Western Digital elements Desktop 1.5 WDBAAU0015HBK to external hard drive F:------is not accessible? !

Similar Questions

• Could not open the Western Digital My Book Studio WDBC3G0020HAL 2 TB external hard drive

  Cant Open Western Digital My Book Studio WDBC3G0020HAL 2 to external hard drive, I reformatted it from mac to pc and it does not appear on my computer

  Cant Open Western Digital My Book Studio WDBC3G0020HAL 2 to external hard drive, I reformatted it from mac to pc and it does not appear on my computer

  What file system formatait you with and on what system do you have formatting?

  Only, I went on the management of windows and formatted disc. He says it is online, but it does not appear on my computer to access. I appreciate the help

  He receives a drive letter in disk management?

• Western Digital Elements Desktop WDE1U10000 1 TB external hard drive

  I had used this external HARD disk to store the files from my windows XP laptop and also to create backups for my 2 desktop computers running windows XP.

  Then, I upgraded 2 desktop PC for windows 7 and now I'm trying to connect the disk external DRIVE for desktop computers to perform backups for future restore points, but the PC does not recognize the HARD drive, but give me a message that a unidentified USB device is connected... .but fails to recognize the drive.
  The HARD drive still works fine with my windows XP laptop.
  Can what steps I take to get this HARD to be recognized by the Windows 7 desktop PC?
  Are there drivers, I need to load or partition the HARD drive on the XP machine, then on Wndows 7 machines?

  You may need to install the motherboard chipset drivers in order to have port drivers USB possible must be installed.

• The West WDH1CS10000 Digital My Book Home Edition 1 TB External Hard Drive

  After contacting a trojan virus, which I was able to get rid due to malware, my book was no longer recognized by my pc. It appears on the workstation

  as well as drive C, drive D, DVD RW drive e. Image Factory. My book came as F: drive but it does not open when I click on it. I disconnected and hung

  Once again, but with the same results.  It continues to blink and the Properties tab says it works correctly. Is it possible to reset it. I am a senior and can

  do a few things on the computer please keep things simple. LOL thank you for your time.

  Hi JackieFerrs

  It is possible that the virus has every firmware corrupted on that either its MBR (Master Boot Record). Unfortunately, the other means that your data is probably lost. But... before you'll start to panic please see below what you can do.

  Please visit this link: 'Western Digital My Book Home Edition 1TB_downloads' and...

  1. use the backup utility to backup your data if you have not done.

  2 use the software update on hard drive firmware update.

  3. use the software (all) link to download software for your Windows PC.

  4. download and install Drive Manager (if you wish).

  5. If still no luck on the connection that enables the link diagnostic tool to scan your drive for some questions.

  I hope this helps.

  All the best.

  Muzzy

• Western Digital Elements Desktop WDE1U6400 640 GB external hard drive

  Cannot successfully run backup - get the error message: System cannot find the specified file (0 x 80070002). What should I do to fix this?

  Hello

  I suggest you follow the steps in the link below and check if it helps:

  http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/this-is-my-error-the-system-cannot-find-the-file/b3a125be-474e-4dea-9944-9cb42bcc91c7

  It will be useful.

• The first Cam elements installed on an external hard drive?

  Elements has instala ed on an external hard drive? If no

  content files can be loaded here?

  Yes!

  2010/1/7 unicorn431 [email protected]>

  >

  Elements has instala ed on an external hard drive? If no

  content files can be loaded here?

  >

• BSOD when establishing an external drive of 3 TB Western Digital Elements on Win XP SP3

  I have a Dell Latitude E6400 with Win XP SP3 and I just bought a 3 TB Western Digital Elements external drive. When I plug it into the USB port, it seems that the drivers are about to install as they would with any new material, but I get a BSOD immediately.

  And what is 'exactly' the bugcheck BSOD error message?

  Windows XP 32-bit only recognizes the MBR disks and MBR disks have a size limit of 2 TB because of the limitations of partition table.  Greater than 2 TB of disk uses a style of partition GUID partition table (GPT) and 32-bit XP Window does not support this style of partition.  You will need get a Western Digital driver to use this drive with Windows XP.

  John

• Western Digital Elements WDBAAU0010HBK external hard drive,

  I want to use a Western Digital elements external hard drive WDBAAU0010HBK, but my laptop does not recognize it as a drive in windows Explorer. It gives notice that the hardware is installed and ready to use, but I'm not. In printers, and other devices, it displays an icon of the hard disk, but I only see the properties of the disc and not the files that are on it. I searched the internet for drivers for this drive, but WD elements has no pilot at all to its Web site, it says that the drivers must be installed automatically by Windows. I hope there's a sollution to this problem.

  Hello
  (1) have you made changes before the start of this issue?
  (2) you are trying to connect the external hard drive via the Hub?
  Method 1: My drive does not appear in Windows Explorer.
  http://support.Microsoft.com/kb/330140#appliesTo
  Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 (http://support.microsoft.com/kb/322756 /) how to back up and restore the registry in Windows

  Method 2: Open the hardware and devices troubleshooter.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-hardware-and-devices-Troubleshooter
  
  I hope this helps.

• Western Digital external hard drive to backup impossible after installing the MS Fix It program

  I installed MS difficulty it program and since then, I had backup problems with my external hard drive WD (Western DigitaL).  I've used this for many months to back up my entire computer, using my Norton program, and now I get the message that there is a problem "with the back up.  He asks me to check if the device is connected, (it is of course!).  I also noticed that my external hard drive has been changed to 'F' to 'G' after I installeld Fix It.  That's fine, but WHY?  Is it considered a CORRECTION device?

  WHAT'S PAST AND HOW I CAN GET THIS BACK TO NORMAL, SO I CAN EASILY BACK UP AGAIN? It's very frustrating.

  Thanks for any help you can give.

  Claudia

  Hello

  1. what fixit did you run?

  2. What is the exact error message you get when you try to back up?

  I suggest you do system restore and see if it helps:

  http://support.Microsoft.com/kb/306084

  It will be useful.

• Western Digital 1 TB My Book external hard drive on Vista 64 - Bit needs driver. Windows can't find it!

  Here's the deal. I bought a Western Digital 1 TB my book about 2 months ago. I plugged on my DELL XPS laptop running Vista 32 bit with no problems and managed to save all my files. Everything worked very well. Although this computer is damaged and sent to DELL for repair. Make the long story short, a replacement computer was sent to me. Now, I have a DELL studio XPS under Vista 64 bit and now the external hard drive is not recognized.

  I understand that Vista supposedly recognizes external drives and download the drivers when connected to the computer. Windows tries to find the driver but is unable to find and does not install. In Device Manager, the drive will appear as unknown device under other devices.

  I searched for an answer to my problem and posted on yahoo as well, but nothing useful that worked were found at the moment. When I do an automatic search for the driver, windows cannot find the software and refers me to the manufacturer of the device. Western Digital returns me to Microsoft.

  I tried all references to Western Digital troubleshooting, and as I said, this device works perfectly on the 32-bit system. I know that this has been a problem for many and would like to know if there is something I can do to get this device working once more. I don't want to reformat the drive, but if I do how can I if the Vista operating system can not find a driver?

  Thank you. Any help will be greatly appreciated.

  I searched for the 64-bit operating system compatibility page and indicates the compatible reader.
  
  This is the exact drive I own: My Book Essential Edition 2.0 WDH1U10000 - disk hard - 1 TB - Hi-Speed USB

  The issue is clearly with WD, the 64-bit driver that they provide or the firmware for their unit

• External hard drive Western Digital

  I have a Western Digital external hard drive, WD CAviar WD1200BB... it worked great except every now and then Windows would not recognize it.  This is easily fixed by unplugging the USB cable, wait a few seconds and then it reconnect.  Recently, my computer got stop without going through the process to good close.  Since then, Windows does not recognize the hard drive.  I went into Device Manager and there was a warning attached hard disk.  I uninstalled the drive and then installed again, however, now Windows indicates that the drivers are corrupt and it is impossible to install.  Western Digital said they use common drivers normally installed in Windows and I'm contact Windows to solve the problem.  What should I do because there is no update that my computer is telling me that I can install?

  Disconnect the hard drive and then go back into Device Manager. See if there's a warning flag in the list of universal Bus controllers. If so, remove the driver. Reboot and it re-charge the driver. Then reconnect the hard drive.

• Western Digital external hard drive not recognized in Vista

  This computer is Windows Vista Home Premium (32-bit) with Service Pack 2.

  I have connected an external Western Digital (My Book).  Sometimes the HD appears in devices such as WD My Book IEEE 1394 SBP @. Device Manager, and sometimes it isn't. ????

  No matter, it NEVER so appears as a disc when I look in Windows Explorer. ???

  Help, please!

  Thank you.

  You can get in trouble with your device drivers.  Go to Device Manager by going to start / find and type Device Manager and enter and then double-click on the program icon that appears.  Check each device to a red x, yellow! or white?  These identify devices with problems probably (drivers, but also of conflict or something else).  Click on each for more details and troubleshooting tips.  If you need to get drivers (and you shouldbring at least for an external hard drive and all you have time to do - they can help way beyond simply solve this problem), let the computer dealer or the manufacturer of the device (NOT of Microsoft Updates).  In fact, you must disable automatic updates in Windows Update driver as follows: http://www.addictivetips.com/windows-tips/how-to-disable-automatic-driver-installation-in-windows-vista/. Follow these steps to get the drivers: http://pcsupport.about.com/od/driverssupport/ht/driverdlmfgr.htm.  Once you have the drivers, you can install them via the Manager device as follows:http://www.vistax64.com/tutorials/193584-device-manager-install-driver.html.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• IO error 0x8007045D with Western Digital External Hard Drive in Windows 7

  I have a Western Digital 1 TB external hard drive, and I am currently running Windows 7.  When I try to move files on the hard drive I get the error 0x8007045D i/o and it won't let me move or copy the file.  What can I do to fix this?

  Error 0x8007045d is "ERROR_IO_DEVICE" - "the request could not be performed because of an i/o device error."

  Check the behavior in a clean boot, or insafe mode.  If it persists, you will have a problem with the external hard drive.

• Windows 7 does not recognize my external hard drive Western Digital model WD2500B007-NNI. __

  Does anyone know how to get the Western Digital external hard drive to work with Windows 7?  The external drive model number is WD2500B007-NNI

  Hello

  Do you see any yellow\red exclamation in Device Manager?

  I suggest to open disk management and check that if the drive is detected there, here are the steps:

  1. open computer management by clicking the Start button, click on the Control Panel, clicking system and security, clicking Administrative Tools, and then double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  2. in the left pane, click Disk Management.
   
  If the hard drive is recognized in disk management and if there is no letter assigned drive, I suggest you make a right click on the drive and assign a drive letter and check to see if it helps:

  1. click on the drive to change and then click on change drive letter and paths.
  2. do one of the following:
  ·         To assign a drive letter if it has not already received, click Add, click the letter you want to use, and then click OK.
  ·         To change a drive letter, click on edit, click on assign the following drive letter, click the letter you want to use and then click OK.
  ·         To remove a drive letter, click on remove and then click Yes to confirm that you want to remove.

  Check this link for more information:
  http://Windows.Microsoft.com/en-us/Windows7/change-add-or-remove-a-drive-letter

  Thanks and greetings
  Umesh P - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  [If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.]

• How can I make the best use of a new external hard drive and a new catalog full of photos just loaded into Photoshop elements 14 Organizer?

  How can I make the best use of a new external hard drive and a new catalog full of photos just loaded into Photoshop elements 14 Organizer?

  Keep all the files on external hard drive image?  Nothing else and no pictures on the desktop?

  Keep all image files both places?

  What is the best way to go through thousands of images in the Organizer to identify and place them in files?

  Once I've placed a file, I just leave it in the entire catalog or a way indicate to me that it has been sorted?

  As overwhelming, any tips/shortcuts/schemes, you can offer are welcome!

  As I only have the version of the EP, here is some info on the organiser:

  https://helpx.Adobe.com/Photoshop-elements/how-to/use-elements-Organizer.html

  Independent of how this feature works, you want to have your photos in one place and have a backup (second copy) somewhere else. All hard drives will not be successful at some point - some more early, some late - never trust to have your files in any safety devices if they are on a single disc. Once you have your sorted, it would be useful that you will organize/name/tag new photos immediately if the task is relatively short and simple. I copy my photos on my internal hard drive for my camera, take a quick look with preview to see who needs some changes and then decide where to put them - either drop them immediately after naming them or bring in an editing application and then file them away.