What field / class should I use to create a mobile rectangle?

Similar Questions

• What consideration we should have have before creating the tablespace

  Hello
  I was asked this question in an interview. I have a large volume of data (for example 80 GB). Now, I have to create a tablespace to contain these data. What consideration we should have have before creating the tablespace.
  In fact, I could not answer after a lot of research, so I post here.
  
  Concerning

  Hello

  In 10g, you must create a locally managed Tablespace (MEASURE of the LOCAL MANAGEMENT) If you know the
  size of your Tables/indexes you can choose the size of the scale with the option of UNIFORM SIZE.
  If you have small and large Tables / Index, then choose the AUTOALLOCATE option.

  It is recommended to use SAMS with the SEGMENT SPACE MANAGEMENT AUTO option and then the PCTUSED
  is auto tune by an internal algorithm and FREELIST are managed by a bitmap. With this option, it is best to
  be with the last group of hotfixes.

  About BIGFILE Tablespace, if you use BIGFILE tablespace, you will have just a data file which can extend up to
  4G block (thus 32 TB if you have db_block_size = 8KB). And SQL syntax allow you to manage the 'big' with data file
  the same command for the Tablespace.

  But you should care the limit of your OS. Imagine that your operating system or the file system does not support very largefiles then,
  you have no advantage over the use of Bigfile tablespace. Also, you might have more than 1 data file.

  Smallfile Tablespace using your data files should not exceed 4M block (so 32 GB for 8 KB / block) but you can have
  up to 1022 datafiles on your Tablespace. So eventually, if you use the 1022 data files, you have the same capacity
  Bigfile Tablespace and you can use several system files.

  To 80 GB with 3 or 4 data files, you can easily manage this volume. But of course from time to time you will have to
  Add a new data file.

  Hope this can help.
  Best regards
  Jean Valentine

• Satellite A200 - 23Q PSAE6E - what SATA driver should be used with Vista Pro

  What SATA driver for toshiba Satellite A200 - 23Q PSAE6E should be used for Vista is.

  Where can I find.

  Hello

  You need the Intel Matrix Storage Manger.
  This package contains the SATA drivers.

  Here is a link to the page from Intel:
  [Intel® Matrix Storage Manager | http://downloadcenter.intel.com/Product_Filter.aspx?ProductID=2101]

  Concerning

• What cluster algorithm should be used?

  I have several items of data in tabular form with all of the digital values under each attribute. I want to cluster data objects (or) I want to find the attribute class for each cluster labled.
  
  Please tell me, if I use k-means algorithm or should I use any other algorithm.

  the most well known of clustering are k-means algorithm that completely agree with objects and hierarchical. You will find tutorials for two clusters in http://people.revoledu.com/kardi/tutorial/index.html

• What function key should I use for the option about bootcamp

  Function key WWhat should I use to open option of bootcamp

  If you try to open the Bootcamp application, simply search for it featured in the top right corner.

  If you have already installed Windows and try to start Windows, turn off the computer and then turn it back on by holding the Option key. It should show unity of Bootcamp and the Macintosh HD.

• If I use a Canon S110 what sequence preset should I use for best results high def?

  Also if I am downloading these videos on YouTube, should I use preset in the export of the YouTube video? That will make my video look high def as well?

  For editing, the NEW ELEMENT of process will ensure that your sequence of Assembly corresponds to your video file

  CS5-thru-CC body/Encore tutorial list http://forums.adobe.com/thread/1448923 has a link to learn more about the process of a NEW ITEM

  Export to YouTube http://forums.adobe.com/thread/1451877?tstart=0

• What should I use to create the user interface of a CEAP plugin on mac

  Hey there,

  I'm new to the development of a plugin, but I did development of script for quite a long time however. I'm tring to develop an ECAP plugin. I go to the sample project of "Panelator" (from AE CC SDK), but I don't know how to create ui for the control panel plugin stuff.

  The sample project is not an example of code to do this on a mac computer, I found the code examle for windows however.

  So, can someone generously tell me how? I had to do with cocoa? But as I understand it, I can only use Objective-C to write cocoa ui.

  Thank you very much!!!

  Hi Li Zhiqing,

  We have just announced in the next major update to AE CC signs HTML5 is supported:

  http://blogs.Adobe.com/AfterEffects/2014/04/new-changed-after-effects-CC-2014.html

  This will allow to create the user interface using HTML5 and use your scripts for the conduct of AE.  It is quite a bit easier than the use of cocoa for the construction of the UI panel.  Thoughts?

• Pavilion HPE h8 - 1360t: what USB should I use to create recovery media from Windows 7?

  All the instructions/troubleshooting I had clearly said to avoid USBs that are compatible to Windows 8.
  Now the question is, is that the information simply obsolete? If I can't have a recommendation on which particular USB I have to use? Thanks in advance.

  KingFeather, welcome to the forum.

  Here is a Flash drive that I used to Win 7, 8 and 10 of Win Win.  I think that you need a drive that has at least 8 GB of free space.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• What file type should I use?

  Hi all

  Finally, I build my book. Using elements 10 as my first. My workflow starts by creating a new file (file/new/white)

  I just finished the first page and to make sure I saved it as PDF, PNG, and JPEG. When all pages are made I'll print locally. I think that JPEG will be useful and this first page is only 8MB. I have decided that my other type of file should be, who will be the file that print. The PNG and PDF files were 60MB each. Should I continue to record as both? I'll probably go back and re-edit as well. Thank you.

  You have two issues:

  In order to re - edit later, save it as a TIFF or PSD (elements native file format).  These file formats maintain your layers and masks, so a re-Edition is a snap.

  When it's time to print, talk to the print shop that you'll use and ask them what file format they prefer.  Most places can manage PDF files.

  Ken

• Tecra S10: What Docking Station should I use?

  My boss got a notebook S10-106 of the headquarters and would like to buy a docking station for this, please advise what compatible docking station.

  Thank you much in advance.

  Best regards
  Celia

  Hi mate

  I googled a bit and found information on the compatible ports replicators;
  You can use the Port Replicator II.
  It should be compatible with the Tecra S10.

  See you soon

• What channel configuration should I use: nickname?

  I have three terminals of signal; a, a V0 and a V1, with V0 and V1 measured relative to the ground terminal common ground.  There is some contamination of noise in the environment, so I can't ignore the field common and just wire V0 as the Center wire and the V1 as the "field..." I need the wire Earth for the shield.

  I want to measure V1 - V0.  I am writing a custom c# application.  It is important to keep as quiet as possible readings and keep the calculations as simple as possible (I know, use C++, not c#, not my choice).

  I think that my best option is to configure A0 to read V0 and A1 to read V1, as signals Pseudo-differentiels and then in my find code V1 - V0.  Is this correct? I read the post about the configuration of terminal on the Web site of NOR, but I want to just make sure.

  This perhaps relates to the question, but maybe not:

  I use an acquisition of data USB-9234.

  I don't need the sensor excitation.

  V0 and V1 are band including 10 Hz - 1 kHz with analog filters, low noise (slot 50uV), and the signal of interest is band including 65 Hz - 120 Hz.  Voltage max gnd - V0, V1 - V0 and V1 - gnd are all +/-5V.

  The signals are low impedance (~ 10ohms).

  Thanks for your thoughts!

  Hey jcsquire!

  You are using a configuration entry Pseudo-differentiels if you want to reduce your sound.  Username is very hard to minimize the ground loops that lead to more specific measures.  With the help of this configuration, I think you would have to measure both independently and deduct out them then maintain your sheilding with the soil line.

  In summary, it looks like you know what you're doing.

  Ground wiring diagram

  Entry Pseudo-differentiels

• What Adobe ID should be used during installation?

  I'm an admin CS6 installation for a user, and he wants me to activate with the identification code Adobe what are my info, or of the user?

  Of course, if the user has to enter again at any time during use, it should be them.  But, said that this leaves user my organization, without their account information how to disable the license of their ID card?

  I understand the desire link nicknames facilities, but need the ability to manage centrally as well, and I don't understand how these things fit into Adobe products now.

  I use 'some' CS6 programs, and after initial installation and activation, I must not enter any login to use my programs

  HOWEVER, read Cloud bought https://forums.adobe.com/thread/2089127 for ideas (see answer #1) for what you need to do to keep the race Update Manager

• What slot PCI should I use to install the Wireless PCI card

  I have a Compaq Presario CQ5210F desk top. I add a Sabrent PCI-G802-PCI-54Mbs, 802.11 wireless card g. I've read all the how info pages and am like that. The unit has 1 PCI Express x 16 & 2 PCI Express x 1 slots. Which slot is OK for this device and it is where or how can ensure me that I use housing appropriate?

  None of how information talks about it and I don't want to play and FRY my computer.

  You are the very welcome, and Hanspuppa is very modest.

  It is indeed an expert in the field.

  Paul

• What accessibility tools should I use in Windows Vista?

  Original title: accessibility + my hands hurt + having hard type

  What tools/tools accessability could I try to use, I had problems with both of my hands and arms. They were cramping and a lot more for several months. He was not a constant, but the frequency and length of time, that they were evil is most often. Either a loss of use of my pc for a long time, at least I don't have to use my hands a lot like now. Thanks for listening and I'm sorry to be a bother.  * E-mail address is removed from the privacy *. Deborah Cumberland, I feel as if I could understand that I have a progressive disease and he wants me as if my time on my PC has been shortened in duration. In fact, I've been falling asleep more often with my laptop on my PC. If you do not have an answer for me, I understand.

  Hello

  I suggest you go to the following Microsoft article and check if it helps.

  Sounds and speech:

  http://Windows.Microsoft.com/en-us/Windows/Help/Accessibility/sounds-and-speech

  Set up speech recognition:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-speech-recognition

  What can I do with speech recognition?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-can-I-do-with-speech-recognition

  Also see this article:

  Dictate text using speech recognition:

  http://Windows.Microsoft.com/en-us/Windows-Vista/dictate-text-using-speech-recognition

  Hope the information is useful.

• What GTX 960 should I use to upgrade my Dell XPS 8900

  I recently purchased the following Dell 8900

  X 8900-3756BLK Dell XPS desktop (6th generation Intel Core i7, 16 GB RAM, 2 TB HARD + SSD of 32 GB drive) NVIDIA GeForce GTX 745 with 4 GB DDR3

  I would like to replace the graphics card (I flight sim a lot) with a GTX 960 4 GB of DDR5 memory card, either myself or have a computer repair place do it.

  What are specific cards would be easier to install in my machine - if I get 960 GTX, I see all sorts of cards of different lengths, 1 and 2 fans, etc.

  I want to buy the next card, if it must be installed easily...

  Gigabyte GeForce GTX 960 4 GB GDDR5 PCiE graphics cards GV-N960OC-4GD

  A new graphics card would be difficult to install myself?   What is involved?

  Thank you

  Steve

  The 8900 XPS and 8700 share the same case so if you look in this thread, you will see the cards that match and cut cards requiring a certain case.

  en.Community.Dell.com/.../19611037

  I can personally attest to the MSI GTX 970 games 4 GB fits so check the size (length and height) and less it should fit without a problem.

  If you can wait a few weeks or perhaps a month, the GTX 1080 seems to be a surprising card to the prize draw and power. It's going to be a little more expensive, but much more capable.

  The installation is easy. search for youtube videos and you should find one.

  Edit: and you can sell your GTX 745 on ebay and recoup some of the cost.