Weird loading bug

I'm on 5.0.1 and I meet a few bugs on this current version, the first is the problem of the consumption of RAM (something you all know) and the other happens when Im loading when my phone is off, but every time I do the screen goes out after it starts the charging process.

You sideloaded a generation that is not official - so that we can not really help you or your problems until you get the final software and it's official.

That's the danger of loading the software that is not sent to your Motorola phone. We can help only if you run the software pushed to your phone OTA from Motorola. Sideloading something you get from someone else is not acceptable.

Tags: Motorola Phones

Similar Questions

Satellite L450D - weird load and power question

Hello

I myself L450D that plays up a little bit. The main problem with it is that it can not be activated in without the battery being inserted. Once you make this portable tension each time. Without the battery it just flashes power after light spin a fan for a fraction of a second and do nothing else.

Most of the time, when you turn it on it will start fine but is the ' power on ' off and battery light blinks slowly (light orange). I know battery is not charging and windows says its loading in-is not clogged. After a few tries (remove and insert the back stack) when I he turned on the light "power we" and battery started to load correctly. I have the battery fully charged and it takes 2 hours (watching a movie until his real).
The "connected" light is whenever I plug the charger.

The questions are:
-why he used to power up without the battery?
-Why is not turned on on the light and reloads do not even if the laptop works well under windows?

I tried pressing the power button for 30 seconds, with or without the battery and adapter, no luck. What is a BIOS problem? I also tried the RAM and the HARD drive in different portable, works ok.

Also once the laptop is powered on it can go on for hours with no problems. I insist on proven components and without defects found

Hope you can understand my ramblings, please give me a hint if you know which continues, dan

In my opinion, you need professional help with this. On this virtual path, we can only speculate what the problem is. To me, it seems that the electronic power supply problem. I put t know what else can be responsible for this, BIOS, certainly not.

Contact the nearest Toshiba service provider to check the electronic card. They will be able to give you answers to your questions.

M7 k111dx: supposed weird graphics bug after update to windows 10

I upgraded to Win10 on day 1 and thought that everything was ok. Then I closed my computer and made after the drive hard light off, the power lights could not do the same thing. I had to make a "force stop" making them to extinguish. Windows don't think I did a force stop. I'm not sure what is the cause, but I would be really nice to fix. "Sleep" mode is also affected by this. "Sleep" mode is more annoying to get out of because it requires a judgment of strength to wake the computer. Windows recognizes it as such. One interesting thing I found out is that if I press volume up and volume down at the same time, the screen goes black for a second and then turns back on. It is followed by a beep. Since my laptop has a geforce 840 m in addition to the integrated graphics, I think that I spend between 2. It is of relavent because only the settings makes the light off when sleep and stop. I've updated my integrated and discrete graphics card drivers and it made this bug seems less random. (when I discovered the volume button thing). I have no way of knowing what GPU I use, but it's really important, as force stops really slow down my progress when you work. All accepted solutions.

Hello @ethandrzb,

Welcome to the Forums of HP Support!

I read your post about the question of sleep mode and wanted to help you!

Try to revisit these steps, by community member @DanG82, to see if the problem can be solved. Please post back with the results:

HOW TO SOLVE THE PROBLEMS OF SLEEP/SHUTDOWN
1. Download version 9 or 10 of the Intel Management Engine Interface (MEI) driver.
2. Download the Package of troubleshooting Windows 10 "show or hide updates" (http://download.microsoft.com/download/F/2/2/F22D5FDB-59CD-4275-8C95-1BE17BF70B21/wushowhide.diagcab).
3. Change the Windows Update Services automatic (delayed start) parameter to the manual.
4. Install version 9 or 10 of the Intel Management Engine Interface (MEI) driver. If you receive a warning dialog box about the replacement of a newer version of the software, accept it.
5. Run the Windows 10 Troubleshooting Package 'Show or hide updates' and hide the updates of the Intel Management Engine Interface (MEI) driver. (This will block your system automatically reinstall or display of updates for version 11 of the pilot).
6. Change back the setting of Windows Update Services to manual automatic (delayed start).
7. Restart your computer.
8. Rejoice! You can finally sleep and stop again.
Source: How to solve the problems of upgrading 10 subsequent to Windows on HP laptops

Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek. In addition, by clicking on the Thumbs up below is a great way to say thank you!

Have a great day!

M7-k111dx: weird load behavior

After the Cumulative Update for Windows 10 Version 1511 for x 64 systems (KB3124262), my charge indication is no longer the correct state. I have 2 batteries, one of them, fresh, but when it is full, the light turns white, the other a works very well. All the tips are greatly appreciated.

Hi @ethandrzb,

Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

I stumbled upon your post on the laptop and wanted to help you! I looked in your question on your HP ENVY m7-k111dx Notebook and concerns with the load turns on no longer works correctly. I recommend to restore the default BIOS settings. You could restore the BIOS withthis document by selecting the reload the default BIOS settings. In this way, it will look at the hardware installed on your laptop.

Please let me know how it goes.

You can say thanks for trying to help by clicking on the Thumbs Up below!

Thank you.

Loading bug.

https://docs.Google.com/file/d/0B2z0K-XuUT7KODc3Vk9Xckl5WDA/edit?USP=docslist_api

The bug only occurs when charging.

Website weird loading issue with Chrome, Mozilla Firefox and Opera.

Hello
I really need help with the following question;
I made a Web site in Adobe Muse, it has exported to HTML, and now I am facing a strange thing at the opening of the site. The site works fine on Safari and IE but when I go on my website using Chrome, Mozilla Firefox, or Opera, the page sort of "load" (not the content), then disappears and entirely. This occurs on all pages.
Here is the link to my Web site: (open in Chrome, Mozilla Firefox or Opera to see number)
www.hetmuziekpand.nl
I tested it on Mobile, Tablet and desktop computer (using different browsers), and for the time being this issue seems to happen on the desktop.
If someone could help me out, that would be great!
Thanks in advance.
Paul

Hi Paul,.

Please refer to the same post is strange workloads using Chrome, Mozilla Firefox and Opera Web site.

Thank you

Prabhakar Kumar

Charger of the vehicle, loading bug (reproducible)

Palm pre load does not work in the following situation:

1. get in the car and enter a destination

2. ... Conduct and following the directions...

3. stop at a gas station (unplug the phone from the charger of char)

4 back in the car

5. reconnect the charger

6. loading does not work.

How to re-enable the load? Unplug the charger, stop the navigation program to Palm standby (lock screen), plug charger, wait a few seconds, start browsing...

Thanks, Sapag

Kind regards.

This issue has been resolved with the 1.3.1 update!

Weird form bug

So, I had to imitate a lower 3rd fact in After Effects in motion. The anim section draws an outline of a rounded rectangle that then fills in the color and text of bottom-3e. The result looks like this:

The animation of contour must start and end at the bottom right, above the curve of the angle and counterclockwise travel. For example, halfway through the anim - on (and with the filling and the hidden text) sketching would look like this:

To create this particular movement direction (and having the movement starts after the curved corner) I had to change the location of the individual points of the geometry, as they ran to the left (point 1 at the bottom right, point 2, top-right, point 3 above left and point 4 below left) and then animate the offset of end of the sketch. (Running the coordinates in a clockwise direction and animating the means of starting starting by the line offset before the corner rounded rectangle, which is not what I'm after).

So far so good, it works very well on the move, so I publish on FCPX, where it is not working properly - the outline emerges to the right left down instead of needles. Huh? When I then re-open the file motion, I find that the positions of the different points of the shape has been changed so that they are executed in the order in a clockwise direction (mainly point 2 and point 4 being traded). Then FCPX follow the instructions in the request file, but movement is reversing my explicit instructions in order to force a form of flow to the left. Why Motion care same order in which the points are in? Surely, he must just accept the coordinates given and work with them.

I found a bodge pick me up around him, but it would be better to know if there is a way to get the proposal to accept a shape counterclockwise.

How do you describe the shape? A behavior using write on? If so, leave to its default settings and rotate the shape 180 ° - 180 °, X-Z. That it will turn around (and it will not change how it is positioned). To set the bottom the right starting point (just above), convert them into Points (type Option-SHIFT-S or menu object > convert point or right click and select converted to Points on the shortcut menu.) Once converted, right click on bottom right corner, and then select: start of game. The animation will start just above the curve.

The problem with 'points' rectangles (and circles) is that once converted, it is impossible to maintain a curl even if you change the dimensions of the shape. If you can live with that, dating back to the 'old' point system is not a big deal. You can add points any part of a shape and choose a moment as a starting point for writing on the animation (or simply keyframe start and end Point offsets in the form > hierarchical Inspector.)

pages aren't loading right and can't find answer in atricles.

For 2 days, all the sites I want to normally are weird loading. Things are piled on top of each other, things disappear, things which are not stacked with each other is in blocks rather than images, icons, etc... and I have to reload all the time your most beautiful smile a lot as soon as I bring up any page on any site. It becomes tiring and frustrating. I tried and tried to fix it and I don't have a chance. I clicked on all the default restore settings that I can find and it is just to not do. I really want to get rid of the cause of Firefox for me it's the only thing I trust but honestly I think about it. Help, please!

The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
Note: This will make you lose all the Extensions, open Web sites and preferences.

To reset Firefox, perform the following steps:
1. Go to Firefox > help > troubleshooting information.
2. Click on the button 'Reset Firefox'.
3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
4. Firefox opens with all the default settings applied.
Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

This solve your problems? Please report to us!

Comparison of JavaScript bug

So I found a weird Javascript bug and was hoping someone could help me.

If say

var value = 40;

var smallervalue = 8;

If (value<>

doSomething;

}

It always seems to work for some reason any even if 40 is > 8. This bug seems javascript is compared only the first digit of the report number to the integer value of the number. I m also using a 'table' for the value for the 'small' in my actual code. Could someone help me debug this? Thank you very much!

I'll take a hypothesis that you end up with a string comparison. One of the sillier confusions of JS. Anyway try

If (+ value< +smallervalue).="">

Analytics.js DW 2015 still loads Slow When Google Tracking Code in the file

I thought that this frustrating bug slipped with the release of 2015?
subhadeep_banerjee last October pointed me they could reproduce the bug I had sent and I assumed that DW would charge quickly, because he did before the 20141 with the analytics.js script in a file. I've just updated until 2015, a HTML file with, as any would file, the script in the file analytics.js and I waited a good one or two minutes for the file to load.
I'm running split vertical (live code to the left to the right). Am I missing something? Why is it slow load bug always around here?
It's really unproductive situation.
Delphine noticed in my previous thread on this bug at MayrBlight on February 26, 2015 the following:
Hello Mary,.
The bug because of slow loading with script Google Analytics (3843167) has been fixed in their own country, and will be part of the next version.
-Christophe
Any new information would be appreciated.

Hello

Sorry to hear that you are still having this problem. I would like to remind that the bug has been fixed in the latest version. (3843167)

We did some optimization on loading script such as second time to the same script will take time.

The current page with the script load time, is similar to what you see on Google Chrome as well.

-Christophe

Problem graphic refresh with multiple locations

Scenario:
Draw two waveforms periodically to a chart (FMEM table for each iteration). Use the scope mode or scanning. Band mode seems to work a little better.

Questions:
* If a plot in a wfm-array is empty for an update, another plot will not redraw properly. It will redraw when the second parcel was given, but the first plot will be badly drawn parts data points will be absent.

* Scan mode leave many red lines and erase some data that's in the way.

Please take a look at the VI attached to see the (dare I call it bug) in action. If you have any ideas, please share.

I managed to find a partial solution to this problem, but the behavior seems weird and bug - like sweep mode always looks very bad.

Background:
I wanted to use graphics to create the best way to display the data, since I need to display several plots with high frequencies was updated, but the variable sampling rates. Before tracing data, it is already decimated so I only to draw as many points as I have available pixels.

Solutions of circumvention attempts:
* ForceRedraw: Do nothing. I use it wrong?

* Reporter FP: Does nothing.

To remove the empty FMEM at the end of the array of wfm (for an update/iteration):
-draws first properly draw
-don't pull on the second plot line
-If the window is resized, the data is deleted, only the last part of the plot is visible. Looks like previous plot data are "forgotten".
-Automatic scale will not work. It will be autoscales on the final section of data.

* Increase the length of history: does nothing.

* Put a flag in front of the chart: live to be redraw until the window is resized. Update graph becomes very slow. The X-scale will go berserk. I used that thing once on an indicator of flickering text and placed an invisible object in front of it, which has contributed to this situation.

* Resize the window: works! Not a very practical solution. Scan even seems ok.

* Use XY-graph: my goal was to make the most efficient way to display data with relatively high update rates. I used a XY, but when I got a little bit of these graphs, the cpu load was very high and I checked it was the actual writing to the graphical indicator that took all the cpu. I tried the update less often and I already decimated data before sending it to the curve, but the cpu was still too high. Replace with the graphic work like a miracle with almost no cpu load

* If a wfm is empty for an iteration, draw the last trace point once again, but with a very small time-offset positive (I think it didn't work well plot with new): graph redraws ok in reach mode but not in scan mode. But if I draw again and again this last point, the other plot will finally cause the x-scale to autoset and I will need to keep track of the scale and not re - plot this point only if it is out of scale-x. It starts to get difficult here and I have not solved all the problems that may arise here yet, but it is of the workaround I use now. And for the graphics, I did find a way to disable this automatic update of the scale (is there a way?).

I did and VI test to test these issues (attached), where the different workarounds may be tested by activating different buttons. Run it just in the default to run without active workarounds and it should show the issue of discounting very clearly. I tested it on 2 PC and LabVIEW 2013, 2012, 2010 and 8.6.

This has been touted as the CAR 455443.

Kind regards

Jeff Peacock

Product Support Engineer | LabVIEW R & D | National Instruments

Re-use of content of charger

Hello
I ran into something that I find very, very weird. Adjacent to the level of the weird, same bug.
I load a GIF with a charger. No fuss there.
I then try to instantiate two different bitmaps with the loaded content:
Image = Bitmap (loader.content);
Image2 = Bitmap (loader.content);
I then place them outside on the stage so I can see both:
image.x = 50;
Image2.x = 200;
Finally, I add the bitmaps to the scene:
addChild (image);
addChild (image2);
But only one of them turns - according to the order in which I attribute the x values. The bitmap that I attribute to the first, is that which renders the scene.
Very strange to me, since I'm must have two separate images after the first two lines.
When I look at the values, it is as if there is a single object on the scene, yet debugging information suggest that there are actually two objects, both referencing the same bit of memory for the image.
trace (image.x);
trace (image2.x);
trace (stage.numChildren);
The performance of these tracks:
200
200
1
Can someone explain this behavior to me? How can I force him to make a real copy of the content, not only the reference memory I think is going on here?
I really prefer is not to load the gif for each new instance.

It's quite interesting. all the languages I know use pointers.

Oh, well, live and learn. So much for the info.

in any case, the draw() method creates a copy of bitmapdata from where you can create a bitmap image. You can use the function copyF() below to make copies of displayobjects. for example to make 50 copies of loaded content, use:

var ldr:Loader = new Loader();

ldr.contentLoaderInfo.addEventListener (Event.COMPLETE, f);
LDR. Load (new URLRequest ("whatever"));

function f (e: Event) {}

Create a function to do something with the copies stored in the returned array.
dowhateverF (copyF(e.currentTarget.loader.content,50));
}

function copyF(dObj:DisplayObject,n:uint):Array {}
var a: Array = [];
for (var i: uint = 0; i<>
var bmpd:BitmapData = new BitmapData(dObj.width,dObj.height,true,0x000000ff);
bmpd. Draw (dObj);
var bmp:Bitmap = new Bitmap (bmpd);
addChild (bmp);
a.push (BMP);
}
return a;
}

How can I solve the unpredictable minimization of windows behavior in executable?

Hello world

I'm having a problem with the size of the window in executable versions of my program. I tested my executable in XP (which is not the development environment) and win7 (which has the development environment), and for me the façade appears correctly. It keeps the size and dimensions I've specified in vi and maximizes the as you would expect.

When my employer test program on its own systems of win7 and xp, however, it gets a strange behavior. The front panel displays much smaller than specified, such that there use the scroll bars to see all the features. When he tries to optimize, maximizes the gray background, but the front does not. In other words, scroll bars remain in the same exact spot, and he sees no more of the façade when the vi charge first, as it has always scroll to see all the features.

I thought it was just a weird generation bug, but it turns out that this has been a problem all the time I sent him built (a few months), so just reconstruction will not help. I can not reproduce the error, which makes it really hard for me to fix it.

Any ideas?

Thank you

Alex

In turn we just had a miscommunication - it is not really a problem!

Thanks and sorry about that,.

Alex

Dell 8 Pro venue does not charge

Hi it is a little disappointed with this product also excellent due to a problem loading of all the things to have a problem with. Received my 64 GB on Friday - widely used device over the weekend, do the installation of the latest updates to drivers, bios, and windows. Bought apps, installed some stuff on my card SD etc, had a lot of fun. Now this morning when I plugged it in to charge the little white light does not illuminate and the unit will not charge. Have you tried swapping the cable on the other hand, another charger (maximum up to now only been using the charger from Dell and the cable) all to nothing does not. The charger works - it will gladly charge other devices. Something is wrong with the unit. Worse, it looks like I'm not the only one. http://en.community.Dell.com/support-forums/mobile-devices/f/4586/t/19531607.aspx - I tried all the suggestions in this thread. http://www.aidanfinn.com/?p=15719 normally buy us Lenovo, it's my first Dell machine. Very disappointed. Request a replacement from B & H unit - they are very good. I hope that the replacement is better.

I found that the only solution was to throw my Dell coming Pro 8 into the trash.

Now that I have this cheap formerly piece of junk autour, I don't have to worry about whether it will work, does not work. Fee, no load, etc.

It was the first product of Dell, I bought for many years and because it was so terrible and get it replaced 2 times does not solve the problems AND Support Dell could not help me, because the Microsoft Store where I bought it would not consider return (I paid $289,99 for the dam thing) I decided it would be my last purchase from Dell.

I also sent an email to my friends and family telling them to refer to any brand BUT Dell for holiday - and if they buy a Dell product, GET a 3rd PARTY WARRANTY!

It is a Dell / question Intel from the place of Dell 7 running Intel and Android has the same problems of accurate pricing - excuse me, load BUG.

Weird loading bug

Similar Questions

Maybe you are looking for