What 3G module is available in Portege R600

Similar Questions

• Face recognition is available for Portege R600?

  I was under the impression that this (a very competent machine!) R600 has face recognition - but I can't find this feature. Can I download from Toshiba?

  Thank you.

  Face recognition is also available on Portege R600.
  You can also find for download from Toshiba support page. There you can find the version 2.0.17.32 for Windows Vista.

• Portege R600 - where can I find the order of installation on Vista x 64?

  Hello

  I'll try to find a document that we'll know what order I should install my Portege R600 drivers and applications, there was one but I can't find it anywhere.

  Any help would be appreciated.

  Regards, Richard.

  Hello

  There is no special installation instruction details, but if you want to install the 64 bit Vista drivers then I recommend you start with the common as drivers:
  -Chip Set Utility
  -Display driver
  -LAN Driver
  -Driver Lan Wireless
  -Sound Driver
  -Intel Active Management Technology (AMT)
  - and so on...

  Please note that the laptop supports the SATA HDD controller and you need to install and include the SATA driver while the Vista Setup program.
  The SATA driver is part of the Intel Storage Manager.

• Portege R600 Vista Recovery disk

  Hello world

  Is a possible way to recovery vista recover disk from toshiba?

  I have the recovery disk xp that comes with my toshiba r600, but is there a way to get the toshiba vista recovery disk? Download? or something?
  I didn't create drive recovery with vista... so is he lost? I do not really need vista OS but just in case, is it possible to recover it?

  Thank you.

  Hello

  What OS came preinstalled on your Portege R600?
  Was it Vista?

  If so there should be an option that allows you to create a recovery disk.
  You can use the preinstalled called creator Toshiba Recovery disk which is able to create the recovery disk.

  But if you have already formatted the HARD drive then you will not be able to create this disc of recovery :(

  In this case, you should check this page:
  https://backupmedia.Toshiba.EU/landing.aspx

  See you soon

• Portege R600-4201 - are there USB sleep & charage available?

  There may be a setting somewhere that I missed, but when the device is OFF, no USB port is available to load another element.

  Thank you!

  Hello!

  Yes, normally the Portege R600 supports USB Sleep & Charge:

  This feature is available on the USB port which is marked with a lightning symbol. Additionally, make sure that it is enabled and you can check it using Toshiba USB Sleep and Charge Utility (start > all programs > Toshiba > utilities > USB Sleep and fresh).

  And don t forget that the machine must be compatible with the USB specification.

  Also, check the user manual! You will find lots of information on this feature.

• Portege R600 - what someone has installed OS FreeBSD

  Hello

  Someone trying to install freebsd on portege r600? BSD recognizes material etc...?
  All the problems? etc...

  Any experience and responses will be appricieated.

  Thank you.

  Hello

  Unfortunately I m not a R600 owner but in my opinion it shouldn't be a problem with the installation the most common devices should be recognized

  But of course you will not be able to install Toshiba special tools and utilities that are designed specifically for the Windows operating system.

  See you soon

• Portege R600 - y at - it a radio available internal broadband?

  Our previous laptops had internal radios from Sprint for access to broadband.
  Sprint will give us external modems for the R600, but it would be great if there was an internal option - one less gadget to drag around.

  Is there such a thing?

  Thank you!

  Hello

  To be honest I m not Portege R600 owner but I searched a bit the Portege R600 properties and specifications and unfortunately I didn t find all the details about this feature, so I doubt that this is possible with the Portege R600.

  Greetings

• Portege R600-10 q - 3G modem adding internal (Ericsson F3507g card)

  Hi all

  I recently bought Portege R600 but without 3G module. (at that time was not available). So I'll be happy to know what type of card numbers etc. of the piece. I need to buy and where to have the internal module 3 G works on my machine R600-10 q.

  Thank you in advance,

  Dave

  Manufacturer: Toshiba

  Device: G450

  Connection type: USB

  A new software is available from this link:

  [ftp://smccust020:[email protected]/TOSH/Setup.exe]

  This (3.7.671.33) fixes the problem with the update of DotNet framework v3.5.

  Support of SmartCom

• Portege R600 - display problem device change Utility

  We started to use computers laptop Toshiba Portege R600 series on my place of work. All laptops are home in a Toshiba Slim Port Replicator II. Laptops are all running a version of Windows XP Professional with Service Pack 2 applied (and of course a few customization business).

  The problem is with the display on the external monitor. The laptop starts according to the normal and connects to the fine. The Fn + F5 key and so we can switch between the external LCD screen and the laptop monitor. We can also extend the desktop on the external monitor without problem.

  The problem occurs when the laptop is not docked since the Replicator. After having similar problems with R500 series laptops, Toshiba following applications have been installed:

  (1) common modules (version 6.06.01)
  (2) controls Toshiba (version 3.31.3800)
  (3) button ON / OFF (version 2.5.1.0_IS115)
  (4) Toshiba utility (version 4.30.18)
  (5) Toshiba screen device change Utility (version 2.5.0.0)
  (6) Toshiba Hotkey utility for display device (version 3.4.5.5)
  (7) Toshiba Mobile extension 3 for XP (version 3.87.00)

  We now have the following symptoms:

  (1) detach, the "gear" icon appears and then the error "TOSHIBA Display Device change Utility is not installed correctly. Please install TOSHIBA screen utility unit of change. "
  (2) for the mooring of the laptop again, we get the "home" icon, and then the same error.
  (3) after that, the external monitor does not become active once again, until what you press Fn + F5.

  I have tried uninstalling / reinstalling the TOSHIBA screen device change utility. Have tried to remove the Mobile Extensions and install the software, tried a number of different things to make it work. Rebuilt 1 stop working and everything was installed in the order above without success. In fact, noted that during the installation of the TOSHIBA utility screen device Change the Setup screen starts and runs, but the window does not uninstall.

  This seems to be a driver problem with those from Toshiba, but I'm not sure. Someone at - it suggestions regarding this? The drivers that I use are on the site of Toshiba Australia (even if they are the same drivers found on the main website of Toshiba). The link below.

  http://www.ISD.Toshiba.com.au/71/live.dll/topic/content/driver_search_list.jsp?BV_SessionID=@@@1187200925 .1241154604@@@&BV_EngineID=ccccadeglfeghejcefecek fdffhdfgh.0 & theAction = true & CATOID =-15058 & MODE = NPRO & ProductMenu_0 = Notebooks & ProductMen u_1 = Portege & ProductMenu_2 = 1509603 & x = 22 & y = 7

  Post edited by: Will-SOE

  We have tried this on a couple of machines that are the same exact specifications. The model that is sold in Australia is a Portege R600, model PPR61A.

• Re: Portege R600 - port replicator is compatible with regional products?

  Community of greetings from Toshiba,

  I need to buy laptops for several employees who are moving between the United States, the United Kingdom and the Middle East.
  The Portege R600 exist in all 3 markets, but each has a slightly different part number.

  The part number Replicator of compatible Port to the R600 is difference to the United Kingdom, the United States and the Middle East.
  Users would be able to dock their laptops in one of the 3 offices, because they travel extensively between each country.

  What's the Slim Port Replicator II (PA3603U-1PRP) and Slim Port Replicator III (PA3681E-1PRP) compatible with each of the products of the soil of Portege R600?

  United Kingdom Replicator of ports Slim Portege R600-11B (PPR61E-01G00CEN) III (PA3681E-1PRP)
  Middle East Replicator of ports Slim Portege R600-10 b (PPR61E-00F00MAR) 2 (PA3603E-1PRP)
  USA, Portege R600-S4201 PPR60U - 01700C Slim Port Replicator II (PA3603U-1PRP)

  Someone has an experience buy Toshiba products in the Middle East? Or needed to use Docking Stations in offices in several countries?

  Thanks in advance,
  Ted

  (I posted a similar request in the Forum we and receives no answer - http://laptopforums.toshiba.com/t5/Port%C3%A9g%C3%A9-Laptops/Port%C3%A9g%C3%A9-R600-US-UK-Middle-East/m-p/32060#M489)

  Post edited by: TedRNelson

  Hello

  I think that it shouldn't be a problem with the different Portege R600 in combination with the Slim Port Replicator 3.

  Portege R600-11b, R600-10 b belongs to the same series (PPR61E), that the R600 US belongs to the PPR60U, but this should t be a problem.

  As far as I know the different R600 from different regions are not really different (some belongs to the same series) as far as I know there could be a difference between some pre-installed applications and some modules as for example the card wireless network, but this should not affect the use of Slim Port Replicator 3.

  Cheers mate

• Portege R600: How can I activate the modem 3G without original modem minipci slot

  Hello everyone,

  I own a Portege R600 (10 s) for laptop and I often use mobile internet.

  The built-in modem Ericsson 3507 is buggy, always freeze (and who need reset) from time to time. No firmware update or driver makes it more stable.
  So, I bought another 3G mini-pci modem, a huawei EM770, to replace the original modem.

  The problem is that I can't use more of the Fn + F8 combination to power on the 3G modem.
  The modem huawei is well detected, installed, but no power (the blue led is off).

  The question is how can I turn on the connector of the modem 3G mini-pci, without the original E3507 modem?
  Thank you in advance for any lawyer.

  M.

  Toshiba Value added package and control RF Utility 3 G are related to the F3507g (and F3607gw) and will not work with integrated modules, not supported by Toshiba.
  There could be BIOS problems as well.

  What was the problem with your F3507g?
  Looks like it works for many people.
  Maybe you have a bad Apple?

• Portege R600 - 13 X - how to reinstall the operating system on the new HARD drive?

  Hello

  I inherited a Portege R600 - 13 X of my colleague, who hit and killed the hard drive. I installed a new hard drive, but you don't have operating system installation diskettes as he said that the computer has not come with any. To make things even more difficult, I believe that the optical drive may not work. My old R500 had a dead optical drive and after I replaced it (he has not yet worked) I was told it is perhaps something to do with the ribbon cable, which piggy back off the coast of the SD card reader, then to the motherboard.

  Anyway, is it possible for me to install Win 7 Professional (I have the original windows key) from a USB flash drive? Or y at - it a specific OS recovery/reinstallation disk that I can download Toshiba?

  Any advice would be very welcome
  Thank you
  NJ

  I have a Portege R600, and he has been a formidable workaholic, although now showing its age with newer software.

  I think these machines came with pre-installed Vista and your friend must have created a set of recovery discs when they got off the machine.

  Toshiba did release a drive to upgrade when Windows 7 is released which was available to the buyer within the free upgrade period you. You may be able to find a disk, but you will need the Win7 license to go with it.

  If not, your only option is likely to be to buy a disk and license. Of course, you can find the specific Toshiba drivers are missing. If you think about it, it's extremely unlikely that you will be able to locate what is essentially a free Windows 7 download install disc.

  Without an optical drive, you need to use an external USB drive and the BIOS to boot from that first force.

  I hope that you have succeeded.

  Andrew

• Portege R600 - Windows 7 switch backlight does not

  I have a new Portege R600, comes with Windows 7 32 bit and the switch on / off for the backlight does not work.
  I installed the new VFR package, until I uninstalled the old. Also the latest version of the Bios.

  Use the support Toshiba button and placed in the file backlight.exe, still does not work. If I tap the backlight.exe file manually, it works.
  It is not a problem of material, as told in the hard drive of my old R600 with XP Professional and works of button.

  What can I do?
  Toshiba support is not able to help, to talk about the new facility, but is the original unchanged.
  Maybe in the button holder, I put in an option in the empty file?

  > Switch on / off the backlight does not work.
  AFAIK some BIOS versions contains the additional option to enable and disable the lighting.
  Please check if the lighting is not disabled in the BIOS.

  I also searched this forum for some tips and found this thread:
  http://forums.computers.Toshiba-Europe.com/forums/thread.jspa?MessageID=127192

  Check it!

• Portege R600 - issue of SSD upgrade

  I have a R600 10 q and I am interested to put an SSD in to replace aging / slow HDD have had a look at what others have said and there seems to be some compatibility issues.

  We know if these have been fixed with the new BIOS updates? or is there a list of compatible drives?
  Have a been a success with a particular model?

  Thanks for the help
  Tim

  I agree with Akuma.
  The use of SSD drive should not be a big problem.
  If something does not work, try to update the firmware of SSD drive for the last s.
  In most cases, this action has resolved most of the problems

  Since the Portege R600 supports a SATA controller, the SSD drive should support the same standard of controller.

  Good luck and thanks for sharing your experience after upgrading the SSD drive

• Portege R600-11b - cannot install Adobe Acrobat 9 - ActiveX problem

  I recently bought a Portege R600-11b and have tried to install Adobe Acrobat 9 on it by downloading it from the Adobe site.
  I spent many fruitless hours talk to Adobe to try to solve this problem.

  They concluded that my laptop is not compatible with the software.
  This isn't the case, that this laptop exceeds the specification of systems required in all aspects.

  The problem seems to be that it won't work ActiveX even after all the firewalls and anti-virus in disabled - I don't know hardly what to do - anyone has any suggestions please?

  > They concluded that my laptop is not compatible with the software.
  That s just absurd

  The Adobe Acrobat Reader software is a small application and can be installed on almost all computers and systems so that s certainly not a reason why you are not able to install this software.

  If this problem is related to the ActiveX, then you can change this in the settings of your internet browser.
  For example, using the IE7 you could modify this here:
  Tools-> Internet Options-> areas-> {}-> ActiveX controls and plug - ins area-> allow unused ActiveX controls to run without prompt

  You can also try to clean the operating system and the registry because the problem might be related to faulty registry entries.
  To do this, I would recommend using the free CCleaner tool.

  Finally and above all it s always advisable to consult the homepage of support from software manufacturers. Here you will find some documents on installation with the Adobe Acrobat Reader software problems.
  http://www.Adobe.com/support/reader/

  Check it out!