weird startup message

Similar Questions

• Weird startup message "fixed disk:" X 240

  Hello

  Today, I went back to my holiday work, and when I turned on my X 240, I saw this start message:

  http://i.imgur.com/0DDFIZe.jpg

  Then I pressed Enter and it just booted normally. What it means? Is it possible that she has been manipulated?

  Should I worry about this?

  Thank you!

  It is the diagnostic screen that you get, disable boot in the bios then go to the Startup tab and look for the boot if Mode so-called [diagnosis], then replace it with [fast] and then go to restart exit save changes that must disable the diagnostic boot and you should get only thinkpad splash screen and then start windows

• Xperia Z2 startup message

  Hi all

  I encountered this problem (I don't know if I can call it a problem), with my Z2, when I turn it on, then next turn, or when you restart the phone, once it has finished up the boot sequence, it shows me in the middle of the screen a message saying: powerful communications, your messages are changing... and another... and inside text , it makes me enter my phone number with country code... and hit ok... but it looks about 6 times, hit ok for six times before it disappears! Thank you!

  @dbogdan25

  Start safe mode and let us know if you encounter the same startup message

  http://talk.sonymobile.com/T5/FAQ/How-to-boot-your-phone-into-safe-mode/m-p/348008#U348008

  If you do, remove the SIM card and try again.

• I get dll error at startup messages, slow down my computer. Files that cannot be found are buzixu.dll and grfamsg.dll

  Files that cannot be found are buzixu.dll and grfamsg.dll. The operating system is vista.

  Thank you.

  * original title - Hi, I get dll error at startup messages, slow down my computer.  Does anyone have ideas how they could be fixed. Thank you very much.*

  Hello

  Google who provides virtually no information that suggests it might be the malicious program or a start remains for her entry search

  Download update and scan with the free version of malwarebytes anti-malware

  http://www.Malwarebytes.org/MBAM.php

  You can also download and run rkill to stop the process of problem before you download and scan with malwarebytes

  http://www.bleepingcomputer.com/download/anti-virus/rkill

  If it does not remove the problem and or work correctly in normal mode do work above in safe mode with networking

  Windows Vista

  Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

  If the error persists after scanning use this program to out startup

  This utility, Autoruns for Windows, which has a knowledge of auto-starting locations of any startup monitor, shows you what programs configured to run at system startup or login and that the entries in the order of processing windows. These programs include those in your startup folder, Run, RunOnce, and other registry keys. You can configure Autoruns to show other locations, including Explorer shell, toolbar extensions, helper objects to the browser, Winlogon notifications, auto and many start-up services even more.

  http://TechNet.Microsoft.com/en-us/sysinternals/bb963902

• hot to turn off Java after the startup message

  Hello world

  I know it's a bit old, but I couldn't find an answer to it, or maybe I searched the wrong topic. After the reboot, I still get this warning window saying "to use the"java"command line tool, you need to install a JDK.
  I ElCapitan and recommended Java installed since Mavericks version, but the message never goes away. The used warning window is displayed only after restart, but now he appears randomly during normal use of the laptop.

  Please help me to get rid of

  You have software that requires the Java command line tool? It is only in the JDK you will find Oracle's Web site.

  Check your/Library/LauchAgents and /LibraryLaunchDaemons for startup like facebook or similar items. Also, check your user settings (users & groups) under your Log - In for Autostart-software items after the connection.

• P 500 Workstation startup message

  On startup, I get the following message:

  «Wait REG bit timeout, send the information of MTN/SN to eSIO fail»

  Apparently not creat any problem outside of slow start-up time.

  Serial number: XXXXXXXX

  Product number: 30A7CTO1WW

  BIOS: A4KT80AUS

  My firmware is up to date?

  (Mod edit: series removed from public display for your safety)

  Odd. Try to Flash up to the 87A and see if it goes away. http://support.Lenovo.com/us/en/downloads/DS101230

  Let us know your results and we'll go from there if other measures are needed.

• startup message... Windows shut down to avoid damage

  locked system, when the previous stop, had to press the power button / stop... on said boot messages Windows has shut down to prevent damage to the computer, at the bottom of the screen, it says disable the driver and then update driver - says to disable the following driver: kdcom.dll - address F967115E to F9670000 database.  4e408293 datestamp.

  I also tried a restore of the system several times and received the same message at startup.  I will try to disable Norton as noted during my research of the problem and try another restore of the system.

  Here there is a self-diagnostic and repair on windows updates - I don't know what caused the problem, where/what it is; or how to fix it.

  Hi Marty,

  ·         Have you checked the problem in safe mode?

  ·         The computer starts finally on the desktop?

  Method 1: Try to start in last known good Configuration advanced startup options.

  Method 2: If you are able to boot to the desktop, you can update the computer with the latest chipset drivers. Also, update the other drivers for devices such as graphics, sounds etc. Log on the computer manufacturer site to do.

  Reply with the results.

• How can I fix a startup message "msvcr71.dll" in xp home edition?

  Windows XP Home Edition 2002

  The message above showed up after we had followed advice to fix the message "msvcr7.dll".

  Does anyone know how to fix this please?

  Hi StuartCurran,

  1. What are the steps that you have run on the computer to solve the problem?

  2. What is the full error message that you receive?

  It is possible that some third-party programs installed on the computer is causing the problem.

  I suggest that you put the computer in a clean boot state and check if it helps.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

• Change something in msconfig. Get a weird error message.

  Hello. Changed a lot of material internally. Re-installed XP. Have all the updates. SP3.

  When I go to msconfig and stop some programs start at startup, it gives me this message: access denied error was returned while attempting to change a service. You may need to log on using an administrator account to make the specified changes.

  I am an administrator. The only user on the computer. How to stop this message, or others like him? There are a few others like this message I get.

  Thank you.

  You are not the administrator. You are a user who has administrator rights. There are some subtle differences.

  Windows XP safe mode home is basically identical to that of Windows XP Pro, with a couple of notable changes. In Windows XP Home Edition, the built-in "Administrator" account is only available in safe mode and is the default account for this mode. The password of the administrator account is empty, because it is not accessible except in safe mode. It is recommended that you connect as long as this account for changes in safe mode.

  Source:http://www.pcstats.com/articleview.cfm?articleid=1643&page=2

  Making permanent changes using msconfig, although commonly made, goes against best practices. Msconfig is intended to be used as a troubleshooting tool. Autoruns to change startup items.

  To identify what loads when you start using Autoruns (freeware from Microsoft).

  http://www.Microsoft.com/technet/sysinternals/ProcessesAndThreads/Autoruns.mspx

  With Autoruns, you can deselect an item which disables startup, or you can click with the right button on an item, then remove it. If you clear the check box that you can check back for re - activate the element. It is an approach much safer than editing the registry and better than using msconfig.

  Another useful feature of the program is that you can click with the right button on an item and select search online to get information about the selected item.

  Tinkering with the startup type of services is also unwise because it often introduces errors in the operating system for significant benefits. Commonly, users complain that this or that is not working after hours of frustration trying to fix the problem. Do not confuse the benefits of changing the way that loading programs to the development of services.

  Hope this helps, Gerry Cornell

• The startup message: could not find the device implementation of MOM

  At startup I get the implementation of MOM message device is not found

  Hello

  I suggest to try to start the computer in safe mode and check if you can start:

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If not, then I suggest you try to do the Startup Repair and check if this can help:

  http://Windows.Microsoft.com/en-us/Windows-Vista/startup-repair-frequently-asked-questions

  It will be useful.

• startup message box

  When I start my computer the following message "GfxUI has stopped working" can someone help me please

  Have a look here:
  GfxUI has stopped working (at startup)
  http://discussions.VirtualDR.com/showthread.php?t=245089

• Thing Snape blackBerry Smartphones weird SMS message.

  Ok.  After an exhaustive search here I can't find the answer.  This is my problem: I have a rogue SMS message which means this:

  1. it indicates a person in my contact list, but the conversation in the mssage has nothing to do with this person.  It's actually a combination of about 3 different conversations, which is not a person in my contact list.

  2. I try to delete the message and nothing.  It is not in one of the recorded files, it is nowhere to be seen other than in the Messages folder.

  3. I try to delete several messages out of the TEXT Message folder and a window pops up saying "Delete" with a stationary clock, but then it just sits there, nothing happens.  Nothing clears.  I do a hard reset and this window disappears, but the message is still there.

  3. I can delete all messages but this one.

  I tried to use my Hardpull app, nothing.  I removed my Otterbox cover and did a hard pull, nothing.  I looked in all my files message, nothing.

  Any help would be appreciated.

  Sam

  Solved.  Don't know how, I had already done the steps, but now it worked.

  Went into SMS/MMS > BB Btn > sending SMS > BB Btn > Shift, all the messages, BB Btn > Delete Messages? > Remove.

  It seemed to separate all the contacts that have been mixed in a single message, then I was able to remove them.  Weird, but it worked.

  Well.

• Startup message: "No Media".

  Today, I tried to start my G5, and on my screen, there is an icon of a hard disk with a message "no media".

  I hear the ringtone to start and the noise from the hard drive goes, but then nothing.

  I tried resetting the PRAM (Option, command, P, R) and heard the chime twice, but still, "no media".

  The last thing I did before yesterday off the power was back up to an external hard drive.

  Running OSX 10.7.5

  Can not enter in the window "about this Mac" to provide more information, because I can't turn on the thing!

  I looked inside the top drawer but could not find a hole for a paper clip, so I can't try to reboot from the original operating system.

  Tried to contact Apple Support, but they do not recognize my serial number, which is strange for me, unless my Tower is so old that they just do not cover it no more.

  I'm squarely in the "end user" category, so I know what else to try.

  Any help that can be explained in simple terms would be invaluable!

  Carol

  We will understand if you are in the right forum. If you are running OS 10.7, you have a Mac Pro, not a PowerMac G5. If you are unable to "about this Mac", see how many doors in the car you have:

  

  For example, a door or two? Internally, the two models are very different, so go in the appropriate forum will allow you to avoid advice is that may not work on your computer.

  Please let us know what you find and, if necessary, we can ask guests to go on to your question.

  I looked inside the top drawer but could not find a hole for a paper clip, so I can't try to reboot from the original operating system.

  Try to hold down the mouse button while you start. Who can open the door of the car.

• SA40-702 satellite: startup messages

  Hello

  Until recently, I experienced no problem with my satellite SA40-702. However, while starting I started getting the following messages, which appear before the Windows XP best wishes...

  PXE - E61
  Media Test Failure - Check the cable of

  PXE - M0F
  Exit Intel Boot Agent

  While no obvious problems occur while using the machine, its obvious that these messages should not be appearing. Someone had no previous experience of these message?

  Any help/advice gratefully received.

  Concerning

  Peter.

  Hi Peter,.

  The PXE - E61 message ususally indicates the laptop tries to start from a LAN attached rather than the hard drive or the CD source.

  First check the boot order in the BIOS (press and hold F12 for the market) and make sure that your boot order has your hard drive as first or second device in the list before the connection to the local network.

  If it is already defined in this way, then it is likely that your hard drive is corrupt because the system can't find the boot sector (or can't read).

  I presume that you can boot from the CD (since you say that you tried to reinstall XP. Did you use the recovery discs for your laptop or a Microsoft XP disk?

  Kind regards

• I tried a simple snap vi and everything I had, it was a weird error message

  Hello

  so I installed the acquisition of vision, vision Assistant and connected to the camera. And when I run a simple vi snap I get this error message:

  Hello

  so I installed the acquisition of vision, vision Assistant and connected to the camera. And when I run a simple vi snap I get this error message:

  Error - 2147467259 occurred ar IMAQdx Open Camera.avi

  Possible reasons:

  LabVIEW: Unspecified error (Hex 0x80004005).
  =========================
  System OR Configuration: Various operating default (Hex 0x80004005).

  Hello

  so I installed the acquisition of vision, vision Assistant and connected to the camera. And when I run a simple vi snap I get this error message:

  Error - 2147467259 occurred ar IMAQdx Open Camera.avi

  Possible reasons:

  LabVIEW: Unspecified error (Hex 0x80004005).
  =========================
  System OR Configuration: Various operating default (Hex 0x80004005).

  Now when I go to MAX I can see the camera under NOR-IMAQdx devices, but it has a small red circle with a white cross. I went through the help, but I must be missing something because he said that I should do a right-click on the camera and go Driver"digital camera NOR-IMAQdx IIDC. There is no driver when I right click on the camera and I end up getting a different error message say:

  Error 0 x 80004005

  Unknown error code in imgShowError.

  Hello

  so I installed the acquisition of vision, vision Assistant and connected to the camera. And when I run a simple vi snap I get this error message:

  Error - 2147467259 occurred ar IMAQdx Open Camera.avi

  Possible reasons:

  LabVIEW: Unspecified error (Hex 0x80004005).
  =========================
  System OR Configuration: Various operating default (Hex 0x80004005).

  Now when I go to MAX I can see the camera under NOR-IMAQdx devices, but it has a small red circle with a white cross. I went through the help, but I must be missing something because he said that I should do a right-click on the camera and go Driver"digital camera NOR-IMAQdx IIDC. There is no driver when I right click on the camera and I end up getting a different error message say:

  Error 0 x 80004005

  Unknown error code in imgShowError.

  So I had two error messages & I'm sure it's the same problem. He need to apologize that I am kinda new to this more - as most of you are I am self-taught, so I'm still rough around the edges.