What brand of blu ray discs work on a 8500 XPS?

Similar Questions

• Drive BD - ROM does not recognize Blu - Ray discs

  I bought a laptop computer to Leap Motion 17j-100 HP ENVY on measurement with discs Blu - Ray player a few months in the United States. I moved to India now with this laptop.

  For the BD - ROM Bank, I set the region to region 5 (which I think also corresponds to region C Blu Ray) for the India.

  I bought a few Blu Ray discs of the India itself - Bourne Legacy, birds, how to catch a thief.

  It works great on Power DVD 12 cell phone comes pre-installed.

  Recently, I installed updates and updated the Power DVD software on the Forum from the HP Support site.

  I've updated all the drivers and there will be no more updates to install.

  The drive plays Cds/DVDs very well. But he stopped playing Blu Rays. I thught it could be solved by using a different sofwatre like Corel Win DVD so I installed a version of 30-day track, but the same problem.

  Basically, the BD - Rom drive did a few laps and then stops, say that there is no disk in drive F:

  What can I do to make the Blu - Ray discs works again

  Thank you

  Thank you MechPilot and a peer. I managed to solve the problem by buying the full version of Power DVD separately (Power DVD 14) (apparently the Win DVD trial version is not suitable for the capabilities of Blu - Ray). I guess it was a software problem after all

• Qosmio F60 - error when burning Blu - ray discs

  I have a Qosmio F60

  Recently, I tried to burn my data on BD - R 25 gb disc. Aftre burn about 6 GB of data, it stopped burning with unexplained error. I tried another disc with the same problem. This time the suggested message updated firmware. This is MY * A BD - MLT uj240ES blue ray player. I am unable to find any updated firmware update. Current firmware is version 1.10.

  Can someone help me on this

  Hey,.

  If a firmware update is available, you can find it on the official website of Toshiba:
  http://EU.computers.Toshiba-Europe.com

  If this isn't the case, you already have the latest version of the firmware.

  In your case, I recommend to test different brands of blu - ray discs. I have good experiences with Verbatim and TDK discs.
  Check this box!

  By the way: I prefer a backup of the data on an external HARD drive. It of safer and easier! ;)

• LG GGW-H20L ATA use to work now, does not burn and no formatting Blue Ray discs but a DVD.

  I was burning Verbatim 25 G Blue Ray discs like crazy, as well as the monolayer regular and double layer DVD for more than two years and now it will not burn or format Blue Ray discs. It appears in my computer and it won't give me the options of the ISO image or Live to get in shape. I use both bury camera Panasonic and Adobe CS4 software.  I use only the part simple DVD sex the LG GGW - H20L ATA now. I tried several things here on the internet, but nothing works, nothing works yet. Even tried the new installation of Vista 64 and still nothing. I tried to reflash LG GGW-H20L-ATA with the same version of the software package.

  Anyone has the same problem or a solution? I need Blue Ray for my video business.

  Hi NewVideo,

  Try the troubleshooting steps suggested in thisthread.

  Using third-party software, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third-party software can be solved. Software using third party is at your own risk.

  Dena
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Encoded video does not work on Toshiba Blu - ray disc player

  I have a problem I'm trying to encode a sequence of images into a video container, but does not work the video encoded on toshiba blu - ray disc player... I use the following command to ffmpeg to encode images and convert a video:

  ffmpeg-i "C:\ManVsWigan\Frames\%d.png" - vcodec libx264 'C:\ManVsWigan\encoded.mp4 '.

  I have tried several video codecs but no luck yet
  "- vcodec mpeg4.
  "- vcodec mpeg2video.

  If you have an idea please help me

  >... I'm trying to encode a sequence of images into a video container
  Please be so kind and try to explain why you need all this?

  I mean Toshiba portable computers offers equipped with pre-installed readers and offer laptop owners to enjoy watching BD movies. Everything else is not interesting for s Toshiba support I guess that if I put t think that this question has something directly with Toshiba.

  Have you tried to find the answer on another forum?

• Qosmio-F750-11U: Blu - ray disc player no longer works

  My Blu - ray player stopped working a few months previously, even if it still plays DVD.

  TEMPro told me that there is a new driver, so I tried to install that:
  Support1. Toshiba-tro.de/Tedd-files2/0/bluraydp-20130117155646.zip

  I unzipped and ran the .exe. InstallShield says ' build Version of the source is not build target.
  that looks more like something the programmers must have correced instead of
  that we poor users could see.

  Has anyone else you have the same problem?
  Preferably with solution ;-)

  TIA & best wishes

  Hello

  The package to install is only an update / patch.
  This package requires the installed Blu - ray TOSHIBA disk drive software.
  TOSHIBA Blu - ray disc player software is installed on your system?

  The exe file is to be found in:
  TOSHIBA\TOSHIBA Blu - ray Disc Player\SMIPlayer.exe

  If its not available or if the version does not match, the installation of the patch fails.

• Dvd player MediaSmart not working - when a Blu - ray Disc I'm invited to be updated, but even with the update it will not play.

  I have laptop HP Pavilion dv7-1260.  When I put in a blu - ray disc I'm propmted to get an update.  Even with the update, it will not play a blu ray.

   

  Hello

  ·         What is the update message that you receive?

  ·         Do you have an error message when you try to read the Blu - ray Disc?

  ·         This problem occurs only with Blu ray discs or any of the others?

  To play a Blu - ray disc, you must use a non-Microsoft program that supports Blu - ray playback and a device that can play Blu - ray discs.

  See the link below:

  http://Windows.Microsoft.com/en-us/Windows7/MPEG-and-DVD-video-frequently-asked-questions

• Blu - ray disc player no longer works

  I have a laptop Acer 7720 with blu - ray disc player, but the blu - ray disc player has stopped working!  I tried to open it in windows media center, but get the message "blu - ray play disc not installed program".  Acer will not help as they say it is a software problem and I have to pay for their help in this instance.  any other suggestions of "non-monetary"?  Help, please!

  Hello

  Step 1: Please make all underneath the same if you've done it before as it's often the total of the process which
  solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack. Even if the reader does not appear to continue below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary. See below.
  
  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD burning and)
  Playback of CD and DVD). Therefore, it is not unusual for 1 or 2 rooms with not so work that others do it properly.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are some registry entries
  that the troubleshooter does not, and those who "could" be the cause.

  Check with your system manufacturer Maker and device for possible firmware updates and the good
  Your player registry entries.

  Here are the keys in my opinion, are those in question - for the reader of CD/DVD subkeys of course that he will be
  other subkeys in these keys. Be sure to ask specific keys involved as well as the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even registry settings correct for your CD/DVD drive
  a person with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Check at Acer for drivers and firmware of your model type and number.

  Acer - USA - Service and Support - drivers
  http://us.Acer.com/Acer/service.do?LanguageISOCtxParam=en&CTX2.c2att1=25&CountryISOCtxParam=us&ctx1g.c2att92=447&ctx1.att21k=1&CRC=3618978704

  Acer - worldwide
  http://www.Acer.com/worldwide/selection.html

  Hope these helps.

  Rob - bicycle - Mark Twain said it is good.

• What kind of program do I need to play blue ray discs?

  Rachelle,

  I have a computer with windows 7. I know that microsoft is unable to read the blue ray on his progrm. My computer is abl to play the disc it has the good hardwear for her.

  What kind of program is best to install on the computer to read and play my blue ray discs and where can I buy it?

  You need Cyberlink Power DVD or something of that ilk to play Blue Ray

  http://www.CyberLink.com/products/PowerDVD/overview_en_US.html

• Preview works perfectly, Blu Ray disc is not - still Cs5.1

  Hi all

  I never had no problem creating blu ray front discs until one. I have a project created with no error reported when I check it. The chart seems good. The calendar is not crazy long names with spaces. The preview plays PERFECTLY! After burning a blu - ray disc project, I see that in a specific menu buttons do not work even if they are connected to the appropriate time. Also the FirstPlay which is a video short 20 sec will not play.

  Its driving me crazy cause ive never had trouble creating a blu - ray player before. Ive tried to play in three different actors and the same results.

  Am I missing something

  

  

  

  Import formats http://forums.adobe.com/thread/622722 can still help

• HP Pavillion DV7-1020us, BD - Rom does not play my Blu - ray discs. What should do?

  I have HP Pavillion DV7-1020us, but the BD - Rom not playing my Blu - ray discs. I can play the DVD fine, but I was never able to play Blu - ray discs. I keep an error saying "no program is installed to play Blu - ray discs in Windows Media Center" I also get a similar message with Real player. It is software somewhere on my computer that will help me to play Blu - ray? Thanks in advance for your answers.

  Thank you very much! That solved the problem. I re-installed Quickplay and then ran the updates. QuickPlay installed an update allow me to play the Blu - ray. Strange that the computer have not already installed software to play Blu - ray discs. Thanks again!

• XPS M1530 customization - what is a 'Slot Load Blu - ray Disc (BD/DVD/CD read/write) "?

  Hi all! I'm looking to customize my laptop so that it can play Blu - Ray movies. Is "Slot Load Blu - Ray Disc" the thing I'm looking for?

  Hello

  You want to buy a disc "Blu - Ray".

  You must make sure that you choose that has included software for watching Blu - Ray movies. 'Slot Load' means a player who is not a tray that pops out like a CD or regular DVD player don't. You just have to push the disc into the "slot". I saw some problems with the discs of "crack" and suggest a regular reader of plateau.

• Re: Satellite P755 - impossible to play 3D Blu - ray discs

  Hello

  My Satellite P755, Corel WinDVD which is preinstalled inside a. I can't play 3D blu ray discs. 2D works very well. When playing bluray 3d, I can hear all the sounds, but not vision, the screen goes black. I have nvidia 3d glasses, they activate normally; When the blu - ray starts (the sound is coming), but no vision I can get.

  When I open the laptop first, she was fine and worked without a problem but there were windows updates pending. I've updated all, but now I am facing this problem.
  Update could cause this? Or what can I do?

  Thank you Yves for this great tip!

• Windows XP 64 does support playback of Blu Ray discs?

  No matter what DVD playback software I use works on the regular DVD in my Blu Ray player; but do not seem to Blu Ray disc to function.  However, on Windows 7 64, they work very well.  No matter what patch available for Windows XP 64?

  Just so that we can be sure, that you say "any software dvd player", do you mean any software of blu ray, dvd and blu ray are different, please make sure that your software is able to read blu ray discs.

• My optiarc cant BD ROM BC-5500 ATA device read blue ray discs, it can only be read normal CD-ROMs. Please help :(

  Remember - this is a public forum so never post private information such as numbers of mail or telephone!

  Ideas:

  • You have problems with programs
  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  Always do a job - even in a first time?  If so, pilots may have been replaced by a Microsoft Update and maybe that's why it doesn't work anymore.  Check the drivers and see if there is an option to restore the drivers to a previous version (which may be supplied with the system when he worked).  If so, try the restore and see if that solves the problem.  Make sure that it not only reads blu ray disks but can read and burn CDs and DVDs as it should.  If not you can always just reinstall the drivers by unscrewing the restore and restore the drivers who were there before you started this effort and again to confirm that it still works except for playing blu ray discs.

  I don't see the point in HP brake a blu ray player that has no driver available for it - I have never actually heard of what happens with a manufacturer or the device installed on the computers they sell.  Someone at HP left dropped the ball big time on this one.  Maybe HP will give you a free exchange to another blu ray player they may have available for your computer making the drivers for it and who actually works like the one bought you is not - it can't hurt to ask.  Check the options first then you can ask to him who is of at least equal quality and is the same price, or maybe a bit more expensive - they can always be arranged because of the problem, they know exists.  I guess that it's still under warranty, so that shouldn't be a problem.  It's an option-, but the decision is yours.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.