Windows 10 education and problems of Boot Camp 6.0.1

Similar Questions

• I installed windows 7 on a mac with boot camp and then used parallels to create a virtual machine to run windows inside Mac os10.6. Now he says I need to activate windows again, but he said I need a new activation key. Any ideas would be appreciated

  I installed windows 7 on a mac with boot camp and then used parallels to create a virtual machine to run windows inside Mac os10.6.  Now he says I need to activate windows again, but he said I need a new activation key.  Any ideas would be appreciated

  Yes, you must purchase a full license for the second installation of Windows 7 product key.  1 activation allows only one Windows 7 product key.  Apparently, you now have a second facility that requires a second product key. Carey Frisch

• Windows 10 can be installed on Boot Camp Version 4.1

  Hello

  Windows 10 can be installed on Boot Camp Version 4.1? Whenever I do a page search thishappens which show how update but I have read that Windows 10 requires an updated Boot Camp (v6).

  Or better yet 6 Boot Camp out again? If so, how do I update my Boot Camp?

  FYI: that's what I did to get the version of Boot Camp, I went to my Windows partition click on icon Boot Camp and click on the button on Boot Camp and I got 4.1.

  I'm running Windows 7 on Mac OSX El Capitan.

  Any advice?

  If you already have installed W7 you can pass up to W10. Bootcamp may be necessary if you need to re - install W10. If your model of Mac is not listed in the link you found, Apple does not officially support W10 on your Mac, which means that there is no W10 driver certified for your model of Mac.

• Windows 10 could not locate the boot camp partition

  I'm trying to install 10 Windows on an iMac end of 2015 with a 512 SSD.  With the help of Boot Camp and an ISO of Windows 10, I am able to create the Bootcamp partition and the iMac restarts in the Windows of Windows installation. I enter my product key for my Windows 7 DVD and reach the screen showing partitions.  I select "disk 0 Partition 5 Boot Camp" partition and click on 'Format' according to the Apple support document.  The partition is then renamed to 'Drive Partition 0 5'.  When I select the next button, I get the following error message:- "we couldn't create a new partition or locate an existing one.  For more information, see the Setup logs files'.  The Windows Installer does not progress.  I deleted the partition several times using bootcamp and restarted the installation and always get the same failure.

  Any advice on how to install Windows would be greatly appreciated.  Boot Camp 6 will let me install Windows 7 on the iMac and so I need to use Windows 10.  I guess the Windows 10 ISO downloaded from Microsoft will work with the Windows 7 product key and Setup seems to accept it.

  Please, disconnect all external storage devices to your iMac and run the following two procedures.

  Reset the management system (SCM) controller on your Mac - Apple Support

  How to reset the NVRAM on your Mac - Apple Support

  and now try BC Assistant.

  See also Boot Camp: "we could not create a new partition or locate one" alert during the installation of Windows 8 - Apple Support .

• I update my windows 7 sp1 and etc., now boots very slow, also other application works too slow.sholud I unintall all updates?

  I update my windows 7 sp1 and etc., now boots very slow, also other application works too slow.sholud I unintall all updates?

  Hello

  1 are. what other applications you referring?

  I recommend you to uninstall Service Pack 1

  I suggest that you follow the steps mentioned below to refine the question causing third-party software (as applicable).

  Step 1:

  Test the issue in safe mode and check if the problem persists.

  Step 2:

  If your computer very well in safe mode functions, I would pt you your machine ├a State clean startup in order to eliminate conflicts of third party software.

  Note: Follow step 7 to restart your computer in normal mode

  See also: slow PC? Optimize your computer for maximum performance

• How to recover photos from Windows XP on an IMAC with boot camp?

  Original title: How do I recover photos

  I installed Windows XP on an IMAC with boot camp and ran "air display" for windows to have and the law on the IPAD as a second monitor.  According to me, the air display works with a wireless network and our wireless network was recently in and out.  I tried to get the monitor works and made a few changes when the screen went black.  I can move the mouse, but the screen is blank.  I turned off the computer and rebooted several times.  I can't get into the side the computer's Mac and it works OK, but nothing on the side of windows... I have some pictures saved on side windows that I would recover if possible.  Otherwise, I'll have to completely uninstall windows XP and lose the photos, then reinstall everything.

  Any suggestions?

  Hi snellen345,

  We recommend that you contact the Support team technique Apple for assistance.
  See the team support Apple

  Visit our Microsoft answers feedback Forum and let us know what you think.

• Windows 10 iMac 27 "el capitian Boot camp Installer could not move forward and the black screen appeared

  I have an iMac 27 "end 2015, el Capitian, boot camp 6.0. 10 64-bit pro Windows, everything goes fine until the last step when the Boot Camp Installer appeared, when I click Next, the screen is black... tried new facility twice, still stuck in the last step with the Boot Camp Installer then click Next, the screen become black... Please help!

  Some at Microsoft should lose their job (s) on that moment this crass brain freeze. Please remove the current installation of Windows, re-run BCA and create a new partition and you disconnect from the Internet before Windows Setup ask you where you want to install Windows.

  Please see installation problem w / 10 Windows on end 2015 27 "iMac retina as a reference.

• Disk space and lost partition boot camp Windows 10 El Capitan

  Was trying to install windows 10 for the first time and I am unable to locate the Boot Camp partition for the installation of windows after restart alt + in windows installer.

  Disk utility also shows missing 50 GB partition.

  Here are the:

  diskutil list

  Cs diskutil list

  sudo TPG - vv - r see the/dev/disk0

  sudo fdisk/dev/disk0

  dLast login: Fri Mar 18 18:08:26 on console

  WiFi-131-179-43-25: ~ list of Austin$ diskutil

  / dev/disk0 (internal, physical):

  #: NAME SIZE TYPE IDENTIFIER

  0: GUID_partition_scheme * GB 251,0 disk0

  1: disk0s1 EFI EFI 209.7 MB

  2: Apple_CoreStorage Macintosh HD 250.1 GB disk0s2

  3: disk0s3 Apple_Boot Recovery 650,1 MB HD

  / dev/disk1 (internal, virtual):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_HFS Macintosh HD GB + 199.0 disk1

  Logical volume on disk0s2

  9B55AED4-119C-44D3-90CC-735356BFD6C5

  Unlocked encrypted

  / dev/disk3 (disk image):

  #: NAME SIZE TYPE IDENTIFIER

  0: Apple_partition_scheme disk3 + 18,1 MB

  1: Apple_partition_map disk3s1 32.3 KB

  2: Apple_HFS Flash Player disk3s2 18.1 MB

  WiFi-131-179-43-25: ~ list of Austin cs $ diskutil

  CoreStorage groups of logical volumes (1 found)

  |

  + Logical Volume - Group 822D4439-B5F0-492F-927E-479F175CCDD8

  =========================================================

  Name: Macintosh HD

  Status: online

  Dimensions: 250140319744 B (250,1 GB)

  Free space: 50788065280 B (50.8 GB)

  |

  +-Physical volume BA074CDF-10E2-41F3-BCF1-1500780CE658

  |   ----------------------------------------------------

  |   Index: 0

  |   Disc: disk0s2

  |   Status: online

  |   Dimensions: 250140319744 B (250,1 GB)

  |

  +--> Logical volume family 94ABCFD9-91C2-4542-A81C-9954CA69F1CC

  ----------------------------------------------------------

  Type of encryption: AES - XTS

  Encryption status: unlocked

  The conversion status: complete

  High level queries: secure

  |                        Password required

  |                        Accepts new users

  |                        A visible users

  |                        At the Volume key

  |

  +--> Logical volume 9B55AED4-119C-44D3-90CC-735356BFD6C5

  ---------------------------------------------------

  Disc: disk1

  Status: online

  Size (Total): 198999932928 B (199,0 GB)

  Reversible: Yes (unlock and decryption required)

  Put the situation: Restart required

  Name: Macintosh HD

  Volume name: Macintosh HD

  Content indicator: Apple_HFS

  WiFi-131-179-43-25: ~ Austin$ sudo TPG - vv - r show/dev/disk0

  Password:

  See the TPG: / dev/disk0: mediasize = 251000193024; SectorSize = 512; blocks = 490234752

  See the TPG: / dev/disk0: PMBR to sector 0

  See the TPG: / dev/disk0: Pri GPT to sector 1

  See the TPG: / dev/disk0: GPT Sec at sector 490234751

  start index size summary

  0 1 PMBR

  1 1 Pri GPT header

  2 32 table GPT Pri

  34 6

  40 409600 1 part TPG - C12A7328-F81F-11D2-BA4B-00A0C93EC93B

  409640 488555312 2 part TPG - 53746F72-6167-11AA-AA11-00306543ECAC

  488964952 1269760 3 part TPG - 426F6F74-0000-11AA-AA11-00306543ECAC

  490234712 7

  490234719 32 table dry GPT

  490234751 1 dry GPT header

  WiFi-131-179-43-25: ~ Austin$ sudo fdisk/dev/disk0

  Disk: geometry / dev/disk0: 30515/255/63 [490234752 sectors]

  Signature: 0xAA55

  From end

  #: cyl hd s - cyl hd s id [Start - size]

  ------------------------------------------------------------------------

  1: EA 1023 254 63 - 1023 254 63 [1-490234751] < unknown ID >

  02:00 0 0 0-0 0 0 [0-0] unused

  03:00 0 0 0-0 0 0 [0-0] unused

  04:00 0 0 0-0 0 0 [0-0] unused

  WiFi-131-179-43-25: ~ Austin$

  It is your free space.

  Free space: 50788065280 B (50.8 GB)

  You will have to perform first aid on the drive to get it back.

• problem with Boot Camp, VMware Fusion 3, ethernet does not (not driver)

  Hello guys,.

  I have Windows 7 Pro 64 bit installed in Boot Camp and I'm running as a virtual machine using VMware Fusion OSX 10.6.6 3.1.2.

  The problem I have is that the ethernet does not work under VMware, even with VMware Tools installed.  Device Manager shows no driver installed.

  I googled and found a lot of suggestions to add ethernet0.virtualDEV = "e1000" to the simultaneous file, but I looked and this line is already there.

  I tried reinstalling VMware, VMware Tools, the Boot Camp drivers, NIC Add/Remove VMware settings, change NAT to the deck and vice versa. Nothing works.

  Any suggestions?

  The CARD is an Intel PRO 1000 MT and uses the E1G6032E.sys driver that is located in the:

  C:\Windows\System32\DriverStore\FileRepository\nete1g3e.inf_amd64_neutral_7f08406e40c6ede2

  You will need to copy the 3 files to a temporary folder or on the desktop to be able to access it from the device for a manual installation manager.

• Location and size of boot camp

  I'm on a 2015 15 "MacBook Pro with dedicated smart running El Capitan graphics card. I run software that requires Windows and seeks to implement the BootCamp to run Windows for the handful of times a month I need to use the software. My hard drive is a 500gig SSD, but I have only about 80 free concerts. I moved my iTunes and pictures libraries on a Thunderbolt 2 TB external drive. I have 1 TB free on this disk. My options are 1) using most of my remaining space internal to the BootCamp partition SSD, 2) using the external drive Thunderbolt or 3) a USB 3.0 128 GB Thumb Drive for the Boot Camp partition.

  Does anyone have suggestions about where would be the best place to put this partition? Or I'd better watch the virtual machines running off the external drive?

  Thank you.

  My recommendation is to 100 GB minimum for Windows and your Windows data. More if you have a lot of data. The Boot Camp partition must be on your internal drive. Read and follow the instructions of Boot Camp.

  A virtual machine is running.

• Windows 7 smaller size of the boot camp partition

  Hello world

  IM pretty new to mac and here next week, I want to buy the mbp 13 "retina 128 GB of storage. im a student of college and also the study, I might also want to play games and found that mac offer boot camp for w7. with my 128 GB of storage, which would be the smallest size of my partition w7, including some games total about 20 GB? 50 GB w7 partition would be enough?

  Thank you very much

  Hi Ashcroft:

  This is a technical note on installing Windows 7 on Bootcamp. Install Windows 7 and previous versions on your Mac with Boot Camp - Apple Support

  My personal opinion is that 128 GB is perhaps not large enough even without installing Windows 7.

  The new Macbook Pro is not really scalable. Memory is soldered in and the PCIe SSDS are very expensive. Also if you open the back of your computer to upgrade the SSD, you could void your warranty.

  If you read some posts there are a few from today on people who want to spend 500 GB SSD as they meed more space.

  So I consider getting more than 128 GB.

  Just my opinion.

  Kim

• I have a windows computer 7 and when I boot it says windows could not start then he normally open windows or repair.

  * Original title: windows startup

  Hi I have a windows computer 7 and when I start it up it says windows could not start then it says windows normally or repair I choose windows star normally and his coming as a code error 0x0000005c and I did they opsen others, but still the same error code I just wanted if I can back up my photos because they are good, or I can try to solve this

  Thank you

  The BIOS back to their default level settings.

  • Make sure that all internal cables, cards, and other components are installed and correctly.
  • Start your PC with essential hardware only.

  If no change:

  Perform Diagnostics on the memory and hard drive tests.

• I can't install windows vista SP2 and problem with SP1

  So I installed SP1 with windows update and each update, it says service pack 1 in the list of installation. Second problem, I downloaded the file for SP2 and when I open it it just comes up with the error message "these data are incorrect."

  Hello

  Click Start > right click on computer > left click on properties > see if you have Vista 32 bit or Vista 64-bit installed.

  It will also tell you which SP you have installed.

  Then, choose the download of 'bit' OK to use to install Service Packs, first of all the installation of SP1.

  Vista SP1 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=30

  Vista SP1 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=21299

  Vista SP2 32-bit (x 86): http://www.microsoft.com/en-us/download/details.aspx?id=16468

  Vista SP2 64-bit: http://www.microsoft.com/en-us/download/details.aspx?id=17669

  This Information Microsoft can help you resolve problems that you encounter during the installation of Service Packs for Vista.

  http://support.Microsoft.com/kb/947366

  See you soon.

• For Windows 8.1 and XP dual-boot

  After buying a desktop PC HP Pavilion 500 - 245ea last week, I find now that I can't run a significant number of programs I use on my XP Machine, and instead of running two PC, I need to set up this new PC with Dual Boot installation.

  To do this, I need to partition the hard drive and install Windows XP first before installing Windows 8.1, which is difficult with a preinstalled windows 8.1 already on the PC and no record of widows 8.1.

  Please notify

  Hi, Jack:

  I don't know of any PC, you can get today who have the support and drivers for Windows XP.

  Al I can say is that if you want a PC based on an Intel processor, you cannot get one that has a 8-series chipset.

  Intel 7 series and older chipsets support drivers for XP somewhere - not necessarily have HP.

  Then, you also have to make sure the graphics and audio chips drivers XP.

  Try to get a PC with the Realtek HD audio chip.  Realtek has XP drivers for audio.

  Best regards

  Paul

• No network, but only with Windows 7 Boot Camp

  I don't know if this is a problem of "Windows 7"or a problem of 'Boot Camp', but when the Boot Camp partition is virtualized within a session of OS X, it fails to make any network connections. "  Various distributions of Linux - Fedora, Ubuntu, Puppy - everything can be browsed, a virtualized XP, 7 all simply not possible.

  Ipconfig says:

  Name of the host...: BigWin
  Primary Dns suffix...:
  Node... type: hybrid
  Active... IP routing: No.
  Active... proxy WINS: No.
  Tunnel adapter isatap. {17E42B75-9F79-4113-B5AD-48F20E1649DB}:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Microsoft ISATAP adapter
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes
  Card tunnel Local Area Connection * 13:
  State of the media...: Media disconnected
  The connection-specific DNS suffix. :
  ... Description: Teredo Tunneling Pseudo-Interface
  Physical address.... : 00-00-00-00-00-00-00-E0
  DHCP active...: No.
  Autoconfiguration enabled...: Yes

  It is the same, if the virtual machine is set to "Bridged" or "NAT".  This is the second version of the Fusion, I ran and I had similar problems with the previous.

  Very confusing.

  OK, VMnet2 was created by VMware Fusion when you selected "connect directly to physical network (bridged) Using: Ethernet" in the Boot Camp: network configuration.  The vmware.log file, I see that you have played a bit with the settings of network tries a bit to get this working.  All you need to do is remove all the network adapters in the Boot Camp: network settings, then add a single network of return and set it to NAT.  Then, you should have an Internet/network connectivity assuming that the host is.