What happens to my boot camp T ^ T

Similar Questions

• Chaos of partition after you remove the boot camp partition

  Hello guys,.

  After that I was updating win10 with the new update... that was a bad idea... I tried to do a clean install of it.
  After failing to do so hard, im really stuck and don't know what to do:

  boot camp will not let me delete, they 3rd option is still grayed out. so I deletet with tool drive and tried to install win10 via boot camp several times - it does not work because that is always something worng with the partition I chose to install it.

  No, I think I really messed up my partitions and I don't really know what to do anymore, so I post this:

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 121,3 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage GB internal drive 121.0 disk0s2

  3: disk0s3 Apple_Boot Boot OS X 134,2 MB

  / dev/disk1 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * 1.0 TB disk1

  1: EFI EFI 209.7 MB disk1s1

  2: Apple_CoreStorage GB internal Drive 483,9 disk1s2

  3: disk1s3 Apple_Boot Recovery 650.0 MB HD

  4: Microsoft Reserved 16.8 MB disk1s4

  5: Windows Recovery 471.9 MB disk1s5

  6: EFI No. 104.9 MB disk1s6 NAME

  7: Apple_HFS 123 514,7 GB disk1s7

  / dev/disk2 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD + 599,0 GB disk2

  Logical volume on disk0s2, disk1s2

  1D528A9D-C552-417B-BF2A-C9C6AA49B5FD

  Fusion unencrypted drive

  / dev/disk3 (external, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: FDisk_partition_scheme * disk3 16.0 GB

  1: DOS_FAT_32 WININSTALL 16.0 GB disk3s1could help me

  Maybe someone can help me to get through this... I don't really know what it takes to "reset" my scores so I can again reinstall win10.

  iMac 5 k late 2014, 1 TB fusion drive, el capitan 10.11.6

  Disconnect external drives until Windows is completely installed.  If you are prompted for a USB key, use only a not a USB HDD, flash drive.

  You seem to have deleted the partition of BC using disk utility, which is not a good idea. Do not mix BC Assistant and disk utility.

  Perform the following two procedures after each failed attempt.

  Reset the management system (SCM) controller on your Mac - Apple Support

  How to reset the NVRAM on your Mac - Apple Support

  In the current state, disk1s4-disk1s7 should be merged into one FAT32 partition, if you want to re - use for BC/Windows.

• Boot Camp Windows does not show Macintosh HD in file Explorer what should I do?

  Hello

  I installed windows on boot camp 10 but windows file Explorer does not show my files on mac and I can't access them what should I do?

  You need to install the boot camp software in windows to get this working

• What are the capabilities of the boot camp?

  I am deciding if I should a new macbook pro and I was wondering what were the boot camp capabilities. For example, I would be able to download and run programs like Microsoft Office for Windows 10 using boot camp?

  The Boot Camp capabilities are the same as Windows would have on a PC with the same specifications.

  (140606)

• What windows and Boot Camp for MBP 13 end 2011

  I have a MBP 13 end 2011. I want to install Windows 8.1 to launch my CAD software. I use Boot Camp Assistant 6. I run on OS X and have 4 GB of ram. Is this ok or are there other options recommended?

  Models 13 inches have the GPU from Intel. Your Mac has an Intel HD3K. Older versions of the software may perform better, but more recent versions can be slower on older hardware. What is the possibility of using a dual-GPU MBP? The more RAM, the better it is.

• What happens if the master boot record to your computer is damaged?

  What happens if the master boot record to your computer is damaged?

  A. boot sequence would be lost

  B. the operating system would fail to start

  C. a series of long and short beeps will be heard when starting the

  D. the post OFFICE would not launch

  Hello

  True, and in many cases, it can be repaired:

  Try these from a Vista startup disk command prompt - type at the command prompt and press
  ENTER after each.

  Bootrec /fixmbr

  Bootrec /fixboot

  Bootrec /scanos

  Bootrec /rebuildbcd

  How to use the Bootrec.exe tool in the Windows recovery environment to troubleshoot and
  starting in Windows Vista problems
  http://support.Microsoft.com/kb/927392

  See this article here - to repair/rebuild using the Bootrec.exe tool Boot configuration data
  http://www.Vistax64.com/tutorials/163304-dual-boot-using-free-partitioning-software.html

  Sometimes using EasyBCD works when other methods are not.

  Recover the Vista or Windows 7 bootloader from the DVD
  http://NeoSmart.NET/wiki/display/EBCD/recovering+the+Vista+bootloader+from+the+DVD

  Recovering the Vista Bootloader with EasyBCD
  http://NeoSmart.NET/wiki/display/EBCD/recovering+the+Vista+bootloader+with+EasyBCD

  Repair the Windows Vista boot loader
  http://NeoSmart.NET/wiki/display/EBCD/repairing+the+Windows+Vista+bootloader

  If that works then run StartUp Repair twice the Vista boot disk, run once then
  Restart and then run again.

  I hope this helps.

• ESXi USB, what happens if you then remove the USB boot?

  Hello

  Someone in our team IT wants to use ESXi 5 bootable, i.e. start an ESXi host for a 2 GB USB flash drive in order to save the cost of buying the hard drives local to a RAID set.

  I know there are a few downsides to this, but one thing I wanted to know more precisely, it is what happens to the ESXi if you remove the USB or the USB drive goes down, while the host is running. The army continues to operate, as it will be charged the ESXi image in memory? Or it will fail if it cannot see the USB as it initialized from?

  Thank you!

  ESXi will work on - running some virtual machines are not affected.

  Usually, there should be no problem to plug new - but I have seen cases where the system does not start after a rough unplug - so avoid it.

• Boot camp unrecognized cross-platform records

  So here's a little history, I had an installation work of Yosemite and Win 7 ultimate running on my MacPro 3.1 beginning 2008, saw disks cross-platform with the standard read write limits, data was all mixed-platform so I decided to backup my stuff at the same time, wipe and do a clean install, I only have a disc of snow leopard OSX so I wiped and did a clean install with one of there , I noticed there was a worm even newer to avalible OSX install El Capitan then I updated level and attempted to do a training camp, although bootcamp and apples website says that my machine would support 7 when you enter the disk, he said I could do only a win 8 64-bit installation, I did not no more nor want to. It's jogging my memory that I had to modify the plist for the first time I did this, so I started to do some reading and what appeared to be the fastest workaround has been download a copy of bootcamp 4, because the new version does not support mixed installation of the iso (32 & 64 bit ver on one disc) did the installation went well spent ran boot camp software Player was not grateful so I tried to connect to the internet and there was a problem any appeared adapters but I just couldn't join the network and other issues at random so I started back in OSX deleted the partition and booted, this time networking the problem has been resolved but hard disk recognition was still a question , from windows I can openboot camp software and select this option to start card, but can not see the player mac, Mac I see windows on the desktop player but does not not in the utility disc or bootcamp and a target boot disk.

  Sorry for the long background but I seem not to be the only person having this problem perhaps this may help understand why its happening and lead to a better solution, aka prevent it

  Here is the info that you seem to need to read the other discussions on this topic

  I read the solution for the subjects to which I'm fairly certain that I'm having the same problem with and I am confident in preforming the required steps, like to confirm that, that is the question and what numbers should I use in my case for steps 7 and 8 and help is greatly appreciated.

  Thank you!

  Please after the release of

  sudo fdisk/dev/disk0

  sudo dd if = / dev/rdisk0s4 account = 1 2 >/dev/null | hexdump - C

• Windows 10 education and problems of Boot Camp 6.0.1

  I try to install Windows 10 on my (2.7/8 GB / 256 GB) 2015 13 "rMBP El Cap 10.11.2 running and I do not know how to do in this regard. The first time, I used a regular Windows 10 .iso and it for some reason some wouldn't let me put my education product key in. He told me to remove my USB which held the .iso image file and restart my Mac. Fact that, except it wouldn't let start me in the Boot Camp partition after. Deleted the partition and reformatted my main drive of OS X.

  On the second attempt, I downloaded the image file .iso Windows 10 real education of the official academic site of MSFT. I get into Boot Camp, search for the file, set the size of the partition and click on install. It is said he needs an .iso of 64-bit, which I guarantee I have downloaded, as the name of the file has x 64 in it. I tried installation + 5 times and now it keeps giving me this message: "Boot Camp only supports installation of 8 or a later version of Windows 64 bit on this platform." Please use an ISO for 64-bit Windows 8 or later installation file. "What's the problem? Do I need to install the standard Windows 10 .iso image file and then upgrade to education edition once I get to the desktop? It was only to take less than an hour, and now it's happening 2 hours!

  1. the MD5sum of the ISO, make sure it is not corrupted during the download.

  2. teaching can be problematic.

  3. after each attempt to install Windows, run

  Reset the management system (SCM) controller on your Mac - Apple Support

  How to reset the NVRAM on your Mac - Apple Support

  4. your model uses an OSXRESERVED partition, not a USB port. If the USB key contains the ISO (a single file, not a Windows Installer), copy it to your documents folder and let the BCA to serve. Do not open the ISO in the BCA process.

• Where did the Boot Camp partition goes after VMware?

  Hi all

  When I was with Boot Camp the last time, there was this partition called "Untitled" on my desktop Mac, which is the partition for Windows XP.

  After using VMware Fusion for the Boot Camp partition, the "Untitled" icon disappeared from my office.

  Can I know what happened to that partition?

  Thanks in advance for any help.

  A single operating system can control one partition at a time.  If the Boot Camp partition is disassembly of OSX and mounted in the VM when you start the virtual machine.  When you shut down the virtual machine, the Boot Camp partition should be resumed to OSX.

• Merge cannot make Boot Camp virtual machine: perhaps too many places of the VM?

  I get the error message, well known in the VM library window "Bundle" & lt; pathname & gt; "" / Boot Camp/%2Fdev%2Fdisk0/Boot partition.vmware.vm Camp "is damaged and cannot be opened."   However, my problem is not solved by the solutions proposed elsewhere in this forum.

  At the bottom of this post, I listed my host config and invited desired config.

  Here is a brief history, followed by what happened when I tried the solution of WoodyZ published here.

  • I had Windows XP Pro SP2 on my Boot Camp partition, but somehow ended up 'inaccessible' SigmaTel audio device and the Leopard installation DVD could not repair it.  I imported this partition to Boot Camp in the Fusion as a virtual machine.  This virtual machine is now stored on the external hard drive in "/ Volumes/ExternHFS/_CCCnonBackup/virtualMachines/Boot partition.vmwarevm"+ Camp.»  This virtual machine still works when loading in the merger, but the sound does not work, nor made a called M-audio Transit USB connector.  That's why I decided to create a new partition in Boot Camp with a SigmaTel audio device cool.

  • There are Kubuntu and NetBSD virtual computers stored in another default folder: yangguizi/Users / / Documents/Virtual Machines /

  • Using wizard Boot Camp in Leopard, I erased my Boot Camp partition and then recreated with a new installation of Windows XP Pro SP2.  (By the way, I've formatted this partition in NTFS.)  This Boot Camp partition is the device of SigmaTel installed and accessible from the control panel.

  So I wanted to make a virtual machine of the new Boot Camp partition.  When I opened the merger, I highlighted the new Boot Camp partition down and clicked on the arrow of comments are starting to the right.  A window saying "Vmware Fusion prepares your Boot Camp partition to run as a virtual machine.  This may take a few minutes.  This will be possible once. "That window remained open for 45 minutes.  Finally, I closed merge by clicking the choice of menu to quit Vmware Fusion.

  Thereafter, whenever I opened the merger, I saw the message "Bundle" / Users/yangguizi/Library/Application Support/VMware Fusion/Machines virtuelles/Camp/%2Fdev%2Fdisk0/Boot Boot Camp partition.vmware.vm "is damaged and cannot be opened.' " next to the new Boot Camp partition.

  When I highlighted this new Boot Camp partition in the VM library and you press the delete key, absolutely nothing changed, that I could see.  Right click on the list of this score showed that the menu choice 'delete' is gray.

  Then I closed the merger, and then manually moving the file to the trash "/ Users/yangguizi/Library/Application Support/VMware Fusion/Virtual Machines / Boot Camp / '.

  The next time I opened the merger, a new icon for the Boot Camp partition has been displayed at the bottom, with the subtitle "Powered Off".  When I clicked on the icon start Guest, a new folder/Boot Camp / was created in the same place, and the never-ending open window showing "Vmware Fusion prepares your Boot Camp partition to run as a virtual machine.  This may take a few minutes.  This will be possible once. " Blah, blah, blah.  If the cycle turned up.

  I am at a loss what to try next.  Here are three assumptions about the problem:

  1. Fusion has been confused by the three communities during which I virtual machines.

• Fusion has been confused by the fact that I have, potentially, two virtual machines called "Boot Camp partition".  The older is actually a virtual machine hard disk external.

• When I installed XP in the Boot Camp partition, the external Firewire drive was running. Then installing Windows saw much more of partitions on which XP could in theory have been installed.  This may have confused merge somehow, even if I successfully installed XP on partition C, which was 32 GB.

Did fix you this problem?  Even if you haven't, what do you suggest me I try next?

Thank you, Yang Guizi

Host hardware: 17 "MacBook Pro; 2.33 GHz cpu; 3 GB of ram; Boot Camp 32 GB partition formatted in NTFS. external hard drive with Firewire 800 interface, partitioned in an HFS volume + and an NTFS volume.
Host software: OS X Leopard 10.5.5; running VMware Fusion 2.0.1 build 128865; Tracks of partition Boot Camp newly installed Windows XP Pro with Service Pack 2.
Software comments: I would like to convert the Boot Camp XP Pro SP2 in a VMware virtual machine.        Running VMs with Kubuntu and NetBSD since the hd internal.

You can just get rid of the all/Users/lincoln/Library/Application Support / directory / Machines/virtual VMware Fusion; It should all be recreated. The virtual machine to help naos is than the pretreatment of Boot Camp. You don't want to get rid of all the of them, the only one in the specified directory. For example, there is a blank template in Applications/VMware Fusion.app whence that of your home folder.

• Where to download the drivers for Boot Camp (especially for the Apple TrackPad) 6.0?

  I have been using Apple TrackPad with a laptop work (published by company, Windows only) for several years now. Working recently been upgraded to Windows 10 laptop and TrackPad Apple seems to not work well.

  Is there anywhere I can download the boot camp 6.0 or more precisely that of Apple TrackPad driver pack?

  Please download the general of brigade (https://github.com/timsutton/brigadier). A Mac is easier, but it also works well on Windows, provided that you have installed some of the underlying software that brigadier needs. You must provide a model of Mac and it will provide a WindowsSupport.dmg for this specific Mac/model on which this trackpad is supported.

  What is the new Trackpad2 or the original Trackpad?

• How to install windows 8.1 using boot camp on sierra os

  Im trying to install windows 8.1 64 bit on my end 2011 MacBook Pro using boot camp.

  I downloaded the ISO from Microsoft file and saved it in the downloads.

  i boot boot camp and she has 2 activated options are: software DOWNLOAD to apple support and the other is latest windows install or remove windows 10 or later.

  I'm not sure why it says windows 10 as it is not compatible with my mac earlier. anyway I check the two options and then bootcamp download all drivers and records them in my pendrive of 32GB.

  He then asks me what hard drive partition and I choose but then it says: he cannot find the installation file. I tried opening the file so it is mounted, but nothing works. I thought it's supposed to tell you what to do?

  Thanks for any help

  A Mac 2011 needs a physical DVD to install Windows and need to use the optical drive (CD/DVD). You cannot use an external CD/DVD drive.

  Please burn the ISO on a DVD-R SL and then click the installation option only.

• partition boot camp disappeared after resizing Macintosh HD

  Hello

  I have a macbook pro with OS X El Capitan 10.11.6.

  I had a windows 8.1 installed on boot camp and ran out of space on windows, so I tried to extend the space by adding a new partition on mac and then merge on windows using the "minitool' but when I rebooted with now that the ALT key was not the boot camp partition...

  I then started the mac and changed the boot disk in boot camp and restarted and it gave me a message "there is no disk bootable..." or something like that.

  It's really important not to lose the windows and more important still do not have to format the new laptop please (because I had a similar problem before Re: Partitioning a Hard Drive Error on MacBook Pro)

  I tried to check for similar discussions but seemed to I'll do it is harder to resolve because I do not understand most of what is said and was afraid to do worse.

  Hello MayMedhat,

  I understand the partition Boot Camp have been adjusted and you are no longer able to access the windows on your MacBook Pro.  Because you cannot access side Windows of your Mac after setting, you must recreate your Boot Camp partition and reinstall Windows on your Mac.

  Set up Windows on your Mac partition
  
  

  Change the size of the partition

  It is not possible to change the size of the partition after installing Windows, but you can delete the partition and create a new partition to the correct size. Do not try to resize your Windows partition or a third-party application.

  How to install Windows using Boot Camp

  Please let us know if you need any additional help and thank you for visiting the communities of Apple Support.

  See you soon.

• boot camp and windows 10

  I'm trying to install 10 Windows with Boot Camp Assistant. I'm exactly as shown in all directions. I have a 2012 end iMac 21.5 ". It has a 1 terabyte internal hard drive. I've updated to the latest version of Mac OS x. I downloaded a legal Windows 10 professional image, although it seems not matter since I can't install it. Anyway. I followed all the instructions of the Boot Camp Assistant. I use an external hard drive for WININSTALL. Wizard Boot Camp works very well until it's time to create the partition on the hard disk called Bootcamp. It creates the partition, but does not do anything in this partition. Wizard Boot Camp attempts to boot from the new partition, but obviosly, there is nothing there. I tried to start the WININSTALL disc, who starts and wants to install Windows 10, but he cannot or will not be installed on the Bootcamp partition. You know what says the error message, because others have told you what he said, so I won't repeat. Obviously, Boot Camp Assistant does not use GPT, but rather of MBR to create the Bootcamp partition. I have tried many, many, many times to use Boot Camp Assistant to install 10 Windows internal hard disk, but each time he did exactly the same thing. I guess I'm crazy for trying to do the same thing so many times. Of course, there is something wrong with my iMac, because it seems that others are able to install Windows 10 on their iMac. So, would someone please tell me how to fix the problem so that I can install 10 Windows internal hard disk from the iMac?

  fronw wrote:

  I use an external hard drive for WININSTALL.

  You need a USB2 Flash 8 + GB drive. You may use an external HARD disk, it is still problematic.

  It creates the partition, but does not do anything in this partition.

  BCA is not supposed to, until the Windows Installer starts and copies the files to the internal drive to put Windows on the internal drive. WININSTALL contains all the files needed to install Windows.

  I tried to start the WININSTALL disc, who starts and wants to install Windows 10, but he cannot or will not be installed on the Bootcamp partition. You know what says the error message, because others have told you what he said, so I won't repeat. Obviously, Boot Camp Assistant does not use GPT, but rather of MBR to create the Bootcamp partition.

  EFI boot needs a GPT disk, the BIOS legacy mode needs a hybrid MBR (collection on a GPT disk standard). Your Mac 2012 preUEFI supports only the MBR properly. EFI boot not work correctly and cause driver problems.

  I guess I'm crazy for trying to do the same thing so many times. Of course, there is something wrong with my iMac, because it seems that others are able to install Windows 10 on their iMac. So, would someone please tell me how to fix the problem so that I can install 10 Windows internal hard disk from the iMac?

  Run the wizard of BC and delete the current partition. Disconnect the external storage, perform the following two procedures

  Reset the management system (SCM) controller on your Mac - Apple Support

  How to reset the NVRAM on your Mac - Apple Support

  Run the BCA and use a flashdrive USB2 (not a HARD drive). The USB key will be erased/formatted. The content of the ISO or Windows 10 DVD will be copied on this flash drive with drivers Apple supporting restart environment that supports your keyboard and mouse and display. Do not interrupt the installation in any way using the Alt/Option key.

  See also https://help.apple.com/bootcamp/mac/5.0/help/ .