Weird question: problem of color...

Similar Questions

• WebView weird display problem (of colored rectangles) - Debug Mode

  Hello

  I had a problem with a JavaFX Webview.

  Everything loads fine, but each element in the DOM of the page (including the body) is overlaid with a rectangle of color random when hovered.

  After a few seconds the entire page is makes it unreadable and only a weird mix of colors.

  It works without problem in the whole of JavaFX example, so I think that it is not a problem of javafx, but I am doing something wrong somewhere else in my application.

  The initialization code is the same as in the example:

  webview = new WebView();
  previewStage.getChildren().add(webview);
  
  final WebEngine webEngine = webview.getEngine();
  webEngine.load("http://www.google.de");
  
  

  Thought it might be a problem of style sheet, but I removed all the style sheets and it looks always the same.

  I have attached some pictures of what it looks like.

  http://www.tinyuploads.com/images/31lf1b.PNG

  http://www.tinyuploads.com/images/UxK8wZ.PNG

  I appreciate all help.

  Thank you!

  It is https://javafx-jira.kenai.com/browse/RT-23846. Please make sure that you do not enable fine for the com.sun.javafx.webkit.prism.WCGraphicsPrismContext class.

• Correction of the problems of color variation (CS6)

  Hey people - pro photog. Here I used CS6 for Mac to edit my images.  Problem is this: the colors look when open in CS6, but when I view on a web browser (Chrome, Firefox, etc.), more often than otherwise, they find themselves looking for dish, deaf and dumb. Sort of desaturated, to a certain extent. Wondering how to fix this?  What is a color profile settings problem?  (The inherent profile for all of my images is Adobe RGB 1998.). Any advice on how to maintain the authenticity of online color would be great.  Thank you!

  (Either way, when I view my pictures on my SmugMug site, I don't have seem to have this problem.) SmugMug seems to reproduce the same-color balance I see in Photoshop.)

  Hi jdanielshaffer,

  You have RGB, not CMYK or another color space. It's pretty easy to check, just go to Image > Mode and make sure its RGB value. My guess is that it probably is.

  The second question is a color profile. This can be set to something else. To use sRGB IEC61966 - 2.1, which is considered a standard for most PC monitors. The best way to check is to go in Edition > color settings. If it is set to the 'General purpose of the North America 2' or ' North America Web/Internet ' it should work fine.

  The last step is to configure an installation of 'evidence' that will establish a monitor preview color. Come on in "View > Proof Setup > monitor RGB". Then you can switch power the proof colors using the shortcut (depending on the operating system) for the colors to test, which is located under the toolbar.

  See also: https://viget.com/inspire/the-mysterious-save-for-web-color-shift

  Let us know if that helps.

  Kind regards

  Mohit

• A few questions about the colors of Patone

  I have a few questions about patone color since it is the first time that I use. I want to use them to create a paper letterhead and business cards in two colors.

  1)

  I don't understand that no sex is more than coated patone washed out colors. I heard that it's because the way paper absorbs the inkt. That is why the same results inkt in different colors on different papers (right?). My question is why is the patone black no sex so different than black normal (c = 0 m = 0 y = 0, k = 100) or black intense:

  

  When I print a normal document with cmyk, I can get pretty dark black color. How is it that I can't have this dark with patone color black color? Even text documents printed on a cheap printer can get a darker color than the color of Patone. He looks way too grey for me.

  (2) a first model, I want to print of patone in CMYK color (since I have like 10 different colors on a page of quick comparison). I know these CMYK colors distinguish the colors of patone and I can't get a representation of 100%. But is there a way to convert patone CMYK values?

  I hope some of you can help me with my questions.

  Thank you.

  You can get shades CMYK Pantone in Illustrator, (Swatches Panel > Open Swatch Library > color books > + PANTONE Color Bridge Coated or lying) but in my opinion, what's the point?  If you print to a digital printer, just use RGB (HSB) or CMYK. Personally, I never use CMYK called "equivalents." from Pantone

  Pantone colors are all mixed pigmented inks, which are fluorescent beyond the limits of the range of RGB and CMYK in particular. The original Pantone Matching System (PMS) was created for the printing industry. He described formulations of ink pigmented for each of its colors.

  Most digital printers (laser or inkjet) use CMYK. The range of CMYK is MUCH SMALLER than many mixed inks, printed on papers either paved or unpaved can deliver. When you specify no sex Pantone ink in artificial intelligence, according to Pantone conversion tables, HAVE "about" what will look like this color on a sheet no bed, try using CMYK. -In my opinion, this has little relevance to the real world conditions and should be avoided in most situations.

  If your project must be printed on a press printing with Pantone inks spots, then by all means, use Pantone colors. But don't trust the colors of the screen; rather get a Pantone swatch book and watch real inks on paper lying and uncoated, depending on the stock you will use on the press.

  With printing decreases rapidly for inkjet and web printers, Pantone has attempted to expand its relevance beyond the traction-date of publication (in the books and software alliances, with one such as Adobe) his old PMS inks and their supposed equivalent LAB and CMYK. I say "supposed" because even once, monitors RGB and CMYK inks can never be literally equivalent to many Pantone inks. But if you go to your project on a printing press printing, Pantone inks are still very relevant as of the "tones".

  I also put my preferences I > appearance of black both display all blacks accurately and output all blacks accurately. The only exception to this may be when you print on a digital printer, where there should be no problem checking.

  Rich black in artificial intelligence is a phenomenon of the screen, at least in the Prefs > appearance of Black, you specify also "out all inks like Rich Black"-something I'd do it EVER do so out for a real printing press. Still, I put my black people in artificial intelligence at the "output All Blacks Acurately" during a press release. If you fail to do so, then the press you will see any minor issue registration, with C, M and look at the back, especially around black characters.  UGH!

  Good luck!  :+)

• Major problems of color in CS5-very clean

  HELPPP... and please excuse my ignorance.

  When I got CS5, I had problems with color management.  Don't know how to explain it, but the colors in the different visualization pane significantly after I clicked on the photo to edit. In other words, as soon as I clicked on the photo, I tried to edit, it turned much duller.  the reds suddenly becomes brownish orange. and they are not believed, so this isn't the problem. I finally understood how to work around. Although I shoot in Adobe RGB I set to SRGB color management and (I don't know what else I put) and when I clicked on a photo to edit, I'd get the message where I had the opportunity to reject the (no color management) icc profile and that's what I chose.  It was all my rich colors, and it was worth the hassle to do this with each new picture.  I know you might think it's ridiculous, but I had no problem with the impressions of my laboratory.

  Last night it was fine.  This afternoon I turned on CS5, and everything changed. and I have no idea why.  Now I'm back to see dull colors in CS5, even the one's that I've already edited.  I have some pictures with rich red, they are fine on my site, but in photoshop dull brown.

  I'm temporarily using Corel, because for some reason to any he has no problem to display the correct colors.

  So it is something to do with PS.  I think that somewhere, but I don't know how, maybe some settings changed.  But I'm desperate.  I tried all kinds of combinations. using the setting, switching things on and off and dull, dull, dull to adobe.

  I have windows 7 64 bit

  Thanks for any help you can give.

  Jessie

  

  There, working with unmarked RGB , as you pointed out, charles

  anyone else trying to solve this mystery:

  Photoshop must use (apply) the SOURCE PROFILE appropriate to display properly (it's the first place wherever I look, the monitor profile is the second)

  a screenshot of the color of the OP settings would also be good to make sure all three profiles are defined to Preserve, and all three boxes are checked to warn us other questions:

  

• problem with color efex pro 3 in CS5...

  Hi all

  Sorry for my English

  I have a problem with Color Efex Pro 3, I can not

  If it is usable on my CS5 how do?

  I installed the software in the Photoshop plug-in

  CS5 and nothing

  Help me I am knocked out I finds no solution...

  Thank you all in advance for help you

  We do not control the API - but the code of the plugin runs in our process.

  Plugins are not other applications, they are DLLs with reminders in Photoshop, sharing space with Photoshop.

  If we cannot witn against their bugs with the current plugin architecture.

  If you didn't mind working two orders of magnitude slower with no plugins do not access to as many features of Photoshop, we could put plugins in another process.   Then, of course there are things that we can do - just nothing reasonable, or that visitors and developers would be conditioned with.

  And next time, please do not hesitate to ask questions instead of trying to make a Chair coding.

• Question / problems with the TV Toshiba 40TL938 (40TL938F)

  Hello world
  I bought the Toshiba TV 40TL938 french version (40TL938F), in an online store.

  I have a few question / problem and I hope you could help me.
  -When I play subtitles embedded video MKV files via USB, works well, but for me, they are too small, too thin and too white. I can make them biger, more large and with a black shadow around him? If so, how could I do that?
  -When I play MKV via DLNA (with XBMC) video files, there are no subtitles more. Whose fault is this? My TV? XBMC? Do you think, how can I fix?
  -does anyone know if DTS will be supported sooner or later in 2012 toshiba TV models such as my 40TL938

  Thank you very much in advance for your help!
  Backslash
  French user of a beautiful Full HD 3D 40 inch toshiba LED TV :)

  > when I play subtitles embedded video MKV files via USB, works well, but for me, they are too small, too thin and too white. I can make them biger, more large and with a black shadow around him? If so, how could I do that?

  76 user manual page:
  http://www.Toshiba-OM.NET/LCD/PDF/English/TL938-4046-English.PDF
  You will need to check the option: + Subtitle + type

  > when I play MKV via DLNA (with XBMC) video files, there is no subtitles more. Whose fault is this? My TV? XBMC? Do you think, how can I fix?
  I guess this isn't taken in charge by using DLNA

  > does anyone know if DTS will be supported sooner or later in 2012 toshiba TV models such as my 40TL938
  I have found no information about the DTS :(

• J4580 print cartridge problem: [Tri-Color] refer to the device Documentation

  Well, I'm starting to feel like I knew better, buy another HP printer after dismal luck with two all-in-one before.

  My J4580 already gives me headaches after only 6 or more months of use.

  The unit refuses to print, declaring "print cartridge problem: [Tri-Color] refer to device Documentation to troubleshoot."  Nothing in the help documentation.  The Habs is always 90% full.  Sometimes pulling the Habs and placing back in crazy wil it restarting.  When it restarts, it prints perfectly.

  I tried the ubiquitous "clean the contacts" and other instructions help generic that I saw, but those who were without help.  The "Solution Center (Yes, good)" appears and all ithas is a link to buy more ink (!).

  Someone has an idea?  I'm about to throw it through the window of stores office, given that I can't throw it out the window of HP.

  Thank you!

  Yes * I know * and I'm sorry that I forgot to come back here.  I had a major system crash and I had to reinstall a lot of drivers for my multimedia player, GPS, and printer (!).  As this occurs, the device did not return this error - touch wood.

• Problem with colors in Lightroom (color shadows/blacks/artifacts)

  Hi, I imported just some pictures with dark places on them (shadows, night etc.)

  and in the library colors are ok, but once I'm in develop module, change the scenes dark colors and there are even darker splashes (?)

  Its ok when I click on ever but its annoying, but if I uncheck the box, dark colors are back.

  So:

  Library - ok

  Soft proofing - ok

  When I export - ok

  develop - bad spots on the part dark photos

  Photo:

  Objects on dress in develop module:

  

  And that's what it looks like in library, soft proofing and export

  

  Another example:

  http://imgur.com/a/EOtbM The first picture is developing, rest is library and never. You can see black spots on his black shirt plate and TV

  It happens with every photo, regardless of if its from my camera olympus or iPhone.

  IM using macbook air 13, all set to date.

  Thank you!

  Is that what you see? I used an adjustment layer to make it visible.

  

  These artifacts are actually in the file. I noticed metadata in the file that you are using Lightroom 5.6. You need to update it to Lightroom 5.7.1 there was a problem of color management with Lightroom 5.6 under Mac OS X Adobe fixed with 5.7. Which I documented here: Jao photo blog: bug of serious color in Mac OS 10.9 'Francs-shooters' management

  See also here for the official response from Adobe: Lightroom 5: table of ICC profiles clipped shadows under OSX | Community customer Photoshop family

• Problem with colored labels

  Hello

  I'm having some problems with color tags when you use lightroom;

  I recently upgraded to Lightroom from 5.6 to 6.5, and all the photos of my catalog with tags color turns white label only.

  I also have the same problem when I import pictures from my laptop catalog, whith photo colors such as red, blue, green, turns in a white label...

  Is there a problem with LR 6.5?

  Could you help me please?

  Cosette

  I finally found the solution.

  During the upgrade, LR languages have changed, and the words associated with the colors too, labels

  so I translate just the name of the color in the metadata / color label set / change, and everything is fine!

• Color profile question/problem.

  These two products of the same file were taken on D300s my spouse and are good examples of a profile problem, that I can't solve.  It's the same problem, I also have experience on the Nikon D700 and D3.  What follows has been exported with the profile "caméra Standard" and notice the reflection of the Yellow Sun on the door panels:

  

  The following has been exported with a profile of lightroom generated xrite. Notice the overall contrast better, but also horrible unnatural yellow on the same door:

  

  This difference causes all kinds of distortion in natural hair that contains any red-orange.  I use these doors because they are a striking example.  Any attempt to correct through the World Bank generally will result in too much blue elsewhere.  Also, I've created several test profiles in several light conditions (manually and LR), and they all cause this problem in the three cameras.  This isn't a question of a unicameral bad or wrong created the profile.

  I have two questions: this example shows well enough to see what I mean?   If so, is - anyone can speculate as to the problem or the solution?  Even conjecture would be appreciated since I'm out of my country and not an expert in this kind of thing.   Thank you!

  George, this is an extreme lighting situation that allows to create strange colors that are difficult to "rectify". I put that word in quotes because the question is: what were the colors in lookin at the scene with your eyes. Chances are that the strange colors were there, but not entirely seen, because our brain has a built-in mechanism to change the colors of "what they should be."

  So, in other words, I think that you cannot be too critical of a picture taken in these extreme lighting situations.

  I have also seen pictures taken in such circumstances are very difficult to "color setting". You showed us the example of a photo 'red '. But the same is true when you take a photo in extremely "blue" light (a very cloudy and rainy day in shadow).

  I fould that in such situations I've either must live with colors that are not 'right' or I have to resort to adjustmenst of local color in PS.

  WW

• Satellite M115-S1061 - display problem - bad colors

  According to my daughter, his portable Satellite under XP - SP2 suddenly went dim. At first I thought that it would be the backlight inverter, so I got a replacement, but to change that did not make any improvement.

  Experiment with display settings it became apparent that a lot of the display of colors were not what they should have been and I started thinking about something had happened to the LCD screen or its wire causing the loss of one of the primary colors for example: Blue however, after restart I have observed a lot of blue in the diplay up to what fully loaded XP.

  Display themes and by setting to try to get a useable simple, it became more and more obvious that there is some type of ongoing video inversion.

  That said, I can't find any setting that could cause this or any similar report of this disease. I scanned for any viruses and returned only several points without results or imprivement of restoration.

  The driver has not been updated, so it there is no possibility of returning to a previous iteration and are looking for a update indicates the current dirver is the last.

  In addition, as indicated, during the first boot, the screen seems to be relatively normal brightness and colors are properly...
  It is not until the Office XP launch things go astray.

  Any help would be greatly appreciated that the school is in session, and I be get this resolved and getting a new laptop!

  TIA,
  Bob

  Hello

  > Also, as indicated, during the first boot, the screen seems to be relatively normal brightness and colors are properly... It is not until the Office XP launch things go astray.
  From your description, I think that this could be a graphics card problem.

  I would really recommend connecting an external monitor, second to this laptop to check if the same wrong colors would be visible on the external monitor.

  If the same bad colors will appear simultaneously on the second monitor then the question could be really related to a bad GPU chip

  In this case a replacement (motherboard) would be necessary

  Bye & welcome

• Random colors are too dark. Questions on the color boxes

  Hey all,.

  I'm trying to change the color of the plots on a graph of mixed signals remotely using the 'color box' which works very well. However, I'll also put squares of color to a color at random when the program starts first of all which is where my problem lies.

  What I am doing, is that I have a random number generator pumping a number then I multiply the number by 10000000, just to give me some brighter than the dark colors, and then I wired to I'm defining the random color on the color box control. The problem is that even if it does not the decent colors some colors produced are quite dark and difficult to see on the graph of mixed signals.

  I could make the graphic background a different color if I have to in order to see a majority of the colors coming out, but I would rather that have the colors come out on the side that is bright and colorful.

  So I have two questions for you guys and girls:

  1) how the colors of the colorbox get determined using the unsigned int 32?

  Such an example of why I'm confused, is that the number I had is 5726420 from the random number generator (+ multiplies), but under the control of colorbox RGB value is R:87 G:96 B:212. Why is this?

  2) there is any type of algorithm out there that someone did which can produce random values that will give the kind of colors neony? or whatever it is semi bright indeed?

  Any help is very appreciated!

  Ionized

  Use 'RGB color' of three random U8 (o.. 255) values to generate a color. (double click on it to open the VI to understand the structure of the type of color data )

• (Memphis-S) weird motherboard problem

  Hello, guys! I need to change my stock cooler, with another one (mugen 4), but I have a weird problem, I can't remove the back plate. I don't know how to explain it exactly my problem because of my bad English, so I'll add a photo (so the main question is: is it possible to remove the back plate?) (the photo is not of my mobo, but I have the same problem):

  Yes, I saw your picture posted.
  --
  Are you sure that you can not use that existing Memphis-S back as installed metal plate?
  --
  Have you looked AT the photo of the motherboard (Memphis-S) in the HP link provided?
  IF NOT, let me clearly from the comparison and review of the photo.

  

  The back plate is held on the motherboard by the 3 screws of the machine
  (and the nuts on the side of the metal plate) the decision-making LGA1150.

  IF you remove the back plate, the 3 nuts must be put back to their machine screws, without damaging the multilayer motherboard.
  --
  See the SCYTHE Mugen 4, the manufacturer of this thermal CPU / heatsink, for additional advice/recommendations.
  http://www.Scythe-EU.com/en/products/CPU-cooler/Mugen-4.html

  Done SCYTHIAN State (their Support for Mugen 4 page), as for AMD motherboards,
  the metal back plate of origin is required for the installation of the appropriate heat sink.

• HOW TO SORT THE PROBLEM OF COLOR GRAPHICS ON WINDOWS XP

  I have a problem getting the color in the window Xp sp3 using microsoft office by adding any character color and recently I installed Trend Micro antivirus for my computer in which Trend Micro security agent page display no color at all.

  Hello

  ·         Are you facing this problem only with Microsoft Office?

  ·         Are you having similar problem when using Microsoft Paint?

  ·         Do you use the computer laptop or desktop?

  ·         What is the brand and model of the computer?

  ·         Were there recent changes made on the computer before the show?

  Method 1:

  Start the computer in safe mode and check if you are facing a similar question:

  A description of the options to start in Windows XP Mode

  Method 2:

  I suggest you follow the troubleshooting steps form the article and check if it helps.

  Resources for troubleshooting problems in Windows XP