Can I delete data from my hard drive program files

Similar Questions

• Question about deleting data from the HARD drive

  Hello

  The C drive on my computer satellite phone is almost full, 1.21 Gb free of 55.7 and drive E has 10.9 GB 36 GB free. How can I solve this problem. I am not concerned by what is deleted. It can go if you have to.

  Slowing down the laptop down to something serious.

  Any help would be great.

  Hello

  It seems that drive E has little more free space
  So, you can move some files like photos, movies, files pm3 or any that you have stored on the partition, the partition E.

  You can also reduce the E partition and can add free space on the C partition.
  To do this, you must use a 3rd party software
  I recommend using a freeware tool called * Gparted.*

  How to get it? Google is your friend ;)

• Recovery of data from a hard drive.

  I have a hard drive that was used to store data (i.e. The drive D:\).  Suddenly, it is not recognized as being in the format and/or I'm unable to access the data.

  You can use data recovery software to restore your data from your hard drive inaccessible. The I know is Remo Recover (Windows), it's a good recovery software. It supports recovery of files from the formatted hard drive. It can also recover your partitions deleted from your hard drive.

• HP dv9000 vista laptop won't start. Cannot 'fix '; BIOS Diagnostics: all GOOD except Hard Drive check result: replace the hard drive NEED the data from this hard drive!

  HP dv9000 vista laptop won't start. Attempt to restore repair result several times cannot be made online. BIOS ran diagnostics, everything was good except the hard disk, hd chk result: replace the hard drive. F11 entered to access advanced hp Recovery Manager options tempted towards the top of the entire disk, all files show while listing to back up, attached to my external hard drive current over the back with success.  Plugged external on another laptop, new files since the previous backup are no where.  Should I buy a new external hard drive and repeat the backup via Recovery Manager Advanced Options or should I remove the internal hard disk and insert it into a case and apply in usb on another laptop to view the files.  I know when my computer crashed, I had too many windows/tabs open and too much process and tried to interrupt a process and I confused his little brain and now he has Alzheimer's disease.  I am freaked because I'll lose everything 2012 including some very important documents and about 50 000 pictures HD (yes I learned my lesson backup!) I am in crisis mode because I recently became sick and my photos and documents is vital for my next year of chemotherapy and radiation. Please advice are extremely appreciated. Thank you

  Hello

  This backup after pressing F11 is a HP backup option, not a Microsoft option.

  I suggest that you contact HP or ask their Support Forums.

  http://h30434.www3.HP.com/

  It's the normal advice I'd give to record data; but we have no idea of the State of your hard drive.

  Saving your files:

  You can remove the hard drive and put it in a hard drive USB enclosure > plug it into another computer > and try to read and copy your data in this way.

  Or, you can download Knoppix > make a bootdisk to > start your system with it (IF your material is all work) > and copy your data from the hard drive like that.

  http://Knoppix.NET/

  See you soon.

• How can I play DVDs from my hard drive with windows XP?

  How can I play DVDs from my hard drive with windows XP?

  If you have a decdoer of installed dvd, usually with packages like power dvd etc that allow you to watch a dvd in your dvd drive, and then later versions of Media Player will also play your DVDs, and all of these programs that play said removable DVD.

• How to copy data from one hard drive to another after the upgrade?

  I have a HP e9220y, and I recently bought a new hard drive for it. There is nothing wrong with the former, but this one has a 64 MB cache and 7200 RPM so I hope it will be a little faster. I installed it and it works fine, but I want to copy all data from the old disk to the new so I can start everything off the faster hard drive and I seem to have a bit of doing wrong. I can't just copy and paste because of the Windows system files that are used. And last night when I set up Windows backup, and went to bed, when I thought it that Windows has recovered from a stop unexpected, rebooted, and only 2 GB of data saved obtained.

  What is the best way to move all the data from the old drive to the new drive, make it the default C: drive and move partitions system and factory_image as well? Thank you!

  Please read this link to another post made by Big_Dave and myself

  http://h30434.www3.HP.com/T5/desktop-hardware/hard-drive-imminent-failure-problem/TD-p/438567

  (1) If your old drive and the new drive is Seagate or Western Digital, then free House with their cloning software.

  (2) before starting the clone process, I found best to perform a disk cleanup and defragmentation.

  Cloning software to copy the two partitions. Example:

  Old drive 250 GB formatted to 232 C: created 220 and 12 GB D:

  New 1000GO drive formatted to 931 GB created 919 GB C: and D: to 12 GB

  The "Seagate disc Wizard" cloning software will let create you a clone automatic or manual partition resizing.

  The two modes to offer an overview of the actions before commit you. The manual on this page of Seagate (PDF) is 68 pages.

  After the cloning process he complete, all you have to do is swap on the disks. Besure to connect your new disc on the original motherboard SATA port.

• A satellite will not start - how to back up data from the HARD drive?

  Hello
  My laptop won't turn. How can I take backup of internal hard drive?

  Please read my writing as soon as POSSIBLE

  If you n t have access to your saved data remove the laptop HARD drive, connect it to the other PC as external device and you should have access to all stored data if the HARD drive is not defective.

  What you need is USB 2.0 IDE 2.5 HD enclosure disk hard drive / external case/Box.

• erasure of data from the hard drive?

  Hey Microsoft, I have a problem

  I had two boot(win_xp_pro_and_win_7_ult).they are the two 32 bit.

  so I tried exchanging win xp with win vista ult 32 bit (download, NOT on the cd).

  I started to install and after 4 5 steps made my pc restarted and it stuck at "Please wait windows is to configure your computer" or something similar to this for 30-40 minutes.

  I rebooted it and started on win 7 I started by now. I tried to start the whole process of win 7, hoping that it will not get stuck, but he said I need space on my hard drive I got previously from win xp. So I opened up Explorer and I have seen that there are a few new files (from win vista).

  I tried once more (started on vista) and my pc has been blocked for the same post in front. So I decided to free up space and tried to format the hard drive, but I received a message(on_win_7):Windows was unable to complete the format. I tried to delete all the files, but I've done worse thereby; I get error file missing at the start of vista. I have the installation files on my win 7 and I want to delete everything on my hard drive.

  Please help and thanks in advance!

  Hello

  You want to eventually dual boot Vista and Windows 7.

  And make a Bootable DVD from the downloaded ISO of Vista.

  And Neosmart has instructions on how to burn ISO disk images using imgburn:

  http://NeoSmart.NET/wiki/Burning-ISO-images-with-ImgBurn/

  "Install multiple operating systems (multiboot).

  http://Windows.Microsoft.com/en-us/Windows/install-multiple-operating-system-multiboot#1TC=Windows-7

  "How to set up a Dual Boot Installation with Windows 7 and Vista"

  http://www.SevenForums.com/tutorials/5166-dual-boot-installation-Windows-7-Vista.html

  "Dual Boot computer preinstalled Windows 7 with Vista.

  http://www.howtogeek.com/HOWTO/8834/dual-boot-your-pre-installed-Windows-7-computer-with-Vista/

  http://apcmag.com/how_to_dual_boot_windows_vista_and_windows_7_vista_installed_first.htm

  See you soon.

• How can I recover my data from my hard drive? or continue to install my windows 8 with no loss of data?

  I have deleted (formatted) my windows 8.1:

  Disk 0 Partition 1: Recovery, and

  Disk 0 Partition 2

  A single disk rest "Drive.
  I tried to install my windows 8 8.1, now I'm stuck with a Dell Inspiron that cannot load it is current windows and I can't afford to format because it locates all my data.

  Please help with possible recovery options, that I may have? The last thing I tried was buy an enclosure and place my 500 GB HD inside, how ever I saw the first two aforementioned HD

  Help, please

  Hi, I found the solution, I had to plug my hard drive in a case then:

  1. restart the machine with Windows 8.1
  2. determine the parition of "EFI system" with the disk management utility
  3. Run as administrator command prompt
  4. typediskpart
  5. type select disk 0 then select partition 2 thenassign
  6. He will appear in my computer that he did as a player

• What is an XPS Document? Can I safely delete it from my hard drive?

  Divided between the thread: http://answers.microsoft.com/en-us/windows/forum/windows_7-performance/what-is-an-xps-document-can-i-safely-delete-it/e70e7323-129d-4d74-ae39-28bb10b4f656

  I know that this question is two years old, but I have the same question more certain. I noticed there is no 'useful' response so I was wondering if you have already received an answer?... Thank you for your time. :)

  Priscill salvation,

  We need more information to help you, please answer the following question.

  1. On the place where the XPS Document is saved?
  2. Why you want to remove the XPS Document?

  XPS document are not related to Windows system files, you can remove the hard drive. See the following links for more information about the XPS Document:

  What is the XPS Viewer?

  http://Windows.Microsoft.com/en-us/Windows/what-is-XPS-viewer#what-is-XPS-Viewer=Windows-7

  XPS documents: Frequently asked questions.

  http://Windows.Microsoft.com/en-us/Windows/XPS-documents-FAQ#1TC=Windows-7

  Hope the helps of information. Let us know if you need help with Windows related issues. We will be happy to help you.

• Data from external hard drive not visible

  My computer has been recently infected with the virus to restore Windows. As soon as I was aware, I unplugged my network cable and a drive external hard (without using to remove the device safely), who has all my data. I then used a previous restore point to get rid of the virus, which was apparently with success, because there is no remaining trace.

  Now, the external hard drive is not visible in Explorer. Other utility programs say that the data is always there, but I can't see it or access it in the usual way. This drive worked perfectly up to this point. I tried to restart, unplug the external drive and reconnect it and using a different USB port, but so far nothing has worked.

  How can I get Vista to recognize my external drive?

  Hello

  Run the system restore will be not delete or remove the virus on the computer. System Restore helps you restore system files from your computer to an earlier point in time.

  First I suggest you to run the check, and online virus scan if no malware or viruses detected on the computer activity. You can run the scan for viruses online from the link below: http://www.microsoft.com/security/scanner/en-us/default.aspx

  NOTE: Make sure that you select the correct version of the operating system before downloading the scanner)

  For the problem with the external hard drive, follow the methods below:

  Method 1:

  Check if the device is detected in Device Manager. Follow the steps for the same thing:

  a. click on start

  b. click Run, in the Run dialog box type devmgmt.msc

  (c) in the Device Manager window, locate the drive

  Method 2:

  Run the fix it from the link below and check if it helps. Link: Hardware devices do not work or are not detected in Windows: http://support.microsoft.com/mats/hardware_device_problems/

• How to transfer data from one hard drive to another?

  I don't know how and has been upgraded to a new hard drive...

  Hello

  Well, it may be quite simple, if you install the new OS in the new drive.

  Then you connect the older HARD drive, and you should be able to explore the contents of the HARD drive in windows and copy the data from the old disk to the new. Be careful with what is selected in the BIOS startup disk.

  But depends on the unit you have, because you might end up having several types of questions.

  You can also use any kind of external card, depends on the type of connection of HARD drive you have and for example, if its SATA, you can simply use a SATA to USB adapter.

  Let me know if this helped.

  Thank you

• recover data from a hard drive from the old computer

  my windows 7 computer motherboard is dead I replaced it with a computer of windows 8. I pulled the hard drive from the old computer and transformed into a USB external hard drive, when I tried to copy the files of personal data (access denied) how can I get my data

  http://support.Microsoft.com/kb/2623670/en-us#method11

• Creating a store of data from local hard drive

  If I wanted to use the free space on the computer host ESXi as a data store, I need to partition the disk hard until I have install ESXi on it or I can do after?

  Default install ESXi uses your hard drive and converts it to a VMFS volume if you install it on local storage. If you plan to use the entire disk, just install ESXi with General settings you will have already created for you a data store.

• How can I transfer images from external hard drive with the gateway settings to new computer?

  I used to use Adobe Bridge on a computer that no longer works. My computer tech then made the hard drive of this computer on an external hard drive. Now I want to transfer all those images with all the settings, I applied them to my new computer. My new computer is a PC with Windows 7 and I run Adobe Creative Cloud on it.

  Thanks for your reply. Where the xmp file?

  It depends on your preferences settings. By default, Bridge is set to store metadata in an XMP file. This is the file that has the same name as the original, but it only use the extension ".xmp" instead of Raw file extension.

  Bridge stores this file in the same folder as the original. If you use Bridge to move the files to another location it selects automatically the xmp files to travel with her.

  If you use the view menu / show hidden files, you will see what Curt meant by XMP are hidden files, all have a document icon.

  If you converted to DNG RAW format this data is written to the file itself, as is the case with other types of files such as jpeg and tiff, that can be managed by the cab.

  You should be able to copy the whole folder to your new system or bridge to the old disk, select the file in the content panel and the use of the Control Panel folder to navigate to the new location and use drag and drop

  Many options