What happened to reair disk permissions

Similar Questions

• What happens during a disk check?

  I recently receive messages to run a disk check at the beginning so I wonder what exactly happens during a disk check, how long it takes and what are you doing to stop in an emergency. I would also like to know the consequences of not doing it soon enough and what it does exactly.

  It only checks that each file is correctly written to disk by making sure that record of the file system matches the actual file (for example, the size of the recorded file and the actual size are the same).  It takes a lot of time to read all the files, that is why a CHKDSK process can take several hours (or more).

  CHKDSK scans are not necessary and should not be executed unless your computer has a problem.  The NTFS file system is a file system jounaling which is very resistant to errors and correct them if necessary.  It can handle the delayed write failures and power outages and will schedule controls when necessary. In most cases, running a check of your own is just a waste of time (and the use of unnecessary disk, which will reduce the life expectancy of your hard drive).

  You can finish it safely if you want, simply press Ctrl-C together.

• What happens if a disk in an ASM diskgroup fails?

  Hello

  I intend to build a server with the following configuration:

  Env: Oracle 11 g 2 (11.2.0.3), grid below 11 GR 2 (11.2.0.3) on OEL 64-bit

  For ASM starts, I will use external redundancy. I have a few questions:

  What happens if one of the disks in a diskgroup breaks down?

  Would he not available databases?

  I do a recovery of database?

  Please advise!

  Best regards

  Hello

  If RAID is configured correctly at the SAN level then no matter what failed disk will be transparent to both the database and the operating system and without recovery of the database will be required.

  It goes same for file and ASM system.

  Keep in mind that a disk as the operating system sees that it is in fact a UNIT number is usually spread over several disks on the SAN.  If a drive fails the SAN would be replaced by a hot spare, and the hot spare pool is maintained by the guys from SAN.  Also a host would have several cards HBA will multiple SAN switches and the SAN itself would have several hsarb HBA going to each of the swicth SAN, so you have redundancy all the way and not only at the level of the disc.

  Hope that makes sense.

• What happens to iCloud disk files when you reinstall the operating system

  Hello.

  So I thought I use iCloud drive to store files from work because I had to increase 50 GB due to miss the free 5 GB because of photos.

  But my doubt is what happens if my hard drive is going nuts and I install everything... With a new installation, what happens to the files? Download automatically? Or they are deleted on the server (since the new drive iCloud installation folder would be empty)? And can they be backed up with Time Machine? If so, if I get Time machine, it automatically retrieves files from iCloud drive?

  I'm sorry for so many questions, but these are important files.

  Thank you!

  The files are up in the cloud - iCloud!

• What happens if Disk Defragmenter is stuck on the 2 relocated pass

  What happens if Disk Defragmenter is stuck on 2-69% pass moved?

  Hello

  ·         What operating system do you use?

  Method 1:

  I suggest that you can run the disk check and check if you can perform disk défragmenterez.

  Check a drive for errors

  http://Windows.Microsoft.com/en-us/Windows7/check-a-drive-for-errors

  Method 2:

  Try disk clean and check if it helps:

  Delete files using disk cleanup

  http://Windows.Microsoft.com/en-us/Windows7/delete-files-using-disk-cleanup

  Method 3:

  If the problem persists I suggest you to put your system to boot and check if it works:

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Note: After troubleshooting, be sure to set the computer to start as usual as mentioned in step 7 in the above article.

• What happens to your computer when you compress your old files when running disk clean

  What happens to clean your computer when you compress your old files when running disk?

  Why is it you would compress the files while running a cleaning disc?  http://www.help2go.com/Forum/computer-help/105414-compressing-old-files-disk-cleanup.html

• What happened to my 10 GB of free space on the disk?

  I don't really know... Yesterday, I deleted a lot of films and albums of music from my pc and I am very sure that after I emptied the recycling bin, I had more than 31 GB of free space on the disk. But now... after that I just turned on my pc to start by knitting I noticed that my changed only 20.9 GB HDD space... what happened to the other 10 GB? No, I did not commit a any error with what I pressed on to empty the recycling bin and I even run windirstat just to check everything and I saw nothing wrong with all my files...

  IM using windows 7 ultimate sp1 with 100 GB hard drive (no partitions) 2 GB ram and 2.3 ghz cpu

  Hello

  Thanks for posting your query in the Microsoft Community Forums.

  I understand from the description of the problem, that after deleting a few files of the computer, the hardware space shows 20.9 GB despite 31 GB in Windows 7 computer.

  I understand this must be frustrating, but don't worry, we're here to help and guide you in the right direction.

  I suggest you try these methods and check if it helps.

  Try logging in SafeMode with network and check if the problem persists. If the problem is resolved, perform the scan anti-virus in SafeMode with network.

   

  Method 1

  Step 1

  Start your computer in safe mode with networking.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  Note: When, at the forefront of startup options select safe mode with network.

   

  Step 2

  I suggest you scan your computer with the Microsoft Security Scanner, which would help us to get rid of viruses, spyware and other malicious software.
  The Microsoft Security Scanner is a downloadable security tool for free which allows analysis at the application and helps remove viruses, spyware and other malware. It works with your current antivirus software.
  http://www.Microsoft.com/security/scanner/en-us/default.aspx
  Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
  Note: The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.

   

  Method 2

  Reduce the number of unnecessary files on your hard disk to free up disk space and help your computer run faster, use disk cleanup. It removes temporary files, empty the Recycle Bin, and removes a variety of file system and other items that you no longer need.

  http://Windows.Microsoft.com/en-in/Windows7/delete-files-using-disk-cleanup

  It will be useful.

  Let us know if you encounter problems with Windows in the future. We will be happy to help you.

• What happens on the free space of disks defragmenting the disc.when I used it is reduced. is this real case for all systems?

  What happens on the free space of disks defragmenting the disc.when I used it is reduced. is this real case for all systems?

  Defragmenter free space but can free report incorrect running after the space.

  Run disk cleanup before defragmenting...

• Trying to empty the trash.  After clicking on empty the trash.  An error comes up saying that this cannot be done due to the error 50.  Tried to check and repair disk permissions.  This finished.  Then tried to empty the trash again and got the same error

  I tried to empty the trash. After clicking on empty the trash. An error comes up saying that this cannot be done due to the error 50.

  Tried to check and repair disk permissions. This finished.

  Then tried to empty the trash again and got the same error 50 yet.

  I rebooted my macbook. When it restarted it flashed the apple logo, progress bar began to charge up to 15%, then the black and white code popped up for a few seconds, then a box pops up saying "your computer has restarted because of an error, press any key to restart." It is now is an endless restart loop.

  I can't go in safe mode or in disk utility.

  Any suggestions on what to try?

  Thank you

  What happens when you try to restart without danger as indicated to OS X Yosemite: start in safe mode

• What happened to my screensaver last week that I was asleep

  What happened to my screensaver last week that I was asleep

  It is perhaps went on vacation, or poorly received and wrapped up in hospital.

  Could you be a little more specific on the screensaver image

  in use or where the original was stored, if it was one of yours

  or an image of the system. If you have tried a disconnection from the system, or in

  another account user; or other general procedures to try to see if

  the system had a minor problem which prevented him from being used (?)

  Try safe mode if your Mac does not end commissioning - Apple Support

  You could start in safe mode, because this can sometimes solve a minor

  Pépin, then reboot normally. Could be that something is not load

  Getting started - or if you have not restarted the recent Mac, who can be

  help to solve these problems of user interface.

  {Start with OS X El Capitan, the permissions of the file system are automatically pro

  copyrights. It is no longer necessary to verify or repair permissions with disk utility.}

  There may be a problem here where a simple reboot to start in safe mode

  can help; or there may be other involved elements such as different

  applications, you have that may affect the OS X.

  Not knowing any more, I dare say that I wrote too.

  But who has stopped to me before...

• What happens if the PC I just downloaded Itunes on & connected to, does it display not all devices?

  What happens if the PC I just downloaded Itunes on & connected to, does it display not all devices?

  Hello 2sealadies!

  Thank you for joining the communities Support from Apple! Looks like you have a problem with your iTuens on Windows 10 not to recognize your iPhone. I know how important it is that the iPhone is recognized by iTunes. Read this article with steps If iTunes does not your iPad, iPhone or iPod. Specifically, after the first series of measures:

  If you are using a Windows PC

  1. Open Device Manager by following the steps for the version of Windows that you have:
     • Windows 10: Click the search box in the lower left corner, type Device Manager and press ENTER. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
     • Windows 8: loose in the right edge of the screen. Press search and enter the Manager devices, and then click Device Manager. If requested, enter your password. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
     • Windows 7: click on > Control Panel > system and Maintenance > Device Manager. If requested, enter your password. In the list under Bus USB controllers, find the Apple Mobile Device USB Driver.
  2. Even if you do not find the Apple driver, follow the steps below, based on what you see or don't see.

  The pilot and
  No symbols

  A down arrow
  by the driver

  Exclamation or
  question mark by
  the pilot

  No Apple Mobile
  USB device driver

  You don't see symbols next to the Apple Mobile Device USB Driver

  If you do not see , , or of the Apple Mobile Device USB Driver, look for third-party software conflicts. Then if you still need help, restart your Apple Mobile Device Service or contact Apple technical support.

  

  You see an arrow down

  If you see next to the Apple Mobile Device USB Driver, the driver with the right mouse button and choose enable from the context menu. Then if you still need help, contact contact Apple technical support.

  

  You see an exclamation point or question mark

  If you see or the Apple Mobile Device USB Driver, right click on the entry, then manually update the Apple Mobile Device USB driver.

  

  You do not see the Apple Mobile Device USB Driver

  1. Disconnect your device from your computer.
  2. Save a screenshot by pressing the Home button and sleep/wake button of the device button at the same time. The screen should Flash briefly.
  3. Reconnect your device to your computer.
  4. If you see one of these sections in the Device Manager, expand them:
     • Imaging devices
     • Other devices
     • Portable devices
     • USB Bus controllers

  Now, locate the entry that recognizes the device as a camera. You should see 'Apple IPhone', 'Apple iPad' or 'Apple iPod '. Right-click the device entry, and then manually update the Apple Mobile Device USB driver.

  If a single unknown device appears, follow these steps:

  1. Right click on the unknown device entry.
  2. Choose Properties from the context menu, and then click the Details tab.
  3. In the drop-down menu, select hardware IDS.
  4. If the ID begins with something other than USB\VID_0000 & PID_0000, go into the Device Manager and right click on the entry for device unknown, and then manually update the Apple Mobile Device USB driver.
  5. If the ID begins with USB\VID_0000 & PID_0000, then follow the remaining steps.
  6. Unplug the unit and remove all the USB devices on the computer.
  7. Shut down the computer, and then turn it back on.
  8. Reconnect the device, tests of each USB port for about 30 seconds to see if the device is recognized.
  9. Test with a different, checked 30-pins-USB or the lightning-connector-cable-USB, if they are available.

  If you still need help, contact Apple technical support.

  

  Manually update the Apple Mobile Device USB driver

  If one of the sections above directs you to this section, you should already have right click on an entry in the Device Manager. Now, follow these steps:

  1. Choose update driver software.
  2. Choose "Browse my computer for driver software."
  3. Choose "Let Me pick from a list of drivers for devices on my computer.
  
  
• Click the disk button. If this is not available, choose a category of devices such as Mobile phone or storage device, if in the list.
• Click Next. You should see the disk button.
• Click Browse and navigate to C:\Program Files\Common Apple Mobile Device Support\Drivers.
• Double-click the file "usbaapl. If you have a 64-bit version of Windows, this file will be called "usbaapl64". If you do not see here "usbaapl64" is not a Drivers folder, look in C:\Program Files (x 86) \Common Files\Apple\Mobile Device Support\Drivers.
• In the disc window, click Open, and then click Next and then click Finish.
• Windows installs the driver. If a message indicates that the software that you install "not passed the Windows Logo test", click on continue. You can get help with other common errors and the error code numbers in this Microsoft article.
• Open iTunes to make sure that iTunes recognizes your device. If not, Restart the Apple Mobile Device Service.

See you soon!

• What happened to my web content caching?

  What happened to my web content caching? Nothing there. Impossible to erase it.

  In case you use "clear history of Firefox closing:

  • do not delete the 'Cache' because Firefox will disable the cache disk in this case
  • Tools > Options > Privacy: history: [X] clear history of Firefox closing > settings
  • https://support.Mozilla.org/KB/clear+recent+history

  Note that compensation "Preferences of Site" clears all exceptions for cookies, images, windows pop up, installation of software and passwords.

• What happens to my hard drive using the 'sleep'?

  Hello

  Could u please let me know what happens on my drive hard when I put it in mode 'sleep'? It stops altogether? or maybe just slows down?
  WIndows 7 operating system
  Satellite A660 - 18

  A power saving of operation in which all unnecessary components are closed. Many devices running on batteries, such as laptops, supports a standby mode. When a laptop goes into sleep mode, it stops the screen and hard drive. Once awakened, the computer returns to its previous status of operation.

  Yes, the HARD disk stops altogether, but after turning on your laptop, you can continue your work.
  Launch multiple applications and use the key combination FN + F3 to mode 'sleep'. After a few minutes, press power button / stop and you will see what happens.

• What happens to my windows recovery 7 (d) when I do a "clean install" to win 8

  What happens to my windows recovery 7 (D on my HP Pavilion p6610f PC when I perform a "clean" Windows 8 install?)

  "Nothing happens" to the "D:\". "Partition recovery, except if you choose to delete or format during the installation of Windows 8. Note, however, that you will not be able to use the recovery directly from the screen of the BIOS partition / boot and inside Windows 8. Some have been able to 'mark' the 'active' partition and restart that should cause the system run the Recovery Manager. Your best bet is to make sure that you create your HP recovery disks prior to installing Windows 8.

  Please send Bravo

• What is this average, Disk Defragmenter has detected that chkdsk command is schduled to run on the volume: (C). Please run chkdsk /f.

  Been trying to run the defrag on my C drive and this message keeps coming up.

  When you try to defragment a volume of that Disk Defragmenter reports:

  Disk Defragmenter has detected that Chkdsk is scheduled to run on the volume: (c :))
   
  Please run Chkdsk /f.

  This means that the volume that you want to defragment was marked 'dirty' XP.  This is not necessarily all of the data has been lost on the volume, it simply means that XP thinks that the volume should be checked to find errors because of something that happened before.

  You won't be able to defragment the volume until the dirty bit has been removed.

  A volume can be marked as dirty, if the system underwent a power interruption (power failure, pulling plug, removing the battery, button / stop), abandoned restart or an abnormal termination.  One of these events?

  When XP starts, it automatically checks the bit of impurity on each volume.  You can also tell XP to ignore the bit of impurity on any volume, but this probably isn't a good idea in case there is a real problem that needs to be fixed.  If you have a hard drive where the dirty bit will not disappear, you can tell XP not to check.

  If the starting XP detects that the volume is dirty, it will be automatically run the check disk with error correction (chkdsk/r) and try to fix the problems detected.

  If the chkdsk command succeeds, it clears the dirty bit, and then you can defragment the volume.

  You can check the status of your bit of impurity from a command prompt window.

  To do this, click Start, run and enter in the box:

  cmd

  Click OK to open a command prompt window.

  For example, to query the bit of impurity on drive C, type:

  fsutil dirty query C:

  The sample output:
  Volume c is dirty
  Volume C: is dirty

  Is the volume of your sale or it is not dirty?

  Since XP of course already thinking that the volume is dirty, XP will automatically run chkdsk when it restarts to try to clear the dirty bit, in order to plan another running chkdsk can not help you much.  Sometimes the auto chkdsk on a reboot will be not only clear things to the top, but you can try it.

  I would like to start in the XP Recovery Console and run chkdsk /r from there you can actually watch and see what happens and decide what to do about this.  When own running chkdsk/r, it clears the dirty bit unless your HARD drive is somewhat distressed.