'Welcome' continues after I've logged in.

Similar Questions

• keyboard randomly stops working and continues after reloading safari. Running El captain

  wireless keyboard randomly stops working and continues after reloading safari. Captain El running. He did once, using Word as well. On the occasion when his order in safari it works in Word and then stops again.  Y at - it a cache keyboard or something that needs resetting? Any help would be welcome.

  If your USB keyboard or wireless does not work

  Keyboard does not work

  Keyboard/mouse - troubleshooting wireless

  Reset an Apple Bluetooth mouse or Trackpad wireless keyboard (pairings and other common troubleshooting problems)

  Bluetooth devices no longer meet

  Sources of interference Bluetooth

  Sources of interference of Bluetooth (2)

  If your Wi - Fi connection is able to generate a 5 GHz signal, try this.

  Restart your computer, hold down the option/alt - P - R keys command before the gray screen appears. Continue until you hear the startup chime for the second time.

  Reset the NVRAM EXTRA memory

• CAT Alert count displays continuously after considering

  Hello

  I've recently updated the Skype then leave alert County Cat displays continuously after I open the Windows Skype also. It displays until I answer it

  Solution

  Right-click on the recent tab it shows the option "mark all read" and click on it and then count is disappearing

  

• Installed Vista pack 1 as prompted. Tour is continuing after 10 hours. Monitor says no entries, and falls asleep.

  original title: installed Vista pack 1 as prompted.  Tour is continuing after 10 hours.  Monitor says no entries, and falls asleep.  What should I do?

  My desktop computer has said that there was a problem with the window.  He said that Vista pack 1 expired July 12.  I installed it when prompted by August 6.  He began to run at 18:30 and HP Tower ran all night with a blue and orange light flashing.  The monitor was gone to sleep.  When I turned on the screen this morning, he said that he had no entry and time to sleep.  What should I do next?    I just got internet on 28 June, so don't know what that what is happening.  I get updates automatically.  Why it that not update.  I use another computer to communicate with you because I don't know what to do next.

  Spent by the factory with the OS. After 18 + OVERLAYS on my XP Pro PC I've exchanged on this VISTA Premium 32 bit and after 15 + OVERLAYS on this one, IT WORKS finally.

  This experience as Kosh Vorlon said above RESTORATION anyway possible and go directly to Microsoft for Service Pack so I found this to be the best source

  It's the 32-bit version

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=30

  This is the 64-bit version

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=21299

  Now it's been GETTING all THE UPDATES... I found that the PC knows what to do with them, and without any help from us that it just boot process follow all prompts.

  When it's done GET SERVICE PACK 2, SP2 from Microsoft

  It's the 32-bit version

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=17669

  It is for the 64-bit version

  http://www.Microsoft.com/download/en/details.aspx?displaylang=en&ID=17669

  and it goes the same for this time to GET all UPDATES.

  And a my Service Packs note came in the updates of Windows. As well as all updates from the update updates. HP updates are usually for the hardware and drivers.

  Good luck

  RickS

• Windows Vista, it will not move in front of the 'Welcome' screen after you enter the administrator login password.

  After you have installed an in place upgrade to Windows Vista, it will not move beyond the 'Welcome' screen after you enter the administrator login password.  The computer works fine in safe mode with network, however I am unable to boot normally without hang on the screen 'welcome. '

  (the system is running pre - SP1)

  Hello

  Start the computer to boot in safe mode with network and check if it helps: How to troubleshoot a problem by performing a clean Windows Vista or Windows 7 boot http://support.microsoft.com/kb/929135

  Note: when you are finished troubleshooting, follow step 7 to start the computer in normal startup.

• Blue screen continues after the recent Windows updates - Update configuration 3 of 3 0%

  original title: blue screen continues after the latest updates of Windows

  Last Thursday while I was at work, an automatic update downloaded on my computer.  When I got home, the blue screen has increased and said "update configuration".  3/3.  0%.  Do not turn off your computer.  Well, keep the computer restarts and the same screen appears.  Over and over again.  At least 40 times.  Finally, I turned the computer off and when I turned it on... I hit 'f-11' and performed a scan on everything and everything was ok.  Then I did a system restore point to before last week and he ran.  When the computer is started again, the same "update configuration" screen always shows!  How to do the work to turn back normally?

  Linda,

  The link below has options to solve your problem of loop.

  http://support.Microsoft.com/kb/949358>

  04/25 / 1112:57: 43 pm

• Tandberg 6000 MXP restarts continuously after 1 minute

  Hi all

  I have a Tandberg 6000 MXP. Recently, it restarts continuously after only 1 minute. Anyone facing this problem?

  Please help me.

  Thank you.

  I had something similar happen to me with an EX60. It turns out that there was a problem in the registration information sip with the same information for indoor and outdoor record. Wiped factory reset the problem then reconfigure

  Sent by Cisco Support technique iPad App

• CP4 - Pause a slide with several buttons and continue after clicking a specific button

  Hi all

  I know that a break has been discussed, with the idea that you can use a clickbox (tiny/transparent) to pause the slide in CP4.

  My problem is that I have a few buttons to show/hide a scenario/question in a slide that is suspended with a clickbox.  I would like a particular button to advance the slide (for example, the button 'Next').  Currently * any * button will UN-pause the slide even if all the buttons use advanced actions and are not defined for advnace slide to the click.

  Basically, I want to achieve this goal:

  http://kb2.Adobe.com/community/publishing/871/cpsid_87182.html

  Scroll down for the film and ignore everything apart as a result of clicking on the US/Europe/ISO buttons, you don't advance the slide. (I don't like on all counters/times etc.).

  BB

  (just in case it is useful to my slide includes):

  (1) invisible clickbox to pause at the top of the timeline (i.e. "put on the map"

  (2) an another clickbox with a legend of success/failure (that I want to advance the slide)

  (3) a "Hide" button that hides the name of a legend and shows another button (all with a tip action)

  (4) a "show" button that shows the 'hide' button and the legend (by peak action)

  (5) a couple of areas of turnover used to mimic navigation so that the user can click in the right place for (2).

  )

  Hello

  What's you point to one of my articles? Oh, I see now you are intrigued by the little film. It was created with Captivate 5 and CP4 is a little heavier.

  I just answered a question similar, but explained by adapting the user file. He wanted to have several areas to click that showed a text caption and offer the user the opportunity to click as many times as he wanted to in order any on those select boxes. Only when you click on the continue button (or click box), there should be a navigation to the next slide. If I understand you correctly, this is a similar case?

  My workflow: do NOT use multiple actions for areas of click to show/hide captions. He must not trust at all, and in addition you must go back the playback head to avoid it continues after clicking on a CB. Create a tip action for every click like this screenshot:

  

  Here, a single text of the legend was hidden, but can be extended to many of course. The last instruction (assignment) is important: it puts the read head back a frame, so that it remains before the point of interruption.

  I blogged about this type of micro-navigation once, but the examples are for CP5 and later versions:

  Micro-navigation in Captivate

  Lilybiri

• Need of the Movie Clip to loop continues after the end of the main movie

  Kind of a noobie questions. I want my main movie to play once, but I want that some clips of films to continue after stopping everything.

  Basically I have about six video clips (on a separate calendar) falling snowflakes. I just continue their loop than any other while what remains in place.

  I think I uncheck "Loop" in the main parameters of publication, then place an action somewhere in the clip? If you could, be very specific where to place the shares (the exact structure, in scenario clip main timeline or movie, etc.)

  Thank you very much!

  I don't know what you mean when you say 'a separate calendar', but if you have movieclip objects that animate along their own calendars, the only thing you need to do to keep them in the loop is to NOT put a stop() command in their timelines.  They will automatically loop on their own, regardless of what makes a different chronology.

• Computer opens with my name on the Welcome screen after Windows Update.

  Original title: opening session/Welcome screen problem

  My problem started when an automatic update installed Windows Indexing and also, somehow, caused my computer to open with the Welcome screen with my name on it instead of just starting on the desk as he always did before this update. I wanted to or if necessary so I looked for a way to disable indexing. A web page was told to delete all except Richard (my name) account and the guest account. There was an account for Net framework so I removed it. Since then my computer wants to log on just "administrator." To change this, I was told to go to user accounts and change the way in which Windows connects. I did and now Windows gives me an error message when trying to login "administrator." I click the OK button on the error message and then it gives me the choice to open a session like me or comments. I chose me and then it connects. I want just XP to go directly to me.

  I'm sorry if my question above seems confused. It's because I'm confused about this. I hope it's clear enough for someone to help him. I tried the Help Desk, but they charge I have no money. I felt that they should help because this problem was caused by intrusive and unnecessary changes to my use normal XP that Microsoft made without asking me to do or not.
  TIA,
  KK

  Thank you.  I had to do things a little differently that you suggested, but it helped. I had to check the checkbox that users must enter a user name and password so I could choose my name and then after doing that I have disabled, users must enter a user name and password and click on OK. I left the White Hen of password window comes and then rebooted and it worked.

• Windows 7 is hung up on the Welcome screen after deferred journal

  My problem is similar to what in the http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/windows-7-hangs-up-at-the-welcome-screen/144a1b42-3b5d-4cf0-b66f-d6c063768b44 except when I connect normally, it does not occur.  It is only if I turn on the computer, go away and come back some time later (say 15 minutes) and then enter the password to connect, it hangs at the Welcome screen.

  Hi Frank,.

  -For how long have you been faced with this problem?

  -Have there been recent changes or updates made on your computer?

  Please check if you face the same problem when recording in safe mode. It is a possibility that one of the non-microsoft application or driver is causing this issue. Start in safe mode and make sure that us. If you are able to start properly in safe mode, we can perform a clean boot in order to find the root cause.
  
  Step 1.
  a. restart your computer.
  b. when the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 on your keyboard key repeatedly until you are presented with the screen Windows 7 Advanced Startup Options.
  c. using the arrow keys, select the desired option of Mode without failure.
  d. press the Enter key on your keyboard to start in safe mode of Windows 7.
  e. when Windows starts, you will be at a typical logon screen. Connect to your computer and Windows 7 goes into safe mode.
  f. do whatever tasks you need and when you are done, reboot to return to normal mode.
   
  If it works fine in safe mode try performing a clean boot in order to find the cause root.
  Step 2.
  You can try a method clean clean boot to find out which application is causing the problem.
  Clean clean boot.
  a. Click Start, type msconfig in the search box and press ENTER.
  The user account control permission.
  If you are prompted for an administrator password or confirmation, type
  password, or click on continue.
  b. on the general tab, click Selective startup.
  c. under Selective startup, click to clear the load startup items.
  d. click on the Services tab, select the hide all Microsoft Services check box and then click Disable all.
  e. click OK.
  f. When you are prompted, click on restart.
  g. after the computer starts, check if the problem is resolved.
   
  If the problem is resolved to check what is the cause of the problem, referring to the link given below:
  http://support.Microsoft.com/kb/929135
   
  Also, you will need to uninstall and reinstall the software problem on your computer.
  
  Reset the computer to start as usual
   
  a. When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  b. Click Start, type msconfig.exe in the start search box and press ENTER.
  c. If you are prompted for an administrator password or for confirmation, type your password, or click on continue. On the general tab, click the Normal startup option, and then click OK.
  d. When you are prompted to restart the computer, click on restart.
   
  It will be useful.

• Windows 7 does not start after the Welcome screen after password

  I've been running Windows 7 for the last 10 months with no problems until a few days ago. The PC starts fine, goes to the password screen, accept the password and then adheres to the Welcome screen.  The PC is not frozen, the cursor moves and the circle just keeps running load.  It starts perfectly in safe mode and safe mode with network.  This problem started to occur intermittently, but tonight, it took 4 re - begins to initialize.

  Would be grateful for any ideas.

  Hello
  
  a. did you software/hardware changes to your computer before this problem?
   
  Step 1: Try to perform the clean boot in safe mode and check. This is perhaps due to some third party software installed on your computer.
  Reference: http://support.microsoft.com/kb/929135
   
  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.
  Measures to check the application event log:
  a. Click Start.
  (b) in the search box type eventvwr.msc , and then on enter.
  c. now, click Application in the event viewer (local).
  d. now, looking for event log on the right side of the event viewer window.
  http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• 'This computer is not running Genuine Windows' notification continues after activation

  A few months ago, my PC Windows 7 Professional has started raising the notification "this computer is not running Genuine Windows" with the option "pay online now.
  This Genuine Windows warning message a couple of times a day.
  I have this PC for 4 years with no problems.
  In Control Panel > system, Windows has shown as active.
  I also noticed that Windows Update has stopped working.

  In my research, I found suggestions about updating the Intel RAID controller drivers, what I did and it fixed the problem Windows Update.
  Genuine Windows warning messages continued.

  I was unable to find my original product key Windows sticker/disc for the game at the Windows on the PC product key.
  This pop-up became really annoying, I decided to buy a new key using the button «Solve online now»
  I placed an order for "product name:" GGOK - Win7 Professional English "and activated Windows with the new product key."

  I always get the Genuine Windows warning message popping up every day.

  So my question is, how do we stop this message all the time to appear on a Genuine Windows active?

  Here are the results of the execution of MCADiag after activation.

  Diagnostic report (1.9.0027.0):
  -----------------------------------------
  Validation of Windows data-->

  Validation code: 0
  Code of Validation caching online: 0x0
  Windows product key: *-* - GFKQ6 - QT6K9-X4B89
  The Windows Product Key hash: 4Ny0C8YU9gc5sxR + prlXaLwfWrs =
  Windows product ID: 00371-851-1339964-85391
  Windows product ID type: 5
  Windows license type: retail
  The Windows OS version: 6.1.7601.2.00010100.1.0.048
  ID: {162225B6-2067-4FDA-99BC-58C1D4E0A765} (1)
  Admin: Yes
  TestCab: 0x0
  LegitcheckControl ActiveX: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: Windows 7 Professional
  Architecture: 0 x 00000009
  Build lab: 7601.win7sp1_gdr.130828 - 1532
  TTS error:
  Validation of diagnosis:
  Resolution state: n/a

  Given Vista WgaER-->
  ThreatID (s): n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002

  Windows XP Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: B4D0AA8B-604-645_025D1FF3-364-80041010_025D1FF3-229-80041010_025D1FF3-230-1_025D1FF3-517-80040154_025D1FF3-237-80040154_025D1FF3-238-2_025D1FF3-244-80070002_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program Files (x 86) \Mozilla Firefox\firefox.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {162225B6-2067-4FDA-99BC-58C1D4E0A765}1.9.0027.06.1.7601.2.00010100.1.0.048x 64*-*-*-*-X4B895S-1-5-21-608111622-1764280109-496313565the system manufacturer,System Product NameAmerican Megatrends Inc. 00371-851-1339964-85391 1901 20090212000000.000000 + 00025C83407018400F808090409GMT Standard Time(GMT+00:00)03109

  Content Spsys.log: 0 x 80070002

  License data-->
  The software licensing service version: 6.1.7601.17514

  Name: Windows 7 Professional edition
  Description: operating system Windows - Windows (r) 7, retail channel
  Activation ID: e838d943-63ed-4a0b-9fb1-47152908acc9
  ID of the application: 55c92734-d682-4d71-983e-d6ec3f16059f
  Extended PID: 00371-00170-851-133996-00-2057-7601.0000-0092014
  Installation ID: 000996078782372396423256420446696633076043100242185060
  Processor certificate URL: http://go.microsoft.com/fwlink/?LinkID=88338
  The machine certificate URL: http://go.microsoft.com/fwlink/?LinkID=88339
  Use license URL: http://go.microsoft.com/fwlink/?LinkID=88341
  Product key certificate URL: http://go.microsoft.com/fwlink/?LinkID=88340
  Partial product key: X4B89
  License status: licensed
  Remaining Windows rearm count: 4
  Trust time: 01/11/2014-10:31:12

  Windows Activation Technologies-->
  HrOffline: 0x00000000
  HrOnline: 0x00000000
  Beyond: 0 x 0000000000000000
  Event timestamp: 1:8:2014 18:15
  ActiveX: Registered, Version: 7.1.7600.16395
  The admin service: recorded, Version: 7.1.7600.16395
  Output beyond bitmask:

  --> HWID data
  Current Hash HWID: NgAAAAEAAAABAAIAAwACAAAAAwABAAEAln1WJo3zgHPOcDJrje + sKe7imAN1Xzpx1qec00xY

  Activation 1.0 data OEM-->
  N/A

  Activation 2.0 data OEM-->
  BIOS valid for OA 2.0: Yes, but no SLIC table
  Windows marker version: N/A
  OEMID and OEMTableID consistent: n/a
  BIOS information:
  ACPI Table name OEMID value OEMTableID value
  APIC A_M_I_ OEMAPIC
  FACP A_M_I_ OEMFACP
  HPET A_M_I_ OEMHPET
  MCFG A_M_I_ OEMMCFG
  LASRYVITRAGE A_M_I_ AMI_OEM
  OSFR A_M_I_ OEMOSFR
  SSDT DpgPmm CpuPm

  I can't see anything in your report to explain your non-genuine message.

  I suggest that you look for malware.

  I recommend that you run Disk Cleanup or cCleaner to remove temporary files as this will reduce the time to scan security software.

  Start the computer in safe mode with network and download and install Malwarebytes (free version for users only - not the trial version), updated definitions and run in normal mode. Disable other security software while you do the analyses.

  http://www.Malwarebytes.org/products/malwarebytes_free

  Download and run ADWCleaner:
  http://www.bleepingcomputer.com/download/adwcleaner/

• Designjet 500: error 81:01 continues after changing the sensor roller encoder

  OK, as described in the title, I started to conspire problems some time previously, I invetigated one error 81:01 a problem with the sensor roller encoder, I disassembled the plotter past the sensor and I worked for a few months. Now the error is back, so I decided to change the sensor for a new, but the 81:01 error continues.

  A few times the plotter says has a paper jam and sometimes, paper begins to roll and dosnt stop.

  Can someone help me with this?

  OK, the problem was solved by changing the roller encoder sensor, I described in the title, after this error persists, l I demonstrate the tracer again and the stop error after I cleaned the optical sensor of the encoder to roll in the car. So that's been the problem, I hope this can help someone.

  (Sorry for English)

• Support continues after the withdrawal of car dock?

  I recently had the car Motorola docking station for my 2 x and I have a problem where the phone is continue to load after that I have deleted from the dock. More recently, the car Dock app will leave after the start. On this issue, I checked and it is not on the list of automatic end and remains lit when it connects to the car bluetooth system.

  Anyone have any ideas?

  Thanks in advance...

  The question disappeared completely after the update of GB. I see now the car dock notification when there was nothing before.