Welcoming place?

Similar Questions

• Windows XP place locks upwards at the Welcome screen.

  Old hard drive, different computer

  Hello!  I am trying to help a friend get a small achievable tablet to take with him to the chemo.  I was not able to enter the original hard drive because of password protection, so I installed an old hard drive to a laptop, I used to have in it.  I reinstalled the XP operating system since the DVD provided with the original computer and now it won't let me past the opening screen.  He repeats to me there was a problem with the activation of Windows, and when I click Activate, it says Windows is already activated.  I would like to get fixed for my friend before his next turn.  Very small pieces would be appreciated!

  Old hard drive HP ZE4900, just trying to make it work in a Toshiba M200 tablet.

  As long as you have used the product key for Toshiba XP and media during the installation, you should be able to activate"

  How to activate Windows XP
  http://support.Microsoft.com/kb/307890/en-us

  See the section titled: "how to activate Windows XP by phone.
  Also, make sure that you do not confuse the product key numbers and letters
  (number 8 for the letter B, etc.)

  ===================================================================

  Blank page to activate Windows in the wizard of Windows Product Activation
  http://support.Microsoft.com/kb/314935

  How to contact a Microsoft Product Activation Center:
  http://support.Microsoft.com/default.aspx/KB/950929/en=us

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Once Windows activated / Genuine Advantage Notifications:
  http://www.Microsoft.com/downloads/en/details.aspx?displaylang=en&FamilyID=afd45b36-3d77-4259-801c-d31a9a90cdcf
  (This tool will confirm that the copy of Windows installed on your PC is genuine and authorized)

  J W Stuart: Http://www.pagestart.com

• Delete the people & places of Photo Albums

  It was sometimes a little boring, but how do you remove the people and places of your Photo Albums?

  Hello calicharles,

  Welcome to the communities of Apple Support!

  I see you're wondering if you can remove the sections people & places album in the Photos app. I understand only eager to have albums you want. I can help you with this.

  In the Photos of 10 iOS app, the albums of people and places are designed to help you better organize and view your Photos. You cannot delete these albums.

  Best regards.

• Problems connecting to Toshiba Places on 32RL938G

  Hi all

  Sinus, I have the TV 32RL938G I noticed some issues related to places of Toshiba. Several times I was not able to access the service due to the error of connectivity. What I understand from other users of Romania have problems of same. Can you please let me know the address of the Toshiba Places portal web-service (ip/url) my tv tries to reach when accessing to the Toshiba places so I can test connectivity from my ISP?

  Also, I note that recently Toshiba Places had closed just (this info I got from toshibaplaces.com) and there is a new service rather symbalooplaces. Can you please let me know how that affects my tv? Toshiba places will continue to work for this TV.

  > Also I notice that recently Toshiba Places had closed just (this info I got from toshibaplaces.com) and there is a new service rather symbalooplaces. Can you please let me know how that affects my tv? Toshiba places will continue to work for this TV.

  Yes, I read that also service Toshiba Places has been replaced by parts of Symbaloo.
  http://www.symbalooplaces.com/welcome.html

  Perhaps connectivity errors related to the transition to the symbalooplaces

• Re: New Toshiba Places UI will be available for all Smart from Toshiba TVs?

  I'm seeing this right, there are now new models of tv with a toshiba places UI upgrade that has more content.

  I 958b 40, which is hardly old but not this means toshiba has forgotten about it and will not add to the places with more applications?

  I just saw that they now offer netflix a bbc sport what id welcome but can't find it on my TV, even though it offers the esn to netflix in the system menu. I was a little disappointed by the places offering initially but if it is true im a really disappointed.

  y at - it a update on how to improve the places on all the tv or not?

  Oddly enough, when you go to www.toshibaplaces.com you are automatically redirected to www.symbalooplaces.com with a nice interface and already available in several languages.

  But it is unclear if this redirection means that Toshiba Places would be replaced by Symbaloo and I have not found much info on internet right now on this new project.

• Every single website, or a link in a Web site page is added to my place bar/address bar menu drop-down. How can I stop this? This just started happening.

  Each url address unique Web site, or the URL to a Web site page is added to my place bar/address bar menu drop-down.

  I don't want any added or registered in the address bar. Many used to be saved only the URL I used it but now, each unique url (and url in a url) that I visit are added to it.

  How can I stop this? This just started happening.

  I'm sure it's a simple parameter browser, but I checked and nothing gives an option to control this.

  Firefox 3.0.17
  Windows XP

  User Agent

  Mozilla/5.0 (Windows; U; Windows NT 5.1; en-US; RV:1.9.0.17) Gecko/2009122116 Firefox/3.0.17

  You are welcome

• HP officejet pro 8600: software in place of the stands to check out more of network environment

  My printer was not scanning.  I uninstalled software and keys record, then downloaded the new software, but to put in place the stalls on verification of network environment, and he said: HP Officejet NO ANSWER.  After that, I start HP Print and doctor Scan, which said that the comprehensive software solution is not installed, so I went to install, but then I got the message "Unable to download". I tried several times in vain.

  When I go to devices and printers, the HP OfficeJet Pro 8 icon shows a yellow flag, then I will troubleshoot option but they do not find a solution for my printer.  I wonder if anyone knows a solution for my printer problems? The printer is less than 3 years.  Thank you

  Hi @yga and welcome to the Forums of HP!

  I see that you are looking to install the printer software. I would like to help!

  I would start with a power reset the printer.  Unplug the power cord from the printer and the power outlet, then wait 60 seconds. After 60 seconds, plug back in the printer. Make sure that you connect the printer directly to a wall outlet. Make sure to bypass any surge protector or power bar.

  Then, I would uninstall the printer softwarein case there is no residual software left.

  Once it is uninstalled, I suggest you put your system in clean boot mode in the configuration of Microsoft.  You can do this by following this document: How to perform a clean boot in Windows.

  Once the computer is in clean boot mode, I would suggest to reinstall the HP printer install wizard for Windows.

  Good luck and please let me know the results of your troubleshooting operations. Thanks for posting on the HP Forums!

• Welcome screen very long

  Hello

  There is a problem with my laptop - HP ENVY 15-j001er: she starts off very long during the Welcome screen. And it can do not to start at all. I have to reload each time this happens. The laptop is new. I think that happens because of the slow HARD disk - only 5400 revolutions per second. Operating system is windows 8.1.

  What could be?

  Hello

  Good to hear, can I also recommend downloading Malwarebytes on the net (its free) search Google Malwarebytes download and install the program. Open the software and display the top click on "Refresh" once the update is done choose scanner and do a full scan of your system. When the scan is complete click "View the scan results" and nothing found will be listed, and then place a check next to detected objects and click on remove, you must perform a reboot once invited to remove completely all threats...  If you use malwarebytes alongside your Norton Anti virus (regular tests), your system will be initiated. Don't forget to update Malwarebytes

  Checkurtech

• Install the ink cartridge in printer HPdeskjet. Any help welcome thanks.

  How to install a new cartridge into the HP deskjet printer?  Any answer to this question welcome thank you. emsea

  My experience is you open up the Panel above paper tray trolley is brought to the Center.  Remove the cartridge or the filler of transport remove the tape cartridge, insert it this end taaped goes first, inclined downwards. push snap down to lock it into place.

• Setup of Windows Server 2012 cannot find a place to store temporary files

  I am trying to upgrade Windows 2008 R2 DataCenter Windows Datacenter of 2012

  I use the image en_windows_server_2012_x64_dvd_915478.iso - unpacked on C:\ or engraved on DVD

  DVD - upgrade is not allowed and I am referred to operation of installation of Windows 2008

  At the start of upgrade, I get the blue screen with 'Install now' followed by not referred to the Microsoft forums several times:

  Windows Setup cannot find a place to store temporary files... Error code: 0 x 80070490

  There is a lot of space in Windows 2008 records, also on the startup disk, I created a large partition (16 GB) just in case where.

  It does not help.

  All messages on this problem - I didn't yet have those associated with AHCI - not sure the relevance/importance.

  The material is an old IBM Intel Xeon 3 GHz 64-bit server.

  Any idea is welcome

  Support is located in the Windows Server Forums:
  http://social.technet.Microsoft.com/forums/en-us/category/WindowsServer/

• Changes in LV 8.6 with the placement of the object while that paste from the Clipboard

  Hi all

  I noticed a change in behaviour of LV 8.6. When I want to place an object on the Clipboard (constant or terminal to the block diagram or control to FP) in earlier versions, that I could make a click at some point and after Ctrl + C the object appeared to this same position. This is useful if you want to place a control in a FP-specific or component within a structure on the comic. This does not work in 8.6 more and I find it very annoying to collect the object to the center of the window. Is this a bug or I have not found the box in the Options dialog box? I understand that it makes it easier for novices, but this very useful feature of collage predetermined's too bad to remove this feature.

  Welcome, Dave

  
  

• 6835 HP printer all in one: HP 6835 put in place problems

  I have trouble getting my new 6835 HP to work with our windows 8.1 machine.  Set up the printer by installing disc and at the end (after that the printer is supposed to be set up), she wants to send me to a web address that gives me just an error message on the computer screen.

  The printer appears on my printers Control Panel menu but it tells me that "driver is not available.  I get an error message when I try to print from this computer.

  Ironically, with no software in place, our comfortable Macs until the wireless printer and can print.  And mobile devices to print as well.  It's just the windows laptop 8.1 where the printer has been installed in the wireless home network that has the problem.

  I tried to download the drivers and software HP and re - install instead of using the drive... with exactly the same result (sent to a web address that gives an error).

  Any help would be appreciated.

  Hi @mitchjj,

  Welcome to the HP Forums!

  I see that you have trouble to install your HP Officejet 6835 on Windows 8.1. I'm happy to help with this installation problem!

  I recommend the following solutions:

  1. Uninstall the software. Uninstalling the printer software.
  2. Clean boot the computer. How to perform a boot in Windows.
  3. Disable all antivirus programs. How to disable the Antivirus in Windows 8?
  4. Disable all firewall programs. Disable the firewall on the computer desktop of Windows or Windows 8 8.1.
  5. Reinstall using the printer HP install wizard for Windows.

  I hope this solves your problem and I thank you for posting!

• I have not connected to hotmail for a while, 3 months or more, and when I did there is absolutely nothing in my Inbox unless the Hotmail team welcome. Where all my stuff?

  lack of everything in my email account

  I have not connected to hotmail for a while, 3 months or more, and when I did there is absolutely nothing in my Inbox unless the Hotmail team welcome. Where all my stuff?
  That's happened?

  Darling
  Just a step: none forum available choices apply to this question.

  Hello CherieBurns,

  The best place to ask your question of Windows Live is inside Windows Live help forums. Experts specialize in all things, Windows Live, and would be delighted to help you with your questions. Please choose a product below to be redirected to the appropriate community:

  Windows Live Mail

  Windows Live Hotmail

  Windows Live Messenger

  Looking for a different product to Windows Live? Visit the home page Windows Live Help for the complete list of Windows Live forums to www.windowslivehelp.com.

• Lost the screen of welcome with identifiers and icons.

  After fiddling around with various locations in the control panel and my computer, somewhere, I changed the way I connect to the computer. Instead of the usual welcome screen all that I get is a small window of MS asking me to enter the user name and password. Makes me on my account but I can't seem to find my way to where I changed it in the first place. Really want the screen of welcome and icons back. Operating system is Windows XP Professional SP 3. Advice will be highly appreciated.

  Control Panel > user accounts > Change the way users log on or off > use the Welcome screen

• HP 14-r015tx: Windows 8 slow start welcome screen

  Hello

  I have a HP 14-r015tx running Windows OEM (preinstalled) 8.1 update and update Windows via Windows Update today (08/11/2015).

  I have this problem where whenever I start my PC after Windows loading-black-screen with the HP logo (this approach indirect loading animation), get this screen "Please wait...". "so long as about 4 to 8 minutes until I get my account picture and the name with the 'Welcome' screen and my office appeared. I tried a lot of things:

  -Defragment all my hard drive partitions,

  -Optimize all my partitions of hard disk with the Windows defragmentation tool,

  -Used TuneUp and clean all the junks, defragment the registry clean registry and redefragment my hard drive partitions.

  -Uninstalling most of my games and unused applications (have 36.4 GB of free space on C,)

  -Use cleanmgr and cleaned all the possible junks from there.

  -Updated Windows 8 on a regular basis, and I just updated on 8 August 2015.

  -Looking upward on my hard drive deep and my records and clear on the unused entries.

  -Turn off much, services.msc and start apps services

  -From msconfig, I put a few services, and

  -Updated my BIOS HP PC software.

  I do not understand on this subject. I tried many things and I can't fix this crappy Windows 8.

  In conclusion, my questions are:

  1. How do I fix this shit?

  2. can I I defragment RECOVERY (D [2 GB] partition?) (I think it's the Windows Recovery Partition)

  Thanks in advance.

  Hi @phillmont22900

  Thank you for visiting the HP Forums! A place where you can find solutions for your problems with the help of the community!

  I stumbled upon your post on the laptop and wanted to help you! I looked in your question about your laptop 14-r015tx HP and problems with Windows 8 slow start to the Welcome screen. Here is a link to show you how to address the power of plan options in Windows 8. Attached is a screenshot that shows you how to activate the quick start.

  Taken from the site Winaero.

  I hope this helps.

  Thank you.