int columnIndex)
            {
                 return String.class;
            }
  
            public String getColumnName(int column)
            {
                 return "col";
            }
  
            public int getRowCount()
            {
                 return 1;
            }
  
            public Object getValueAt(int row, int col)
            {
                 return "test";
            }
  
            public void setValueAt(Object aValue, int rowIndex, int columnIndex)
            {
            }
       }
  }

  Published by: 802416 on October 14, 2010 04:29
  added

  See http://download.oracle.com/javase/6/docs/api/javax/swing/table/TableColumn.html#setHeaderValue (java.lang.Object)
  When the TableColumn is created, the default headerValue is null
  So the header ends up rendered empty label (probably of size 0 if the JTable calculates its size of header based on the size of the default rendering tool).

  It worked:

       private static DefaultTableColumnModel createTestColumnModel()
       {
            DefaultTableColumnModel columnModel=new DefaultTableColumnModel();
                  TableColumn col = new TableColumn(0);
                  col.setHeaderValue("Header Title");
            columnModel.addColumn(col);
                  return columnModel;
       }
  

  Published by: jduprez on October 14, 2010 14:09
  Beaten by a fraction of a second!

  Published by: jduprez on October 14, 2010 14:10
  OK, by a split of 17 minutes, specifically: o)

• Help with PDWordGetNthQuad?

  Hello, I am very new to the Adobe PDF Library please bare with me.  I try to extract the text from a PDF file (possibly several column) and output in the form of sentences correctly formatted using C/C++.

  So far, I was able to understand how to use WordFinder to produce the words individually on the screen, but I'm sure I need to access the coordinates of the words to be able to format the output correctly.  I think that PDWordGetNthQuad is what I'm looking for, but I can't seem to understand how to use this function.  I don't know what the pointer of the quad is in the method signature:

  ASBool PDWordGetNthQuad (PDWord Word, ASInt16 n, ASFixedQuad * quad)

  is the pointer that I convey in it is supposed to point to the NthQuad if the method returns true.

  ASFixedQuad *quad;

  If(PDWordGetNthQuad(pdWord, 0, &quad)){
        puts("works");
}

  It compiles, but seems stuck inside the if statement for some reason any...

  Can someone please help?

  You set your ASFixedQuad variable incorrectly.  The method expects a pointer.  You are defined as a pointer and then using the & operator to pass by value.  You must define it without a pointer and then pass by reference.

• Module e/s NI 5761 clock compiled 0 to 100 MHz in single/multiple Sample CLIP examples of projects

  Hello

  I was trying to wrap my head around the CLIP sample NI 5761 Multi (v4.1.0) because the CLIP provides 250 PSM data, but the IO module requires a clock of 200 MHz.  I think, ' NOR should handle the conversion of the clock, fine, but I hope that the diagram is running at 125 MHz... otherwise I'm really confused "so I look at configuring the clock Module e/s in 0 \examples\FlexRIO\IO Modules\NI 5761\NI Getting Started\NI 5761 5761 - to Started.lvproj and to my surprise, it is compiled for 100 MHz.

  I checked the target 7965 in NI 5761 single sample CLIP\NI 5761 - unique CLIP.lvproj and IO Module clock 0 sample was compiled for 100 MHz there as well.

  I do not understand the difference between the flow of data and the selection of clock 200 MHz IO module, and it would be nice to understand it, but not necessary.  Also, I don't understand the difference between data rate and the configuration of the Module e/s 0 clock that drives the SCTL that contains the node IO.  I understand that to move forward.

  Thanks for any help,

  Steve K

  The CLK200 in the selections of the clock is used to excite the parts of the fixed logic that are internal to the CLIP. Some CLIPs FlexRIO may only require a CLK40, this one requires a CLK40 and fixed a CLK200 to properly perform its logic. Thus, it seems that everything is ok in regards to that.

  Unfortunately, the example incorrectly uses IOModClock0. The SCTL AI IO node resides in should use a resource of the clock that says "Data Clock. We've updated the examples in more recent versions of the pilot, but you seem to be using a version of the driver where a CLIP that uses the clock of data is the latest available for the 5761 CLIP, but the example has not yet been udpated to use.