What GTX 960 should I use to upgrade my Dell XPS 8900

Similar Questions

• Looking to update the graphics card in my Dell XPS 8900 EVGA GeForce GTX 960.

  I have a Dell XPS 8900 Special Edition that I bought a few months ago. I want to upgrade the OEM GeForce 745 of GTX that it came with an EVGA GTX 960.

  I have the Dell XPS 8900 (processor i7 - 6700 k), 32 GB of memory, 2 TB HDD + SSD of 32 GB m2, monitor cache Dell UP2516D and Windows 10 Pro. I'll add a second monitor Dell UP2516D soon and later add an SSD and move the OS and applications on.

  My needs are not at stake. I mainly business applications (MS-Office, including access and project), finance and investment, and a lot of photo and video editing.  Photo editing software uses the GPU if I update.

  EVGA has suggested either of the following, based on what would be good:

  http://www.EVGA.com/products/product.aspx?PN=04G-P4-1961-KR

  http://www.EVGA.com/products/product.aspx?PN=04G-P4-3963-KR

  These cards are almost identical except;

  #1 is long of 6.8 ", has 1 BIOS, 1 fan and use 128 watts for $160

  #2 is 10.1 "long, has 2 BIOS, 2 fans and consume 160 watts for $170

  I thought I would replace the graphics card myself, but once I opened the folder, I was wondering if the two cards will even fit.  I saw that other people have swapped their graphics card, so it must be possible.

  When I look in my case, the existing graphics card is a single location.  These two cards are double slot.  In addition, it seems that there are a few transistors just next to the existing card.  When you install a card double slot, the new map is just overlap the transistors under?

  Finally, in view of these two cards and the XPS 8900 case, is it possible to put the card in?  Is it worth the extra $ 10 earn an extra BIOS and fan, to the detriment of one more card of time and 12 watts?

  Any help or thoughts are greatly appreciated, thank you.

  Dual cards fit without any problem. Many have improved their 8900 XPS and 8700 with cards that need two slots of width.

  I prefer the models dual fan as they run cooler. They have a bigger heat sink and with relatively low heat from GTX 960, some are silent at idle because the fans do not work.

  For example, MSI GTX 970 son fan only above a certain temp that only happens every game. Maybe the EVGA card did the same thing. It is nice to have a quiet system at idle.

  Regarding the adjustment, the MSI GTX 970 games 4 G card Dimensions are (mm) 140 x 277 x 35. Length and height are tight but it fits without cutting.

  In addition, as noted speedstep you run SATA cables under the card. I replaced the SATA cables with longer cables, so they route toward the front of the box, then under the graphics card and upward.

  This thread has many cards different people have added. (the link is on page 26) and about the halfway point is my son with the MSI GTX 970 system, which (I think) is slightly larger that the EVGA 960 you listed.  It also shows the case mod to add a front fan.

  en.Community.Dell.com/.../19611037

• Satellite A200 - 23Q PSAE6E - what SATA driver should be used with Vista Pro

  What SATA driver for toshiba Satellite A200 - 23Q PSAE6E should be used for Vista is.

  Where can I find.

  Hello

  You need the Intel Matrix Storage Manger.
  This package contains the SATA drivers.

  Here is a link to the page from Intel:
  [Intel® Matrix Storage Manager | http://downloadcenter.intel.com/Product_Filter.aspx?ProductID=2101]

  Concerning

• What field / class should I use to create a mobile rectangle?

  Hello

  I want to create a rectangle that people can focus on, and when it's to the point, people can scroll to the left or right to move the rectangle left and right. What field or the object or the class should I use?

  Thank you!

  I noticed that too.  However, since the BB is double buffered, I'm not sure you save anything in fact.  As you move your rectangle, you would have to redraw where it was anyway.

  This treatment is all done in the paint of the screen method so effectively treats the screen as a large Bitmap.

  If you have created a field for yourself, you could add that field to a Manager, then use this Manager to place this field on the screen and then move.  In fact, it would be fairly simple.  But to do this, you must create a manager who knew how to move the field, then move the field whenever you wanted to move.  Then painting everything would be done by another person (i.e. the Manager and the field.)  In my opinion, costs, overhead and complication just to draw a rectangle of mobile, is excessive.  However if you plan to put different data in the Rectangle, such as text and therefore might want to use a real field of BB to help with its interior design.  To help you with this, I suggest you only consider these three KB articles:

  What is - BlackBerry UI hierarchy
  Article number: DB-00111
  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800505/800608/...
   
  -How to create a custom handler for a screen presentation
  Article number: DB-00117
  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800505/800508/...

  -Creating custom fields
  Article number: DB-00120
  http://www.BlackBerry.com/knowledgecenterpublic/livelink.exe/fetch/2000/348583/800332/800505/800345/...

• What function key should I use for the option about bootcamp

  Function key WWhat should I use to open option of bootcamp

  If you try to open the Bootcamp application, simply search for it featured in the top right corner.

  If you have already installed Windows and try to start Windows, turn off the computer and then turn it back on by holding the Option key. It should show unity of Bootcamp and the Macintosh HD.

• If I use a Canon S110 what sequence preset should I use for best results high def?

  Also if I am downloading these videos on YouTube, should I use preset in the export of the YouTube video? That will make my video look high def as well?

  For editing, the NEW ELEMENT of process will ensure that your sequence of Assembly corresponds to your video file

  CS5-thru-CC body/Encore tutorial list http://forums.adobe.com/thread/1448923 has a link to learn more about the process of a NEW ITEM

  Export to YouTube http://forums.adobe.com/thread/1451877?tstart=0

• What cluster algorithm should be used?

  I have several items of data in tabular form with all of the digital values under each attribute. I want to cluster data objects (or) I want to find the attribute class for each cluster labled.
  
  Please tell me, if I use k-means algorithm or should I use any other algorithm.

  the most well known of clustering are k-means algorithm that completely agree with objects and hierarchical. You will find tutorials for two clusters in http://people.revoledu.com/kardi/tutorial/index.html

• XPS 8910 uses the same motherboard as XPS 8900 (NVME SSD)?

  Does anyone know if the new round of XPS (XPS 8910) uses the same motherboard as the XPS 8900?  I am particularly interested to know if Dell has solved the problem of m2 which has paralysed mainly the use of the connector m2 only 1-way PCIE x instead of 4 x.

  (There are several discussions on this issue, see for example or )

  en.Community.Dell.com/.../19989764

  Need a new motherboard.

  

• Upgrading processor Dell XPS M1530

  I'm new here so please bear with my questions...: smileytongue:

  I have a dell xps m1530 with dual processor core to 2,1 G, Im planning to upgrade to a much more top 2. 4 g, are there problems I might meet by doing this?  I heard that change the processor must also change/update the BIOS...

  In addition, IM planning improve my 2G to 4G RAM memory. I was wondering if I just need to buy more memory 2G? Or do I have to buy 2 pairs of memories 2G? Please help me because I have not yet open to the lower part of my laptop.

  Thank you...

  
  

• Tecra S10: What Docking Station should I use?

  My boss got a notebook S10-106 of the headquarters and would like to buy a docking station for this, please advise what compatible docking station.

  Thank you much in advance.

  Best regards
  Celia

  Hi mate

  I googled a bit and found information on the compatible ports replicators;
  You can use the Port Replicator II.
  It should be compatible with the Tecra S10.

  See you soon

• What Adobe ID should be used during installation?

  I'm an admin CS6 installation for a user, and he wants me to activate with the identification code Adobe what are my info, or of the user?

  Of course, if the user has to enter again at any time during use, it should be them.  But, said that this leaves user my organization, without their account information how to disable the license of their ID card?

  I understand the desire link nicknames facilities, but need the ability to manage centrally as well, and I don't understand how these things fit into Adobe products now.

  I use 'some' CS6 programs, and after initial installation and activation, I must not enter any login to use my programs

  HOWEVER, read Cloud bought https://forums.adobe.com/thread/2089127 for ideas (see answer #1) for what you need to do to keep the race Update Manager

• What file type should I use?

  Hi all

  Finally, I build my book. Using elements 10 as my first. My workflow starts by creating a new file (file/new/white)

  I just finished the first page and to make sure I saved it as PDF, PNG, and JPEG. When all pages are made I'll print locally. I think that JPEG will be useful and this first page is only 8MB. I have decided that my other type of file should be, who will be the file that print. The PNG and PDF files were 60MB each. Should I continue to record as both? I'll probably go back and re-edit as well. Thank you.

  You have two issues:

  In order to re - edit later, save it as a TIFF or PSD (elements native file format).  These file formats maintain your layers and masks, so a re-Edition is a snap.

  When it's time to print, talk to the print shop that you'll use and ask them what file format they prefer.  Most places can manage PDF files.

  Ken

• What channel configuration should I use: nickname?

  I have three terminals of signal; a, a V0 and a V1, with V0 and V1 measured relative to the ground terminal common ground.  There is some contamination of noise in the environment, so I can't ignore the field common and just wire V0 as the Center wire and the V1 as the "field..." I need the wire Earth for the shield.

  I want to measure V1 - V0.  I am writing a custom c# application.  It is important to keep as quiet as possible readings and keep the calculations as simple as possible (I know, use C++, not c#, not my choice).

  I think that my best option is to configure A0 to read V0 and A1 to read V1, as signals Pseudo-differentiels and then in my find code V1 - V0.  Is this correct? I read the post about the configuration of terminal on the Web site of NOR, but I want to just make sure.

  This perhaps relates to the question, but maybe not:

  I use an acquisition of data USB-9234.

  I don't need the sensor excitation.

  V0 and V1 are band including 10 Hz - 1 kHz with analog filters, low noise (slot 50uV), and the signal of interest is band including 65 Hz - 120 Hz.  Voltage max gnd - V0, V1 - V0 and V1 - gnd are all +/-5V.

  The signals are low impedance (~ 10ohms).

  Thanks for your thoughts!

  Hey jcsquire!

  You are using a configuration entry Pseudo-differentiels if you want to reduce your sound.  Username is very hard to minimize the ground loops that lead to more specific measures.  With the help of this configuration, I think you would have to measure both independently and deduct out them then maintain your sheilding with the soil line.

  In summary, it looks like you know what you're doing.

  Ground wiring diagram

  Entry Pseudo-differentiels

• What accessibility tools should I use in Windows Vista?

  Original title: accessibility + my hands hurt + having hard type

  What tools/tools accessability could I try to use, I had problems with both of my hands and arms. They were cramping and a lot more for several months. He was not a constant, but the frequency and length of time, that they were evil is most often. Either a loss of use of my pc for a long time, at least I don't have to use my hands a lot like now. Thanks for listening and I'm sorry to be a bother.  * E-mail address is removed from the privacy *. Deborah Cumberland, I feel as if I could understand that I have a progressive disease and he wants me as if my time on my PC has been shortened in duration. In fact, I've been falling asleep more often with my laptop on my PC. If you do not have an answer for me, I understand.

  Hello

  I suggest you go to the following Microsoft article and check if it helps.

  Sounds and speech:

  http://Windows.Microsoft.com/en-us/Windows/Help/Accessibility/sounds-and-speech

  Set up speech recognition:

  http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-speech-recognition

  What can I do with speech recognition?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-can-I-do-with-speech-recognition

  Also see this article:

  Dictate text using speech recognition:

  http://Windows.Microsoft.com/en-us/Windows-Vista/dictate-text-using-speech-recognition

  Hope the information is useful.

• Upgrade the ultima of Windows vista to Windows 7 Home premium. Is there another product of Windows 7 should I use to upgrade Vista Ultima?

  I would like to upgrade without having to back up all my files.

  N °

  Read the info below and ask questions of Windows 7 in the correct Forums, please:

  http://www.Microsoft.com/Windows/Windows-7/get/Upgrade-Advisor.aspx

  Windows 7 Upgrade Advisor.

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  Railways upgrade to Windows 7 at the link above.

  http://www.Microsoft.com/Windows/compatibility/Windows-7/en-us/default.aspx

  Windows 7 Hardware/Software Compatibility Center.

  For any question on Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 Forum for questions on Windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner