What is 8.55 PeopleTools remote administration

Similar Questions

• a remote administrator can have the rank to the owner, the administrator of the customers

  I am running Windos XP with service pack 3, I have a virus in my computer that no program antivirus can detect, my security log is remote administrator to register with the Local Service with four or five packages of Microsoft authinication, list only several trust logon names and gives them a high permissions, and lists about 8 of my firewall as exceptions , he also started several processes, when I try to fix some computer programs tells me that I have not permissions, even if I am the owner and I am logged as long as administrator a single program has the remote control as the lead director and the owner as the customer administrator, Windows XP Home addition isn't supposed to have areas and networking etc., so I want to just whether the remote administrator known as field NT Authority, with the opening of network service session, has the ability to have the high level of administrative control, ranking much more to say, but just get this a response now. Thank you

  Re-ask your question here instead:

  Windows XP Service Pack 3 (SP3)
  http://social.technet.Microsoft.com/forums/en/itproxpsp/threads

• Can I disable the remote administration for the WRT1900ac?

  The Linksys administration console used a simple checkbox to enable or disable remote administration.

  Maybe I'm missing it, but I've looked everywhere in the console of the WRT1900ac and I see nothing on remote administration. Can I disable it?

  And if not, why not? Disabling remote access (assuming that it is not necessary) is always one of the best suggestions to secure a router.

  Thank you

  Andy

  It will not access or enabled, unless she has been associated with.

• Remote Administration is NOT working at all - WAG200G

  Hi all

  I recently placed a WAG200G to my home DSL and everything works fine.  I do portforwarding for my apps and all agree, except that I can't get the remote management works on the internet.  I tried with the default ports 8080 and personalized (5566, 77556, etc.) and none answer IE firefox or IE are upward in "cannot display the page" or "Connection reset".

  "I read by train port 443 can work so tried, it appears the SSL warning to my wonderment, but once past security, towards ' cannot display the Page.  I also read 4899 port SHOULD BE OPEN to remote management work, but not clear what he meant by OPEN the port since the portforwarding section would not help pass a port to the gateway itself... isn't it?  I tried in vain with 4899 chosen as management port, as well.  Well, I used a WAG54GS recently which was not hard at all, just put any port and bingo remote management is in your hand.

  I dyndns to collect my changing IPs, I've disabled the firewall and unchecked "lock anonymous Internet requests", SNMP is disabled assistant management remote etc...  I can also successfully telnet to my current host of property intellectual/dyndns public my remote management and telnet port is in.  So no ISP is no player here, its opening.

  

  What could be the cause?

  Hi insaf_mohd. Try again using port 8080. Enable remote management, use port 8080 for the administration Port, and then click the Security tab and uncheck block anonymous requests WAN/Internet. Don't forget to save the settings. I hope this helps!

• View of remote administration office

  Hello!

  How can I distance administer (connect) on the desktop of the virtual user identically VNC simultaneously with the user?

  vSphere Client show me the black screen.

  For example, the MS Office administration...

  You can allow the "Open Console" option through a GPO.

  Via the PCOIP.adm file, enable the following:

  Computer configuration-> policies-> administrative templates-> classic administrative templates-> Variables of PCoIP Session-> Overridable by default is-> enable access to a session of PCoIP from a console vSphere

  After activating, you should be able to open the console and see what's to see the use. However, open the console was not the best option for us in our environment. We cannot resize the window so that we can see all of their screen. We must continually scroll down the window to move. What a pain! So, we decided to find another method and finished with Assistance remotely. You can enable the assistance remotely via GPO. You enable the setting here:

  Computer configuration-> policies-> administration-> system models->-> Configure offer Remote Assistance Remote Assistance

  
  

  After that you enable this setting, enter the desired account that are allowed to offer assistance, you can create a shortcut to %windir%\system32\msra.exe /offerra after you run the shortcut, simply enter the name of the computer and you will be asked your username to allow you access to their computer. We didn't mind the access request. He did our users feel more secure. They think we cannot see their screen without their permission, however, if you need to enter into their computer without their permission, you can use the function open the Console in vSphere.

  I hope this helps!
  

• What are the solutions for remote use unauthorized computer via a virtual private network?

  Dell Dimension E310.  Windows XP. Professional.   "Media Center". 5 years old.  Stand alone computer.  Unsolicited 'demand' come across the screen for remote access.  Wallpaper, next to the clock, someone downloading of graphics file "Accelerator" without authorization.   Called internet provider.  They claim that they do not deal with the configuration of the virtual private network. Tech said there is more than one device connected to my computer!
  I went to "Computer management" and delete all except myself as a user and the administrator.  Obviously, too late as a person UNKNOWN has defined itself as "NT Authority\Authenticated Users".  Locked computer: would not recognize my password.
  Formatted drive / reinstalled windows.  Able to use the computer for "allocation of 7 days; my computer then froze again.  AT and T Tech indicates that UNKNOWN use of my computer and no recourse.  Are there solutions to the unauthorized use?

  Hello

  I suggest you post your question Forums Technet for assistance on this issue.

  Windows XP Service Pack 3 (SP3)

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

• Newbie question: in what configuration file < flex: access remote destination > tags go?

  I seem to have read the document integration spring/Blaze about 10 times, but I don't know where to put all my < flex: access remote-Ref destination = "yaddayaddaService" / > tags.  I don't want annotation allows you to set these remote destinations.

  Should it go in the spring configuration file that I use for the servlet of AMF endpoint (as specified by the contextConfigLocation parameter).  Or they go to a high-level cross-servlet configuration file?

  What is the usual way to deal with these?

  Hello

  The convention is to declare:

  1 declare the Spring beans (for example yaddayaddaService) in the files specified by the parameter contextConfigLocation.

  2. Add the Spring - Flex specific configuration (configure message agent, declare destinations) in WEB-INF\flex- servlet.xml, assuming that you have configured the model of Message Broker URL as follows in the web.xml file:

     
          Flex
          org.springframework.web.servlet.DispatcherServlet
          1
     

     
          Flex
          messagebroker / *.
     

  The repository SVN BlazeDS/distribution contains the spring sample webapp (spring - samples.war) that you can watch as well.

  Hope that helps.

  Rohit

• ATER ADDING A SECOND HARDRIVE MY COMPUTER IS NOT ALLOWING ME to SAVE music to what HE SAID I'm not administrator that he

  Recently, I added a second hard drive and now although I can access my files from the original hard drive, it doesn't let me download files outside such as CD as it says I need to "contact the administrator"! Can you please help me solve this problem? Thank you.

  Hi Paul,.

  In Microsoft Windows XP, the special access permissions are customizable sets of permissions. This means that you can apply special access permissions to files or folders that are located on NTFS file system volumes. This article describes how to set, view, change, or remove special permissions for files and folders.

  Method 1: To take possession of the drive in disk management:

  a. click the Start button,

  b. Select Control Panel,

  c. click Administrative Tools then computer management

  d. open disk management.

  Method 2: Change the drive letter:

  a. click on Start

  b. Select Control Panel

  c. open Administrative Tools

  d. Select computer management

  d. select disk management in the section at the bottom left. You can change the drive letters on the right.

  See the article:

  How to set, view, change, or remove special permissions for files and folders in Windows XP

  http://support.Microsoft.com/kb/308419

  Please post back with the result.

• What is the problem with Remote Assistance?

  I was able to use assistance remotely via Live Messenger for several years to help other people.  These days, the request will not be sent other peoples at the mine, or vice versa. Most of these comps that I am trying to take control of, I did so dozens of times before... Oh yes, this problem started, he would send but couldn't connect (about 1-2 weeks), but now there are not sent.  I also can't send or receive a whiteboard or share an activity; Basically, nothing in the Menu activities.  Although the games work. Any ideas why this is happening?

  Hello James.Orr,

  If this problem is specific to only Windows Live Messenger, please see the link of support below.

  Windows Live Messenger

  http://windowslivehelp.com/product.aspx?ProductID=2

• What high port of windows remote desktop XP use?

  I have a system with 63 customers on them and I need to use remote desktop and computer management tools, but our service HERE must know which ports need to be open can someone help me with this?

  It seems that it is port 3389.

  Go to this site and click on the last question:

  <>http://Windows.Microsoft.com/en-us/Windows-Vista/Remote-Desktop-connection-frequently-asked-questions >

  HTH,
  JW

• Without WiFi Smart remote administration

  Hello

  is it possible to access the WRT1900AC of the interface "the old-fashioned way", using a dedicated port? In this case, you would what port?

  I would avoid using the way of Smart Wifi:

  1. with big companies be hacked, I won't have my password network stored somewhere on a Web server
  2. the Smart WiFi IOS app has all the features of the router (such as the use of the internet) and the app is the only way to connect to the router on an IOS device, in order to better connect directly to the router

  Thank you

  cpipojoe

  Not with the Linksys firmware

  Once the 3rd party firmwares are more developed (OpenWRT, DD - WRT, etc.) so you can get more features with those advanced.

• Wag160N remote administration

  I managed to put all this and I know I'm getting a connection to the router, but it does not appear the admin page.

  I put in https://xyz.gotdns.com:8080 he asks me o authenticate the certificate and then enter my username and password but then it shows:

  

  Y at - it an ip block pass with the router? that is, should I tell him to accept my work i.p. address remote management?

  OK turns the back of the linksys search page is a bug.

  I was chatting with linksys Webcam live chat and they sent v1.00.10 and I use dynamic dns to login the router correctly. If I use v1.00.15 it produces this search page.

  They assured me that they will send it to their laboratory technicians, somehow, I won't hold my breath.

• Remote administration of a PIX running as a VPN client

  Hello

  I have a setup where a PIX501 works as a VPN client upward against my central VPN3000 concentrator (LAN-2-LAN with NAT - T mode).

  External interface of the pix is behind a firewall managed by ISP to the remote end, and get it via DHCP IP address.

  So far so good. This configuration works hotel.

  The problem is that I can't ssh/telnet to the external interface of the PIX due to this configuration.

  Would it not possible to ssh/telnet to the remote pix _inside_ interface?

  I guess stuff NAT Bennett, but I can't make it work.

  Any ideas?

  (: O) Mikkle

  This is possible by commands:

  management-access inside

  It works very well as I have used both inside interface is included in all the crypto config

  Sam

• Remote Administration Gui + memory required?

  I use the free version of the hypervisor and I was wondering if there is some kind of remote management gui available.  My server will be in a data center and I want to be able to manage the VM if possible.

  In addition, my server has 16 GB of ram and I intend to put 2 mV; R2 2012 Windows and Ubuntu Server.

  How hypervisor ram himself does need?

  How much ram can I assign to each virtual machine? (I mean that they have equal amounts)

  You can use the vSphere client to connect to your host?

  ESXi itself has a very small footprint in terms of memory. In production environments, I see the hypervisor itself use somewhere around 200-300 MB. You could make 2 x 6GB for your virtual machines and still have "spare" 3GB for a little another VM in the feature. If you want to allocate memory the best I would go with the Windows configuration to 8 GB and Ubuntu to 6 GB, or just the opposite according to the functions they perform.

• The scenario that is balanced with two static routes without remote administration.

  Hello

  I'm setting up a switch 3750 PSI using MHSRP provider on the side. In fact I use two GigaEthernet connections.

  I want to create my side by using the static routes of load balancing, but traffic flows that I see are not identical or similar.

  See the router # running | Start iproute

  [...]

  IP route 10.0.0.0 255.255.0.0 10.255.255.1
  IP route 10.0.0.0 255.255.0.0 10.255.255.6

  [...]

  Router # show ip route

  [...]
  S * 0.0.0.0/0 [1/0] via 192.168.0.254
  10.0.0.0/16 is variably divided into subnets, subnets 23, 5 masks
  10.0.0.0/16 S [1/0] via 10.255.255.6
  [1/0] via 10.255.255.1

  [...]

  Either way, ip cef is already activated

  Here is the result:

  Interface 1

  GigabitEthernet1 is up, line protocol is up (connected)

  [...]

  Strategy of queues: fifo
  Output queue: 0/40 (size/max)
  5 minute input rate 35046000 bps, 4638 packets/s
  5 minute output rate 8671000 bps, 3846 packets/s

  Interface 2

  GigabitEthernet2 is up, line protocol is up (connected)
  [...]
  Strategy of queues: fifo
  Output queue: 0/40 (size/max)
  5 minute input rate 1000 bps, 2 packets/sec
  5 minute output rate 3859000 bps, 1714 packets/s

  IP CEF:

  router ip cef #show
  Interface of the jump following the prefix
  10.0.0.0/16 10.255.255.1 Vlan99
  10.255.255.6 Vlan99

  I have no configuration is no longer on the interfaces. I would add the ip per instruction packet load balancing?

  By default cef uses per load balancing destination, set ip load balancing by package on the concert links try again, are your equal to up to 10 links network on each side