What display of recommended controls run on the homepage?

Similar Questions

• What is nvvsvc.exe process running in the Task Manager?

  Hello - What is this nvvsvc.exe (v v w no) running in the Task Manager? Eatting a lot of memory, don't let me put an end to the process, won't tell me where it is located, (I opened to display all files and folders), I can't locate with search, I can't find it in: / c in System 32 files or 64. I ran WSE thinking it could be malware or a virus and came back clean. Am running Windows7 HP 64-bit sp1, IE8, WSE for protection. All updates are up to date with windows and WSE today. UT

  You have an nVidia graphics card? If so, the Sub page explains nvvsvc.exe:

  nvvsvc.exe to ProcessLibrary.com
  http://www.ProcessLibrary.com/directory/files/nvvsvc/433585/

  I hope this helps.

• How can I find what I need at startup of the computer programs, I went to the System Configuration, but do not know what to uncheck to stop running when the computer is started

  I ran a report on my computer, in case of problems.  It detected that I needed to verify in the Configuration of the system on the programs that were running at the start of the computer.  I have several here I will list who is here, and maybe someone can tell me that I don't need at start-up.

  1 Microsoft Security by Microsoft

  2 updater Java (TM) Platform SE Auto by Sun Microsystems

  3 Localnet Express 3.0 - propel Software Corp. (Localnet is my provider and this express is supposed to help my computer go to websites faster)

  4 Roc_Roc_NT_unknown-AVG safe search (I was told I didn't need AVG antivirus, so I deleted it out)

  5. default manager by Microsoft

  6 adobe Acrobat from Adobe Systems

  7 adobe Reader by Adobe Systems

  8 AVG Tray-unknown

  I hope someone can help me with this takes 15 min for a loading site approx. 30 to load the game after I finally get it, then the game is frozen and won't do anything.  Even for all other sites, I'm at my wits end and don't know what to do.  I have dial up and Windows 7.  Just started having problems after getting this new service provider.

  Hello Wanda.

  One command, but lets see what we can do to whittle the list down. First, dial-up internet connection is slow, so keep that in mind that we work here.

  Second, almost all your startup programs are valid and advised to load at startup of Windows. Some possible changes:

  (1) If you need not a specific to Java, such as might have the game that you are trying to play, so you don't need to have it is launched at startup.

  (2) regarding the Adobe programs, why do you have Acrobat on your computer? Do you need to create PDF files? Adobe Reader which has many freeware alternatives that are faster, used to read PDF files. So if you need only to read PDF files, you can stop Acrobat from loading at startup.

  (3) other startup programs are all legitimate. And remember, just because you do not start a program at startup, does not mean that you cannot start later if you find that you don't need it.

  (4) the problems you encounter to "all sites that you visit" could be a function of malware. You don't have AVG Antivirus running on your computer just? I recommend do you a scan in depth and then put in quarantine and remove any infections it finds.

  (5) after you run the virus scan, I suggest that you try to download and run these two scanners. First MalwareBytes' Antimalware, here: http://download.cnet.com/Malwarebytes-Anti-Malware/3000-8022_4-10804572.html.  Secondly, SUPERAntiSpyware, here: http://download.cnet.com/SuperAntiSpyware-Free-Edition/3000-8022_4-10523889.html. Quarantine and remove all infections they find.

  (6) after doing this, restart your computer and see how it works. Please post your results here, and if you have any questions during this process, post here and I'll help you. Let me know how you fare.

  Kind regards

  BearPup

• The effect of ICT controls runs off the screen and the chronology of control carried out does not follow

  I'm working on a video where I need to change the image very close key pairs. But it seems that ICT is running off the screen and does not follow along as the ICT in the project timeline.

  How can I make the effect controls, ICT and the timeline synch upward? I can use previous and next keyframes, but the view of the timeline does not follow along. He made the process quite slow editing because I have to constantly to the scroll box allows to adjust the view manually.

  There is no option for this scroll.  You will need to zoom out.

• I have a macbook, serial number: L88 * P2, boot rom version: MB41.00C1.B00 Macbook's battery of dead. " What is your recommendation?  I change the battery how much he beds?

  I have Macbook4, 1, intelcore 2due, 2.4 ghz, 4 GB memory, 3 mb L2 cache, 4 GB of memory, my macbook's battery of dead. "  How can I change my battery? Is my model on change or retrieve list? If this is not the case, how much money costs to chnge the Popol?

  < personal information under the direction of the host >

  Research on Amazon , there are a variety of spare batteries. The only brand name, I knew is Anker. Their battery cost about $53 (US) eBay can be another place to look.

  There is the world of calculation of other slightly more expensive batteries (~ $90 {U.S.}) but they have the choice of the color if it is important to match your computer's battery. OWC has a good reputation.

  I found on sale at Apple spare batteries, but I only looked quickly.

  Glendon Dick

• When I close thunderbird is still running in the background and always using data?

  I'm with an internet provider that has limited use of data per month. If I close Thunderbird when done using it it is still running in the background and using the data or is it closed here for not to retrieve messages or using the data?

  When you close Thunderbird, it cannot check or retrieve new messages.
  Not sure what you mean with "always running in the background.
  When you close Thunderbird is closed. Period.

• my blue tooth has never worked on my laptop (studio) running vista, the program is in the Panel and rises, but can't find anything and the custom of parameters come what can do?

  That came with the laptop program I never used it until now.

  Hello

  Check with the system manufacturer's support, their documentation online and ask for their
  Forums (if any) for known issues.

  =====================================

  If supported these could help.

  Hardware devices not detected or does not work - a Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  The problems with Bluetooth devices
  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Bluetooth-enabled-devices

  Set up a Bluetooth compatible device
  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-Bluetooth-enabled-device

  The problems with Bluetooth devices
  http://207.46.197.98/Windows/en-in/help/11a74104-645D-40D4-b933-bde5d15537bb1033.mspx

  How to set up a Bluetooth connection
  http://www.vista4beginners.com/how-to-setup-a-Bluetooth-connection

  The Bluetooth item in Control Panel on a Windows Vista SP2 computer does not
  as expected when you click on the element - for Windows 7 this check manually
  http://support.Microsoft.com/kb/960531/en-us

  If you need drivers try the support site for the manufacturer of your system and/or the site of the manufacturer of the real device.

  BluetoothView is a small utility that runs in the background and monitor the activity of Bluetooth technology
  devices around you. For each detected Bluetooth device, it displays the following information:
  The device name, address Bluetooth, Major Device Type, minor device Type, first detection time,
  Last detection time and more. BluetoothView can also warn when a new Bluetooth device
  is detected, by displaying a balloon in your bar tasks or playing a little beep. -FREE
  http://www.NirSoft.NET/utils/bluetooth_viewer.html

  BluetoothCL is a small console application that transforms all differential of bluetooth devices detected in
  the standard output. For each Bluetooth device, the following information is displayed: MAC
  Address, name, Major Device Type, minor device Type and possibly the name of the company of
  the device (if the external file of MAC addresses - oui.txt is provided) - FREE
  http://www.NirSoft.NET/utils/bluetoothcl.html

  ---------------------------------------------------------------------

  Add a Bluetooth device to your computer
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-enabled-device-to-your-computer

  Add a Bluetooth device or other wireless or network device: frequently asked questions
  http://Windows.Microsoft.com/en-us/Windows7/add-a-Bluetooth-or-other-wireless-or-network-device-frequently-asked-questions

  ---------------------------------------------------------------------

  More information of possible interest to some:

  What is a Bluetooth personal area network (PAN) network?
  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-Bluetooth-personal-area-network-Pan

  Connect to a Bluetooth personal area network (PAN) network
  http://Windows.Microsoft.com/en-us/Windows-Vista/connect-to-a-Bluetooth-personal-area-network-Pan

  I hope this helps.

• Error when you try to play a DVD: Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

  Windows Media Player help

  I bought a netbook and have an external CD drive to dvd. When I want to play the video, I get this error.  I can't find a solution.  Any Advisor.  Error is... Windows Media Player cannot play back the video DVD. You may need to adjust your Windows display settings. Open display settings in Control Panel, and then try to lower your screen resolution and color quality settings.

  Hi Rains27,
   
  1. were you able to play the same DVD sooner?
  2. must arrive with a particular DVD or all of them?
  3. do you have a DVD decoder installed on your computer?
  4. you use starter edition of windows 7?
  5. What is the resolution on your computer?
  6. have you installed a codec on your computer?
  If you have installed a codec on your computer the I suggest you to uninstall the codec.
   
  Method 1:
  Try running Windows Media Player DVD Troubleshooter utility and check if this may help:
   
  Open the troubleshooting Windows Media Player DVD Troubleshooter by clicking the Start button, then Control Panel. In the search box, type troubleshooting, and then click
   
  Troubleshooting, click View all, and then click Windows Media Player DVD.
  http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-DVD-Troubleshooter
   
  Method 2:
  
  
  
  Play a cd or DVD in windows Media player
  http://Windows.Microsoft.com/en-us/Windows7/play-a-CD-or-DVD-in-Windows-Media-Player
  
  Method 3:
  
  Try to reduce the hardware acceleration again and check if it makes a difference.
   
  a. open the screen resolution by clicking the Start button, Control Panel, and then, under appearance and personalization, click on adjust the screen resolution.
  b. click on advanced settings, troubleshoot tab and then click on change settings.
  c. move the hardware acceleration slider toward none to reduce or turn off video hardware acceleration.
  d. click OK and then click Restart now.

  For more information, see this link: thanks and regards:
  I. Suuresh Kumar - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.
  

• Display background running on the UI threads

  Hello

  Sometimes I get the situation, that an action of the user needs time to perform. So I put this work to a task or Service.

  I want to inform the user, that its action is still ongoing. Just a simple ProgressIndicator.

  I know how to do it with a single task, but theoretically, there could be multiple tasks running, even some who were not triggered by the action of the user.

  So I want a similar thing as in Eclipse or IntelliJ: a 'background' control, which displays all running threads.

  Y at - it an easy way to do it, I mean from the perspective of Service/task/Thread, not the user interface.

  Do I need to record each scheduled thread that I start control, for example, when it is scheduled?

  Should I derive from task to make this logic?

  Is there a way to "look" all discussions?

  What is the best approach?

  My idea was to add each task to the control. And control of listening to the property running. When it is finished, it is removed from the list of observable controls.

  But what of the simple Threads, which can be started somewhere outside the Thread of the JavaFX Application?

  For the more general part of the question (of Threads that can be lit outside the Thread of the JavaFX Application):

  I've never worked with this part of the Thread API, but the Threads belong to the ThreadGroups. You can retrieve the group that belongs to a Thread with Thread.getThreadGroup (). ThreadGroups are hierarchical; each ThreadGroup except the top-level ThreadGroup has a ThreadGroup parent (ThreadGroup.getParent ()) and you can get references to all children with ThreadGroup.enumerate (ThreadGroup []) ThreadGroups. Wire also has a getState() method that returns an instance of the enum Thread.State.

  Of course, none of this is observable in the sense of JavaFX properties, so you should probably periodically this survey instead of being able to listen passively to state changes.

  For the easier part, a few ideas:

  I did something that is conceptually similar to what you're trying to do. I have a client-server application in which the data model communicates with a remote EJB service layer. All calls to the service layer are threaded. The model exposes an IntegerProperty represents the number of tasks that are pending (i.e. waiting to be executed or running). Most of the calls to the model to result in the creation of a task which the call() method runs on the remote service. The relevant parts of the model look like this:

  public class Model {
    private final ExecutorService executorService ;
    private final IntegerProperty pendingTasks ;
    // ...
    public Model() throws NamingException {
      // ...
    executorService = Executors.newSingleThreadExecutor() ;
    pendingTasks = new SimpleIntegerProperty(0);
  }
  
    private void addListenersToTask(final Task task) {
    task.stateProperty().addListener(new ChangeListener() {
    @Override
    public void changed(ObservableValue observable,
    State oldValue, State newValue) {
    State state = observable.getValue();
    if (state == State.SUCCEEDED) {
    decrementPendingTasks();
    task.stateProperty().removeListener(this);
    } else if (state == State.FAILED) {
  task.stateProperty().removeListener(this);
    try {
    context.close();
    } catch (NamingException exc) {
    System.out.println("Warning: could not close context");
    }
    status.set(ConnectionStatus.DISCONNECTED);
    }
    }
    });
    }
  
    private void scheduleTask(Task task) {
    addListenersToTask(task);
    incrementPendingTasks();
    executorService.submit(task);
    }
  
    private void decrementPendingTasks() {
    if (! Platform.isFxApplicationThread()) {
    throw new IllegalStateException("Must be on FX Application thread");
    }
    if (pendingTasks.get()<=0) {
    throw new IllegalStateException("Trying to decrement non-positive number of pending tasks");
    }
    pendingTasks.set(pendingTasks.get()-1);
    }
  
    private void incrementPendingTasks() {
    if (! Platform.isFxApplicationThread()) {
    throw new IllegalStateException("Must be on FX Application thread");
    }
    pendingTasks.set(pendingTasks.get()+1);
    }
  
    public int getNumberOfPendingTasks() {
    return pendingTasks.get() ;
    }
  
    public ReadOnlyIntegerProperty numberOfPendingTasksProperty() {
    return pendingTasks ;
    }
  
    // ...
  }
  

  All jobs are scheduled to run by calling the scheduleTask (...) method above, which increments the property pendingTasks, and adds a listener to decrement it when it is finished. The only way for tasks to fail in this application is whether the remote service goes down (the other exceptions are thrown by tasks), this is why I close the naming failure context, and there is currently no functionality to cancel tasks. The code will have to change to meet the cancellation or failure, if this isn't the case.

  Of course, you could do more than a simple counter here using similar techniques. For example, you could keep a ObservableList for the tasks, add a task to the list when it is submitted and remove it when it is finished. Then, you could provide this list to control which can display the status of each task.

  Another option could be to write a wrapper for ExecutorService that has implemented this feature, rather than to implement in your model. (I can elaborate a little if it is not clear, but I have not actually tried it myself). If you somehow exposed this wrapper ExecutorService to the entire application and used for all your threading (which he is called to leave FXApplication thread or not) then you could at least be aware of these threads and should be able to monitor their relatively easily. All threads that were not executed via your wrapper ExecutorService would still be difficult to control.

  Not sure how much help that is.

• What can I do to make the Satellite A665-S6086 run with the new memory?

  I was able to update the BIOS for my Satellite A665-S6086 by updating 2.30 on CD burning. I have Windows 7 64 bit. I needed to update the BIOS, because I upgraded my RAM/memory of 2 GB (4 GB total) two cards two cards of 4 GB (8 GB total).

  My question now is when I start my computer with the new RAM/memory (two cards that are KTT-S3BS / 4G Kingston DDR3 1333 MHZ SODIMM SGL RANK), it freezes on the screen from Windows startup. Then when I hold the power button to shut it down and restart it, it wants to start using Windows repair but then crashes again. When I put in the memory of the old man and he start up, it starts the Windows repair and runs normally.

  What can I do to make my computer run with the new memory?

  I thank very you much in advance!

  What you can do?
  Buy an another RAM modules that are fully compatible with the laptop.
  It seems that you want to use the RAM modules which are not totally compatible and therefore the system hangs.

  By the way: the CPU that is used in this notebook runs the DDR3-800 and DDR3-1066
  RAM modules.
  http://Ark.Intel.com/products/49020

  I would not recommend to use the modules of DDR3-1333 but PA3677U-1M4G 4 GB DDR3-1066

• Is there anything I can recognize what image runs in the plate sequence?

  Hi all

  I would like to know if there is a way I can recognize what image is running in the plate sequence?

  If I have five images in the sequence of flat, I want to keep track of each image in the façade visually. I use LV8.2

  Thanks in advance for your answer.

  Yoon

  You could put a local variable in each image and update that with a constant. Of course, it is really bad application and I highly recommend to develop a state machine architecture given that what you are doing are NOT the right way to program in LabVIEW. For a model, go to file-> New... and take a look on the State Standard computer in the directory of design patterns.

• "Windows cannot display the control volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel. »

  missing volume control

  volume control was gone. I tried to go into my control panel to use it, but I get an error that says:

  "Windows cannot display the control volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel. »

  I have lost my Windows XP disc in a move and can't reinstall the file to a disk, how to fix this?

  When you use certain features sounds and Audio devices, you see a message like this:

  Windows cannot display the control of volume on the taskbar because the Volume control program has not been installed. To install it use Add/Remove programs in Control Panel.

  It seems that the c:\windows\system32\sndvol32.exe file is missing.

  This may occur if your antivirus/antimalware application thinks the file is suspicious and quarantines (effectively delete) the file.  You can replace the missing file with a backup copy of the file that is in another folder on your system.

  Describe your current antivirus and software anti malware situation: McAfee, Symantec, Norton, Spybot, AVG, Avira!, MSE, Panda, Trend Micro, CA, Defender, ZoneAlarm, PC Tools, Comodo, etc..

  Assuming that Windows is installed on your C drive...

  We know that XP keeps copies of critical system files in the following folder:

  c:\Windows\System32\dllcache

  Using the Explorer, search for or navigate to the following folder:

  c:\Windows\System32\dllcache

  Locate the sndvol32.exe file, right-click, choose copy (it copies the file to the Windows Clipboard).

  If your Solution Explorer settings are not set to display file extensions, you will see only a file called 'sndvol32' which has an icon that looks like to the volume control slider (this is the file you need).

  If the file is missing in the dllcache folder, look for a copy of the file in this folder:

  c:\windows\ServicePackFiles\i386

  Browsing from a level in the following folder:

  c:\Windows\System32

  Right-click on an empty area in the window of c:\windows\system32 and choose Paste to paste in the missing file where it belongs.

  Answered in the affirmative if invited to replace the existing file.

  Now try your features sounds and Audio devices.

  Note that run sfc/scannow will not replace the missing file because it is not this that sfc/scannow does.

• Everything on my XP request too what program to run and the absolotly nothing works

  Everything on my windows XP application too what program to run and the absolotly nothing works has a virus and removed and that's how he left me nothing works virus disappeared, but all that happens when I try to open anything is what program I select the program, it must be running and then it asks which program to run again with this thing I just want to reset or repair but I can not even Get factory reset to work cause the recovery disks don't download help me please?

  more old XP and tried to use just the hidden reset the score at the factory, but apparently its not still installed, it's a nightmare, nothing works at all the

  Example: I try to open itunes shortcut fail... what program you want to run this with... Browse, go to itunes, click on the main iTunes or any other program folder so she asks what program you want to run this with and so on and so fourth and it does with absolutely all programs on my computer

  Example 2:i tries to go to the control panel to use anything, and almost all alone there is an error no internet Explorer doesint work go if I'm going in, it just stops, but I can't go to google... and all that fun stuff

  no idea on how to solve this problem would be insanely useful thanks

  Windows XP file Association problems
  http://www.dougknox.com/XP/file_assoc.htm
  EXE file Association problem (association of default restore for EXE files)
  LNK (shortcut) file Association Fix (restores default shortcut behavior)
  HTM/HTML Associations (Restore the default associations for htm/html files) and/or
  URL file Association problem (restores default associations for URL - Internet shortcuts)
  COM file Association problem (restore the default associations for COM files) - thanks to John Hanney
  Difficulty of file Association (restore the default associations for BAT files)
  CAB File Association problem (restore the default associations for CAB files)
  CPL file Association problem (restore the default associations for CPL files)
  COM file Association problem (restore the default associations for COM files) - thanks to John Hanney
  Directory Extension difficulty (restores default HKCR\Directory)
  EML file Association problem (default restorations for the EML files)
  EXE file Association problem (association of default restore for EXE files)
  File Association problem (restore the default associations for file folders)
  HLP file Association problem (default restore for HLP files associations)
  HTM/HTML Associations (Restore the default associations for htm/html files)
  ICO file Association problem (restore the default association for ico files)
  INF file Association problem (restore the default binding for the INF files)
  Internet Explorer Desktop Icon problems (restore the default behavior for the desktop IE icon)
  Difficulty of Association JPE/JPG/JPEG (restore the default associations for jpe/jpg/jpeg files)
  LNK (shortcut) file Association Fix (restores default shortcut behavior)
  MPG/MPEG File Association problem (restores default associations for MPG/MPEG files)
  MSC file Association problem (default restore for MSC files associations)
  MSI File Association problem (default restore for MSI files associations)
  MSP File Association problem (default restore for MSP files associations)
  REG file Association problem (default restore for REG files associations)
  SCF file Association difficulty (default restore for SCF files associations)
  RCS File Association problem (default restore for SCR files associations)
  TXT file Association problem (default restore for files TXT associations)
  TIF/TIFF File Association problem (restores default associations for TIF/TIFF files)
  URL file Association problem (restores default associations for URL - Internet shortcuts)
  VBS file Association problem (restores default associations for VBS files)
  ZIP file Association problem (restores default associations for ZIP - file REG folders)

• display zip files... what should I do now to see the content of my zip file?

  Sir ihave downloaded songs on the internet that is downloaded as a zip file format... and I have change the path of the zip opening and is open with internet explore form.and, now when I open my file zip my scenn begin to blink heavlyy after that I have to do my computer turn off or restart...

  What should I do now to see the content of my zip file?

  Please help me...

  You must extract the files zip first and then open it with a program that can open that particular file type.  So in this case, even if you use Internet Explorer to download files, you must use Vista to extract to the desktop (downloads or music where ever you choose) by right-clicking on the download, unzip the folder and create a new folder with the decompressed files and then you can use WMP or any program you use to play the songs.  But it does not work because of the changes that you did - but we can fix that easily enough.  It happens quite often with many different programs (ZIP especialliy because a lot of people care less about the ZIP of Vista program and cause problems in trying to change).  I suggest that you pay attention to what we're about to do what it will be probably useful more than once to you later for other types of files (I use it often, but I use it often when I install a new program and do not have default values, he created).  Although the first procedure is for most of the types of special system files and so generally used only for repairs (with the exception of ZIP), the second (if you actually need to use it) works with all other types of files.  I recommend that you create a new folder in the Favorites, called "File Association Changes" and add these links so that they will be easy to find if you need again.

  Here, the first thing we need to do is Zip file association fix it back to Vista of Internet Explorer.  Go to:http://www.mydigitallife.info/2008/06/22/reset-and-fix-broken-windows-vista-file-ext-and-type-associations-include-exe-com-sys-zip-lnk-folder-drive/ and scroll down to ZIP and then click or double-click on it to run the program that will reset the association back to its default values.  If you don't like the Vista Zip program, I recommend trying 7 - Zip free but excellent:http://www.7-zip.org/.  If you wish, set as the default zip file by using the following:http://www.mydigitallife.info/2008/06/20/how-to-edit-or-change-file-type-or-extension-associations-default-programs-in-windows-vista/.  If you wish, you can add send to 7 - Zip to the right-click context menu as follows:http://www.vistax64.com/tutorials/67599-send-context-menu.html.

  Once, when you find a zipped song you want, download it to the desktop or wherever you choose and use the 7-Zip program (depending on what you set as the default value) is the Vista to unzip the file, and then save the decompressed everywhere song where please.  You will now be able to play with any player you who manages songs with this type of file (if you click twice on the song, it should open the default program and start playing automatically).  Now you can do what you want with the original zip file you have now the actual file - you can save it if you want (although I don't see why you need to do when you have the actual file) or you can simply remove as needed.

  That's all. The problem should be solved and you must use the program ZIP Vista or 7 - Zip to unzip all zipped files or folders (downloaded or received as attachments to emails, or transferred by a flashdrive or however obtained).

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• System cleaned after the attack of virus/malware using 6 recommended tools - 90% of the system is back to normal, but most of the options in the custom of open Control Panel!

  The system was attacked by a virus/spyware. Microsoft Security Essentials has been installed after that - it found nothing after a comprehensive analysis. Malwarebytes Anti-Malware has been installed, it is the largest part of it and removed. Norton 360 has found rest. SuperANTISpyware has also been installed and this has also nothing after a system scan. Then ATF Cleaner and CCleaner were used to finish with what anyone else remaining areas may be temporary.

  So right now the system is more or less fine - programs running, the internet works etc. However when I open the control panel and click on a bunch of things for example Security Center, Sound, customization etc - they open habit. You see that the cursor turns into the blue circle for a fraction of a second and then more nothing. No window opens and closes or whatever it is. Now, I assume that the pieces of the virus/spyware are still active but with all tools using the latest definitions not being not able to find anything like that, I wonder if it's just a case of something having disabled those elements and not them reactivated after cleaning. The reason why I don't think it's something malicious is also because some options such as the Windows Firewall, the Manager of devices and programs and features open and work properly. Any other malicious software would certainly avoid these access as they could help shorten.

  Please help, thanks!

  Hello

  References to Vista also apply to Windows 7.
  
  Make sure that system is really clean before doing this.

  Follow these steps to remove corruption and missing/damaged file system repair or replacement.

  Run DiskCleanup - start - all programs - Accessories - System Tools - Disk Cleanup

  Start - type in the search box - find command top - RIGHT CLICK – RUN AS ADMIN

  sfc/scannow

  How to analyze the log file entries that the Microsoft Windows Resource Checker (SFC.exe)
  program generates in Windows Vista cbs.log
  http://support.Microsoft.com/kb/928228

  Then run checkdisk - schedule it to run at the next startup, then apply OK your way out then
  turn it back on.

  How to run the check disk at startup in Vista
  http://www.Vistax64.com/tutorials/67612-check-disk-Chkdsk.html

  --------------------------------------------------------------------------

  After the foregoing:

  What antivirus/antispyware/security products you have on your machine? Include everything you
  ever had including those that you uninstalled. (These can leave leftovers that can cause strange)
  questions.)

  Search all .cpl files most will be in "C:\Windows\System32" However, you can have
  others. Click on each of them at a time and see if it does not start - if so right click on it and
  Rename using cpZ as the extension is is to find it. Try Control Panel - if no Dungeon of joy
  try all the .cpl files. (Note that other people find other subfolders under C:\Windows should
  not be judged because they are not active.)

  Some of them are appwiz.cpl firewall.cpl, desk.cpl, powercfg.cpl, inetcpl.cpl, timedate.cpl and
  others.

  Icons do not appear in the Control Panel, or you cannot start Control Panel, the Welcome Center,
  or games in Windows Vista
  http://support.Microsoft.com/kb/936686/en-us

  The Control Panel window will not open in Windows Vista
  http://www.tips4pc.com/articles/Windows%20Vista/control_panel_window_will_not_op.htm

  =====================================

  If necessary:

  You can try an In-Place Upgrade (hopefully save programs and data) or a repair installation.
  Be sure to do a good backup or three.

  On-site upgrade
  http://vistasupport.MVPs.org/repair_a_vista_installation_using_the_upgrade_option_of_the_vista_dvd.htm

  This tells you how to access the System Recovery Options and/or a Vista DVD
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  How to perform a repair for Vista Installation
  http://www.Vistax64.com/tutorials/88236-repair-install-Vista.html

  Check with your system manufacturer that they all slightly different methods. They may have
  included a recovery Partition or other methods to restore the default value. As the manufacturer of your system
  We will sell you the physical disks cheaply since you already own windows.

  I hope this helps. Rob - bicycle - Mark Twain said it is good.