What is disconnecting from the computer

I am a student of the University

When you shut down Windows, all the programs you were using close, but the computer is not turned off.
See sign out of Windows

Tags: Windows

Similar Questions

  • When I start RCT3, I can hear the sound of the game, but the image disappears. It's almost as if the monitor is disconnected from the computer. This could be the cause?

    Original title: race Roller Coaster Tycoon 3

    When I start RCT3, I can hear the sound of the game, but the image disappears. It's almost as if the monitor is disconnected from the computer. This could be the cause?

    Hi Redbaron666,

    Have you checked if the game works the clean boot?

    I see that Rollercoaster Tycoon 3 is not compatible with Windows 7 which could be the cause of this problem:

    Windows 7 Compatibility Center

    Method 1: You can run the game in compatibility mode and then check

    Make older programs in this version of Windows

    http://Windows.Microsoft.com/en-us/Windows7/make-older-programs-run-in-this-version-of-Windows

    Thanks and greetings

    Ajay K

    Microsoft Answers Support Engineer
    ***************************************************************************
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • BlackBerry Smartphones storm of disconnecting from the computer

    I still have to learn. Question, why my time storms goes bad after I log out of Blackberry Desktop Manager. I always have to reset. Also, when I finished my Storm backup on my computer, the image of the home screen I put media disappears and the default image is displayed. I have reset the image of the media, the image is stored on the memory of the phone, no Media Card, and I got my prior engine Razr phone. Way that I disconnect computer storm (I hit "Disconnect" icon on the computer and wait until the computer confirms, then remove storm.) Help please.

    Darned it... my previous answer just went 'poof' into thin air.

    Well, here's a shortened version because I don't really feel like rewrite the newest .

    Go to Desktop Manager, then sync.  Uncheck the box "update device date and time.  Like that, your phone will not change time, every time that you synchronize with your computer.

    Now and then, to the second part, you can simply unplug the phone.  I did since I had and have never had any problems.  If you use mode of storage media (e.g. transfer of files in and out), then you can remove it safely, but if you're just synchronize TI, etc., is not necessary.

  • How to disconnect from the computer of friends?

    Recently, I asked a friend to check my computer it sign me up to her computer, so she could watch her home. I like to disconnect, I am concerned about privacy. (1) how can I disconnect?   (2) how can I check to see if someone else is connected to my computer? Thank you

    you have not specified which version of windows you are using. but generally
     
    1. right click on my computer
     
    2. click on properties
     
    3. click on distance parameters
     
    4. Click to deselect Remote Assistance if it is enabled
     
    5. under Remote Desktop, click on do not all connections to this computer remotely
     
    This applies to built-in Windows functions. If a third-party program like Logmein
    etc has been installed, then you will need to uninstall that.
     
    Restart your computer, once you make the above, anyone who has BEEN connected will be
    loss of access.
     
     
    Barb
     
     
     
     
    Please mark as answer if that answers your question
     
     
     
     

  • Toll-free indicated what power disconnected from the Satellite L30-134

    I don't know it this the appropriate category, because I'm not sure of the source of the problem.

    Okay, here it is:
    I have Toshiba Satellite L30-134.

    Normally, when I unplug the cable of the AC adapter, 2 things happen:
    1 ATP icon shows that the current generator is the battery, and it shows invoiced % and about working time remaining before the battery is empty.

    2. the power management becomes more energy saving settings, and implementation Hibernate just until the battery is completely down.

    Well... Last few days things have changed:

    Now, when I unplug the power cable, the system does not recognize this and she continues to display: ' course Power Source: AC Power ', for the remaining capacity of the displays: "S/o" and the system is not hibernate, because he does not feel the difference.
    I'm not sure that this has something in common, buy, I found that the UPS SERVICE has been stopped, I tried to start it manually, but there is ERROR 2481: the UPS service is not configured correctly.
    Need help, please :-)
    OS: Windows XP, automatic updates, I did not notice if this happen after installation or any other measure of speciffic, I did...

    > Normally, when I unplug the cable of the AC adapter, 2 things happen:
    > 1. ATP icon shows the current generator is the battery, and it shows invoiced % and about working time remaining before the battery is empty.
    > 2. Power management becomes more energy saving settings, and implementation Hibernate just until the battery is completely.

    This process is correct. After disconnecting the AC adapter the laptop switches to the battery power and uses the Toshiba power saver mode the power created for the use of the battery.

    > Now, when I unplug the power cable, the system does not recognize this and she continues to display: ' course Power Source: AC Power ', for the remaining capacity of the displays: "S/o" and the system is not hibernate, because he does not feel the difference.
    > I don't know he has something in common, buy, I found that the UPS SERVICE has been stopped, I tried to start it manually, but there is ERROR 2481: the UPS service is not configured correctly.

    Well the ups (uninterruptible power supply) service could be responsible for this problem!
    If you are not able to start it manually, then it might be a problem with OS software.
    I studied a bit and found this article in the Microsoft Knowledge base about this problem.

    + Cannot start the UPS Service.
    http://support.Microsoft.com/kb/310437

    Good bye

  • What happens if you use your computer, updatesare being downloaded, and you disconnect from the internet?

    What happens if you use your computer, updatesare being downloaded, and you disconnect from the internet?

    Nothing happens.  The download is incomplete and the updates are not installed.  The next time you go on the site to update or the next time that your automatic updates are are that the updates will be downloaded again.

    John

  • When you reply to a post in a yahoo chat room, I suddenly said... you have been disconnected from the chat because you have accessed YAHOO! MESSENGER from another computer or device? That is what it is?

    When you reply to a post in a salon political discussion of yahoo, I suddenly get the message... you have been disconnected from the chat because you have accessed YAHOO! MESSENGER from another computer or device.  I did not as far as I know?  Thank you, Charles

    Hello

    The message "you have disconnected because you access Yahoo! Messenger from another computer or device." appears when you try to connect twice with the same Yahoo! ID. Someone knows your password and he at the same time connecting with you or you have Yahoo Multi Messenger and accidentally logging in twice. One solution is to change your Yahoo! password or not to use Yahoo Multi Messenger with the same ID.

    Good luck!

  • Computer disconnects from the local network after a while

    Hello

    the place I work has a local network with nearly 20 computers.
    One of them is used only to receive some PDF files from the scanner and there our database (PostgreSQL).

    The problem is that, after some time we can not access it via Explorer by typing '\\server' on the address bar, but the connection to the PostgreSQL Bank will continue to operate.

    I have already disabled the drive for energy savings computer network mode.

    What can happen and what can do?

    Thanks in advance,
    Felipe Sousa

    Hi Felipe,.

    Thanks for posting your query on the Microsoft Community.

    According to the description, I understand that your computer disconnects from the local network.

    I suggest you post your query on the TechNet forums , because we have experts working on this type of questions and for you help the better.

    Check out the link:

    https://social.technet.Microsoft.com/forums/Windows/en-us/home?category=w7itpro

    Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

  • What is the command of shortcut for all windows get the information from the computer?

    What is the command of shortcut for all windows get the information from the computer?

    instead of going to the computer / my computer > properties > discover the pc... basic information or go to the control panel...

    just a command for windows xp, vista, 7 for system looking for information....

    original title: what is the SHORTCUT COMMAND to get information from the computer system?

    Hello BlackSecret,

    The keyboard shortcut to get to the top of this information is Windows key + break Attn.

    Who does what you ask?

  • After time computer disconnects from the network

    When I connect to my domain I can open my outlook uses exchange server without password, share my printer on the network, and access to network files.   After some time the printer is disconnected from the network be connected (always available for me no network) my email brings me a password and all shared network files ask me for a password.

    My computer is windows xp pro, we have 2 other xp pro connected machines that do not have this problem.

    I also never lose my internet or the ability to access any network files that I just asked for a username and pword after a few minutes.

    Only way to fix the printer and the problem is a reboot and relog in.

    Hello

    Questions like these are much better handled in the TechNet IT Pro Forums.

    My moderator tools cannot transfer messages on Windows forums, please re - ask you question there.

    http://social.technet.Microsoft.com/forums/en/itproxpsp/threads
    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • My computer is constantly disconnected from the internet and to reconnect I just unplug the cable for less than a second and it starts to work instantly.

    My computer is constantly disconnected from the internet and to reconnect I just unplug the cable for less than a second and it starts to work instantly. Does every 5 to 10 minutes and it gets frustrating. It is not the cable modem because it is constantly connected, and I repeatedly checked.
    I have this problem with all programs on the internet and she does every day and probably every 5 to 10 minutes.

    Hello

    Your router could be suspicious here, you have successfully updated its firmware as a possible solution? And I would like to
    Update your WiFi drivers on computers. How you are positioned in the router? Are there
    obstacles in the path?

    Actually try updating your driver and disabling the network logon.

    Control Panel - network - write down of the brand and the model of the Wifi - double click top - tab of the driver - write
    version - click the driver update (cannot do something that MS is far behind the pilots of certification). Then
    Right click on the Wifi device and UNINSTALL - Reboot - it will refresh the driver stack.

    Look at the sites of the manufacturer for drivers - and the manufacturer of the device manually.
    http://pcsupport.about.com/od/driverssupport/HT/driverdlmfgr.htm

    How to install a device driver in Vista Device Manager
    http://www.Vistax64.com/tutorials/193584-Device-Manager-install-driver.html

    Download - SAVE - go where you put it - right click – RUN AS ADMIN.

    You can download several at once however restart after the installation of each of them.

    After watching the system manufacturer, you can check the manufacturer of the device an even newer version. (The
    manufacturer of system become your backup policies).

    Repeat for network (NIC) card and is a good time to get the other updated drivers as Vista like
    updated drivers.

    I would also turn off auto update for the drivers. If the updates Windows suggests a just HIDE as they
    are almost always old, and you can search drivers manually as needed.

    How to disable automatic driver Installation in Windows Vista - drivers
    http://www.AddictiveTips.com/Windows-Tips/how-to-disable-automatic-driver-installation-in-Windows-Vista/
    http://TechNet.Microsoft.com/en-us/library/cc730606 (WS.10) .aspx

    ------------------------------------------------------

    Make sure you know the details of connection to your wireless router - SSID and password.

    You lose connection when you do and have to redo your logon.

    Control Panel - Network & Sharing Center - right, click Customize - page set of network locations.
    lower left click on merge or delete network locations - REMOVE all instances of your network (and the
    others you don't use anymore) - REBOOT. Start - Connect To log on to the network.

    -----------------------------------------------------

    Check this box:

    Strange problem with Internet under Vista
    http://www.catonett.com/blog/archives/194

    Windows Vista cannot obtain an IP address from certain routers or some non-Microsoft DHCP servers
    http://support.Microsoft.com/kb/928233/en-us

    ----------------------------------------------------

    And:

    Network connection problems
    http://windowshelp.Microsoft.com/Windows/en-us/help/33307acf-0698-41ba-B014-ea0a2eb8d0a81033.mspx

    I hope this helps.
    Rob - bicycle - Mark Twain said it is good.

  • Vista: suddenly, the computer disconnects from the internet (or router) after have been asleep.

    Vista: suddenly, the computer disconnects from the internet (or router) after have been asleep.  I have not changed the settings and reflected on the line for the problem and there are people with similar problems, but the answers (and a few sample photos) do not correspond to my screen.  Vista's automatic updates, so I think it has something to do with a recent update.  I had to restart my computer to access the internet.  Right now, I've changed my settings "Never" Go to sleep.  All solutions?

    Hello.  I found a sample - the person who has the same problem as me, and apparently it worked - but I don't have this option of powersave mode when I get to this tab.

    "Indeed, the ethernet controller properties window had turned on powersave. Thank you 1 million'

  • I disconnected from the home group, but when I try to join the homegroup I can't because I put a password and I forgot the password. What should I do?

    Hello. I disconnected from the home group, but when I try to join the homegroup I can't because I put a password and I forgot the password. What should I do? TQ

    Hello. I disconnected from the home group, but when I try to join the homegroup I can't because I put a password and I forgot the password. What should I do? TQ

    Where can I find my homegroup password?

  • To print from the computer, but can not scan from printer to computer. Tried everything. Disconnected power supply, etc, nothing works.

    Have no problem when you print a document from the computer. Can not scan from printer to computer. I don't know that I've scanned because I went from windows 7 to 10. Printer not repeat myself found computer.

    Hi, Rolland,.

    Welcome to the Microsoft community. I might help you.

    To better understand the issue, I would need more information on your side.

    1. What is the brand and model of the scanner?

    2. Do you get any error messages? If Yes, what is the full error message?

    This problem might have occurred because of these reasons:

    1. Corrupted driver.

    2. Hardware problem.

    Method 1:
    I suggest you to run hardware store and check if it helps.

    (a) press the Windows keyboard.

    (b) Troubleshooting type in the search box and press enter.
    (c) click on material and audio.

    (d) click on hardware and devices and follow the on-screen instructions.

    Method 2:
    If the problem persists, I suggest you to download and install the latest scanner driver\software on the manufacturer's Web site.

    Hope this information helps. Reply to the post with an up-to-date report of the issue so that we can help you more.

  • SOLUTION for your HP printer disconnect and/or constantly disconnecting from the network

    If you are having a problem printing, scanning or fax with any HP printer because of this be disconnected and constantly disconnecting from the network, here again is the fix!

    I thought that this all after several failed attempts with HP Support, my Internet access provider and various troubleshooting tasks including reinstall the HP software and more and more.  Well, through self teaching on internet and exhausting search for 6 months, I FINALLY thought to it.  OMG!  I'm a paramedic (not IT) and a little computer but far not an expert.  I have all of you here!  Nobody seems to have the answer, but I'm sure that I'm doing it to 97%.  Whatever it is, if it please answer and let me know that it worked for you!  :-)

    It doesn't matter if your printer is installed cable or wireless.  You don't reinstall your software, no recycling power of your printers or your router/Modem.  Your printer is unstable on the network and continues to log out or disconnect from the network it is NOT because the software is glitched, it isn't a firewall problem by saying, is not a router problem, is not a problem with your power cord, because most networks use a 'Beach' and IP addresses for security reasons This kind of "cycles" the IP addresses of the devices to reduce the risk of an attack.  A printer is not a threat, but the 'network' don't own human intelligence, so he does not know this.  Here are my step by step instructions on how to basically your printer address IP (static IP) instead of change back through a cycle so drop your printer on the network or disconnected.

    Funny, if you're someone who has had the elements in your print queue, they will not print, and you turn your printer off and on again and suddenly your print... well documents, join my club.  The reason it works is that when you turn on the printer, it starts with the same IP address before cycle.  If you are someone who is sitting there for a while and all of a sudden your printed documents without changing you something... it is because through the cycle of change of IP address, it hits your printers IP address and the network would allow him to print.  Not very funny, I know.  It took me forever to figure out why my printer would print sometimes, but not always.  Since I thought at this point, I can SCAN, PRINT, and use all the features of my HP software installed like HP, Photosmart Essentials Solution Center.

    On your printer, go to menu/Setup/network and press OK.  In the network menu, print a "network configuration page" so you can see the IP address and other settings of your printer.

    Now, back to the main menu on the screen of your printers.  Or you can go to your web browser and type the IP address using decimal numbers too and this will take you to the web page of your printers.  Choose: setup\network, then press OK.  Look for the IP settings and press OK. Choose "manual" instead of "automatic". Manually enter the IP address it as well as the default gateway that you can see the Network Setup page you printed earlier.  Note: If you manually set the IP Address of the printer, make sure that it is outside the range of your router's DHCP. Otherwise you might encounter a problem with IP addresses on your network duplicate. (If you don't know how to do this, write back and I'll explain).  Don't forget to click "save changes".  Now, restart your computer, and print just what you want.  :-)

    A trick I often use with DHCP network printers:
    In printers and faxes, right-click on the printer and select "Properties".  Click Add a new port.  Choose standard TCP/IP port configured for the host name of the printer. Read the host name of the network printer configuration sheet.

    Using my method means that you always connect to the printer even if its IP address changes (which can happen with the dynamic configuration). This does not jeopardize the security of your network.  It shows just your printer to stay put and stop traveling the highway of IP address.  :-)

    The DHCP range is the range of IP addresses that the router distributes automatically as devices to join the network.  The DHCP range is determined by the router and each brand has a range that is set at the factory (which can be changed by you).

    Default value for the DHCP of your D-link is 192.168.0.100 to 192.168.0.199.  Thus, outside the DHCP range est.2 a.99.200 a.254.

    Is a handy cheat sheet attached.

    You can change this interval by entering the router settings page - type the router's IP address in a browser, enter the login information and access the DHCP parameter area (varies depending on router, hunting around).

Maybe you are looking for