What is an XPS Document? Can I safely delete it from my hard drive?

Similar Questions

• How can I transfer encrypted files from old hard drive removed (transfer windows easy?)

  Hello

  I'm trying to get some files off my old hard drive encrypted. He has xp on it, and I can't start on my new computer. Since it is a separate, apparently, I can't do either windows easy transfer. Is it possible for me to locate the certificate and key, or to transfer files with the key and the certificate on my new computer (I have password from the old computer if I need that)? Can I somehow run WET on this hard drive for keys/certificates can be transferred. This seems to be a common problem from what I have read.
  Otherwise, do you have ideas on how to start my old xp disk on my new system without reformatting?
  Very important to get these files.
  Thank you!

  First of all, I assume you mean encrypted files (EFS, Encrypting File System).  These files are encrypted with a key that is still encrypted in your system like a certificate.  In order to read your encrypted on any other system files, you must restore the certificate from a backup.  The short article is mandatory for anyone considering the use of EFS:
  "Best Practices for encrypting file system"
      <>http://support.Microsoft.com/kb/223316 >
  Special attention to the subsection down titled "why you should back up your certificates.

  HTH,
  JW

• How can I find the RPM from my hard drive

  How can I determine the speed rpm from my hard drive

  How can I determine the speed rpm from my hard drive

  You will have to drive using the number of research model. Press on + R (for example, run) and type or paste in devmgmt.msc , and then click OK.
  When the Device Manager opens, expand disk drives and note the model of your HDD (s).
  Pop the model number in Google (or your own favorite search engine) and you should not even go to another page to get the spin rate. as well as the manufacturer, capacity, interface, etc...

• Can't access the files from the HARD drive of any account on the windows computer 7

  Hello

  When I tried to connect my Western digital external hard drive to a 32-bit desktop P 3 with a Windows XP SP1, then this HARD drive is not detected. Then I tried to copy his WD driver ITS a USB Flash drive, then isntalled all the WD HARD drive was always plugged into my computer. After that, the HARD drive was identified by computer and appear in my computer. As I thought that this folder has been created by the installation of the driver, did not exist on my HARD drive before connected to the desktop computer.

  When I plugged my WD HDDagain to my laptop HP with Windows 7 SP1 64 bit and I tried open this folder, and then the main folder only opened without facing access denied, however, access to all of its subfolders, and the files inside it has been declined.

  In addition, althoguh the username admin Curernet "Mohammad" can open the folder of human "83f04ce083fb03083bb88e50", as shown in the screenshot above, it can not access all of the subfolders, files in the main folder, and to access, I will need to use the scecurity tab. Thus, it would be absolute nonsense, if I want to have access to all of the subfolders, I will need to use the security for each tab.

  How do I gain access to all of the subfolders with use of the Security tab once the time (i.e. as long as all subfolders are inside the main folder, then simply use the main folder security tab?

  

  As long as the current username "Mohammad" can open the folder of "83f04ce083fb03083bb88e50" man, "Mohammad" is so allowed system to have access to the main folder as shown in the screenshot above, then I think that the username 'Mohammad' will have to reach all subfolders as well. However, when you try to open any subfolder or file, then the current user 'Mohammad' name could not have access to all of the subfolders in the main folder and all subfolders or files opening gave me this error below (screenshots below)

  

  

  I tried to remove this main folder, however, each time, I found myself with a loop "you need permission SYSTEM to make changes to this file.

  

  Original title: file access denied

  Groan.  It is so easy to fix, and you should have gotten a lot better support now.  Surprisingly, the worst suggestion came directly from the "Microsoft Support Engineer" Reda Singh, his suggestion potentially compromising the security of your computer while doing absolutely nothing to solve the problem.  Fortunately, it seems like you didn't do something quite right and so the script was not run.

  First of all, let me explain why this difficult access occurs in the first place.  Originally, you had three 'users' granted access to training, SYSTEM, Administrators, and Mohammad.  SYSTEM allows Windows to read your disk, and retrieve things like its label.  It can also allow your antivirus software to access the drive.  Because this OPTION is enabled, Administrators is not accomplish anything, even if you are an administrator.  As long as this OPTION is enabled, this permission only works for programs, that you manually raised to run as administrator.  This leaves access to the drive depend on the last entry, Mohammad.  The problem is the SID behind Mohammad is only good on the computer, it was created, so if you connect this HARD drive on another computer, no access is allowed!  Enter the security on the other computer dialog box, you can either see something "could not read permissions" or you will see the SYSTEM, directorsand a third entry with a long series of numbers.  It's your first computer Mohammad , and it will not work on another computer.

  It is not surprising that you're facing this problem because you are using the drive on multiple computers, which is running XP that is not UAC.  Here's how to unlock a storage drive (in Windows 7) so that it can be normally accessed in any PC without any permissions problem:

  1. Press [Windows] (or click on the circles to start), and then type "user account control".
  2. In the search results, click on "change user account control settings."
  3. Drag the slider to "never notify".
  4. Click [OK] to confirm the changes and restart your computer.
  5. Open Windows Explorer, right-click on the affected drive, and then click Properties -> Security (tab)-> [Advanced]-> owner (tab)-> [change].
  6. You should be on a dialog box that asks what you want to change the owner.  Click on Administrators.
  7. Check Replace owner of subcontainers and objects, and click [OK].  Windows should start processing all the files on the disc.  This may take a few minutes.
  8. When it's done, click [OK] to close the property message and then close out of all other dialog boxes.
  9. In Windows Explorer, click the drive affected again, and then click Properties -> Security (tab)-> [Advanced]-> [edit permissions].
  10. Now in the dialog box Advanced security settings , click the button [delete] repeatedly to remove all permission entries.
  11. Add SYSTEM and grant full control.
      1. Click on [Add...].
      2. Type 'SYSTEM' and press [Enter].
      3. Check full control in the allow column and press [Enter].
  12. Add Administrators and grant full control.
  13. Add users and grant Full control.
  14. In the dialog box Advanced security settings , you should have three entrances of permissions: SYSTEM Administratorsand users, all granted full control.  Check "Replace all permissions of child object with permissions inheritable from this object" and click [OK].
  15. Click [Yes] to confirm the replacement of permissions.  Again, Windows start to process all files on the disk, which may take a few minutes.
  16. When he finishes, close to all the dialog boxes and check that all records are now accessible.  You may have to refresh (or close and reopen) explore to see the changes.
  17. Assuming that it worked, we will re-enable UAC to reduce the vulnerability of temporary security, that we created earlier.  Press [Windows] and then type 'user account control '.
  18. In the search results, click on "change user account control settings."
  19. Drag the slider to the position below the top (position #2, by default).
  20. Click [OK] and restart your computer.  Now, the files remain accessible.

  This should straighten the permissions of your disk storage so that you can use it again.  You may need to empty the trash on this drive after changing permissions.

  Don't do this procedure on your C:\ drive, it will seriously reduce the security of your Windows installation.  This is for the readers of storage only.  If you need access to a specific file that you created to C:\, you can safely do the steps above on this issue, but never on the C:\ drive itself.  Please note that when you perform this procedure on a folder instead of a hard drive, you will need to replace this step #10:

  10. now in the dialog box Advanced security settings , uncheck the box "Include permissions can be inherited from the parent to this object" and click [delete] to confirm.  If some permission entries remain, click [Remove] until they are all gone.

  The concept is the same in Windows Vista, even if the exact steps differ from the foregoing at least Windows 8.  In Windows 8, you must also disable UAC with a registry tweak because, unlike Windows 7, UAC remains on even when the value of "Never notify", giving rise to all sorts of problems in Explorer tries to work with file permissions.

  Oh and to answer one other question I saw you ask from the beginning: this folder of the .net Framework was created by .net Framework Installer.  He breaks all the rules and frustrating unpacks his junk everywhere where it feels like.  I got it decompress on a front SD card, making the installation would take forever.  After installing the .net Framework, you probably disconnected the drive before restarting your computer, so these files let me.  Or the installation crashed and started you again.  Meanwhile, installs the failure left its Temp files behind.  It was supposed to remove the folder when the installation is complete.  You can remove safely as the folder manually.

• Satellite L40: How can I recover the files from the hard drive

  Hello

  Can someone help me please. About a week ago I started to have a clicking sound coming from my laptop Satellite L40. My laptop froze and when I restarted, I was directed to the system configuration with a message at the bottom saying
  "Pri Master Hard Disk Drive SMART status bad, Backup and replace."
  Press F2 to assume. »

  I pressed F2, but I don't have any idea what to do?

  Can someone tell me how do I backup my files until my HDD disappeared completely or if it was can I use another device to get down them.

  I tried using the recovery disk, but the disk does not respond?

  Help, please

  Pete

  Hello

  This message looks like a warning of S.M.A.R.T. notification
  This means that your HARD disk will eventually fail.
  It can happen in the next few days or it can't happen for a few months but the SMART feature has detected that the drive is wrong then it should be replaced as soon as possible.
  It seems that your laptop is not very old, so the warranty should cover all replacements.

  I see only one way to access and back up the data. Eventually, you could buy an external enclosure SATA USB HARD drive and was able to connect the HARD drive to another computer.
  I don't know if you will be able to access the HARD drive because of the failure, but if you want you can try this m.

  Good luck

• Satellite A200 - 196 how can I restore the Partition from Toshiba hard drive?

  I need to restore my hard drive to factory default.

  I tried now pressed the 'Zéro' key at startup, also tried one at a time, hold down F2 and F8, F10, F12, but none of them put me in the Recovery Wizard.

  I searched the help files on the PC and online but nothing helped.
  Someone at - it an idea how I can get into the recovery partition it please?

  Hello

  You should be able to start the installation of HARD drive recovery as described in http://aps2.toshiba-tro.de/kb0/HTD9102IR0000R01.htm

  Please note: this will not work if your laptop works with the factory settings. If you have used clean OS installation HDD recovery no longer unavailable. For the installation of factory settings, you must use disk recovery DVDs.

  Everything must be described in the document s user manuals.

• How can I transfer my bookmark from a hard drive?

  My notebook recently damaged, I cannot access what now, the only way to access it, is to format and install new windows. For now I am with my new laptop, all my bookmarks Mozilla Firefox & data recorded since the old notebook disappeared. But I still have the old hard drive of the laptop and use it as external hard drive. So I wonder what is the destination to all my folders of bookmarks from Mozilla Firefox, so I can save & have all my favorites back?

  Hey wreck,.

  see the article for recovery of data from an old profile .

  Kind regards
  Tobbi
  Firefox Support volunteer

• Vista went blue screen and computer chap installed windows 7 for me and paritioned my hard drive can I remove the section from my hard drive vista

  don't need anything on this subject but load anything sections c and d of new points has the space so I geta message that there is no space

  How to change a hotmail password

  Hello

  My advice to you is to take the person to the computer and get windows 7 resettled corredtly

  If you have vista installed on a partition, it can be deleted, but we do not know how your operating system have been implemented by them

  and for Hotmail issues:

  I'm sorry, but we cannot help with hotmail problems in these forums in response to vista

  Please repost your question in hotmail in the hotmail link below forums

  http://windowslivehelp.com/product.aspx?ProductID=1

  Forums

  E-mail client and the appliance issues

  Hotmail Sign In questions

  Lost or deleted emails

  People and Contacts

  Reading, writing, and formatting mail

  Sending and receiving mail

  Sign in, and sign to the top and account security

  Using the Hotmail calendar

  Using Web Messenger

   

   

  Consult with Microsoft Certified Solutions

  How to work the views Active Hotmail?

  Your account has been temporarily blocked

  What to do if you can't connect to Windows Live Hotmail

  Compromised account - unauthorized account access

  Reset your Windows Live ID password

  Error when you try to send an e-mail: your message seems to have triggered our spam filters.

  Change your Windows Live ID password

• What is the best way to copy all the files from one hard drive to another?

  Old disk 60Go new 320 GB drive.  I want to do the new replacement for the old disk drive.

  Old disk 60Go new 320 GB drive.  I want to do the new replacement for the old disk drive.

  Use disk cloning software.

  The safest way is to use an external hard drive enclosure to maintain the new disc during the cloning operation.  These come with interfaces USB or e-SATA to IDE or SATA interfaces for the drive and the computer.  Be sure to get the correct type.  If you have an available internal drive Bay, you can put the new drive it for the cloning operation, but do NOT restart with two connected drives.  After everything was settled down, you can mount the old disk of 60 GB inside, format and use it for storage of backup.

  Cloning (copy to disc) software may have been bundled with your new drive or may be accessed free of charge from the manufacturer of the new command.

  Otherwise, here are a few apps cloning that I have used myself or have been recommended by members of the community:

  Acronis True Image Home
  Casper
  Paragon Drive Copy
  EASEUS Partition Master

• Can I delete data from my hard drive program files

  I have Vista Home Basic on an Acer Aspire5315. I bought 200 GB of RAM. Now I have less than 10% room on the drive C of ACER. There are a lot of Data\Microsoft\Search \Data program files on the hard drive. I can remove them?

  Hi Judith,

  You should not delete these, program data files are stored by Applications you have installed on your computer. If you delete, it will make these programs to crash.

  RAM memory is a temporary memory to keep track of things that are open (among others), it does not affect the storage space. In addition, there are no 200 GB of ram.
  Download and install CCleaner, which can cancel the entire space that Windows generates throughs months/years of use here: http://www.piriform.com/ccleaner
  Then once it is installed, quit all browsers you have open and run CCleaner
  Then click Cleaner (the icon of the brush).
  Then check all the boxes in the Internet Explorer category
  Check all the boxes in the category of Windows Explorer
  Check all the boxes in the category System (and for each one you receive, press OK)
  Click on the Applications tab, and then check all the boxes in there.
  Now click the Run Cleaner button
  That will clear all the clutter.
  Now, if you click on Tools
  Click on the Uninstall tab
  Here you can see the list of programs that you have installed
  Select any software/tool bar you don't need and click run program uninstaller.
  That will save you a lot of space on your drive.

• How can I recover my data from my hard drive? or continue to install my windows 8 with no loss of data?

  I have deleted (formatted) my windows 8.1:

  Disk 0 Partition 1: Recovery, and

  Disk 0 Partition 2

  A single disk rest "Drive.
  I tried to install my windows 8 8.1, now I'm stuck with a Dell Inspiron that cannot load it is current windows and I can't afford to format because it locates all my data.

  Please help with possible recovery options, that I may have? The last thing I tried was buy an enclosure and place my 500 GB HD inside, how ever I saw the first two aforementioned HD

  Help, please

  Hi, I found the solution, I had to plug my hard drive in a case then:

  1. restart the machine with Windows 8.1
  2. determine the parition of "EFI system" with the disk management utility
  3. Run as administrator command prompt
  4. typediskpart
  5. type select disk 0 then select partition 2 thenassign
  6. He will appear in my computer that he did as a player

• What is microsoft xps document writer and xps Viewer and how to use it?

  What is microsoft xps document writer and xps Viewer and how to use it?

  Original title: xps document writer and Viewer

  Hi arunin,.

  An XPS document is a file that is saved in the XML Paper Specification, or .xps, file format. You can create documents XPS (.xps files) by using any program that you can print from Windows; However, you can only view XPS documents by using an XPS Viewer, such as the one included in this version of Windows.

  See: http://windows.microsoft.com/en-in/windows/what-is-xps-viewer#what-is-xps-viewer=windows-7

  http://Windows.Microsoft.com/en-in/Windows-Vista/print-to-the-Microsoft-XPS-document-writer

• Can I safely delete the D partition on the HARD drive?

  Second question: my laptop came with the HD in two partitions, C and d is there a purpose for this and I can easily (safely) delete the D partition?

  You can do what you want and you can create a partition but HARD DISK with two partitions has since. All important data, you can save the second one (D). If something is wrong with the operating system you can install it at any time on the partition c. on this way, all your data will still be there.

  The delivered use recovery media, you can use the configuration option and select installation on already created the C partition.

  I recommend you leave him with two partitions.

• can I safely delete .mst files?

  Original title: .mst files

  can I safely delete .mst files appear on my desktop.

  Hi Bob Paine,.

  1. who is the operating system installed on the computer?

  Give us a few names of the. MST files that you have on your desktop.

  . MST is a transform Windows Installer Setup file. MST files are used in conjunction with the Microsoft Windows packages install (.) Files. (MSI).

  Do not delete the .msi files.

  Suggestion:

  Check if you need to view the files and folders option in Folder Options. If checked, uncheck the box and see.

  What is a hidden file?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-a-hidden-file

  I hope this helps.

• After you import an image (.jpeg) file for the Photos on my Mac app, can I safely delete this image file to save space on my hard drive?

  After you import an image (.jpeg) file for the Photos on my Mac app, can I safely delete this image file to save space on my hard drive?

  Yes, you can remove the file from the imported image, if you have imported the image as managed.  IE preferences in ave Photos settled on "import: copy items to the photo library" being the default.