What is a kind of LAN wireless and module integrated Bluetooth that 9470 m support?

Similar Questions

• What is the maximum. Size (GB) and RPM HARD drive that works in a Compaq CQ62-219WM laptop PC?

  What is the maximum. Size (GB) and RPM HARD drive that works in a Compaq CQ62-219WM laptop PC? Want a 750 GB 7200 RPM.

  davidljtn44

  Hello

  1. RAM: please look at this: (total 8 GB max).

  http://www.crucial.com/upgrade/HP+-+Compaq-memory/Presario+CQ62+series/Presario+CQ62-219WM-upgrades.html

  2. HARD drive: no problem. It can use 750 GB 7200 rpm or more.

  Good luck

• How to set up LAN wireless and wired for simultaneous operation

  I use a Lenovo thinkpad running windows XP. I want to set up an independent network so that I can connect my hardware for debugging. At the same time, I want to be able to access the corporate network using the wireless interface.  My autonomous network consists of a Belkin router that is to act as a DHCP server, my laptop connected to a port on the router and my test material connected to a different port on the router. My wireless interface is configured to connect to the corporate network. With wireless interface and the ethernet interface (wired) enabled, when I am doing a config ip, I see that the devices get valid IP address, corresponding to subnets, they connect to IE the ethernet port gets IP address 192.168.x.x 172.x.x.x IP poster wireless interface while. But I am not able to ping or access sites on the internet, I am able to ping the router Belkin on the independent network.

  However, if I go under network connections and disable the ethernet connection to the local network can access the internet and my business network. Similarly, if I disable the wireless connection and that you enable the ethernet connection, so I am able to ping the router only and not my test equipment connected on the same subnet.

  If I configure the (wired) ethernet network interface to use a static IP address in the pool of IP from the router Belkiin (who is also a DHCP server) and set the IP Address of the Belkin router as gateway, I can access all the other devices on this local subnet if and only if the wireless interface is disabled.

  The search for networks order is defined as the wireless and Ethernet.

  In my case, I need two interfaces to be active at the same time, as explained at the beginning. Appreciate any suggestions.

  Thank you.

  Hello

  The question you posted would be better suited to the TechNet community. Please visit the link below to find a community that will provide the support you want.

  http://social.technet.Microsoft.com/forums/en-us/itproxpsp/threads

  Hope this information is useful.

• Just upgraded to windows 7 Professional and now it won't let me connect to my wireless and it is said that no network hardware is detected. What should I do

  I'm crazy. Someone help me. I have three papers to write and 3 exams to take.

  But you can use the computer you're on now to download and save the drivers to a flash drive?

  Go to the support page for driver hit computer manufacturer and make meanings,

  Then, install the network drivers. Once you have installed, you should be good to go for other drivers and everything you do when connected to Internet...

• What is the difference between General LV and LV RT considering that I want to read the output of a sensor of temperature online?

  Hello world

  I am very new in LV and I need to read my temperature sensore outputs online so that necessary system changes each time the temperature changes. If I use genral LV or LV RT?

  Thank you

  Hi elahetal.  The LV vs LV RT decision really depends on what are your needs of the moment.

  RT is not necessarily to be as fast as possible, but rather as consistent as possible.

  If you have a measure which must be taken every 100mS + / 2 ms to practically use RT a generalist OS like Windows will be randomly off the coast and do other things (read a cd, the printer, the disc index, etc.), causing your position to be late.

  A RT environment will allow you to determine precisely at the time where the system should do what.  The compromise is that the RT environment is somewhat limited, because you do not have all the bells and whistles, practitioner OS.

  If your action must be taken every 15 years + / 10 s then you can very well get away with standard LV on a PC.

  In some cases, a combination works well.  For example, RT on FieldPoint or CRIO to manage the time of sensitive issues and LV on a PC to manage the analysis of data and user interface.

  Hope that helps, please specify your needs if you wish.

  Matt

• Network connection wireless and cable - Internet access that allows on a computer that is connected to the network cable connection to a networked computer

  I have 3 desktop PCs. Machine A is Win 7, the B machine is XP, the C machine is XP.

  Machine A is connected to the router via cable and internet connection works. Machine B is wireless (the same router as a machine) and the internet connection works when I used that machine has b. Now I plugged in the machine C B machine with a crossover cable and wireless internet machine B does not work.

  I tried the IP and gateway addresses manually (since deleted). If I ping the computer A to B I get the answer to time to stop and even if I ping the B to A computer. However ping computer B to C and C to B work.

  I hope that I have omitted some important parameter, if anyone can point me in the right direction

  Hello

  If the bridge, the connection between C and B is the first to be configured with a static IP address that is on a different subnet * and then fill.

  Alternatively, you can use ICS, http://support.microsoft.com/kb/306126/en-us

  * On the subnet

  Classical IP looks like this (example), 192.168. 1 .x the first three groups are also called subnet, they identify specific network, x can be a number between 0 and 255 and it identifies each unique device on the network.

  An IP address of 192.168. 2 .x would be a subnet to another network.

  To assign a static IP address, see http://www.howtogeek.com/howto/19249/how-to-assign-a-static-ip-address-in-xp-vista-or-windows-7/

  Jack - Microsoft MVP, Windows networking. WWW.EZLAN.NET

• XDCAM and Canon XF formats that are not supported in the first CC 2014

  Having improved first Pro CS 6-CC 2014 (v8.0 / 2014.0.1), I find myself unable to import media to Canon XF or XDCAM format.

  When you navigate to these folders from media, the Prime Minister refuses to import these files into the timeline. When you select a video file, first get a message "Format file not supported".

  I tried two ways to install Premiere Pro:

  -Via the single installer downloaded from the Adobe site.

  -With Adobe Creative cloud conditioner.

  Facilities have been made on an own OSX 10.9.4 system.

  In both cases, the same result, the files cannot be opened (only VLC is able to read).

  Any ideas how to solve this problem?

  OK, finally, we found the solution:

  We have two different serial numbers for our Creative Cloud ENT licenses, one of them is labeled EDFUL No. 15, the other V15.

  It seems that installation using the N15 series allows to launch the first, but does not activate the XDCAM and Canon FX video codecs.

  When installing with the V15 serial, the codecs are enabled.

  Now, it would be interesting to know more precisely what products are covered by serial number (we found no specific information in the dashboard licensing.adobe.com).

• Difference between Standalone Converter and converter integrated with VMware vCenter Server?

  What is the difference between Standalone Converter and converter integrated with VMware vCenter Server, except that it comes integrated with Vcenter and another does not?
  Please confirm is there the technical differences between them?

  Also take a look at the Release Notes for vCenter Server 4.1.

  of http://www.vmware.com/support/vsphere4/doc/vsp_esx41_vc41_rel_notes.html

  VMware vCenter Converter plugin. VMware vSphere 4.1 and later versions of the update and patch are the latest editions of the VMware vCenter Converter plugin for vSphere Client. VMware will continue to update and support the free Converter Standalone product, which allows conversions from sources such as physical machines, machine formats virtual VMware and Microsoft and some third-party disk image formats.

  André

• Wireless, lan usb and pci is not installed

  Hi, I just bought a new g001sx 15 HP and installed Windows 7 Professional 64 bit. After you install the operating system of my lan wireless, LAN, USB and PCI devices is not installed, I don't know what to do. installing drivers atheros already tried and it didn't work. I have already inserted an image that shows that some of my drivers are not detected.  Thanks in advance.

  Hello:

  Here are links to the drivers you need...

  First install the amd chipset drivers and reboot.  You want the first file on the Web page.

  This will install the smbus and usb 3 controllers.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2064

  Then, install the beta amd radeon catalyst graphics driver.

  http://support.AMD.com/en-us/KB-articles/pages/latest-catalyst-Windows-Beta.aspx

  If the amd chipset driver does not install the usb controllers as advertised 3 that he would, and then download and install these two...

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417&SP...

  http://h20565.www2.HP.com/portal/site/hpsc/template.page/public/PSI/swdDetails/?sp4ts.Oid=5359417&SP...

  Ethernet controller: DL and install the 2nd driver on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=14&PFID=7&level=5&Conn=4&DownTy...

  PCI device: DL and install driver 1st on the list.

  http://www.Realtek.com.tw/downloads/downloadsView.aspx?langid=1&PNid=15&PFID=25&level=4&Conn=3&DownT...

  In order to provide me with the wireless driver which you are interested, please do the following...

  Go to Device Manager and click on the network controller needing drivers.

  Then click on the Details tab at the top of the control of the network window.

  Now, you see a drop-down list of property and it is set by default to the Description of the unit.

  Drop down on it and select the second item in the list (Hardware ID).

  After the first string of characters that start with PCI\VEN.

• Wireless and LAN problem with Thinkpad

  Im having serious problems with my Thinkpad T61p on my wireless and LAN drivers (at least I think it is the drivers, could be something else). This can be a long explanation, but please bear with me.

  Yesterday, after seeing an example on the net, I tried to connect my xbox 360 to my laptop. I thought I'd be able to play on the xbox wireless using the laptop as a gateway to my router. I never had any problems before with logins, and had the wireless on my home network.

  After plugging in an Ethernet cable into the laptop and xbox (following the instructions, I had online), I became "Network connections", (start-> Control Panel-> network connections). I had used a cable to connect your desktop to my laptop before and normally when you go to network connections, the connection between them appears as an icon. This time, has no icon.

  I decided to try and create a connection. At this point my wireless was still working because I was always browsing the net. On the left sidebar, I clicked on "create a new connection". Hit next, and then click the radio button "set up an advanced connection." "Accept inbound connections" option box pressed, the next button. Finally, a link has been created, but when I went to go again my wireless connection dropped. I went back and removed the link to "network connections".

  I opened "Logins" and tried to connect to my home profile. No results. I tried clicking on 'Search' to see were there any other networks available and all I kept getting was: "the wireless radio is turned off. You want to turn on? ". Press 'Yes', landmark of waiting a few seconds, click on 'Search' again, same message. No matter what I did, I couldn't get the wireless to turn on. So I found this thread:

  http://forums.Lenovo.com/LNV/board/message?board.ID=T_Series_Thinkpads&thread.ID=3314&view=by_date_a...

  and decided it was best to update access connections. It came as a default as version 4.42 so I updated to 5.12. Rebooted and tried again. Now the wireless starts up fine, but when I look for my router connections, some networks are located.

  Next to this thread:

  http://forums.Lenovo.com/LNV/board/message?board.ID=Special_Interest_Utilities&thread.ID=524

  I updated my drivers and countless other things without success. I've updated wireless drivers from this page and dial-up connections to:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?sitestyle=Lenovo&lndocid=MIGR-67853#wireless

  Another strange thing I see is that when I try to 'Create a new connection' 'Network connections', select 'Create a home or small business network', keep the progression through each other, it is to choose connections it is said that both my wireless and LAN are disconnected.

  Wireless that I use is: Intel Wireless WiFi Link 4965AG

  LAN: Intel 82566MM Gigabit Network Connection

  It is not to have problems in Device Manager and that these two are enabled.

  Does anyone have an idea of what is after occurrence and how I could fix this? Any help is greatly appreciated, because I need it for work soon.

  It sets obtained.

  Essentially had to uninstall the network drivers (not enough I know) from Device Manager and reboot. After the wireless and LAN is back!

• WIRELESS and wired LAN do not know each other

  My internet provider installed a new cable modem, without capacity WIFI because I have an airport extreme base WIFI (with cable Express extensions).  Speed and quality are OK, wireless and wired, but there seems to be a wall of China between WIFI and wired (LAN): devices that are connected via a cable to my LAN are not visible from the wireless network and vice versa.  Airport extreme is not 'Bridge' mode ("because not of wireless on the new modem capability".)

  No idea of the reasons for this?  Thank you very much

  Sounds like the configuration of the device. With the airport devices it can operate as a device on the network or another firewall as its own network. I think that it is way jumpered to activate, this will allow you to configure the wireless on the airport, but your current router will do the DNS/DHCP and will be a single network.

  Now that you have configured as two routers on an independent network as there is no bridge.

• Can what comparison be made between time capsule and Smart RG s505 wireless modem router for wifi

  Can what comparison be made between time capsule and Smart RG s505 wireless modem router for wifi

  Superior...

  After all, the chip is mainly a modem.

  Wireless is there but not designed as the primary connection.

  Wireless 802.11n 300Mbps AP with 2 x 2 MIMO Wireless bridge, WDS multiple SSID, including isolated invited SSID WiFi QoS (WMM) and PowerSave wireless security: • Wi - Fi Protected Access (WPA, WPA2) • AES, TKIP, WEP encryptio

  It is the Wireless N standard.

  The TC is dual-band simultaneous AC1750... even if in fact apple never leaves anything use 300mbit on the 2.4 GHz is more like AC1450... It is also 3 streams on both bands not 2 x 2.

  The fact that aid.

  The only thing to note is that a router from Apple can join never a router wireless not apple... so, there must always be plugged in by ethernet.

• Sometimes, I connect to other unsecured wireless and do not want to. My wireless 802.11 was swept away in several times, what causes this and is at - it a hotfix?

  I have an old toshiba phone that has msn phone dial inside program I use wire and that you don't have a phone number to put in what should be iI or is there a ms download

  I have xp home edition Service att tech and and when I take the computer to reinstall says the same thing > I have also a gateway that has the same problem, I sometimes connect to other unsecured wireless and do not want.  My wireless 802.11 was swept away in several times, what causes this and is at - it a hotfix.

  Hello

   

  I suggest you send your query to the solution Center MSN for better support for this topic:

  http://answers.MSN.com/

   

  Also suggest checking with you ISP provider

  http://www.att.com/eSupport/

• Can I connect to the Deskjet 3050 wireless and LAN?

  I have connected to a new deskjet 3050 by WiFi. My laptop and iPhone worked well. I have an old desk top that has no WiFi. Can I also connect it to the 3050 by LAN? The office is connected to the router by LAN so it mails to my hpeprint but I would like to connect it directly to the 3050.

  Hello

  The HP Deskjet 3050 include wireless connectivity options and USB, the printer does not include any LAN interface...

  The printer connected to your wireless router, connection from the desktop to the same router via an Ethernet connection is sufficient, the type of conntaction used network is not serious as long as both devices connected to the same router.

  Make sure that ethernet cable connected to your router with a desktop computer and run the installation by selecting the wireless connection, the device should be detected on the network...

  If you wanted to can use a USB for PC connection, you can do the same. the wireless and USB connection can be used simultanly.

  Shlomi

• Volume/Mute, MediaSmart, control the volume and the buttons of LAN wireless outside the computer does not.

  I have problems with my Hp Pavilion Windows Vista computer. The main buttons that are used for volume control, button shortcut MediaSmart, mute and LAN wireless button that are all on the upper part of the keyboard next to the power button do not work. I tried to restart manually, using the Application of Service used a different sound card, and reinstall but nothing works. The volume control goes up and down by itself if you tap the volume control box or not. Help, please!

  http://welcome.HP.com/country/us/en/contact_us.html

  Contact HP at the link above.

  http://h30434.www3.HP.com/

  HP's Support Forums at the link above.

  Ask in the Forums of HP as it may be a known issue with HP products, or they can advise how to enable them.

  See you soon. Mick Murphy - Microsoft partner